Adding Business Content to Transports

Somebody at work has installed some BC without including it in a transport.
Is there any way of finding out exactly what was installed so that I can retrospectively include it in a transport?
I know that the bloke followed a specific building block but obviously in those you select the cube and do a 'in data flow before and afterwards', so it doesn't tell me exactly what was installed.
I wonder... could I just re-install the building block with a transport?

Hi Stuart,
In the Transport Connect (RSA1) you can use settings similar to the business content installation, i.e. Before and Afterwards to collect the related objects. As you mention that this is new content, the objects you need to transport should all be $TMP objects.
Hope this helps...

Similar Messages

  • Business Content instalation & Transportation steps

    Hi,
    iam a new in Sap bi implementation project.so iam gettiong somany doubts abot Business Content instalation & Transportation
    can you help me above concepts step by step,
    Thanks,
    chal

    Please search the forum before posting a thread
    Please do not post duplicate threads
    Business Content instalation & Transportation steps

  • 0TCAIPROV install from Business Content or transport ?

    Hi,
    I need to know : for infoobjects 0TCAIPRO, 0TCAVALID, 0TCAACTVT that don't exist in quality and production, but in DEv I can see them, should I transport from dev to QA/ PROD? Or install them direct in QA/ PROD?
    Thanks a lot

    Hi,
    Ofcosurse you have to install them through business content,collect in the transport request and move it from one landscape to another.
    It will make the landscape consistent and all the issues will get resolved in all the landsacpes.
    Thanks and regards
    Kiran

  • Business Content objects transport request error

    Hi gurus
    We have installed the Business content for CRM in development. Now we have moved the business content objects to Quality, but the issue was all the objects went and they are in the unassigned node. First time the infoarea for the respecitve objects were not selected. In development already the info areas were there, so i didnt select the infoareas for quality. But in quality nothing is existing.So my question is if i select the objects again with thier respective info areas, will i get the objects again aligned in proper order in quality. As already objects are there in unassigned nodes in quality will effect the next transport.
    please help me regards
    vijaykumar

    Hi,
    <i>So if i collect the objects again for transport with the respective infoarea, will i get the objects from unassigned nodes to the respctive info areas.</i>
    It will definately works.
    By the by:
    And also collect respetive Info object Catelogs also.So that Infoobject sits under proper Info area.Otherwise you will get same problem with IO(what you got with Cubes).
    With rgds,
    Anil Kumar Sharma .P

  • Business content -install n transport

    hi ,
    Can any one explain me Business content -install,transport, match(x) & Copy....
    regards
    Rashmi

    Hi,
    Install n Transport is option usually used to install the collected objects and automatically transfer.
    All the Business content objects r by default in the D version .
    we need to activate them to A version.
    Match/copy option , if selected will not write the objects in the datadictionary if they r already activated . this will increase performance n save time . its always recommended to use , else for the first time.
    Regards -- Kumar Sarvepalli /// honor points if helpful

  • Collecting business content

    Hi all,
    I am using transport connection to collect business content for transporting to QA. For a few scenarios, I get a prompt for "customizing request" besides "workbench request", i.e. one customizing and one workbench.
    Is this normal? In what sequence should I transport them later?
    Thanks in advance.

    Hi,
    Customizing request- When functional people used to do the configuration(SPRO settings) in that case request saved under customizing request. You can transport requests from one client to another client in this case.
    In our BW system all requests will come under workbench request. BW system is having one client.
    Keep one package for workbench request separately.

  • Errors while transporting the Business Content

    hi all,
    we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
    it says Method Execution - Action Cancelled.
    am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
       Start of the after-import method for object type R3TR IOBJ (Activation Mode)            
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available 
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
       Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available            
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
    Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L                
    The errors affect the following components:                                    
        BW-WHM (Warehouse Management)                                               
    Ended with return code:  ===> 12 <===              
    please revert bact at the earliest....
    Thanks
    Manicks

    hi Manicks,
    check if oss note 903291 helps
    Transporting DataSources
    Transport problem ...Urgent
    Transport Issue
    Number range object missing NRIV and cant activate IOBJ during import
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    or run program RSDG_OBJNUMG_CREATE_INTERVAL
    have a try oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07

  • TIPP Taxe (Transport Taxe) activation in Business Content?

    Hello,
    I want to know if there is possible to active TIPP Taxe (Transport Taxe) in Business Content?  Thks for your answer!!
    Edited by: Gaudenzio on Jul 1, 2009 11:25 PM

    Chances are that the transport tax is merely a General Ledger account on your Chart of Accounts and would be captured when extracting the data on the 0FI_GL_4 and/or 0FI_TX_4 extractor. At least that's the only recollection that I have when it comes to transport taxes in FI.

  • Business content Transport error

    Hi ,
    I am not able to transport Business content cubes as its giving error " Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
    InfoObject 0CREDITOR is not available in version A"
    although all the objects are active. Please suggest .
    thanks in advance.

    Hi Maneesh Birthwar ,
    Install 0CREDITOR from Business content and then try to reimport ODS request , it should get thorugh.
    Hope that helps.
    Regards
    Mr Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • Installing Business Content directly in QA and PRD or transport it ?

    Hello,
    We have been running a SAP BW Lanscapce (7.01 SPS7) for over two years.
    We have recently applied to our