Adding authentication details for SMTP server?

Hi,
I know that I need to put the SMTP server name into fr_global.properties as follows:
SMTPMailServer=serverName
But does anyone know how to specify a username/password to log into the SMTP server?
Thanks!

I have installed Application Server 10g, Web Cache. I am facing the following problems regarding authentication...
1) I am trying to open the server console, but it is asking for authentication details....(Username & Password)..what values must be used here?
admin/welcome1 typically.
2)I tried to open SQLPLUS that came along with 10g installation.But am not able to enter becoz of authentication failure. (Username, Password & Hoststring)??
b2b/b2b or sysdba
3)While triyng to install Oracle Integration B2B, it is asking for 4 parameters...
(b2b Schema password...host:port...Servicename...ias_admin password)..
b2b (please unlock the b2b user)
b2b
port : 1521
servicename: Database service name
ias_admin password : password given for midtier installation.

Similar Messages

Continous Authentication Popup for PI server while testing ABAP webservice

Hi All,
While testing ABAP webservice,authentication window for PI server pops up continously.
I have created web service from SE37 for Z function module which is remote enabled.
I can see that service and endpoint is created automatically.
I have also given PI server credentials in SOAMANAGER->Technical Configuration->System Global settings->Access Information J2EE server.
Can somebody please help in testing the web service created from FM.
I have already gone through a lot of links but still need your expertise on this.
Thanks in advace,
Saurabh

Hi
Are you testing through WSNavigator. WSN needs a java stack and you have already set the corresponding setting.
Please check if the User is locked.
I think in gerenral PI credentials will be asked everytime you open WS navigator link.But once you provide the correct user it should not pop up again and u should be able to test.
Regards.
Srinivas

Pricing Details for SQL Server‏

Hi,
I have tried to find pricing detail for SQL Server and found below link. Not sure whether below link include pricing of SSIS , SSAS or SSRS i think so it includes that...?. How much I can pay if I have to use SSIS and SSRS its same per minute or if i have to
use SSIS, SSAS and SSRS its same price per minute ? Please provide details i have to finalize few things...
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/#sql-server
Thanks in Advance
Haseeb Khan

Hello,
Since the question is a license issue, you can call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific
Time) to speak directly to a Microsoft licensing specialist. You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Apple mail losing password for smtp server

Macbook Pro 2.6ghz intel core 2 due 4 gb 667mhz ddr2 sdram OS X 10.5.7
sbcglobal is mail server they are att.
Must use password to retrieve and send email.
Losing password for smtp server.
Is it keychain or what?
keychain is a PITB.
thanks.

Hi Linda,
Launch the Mail application. Then from the Mail Menu Bar, click Mail/Preferences. Select the Accounts tab and then click the Account Information tab. Where you see: Incoming Mail Server ... make sure you password is available. It will be encrypted so all you will see are dots. If the field is empty, type in your password and close the Preferences window. The next time you send Mail, it might ask for the password but only to add to your Keychain. It shouldn't ask for it again.
Hopefully that will do the trick...
Carolyn

Authentication needed on SMTP server

Hi,
We are using Sun ONE Messaging Server 5.2 and Sun ONE Directory Server 5.1sp2. We want to go for authentication on SMTP server. To elaborate on this, when the customer sends mail using our smtp, he has to be authenticated at server level before his mail passes thru the channel.
Please shed some light on how to configure this?
TIA
Regards,
Dharani

First, you do truly need to evaluate exactly what connections need authenticated smtp. If you require all connections, then you will eliminate the ability to receive mail from the internet, at large.
If what you want to do is require your internal users to authenticate, then adding
mustsasl instead of maysasl in your tcp_intranet channel configuration may help.
You should already have saslswitchchannel tcp_auth in there, by default.

Authentication details for Integrtation B2B

I have installed Application Server 10g, Web Cache. I am facing the following problems regarding authentication...
1) I am trying to open the server console, but it is asking for authentication details....(Username & Password)..what values must be used here?
2)I tried to open SQLPLUS that came along with 10g installation.But am not able to enter becoz of authentication failure. (Username, Password & Hoststring)??
3)While triyng to install Oracle Integration B2B, it is asking for 4 parameters...
(b2b Schema password...host:port...Servicename...ias_admin password)..
I have gone through the installation guide as well...but no proper documentation was found for what VALUES should be used in these fields....prompt reply is appreciated..
thanx in advance,
Satya

I have installed Application Server 10g, Web Cache. I am facing the following problems regarding authentication...
1) I am trying to open the server console, but it is asking for authentication details....(Username & Password)..what values must be used here?
admin/welcome1 typically.
2)I tried to open SQLPLUS that came along with 10g installation.But am not able to enter becoz of authentication failure. (Username, Password & Hoststring)??
b2b/b2b or sysdba
3)While triyng to install Oracle Integration B2B, it is asking for 4 parameters...
(b2b Schema password...host:port...Servicename...ias_admin password)..
b2b (please unlock the b2b user)
b2b
port : 1521
servicename: Database service name
ias_admin password : password given for midtier installation.

Is it possible to have different authentication mode for SQL Server Database Engine and corresponding SQL Server instance?

Hi,
I have installed the x64 SQL Server 2008 R2 Express with default settings and run MBSA 2.3 (using default settings too). It shows three SQL Server instances: MSSQL10_50.SQLEXPRESS, SQLEXPRESS and SQLEXPRESS (32-bit). For the first, authentication
mode is Windows, for the rest two - mixed. Here https://social.msdn.microsoft.com/Forums/sqlserver/en-US/03e470dc-874d-476d-849b-c805acf5b24d/sql-mbsa-question-on-folder-permission?forum=sqlsecurity question
about such multiple instances was asked and the answer is that "MSSQL10.TEST_DB
is the instance ID for the SQL Server Database Engine of the instance, TEST_DB", so in my case, it seems that MSSQL10_50.SQLEXPRESS is the instance ID for SQL Server Database Engine of the SQLEXPRESS instance.
I have two questions:
1) How can it be that SQL Server DB Engine instance has different authentication mode than corresponding SQL Server Instance?
2) Why 32-bit instance reported although I installed only 64-bit version?
Also, this https://social.technet.microsoft.com/Forums/security/en-US/6b12c019-eaf0-402c-ab40-51d31dce968f/mbsa-23-reporting-sql-32bt-instance-is-running-in-mixed-mode-when-it-is-set-to-integrated?forum=MBSA question seems to be related to this
issue, but there is no answer :(.
Upd: Tried on clean Windows 8 installation and Windows 7 with the same result.

Because I DO NOT want the three people who will be having access to the production SQL Server to also have access to the primary host ProductionA. Since I have to allow them to RDC into the box to manage the SQL Server, I figure why not create
a separate VM for each one of them and they can RDC into those instead.
Does this make any sense?
Any tips are greatly appreciated. The main reason for doing this is because the three people who will be accessing the box, I need to isolate each one of them and at the same time keep them off of the primary ProductionA.
Thanks for your help.
M
Hello M,
Since you dont want the 3 guys to have access to Production machine A.You can install SQL Server client .By client i mean SQL server management studio(SSMS) on there local desktop and then create login for them in SQL Server.Open port on which your SQL server
is running for three of the machines so that they can connct.Now with SSMS installed on each machine each can connect to SQL server from there own machine.
I would also like you to be cautious with giving Sysadmin privilege to all three of them ,first please note down what task they would do and then decide what rights to be provided.
Your option will also work but you need to create 3 VM for that .Which is more tedious task.
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Wireless user authentication detail at syslog server

Hi Dear. I configurated wireless network. i want to see my wireless user authentication detail(ip address, username and if it is possibly mac-address) at my syslog server. i do some configuration, the wireless controller send something to my syslog server but i need exctahly the user authentication detail.
how i do that? please help me. thank you veru much.

Hi dears. please help me

Settings for SMTP server

Hi Team,
Our SMTP server is not ready.. Can anyonne help me to setup the server.
Thank you very much inn advance
Hari

Do you have a mail server (not SAP) that SAP app server can connect to (over network)?
If yes, you can do it; if not you need to have a mail-server first.
- SICF - activate the SMTP host/service
- SCOT - follow the SMTP config section of this <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5889">weblog</a>
This is all you need to do.

Error while adding file share for File Server role

I'm getting this error when trying to add a file share on a Server 2012 R2 failover cluster:
"Unable to retrieve all data needed to run the wizard. Error details: Cannot retrieve information from server. Error occurred during enumeration of SMB shares: WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote comptuers within the same
local subnet."
Despite the message, I can still create the share and it seems to work, but I'm concerned there may be an issue and I'd like to resolve it before putting the service into production. TIA!

Hi,
Your error often caused by the WinRM can’t communication to the others node, please confirm all the node “Windows Remote Management” service is running or try to disable your
firewall and AV soft then monitor it again.
More information:
WinRM (Windows Remote Management) Troubleshooting
http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
WINRM
http://blogs.msdn.com/b/powershell/archive/2007/10/30/winrm-exe.aspx
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Which name do I fill in for smtp server

for iCloud, which name have I to fill in for smtp

On your mac or iOS device, just begin by creating a new email account in the email client's preferences or settings and be sure to choose "icloud" for the type of account. the smtp info is filled in automatically.

Need Authentication for SMTP Access

I have this Java program (SendMail.java) for sending email; however, my ISP requires authentication for SMTP server access, i.e. I receive a 550 Authentication Required error. Does anyone know how to go about coding authentication into a program like SendMail so that the userID and password can be sent back to the server?
* SendMail.java
* Created on July 13, 2005, 8:09 PM
* To change this template, choose Tools | Options and locate the template under
* the Source Creation and Management node. Right-click the template and choose
* Open. You can then make changes to the template in the Source Editor.
* @author Owner
// SendMail by Tony Swain.
// Send mail via SMTP
// To do Appletisize it.
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.InputStreamReader;
import java.io.PrintStream;
import java.net.Socket;
import java.util.StringTokenizer;
import java.net.Authenticator;
import java.net.*;
// To do. Finish multiThreading &| write que Thread.
// this programs sends mail Via SMTP as defined in RFC 821.
// ftp://ftp.isi.edu/in-notes/rfc821.txt
public class SendMail
Object mailLock              = null; //In case we want a multi-threaded mailer
public String mailServerHost = "";
public String from           = "";
public String to             = "";
public String replyTo        = "";
public String subject        = "Java is Fun";
public String mailData       =
   "HyperSendMail";
public String errorMsg = "";
public Socket mailSendSock = null;
public BufferedReader inputStream = null;
public PrintStream outputStream    = null;
public String serverReply          = "";
SendMail()
   // Doesn't do anything but we need this for extension purposes.
// Server, from,to,subject, data
SendMail(String server,String tFrom,String tTo,String sub,String sendData)
   mailServerHost = server;
   mailLock=this; // Thread Monitor passed constructor later. Default this Monitor.
   from = tFrom;
   to   = tTo;
   if(sendData != null)
      mailData = sendData;
/* Just a note to remind myself to add this for cross app./Applet & Runnable.
   & Threadsafe readLine() I'm too lazy ATM
SendMail()
   if(mailLock != null)
      if(mailLock instanceof Applet)
         Applet app = (Applet)
public void send()
   if(!open())          //Yikes! get out of here.
      return;
   try
      outputStream.println("HELO sendMail");
      serverReply = inputStream.readLine();
   catch(Exception e0)
      e0.printStackTrace();
   try
      outputStream.println("MAIL FROM: "+from);
      serverReply = inputStream.readLine();
        // I cheat and don't look for the whole 550
        // we know 5 is an error anyway. Add it in if you want.
      if(serverReply.startsWith("5"))
         close("FROM: Server error :"+serverReply);
         return;
   // Note the switch here. we could get mail from somewhere and by
   // pre setting replyTo reply somewhere else :)
      if(replyTo == null)
         replyTo = from;
      outputStream.println("RCPT TO: <"+to+">");
       // Ya got me! I didn't look for any 250 OK messages. Add it in if you really want.
       // A real programmer will spend 30 hours writing self modifying code in order
       // to save 90 nano seconds ;) we assume if it did't give an error it must be OK.
      serverReply = inputStream.readLine();
      if(serverReply.startsWith("5"))
         close("Reply error:"+serverReply);
         return;
      outputStream.println("DATA");
      serverReply = inputStream.readLine();
      if(serverReply.startsWith("5"))
         close("DATA Server error : "+serverReply);
         return;
      outputStream.println("From: "+from);
      outputStream.println("To: "+to);
      if(subject != null)
         outputStream.println("Subject: "+subject);
      if(replyTo != null)
         outputStream.println("Reply-to: "+replyTo);
      outputStream.println("");
      outputStream.println(mailData);
      outputStream.print("\r\n.\r\n");
      outputStream.flush();
      serverReply = inputStream.readLine();
      if(serverReply.startsWith("5"))
         close("DATA finish server error: "+serverReply);
         return;
      outputStream.println("quit");
      serverReply = inputStream.readLine();
      if(serverReply.startsWith("5"))
         close("Server error on QUIT: "+serverReply);
         return;
      inputStream.close();
      outputStream.close();
      mailSendSock.close();
   catch(Exception any)
      any.printStackTrace();
      close("send() Exception");
   close("Mail sent");
public boolean open()
   synchronized(mailLock)
      try
         mailSendSock = new Socket(mailServerHost, 25);
         outputStream = new PrintStream(mailSendSock.getOutputStream());
         inputStream = new BufferedReader(new InputStreamReader(
          mailSendSock.getInputStream()));
         serverReply = inputStream.readLine();
         if(serverReply.startsWith("4"))
            errorMsg = "Server refused the connect message : "+serverReply;
            return false;
      catch(Exception openError)
         openError.printStackTrace();
         close("Mail Socket Error");
         return false;
      System.out.println("Connected to "+mailServerHost);
      return true;
public void close(String msg)
          //try to close the sockets
   System.out.println("Close("+msg+")");
   try
      outputStream.println("quit");
      inputStream.close();
      outputStream.close();
      mailSendSock.close();
   catch(Exception e)
      System.out.println("Close() Exception");
     // We are closing so see ya later anyway
public static void main(String Args[])
SendMail sm = new
// * NOTE:
// Erase these values right away! Just to show you how it is done.
// Whatever you do don' release it with my mail server hardcoded.
// last thing I need is 10 million Java mail test spams :)
SendMail(
          "outgoing.myISP.net",         //Mail Server
          "[email protected]",       // sender
          "[email protected]",       // Recipient
          "Java mail test",               // Subject
          "test test test!");             // Message Data
          sm.send();                      // Send it!
}

There is no one in the forum who can shed some light on my problem?

How to get SMTP server name and SMTP port

hi
i need to send a report to the use to his mail id
while configuring the ibot in mail tab it is asking for SMTP server ,and SMTP port
how we can get these two,.... ?:(
do i have to purchase from vendors, can any one please tell me the process
really i don;t knw, please help me out
Thanks in advance

Hi,
To configure the Mail Server u need to have SMTP server details, which your using as the mail server,either from vendor side or u can use your's domain.For your info iam pasting the Gmail Smtp server details here,
Incoming Mail (POP3) Server - requires SSL:      pop.gmail.com
Use SSL: Yes
Port: 995
Outgoing Mail (SMTP) Server - requires TLS or SSL:      smtp.gmail.com (use authentication)
Use Authentication: Yes
Port for TLS/STARTTLS: 587
Port for SSL: 465
Account Name:      your full email address (including @gmail.com or @your_domain.com)
Email Address:      your email address ([email protected] or username@your_domain.com)
Password:      your Gmail password
Thanks,
Kumar.

Changing Proxy Authentication Details

Summary
After setting up proxy server authentication and successfully establishing a connection through the proxy server to the WibblyWideWeb, it does not appear to be possible to change the authentication details.
I.e. Removing or changing the Authenticator object (Authenticator.setDefault(...);) appears to have no effect once a 'successful' one has already been used.
Details
I have a GUI application that makes connections to the Internet.
It gives the user the option to configure it to pass through a Proxy server when making these connections.
For this, the user may also optionally provide authentication details for the Proxy server (authentication may not be necessary).
(All pretty standard so far...)
Everytime the application wishes to make a connection to the Internet it first sets up the Authenticator.
If the user has provided authentication details then the following code is executed, otherwise the 'default Authenticator' is set to null:
Authenticator.setDefault(new Authenticator()
protected PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(username, password);
});(Again, this is all pretty basic stuff as I understand it...)
With the use of some DBF's ("Developer's Best Friend" - System.out.println("..."); statements) I have been able to detect that once a 'successful' set of authentication details has been retrieved from the Authenticator object, the getPasswordAuthentication() method is never called again.
Therefore, changing the Authenticator with the intention of changing or removing the authentication details has no effect.
One possibility for this happening is because some code deep within the java.net API is caching these authentication details after having detected that they are valid credentials.
Do you have any other ideas?
How can I ensure (without a JVM restart, which appears to be the only current solution) that changes to authentication details take effect?
Thanks for your time.
John

On a Mac, you may need to reset the sync history. As far as I know, not being a Mac user, this is accomplished in iSync. The only other solution that I could think of would be to delete the accounts on the phone, and then sync the phone and see if the new info comes over. However, I believe that resetting the sync history will do it.

SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

Does MAP tool capture User Summary (count of users, their details) for SQL Server 2008?
At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

This is from the
Wiki article:
SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
Datacenter
Enterprise
Business Intelligence
Standard
Workgroup
Web
Express
SQL Server 2008
N/A
Yes
N/A
No
No
No
No
SQL Server 2008 R2
Yes
Yes
N/A
No
No
No
No
SQL Server 2012
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Adding authentication details for SMTP server?

Similar Messages

Maybe you are looking for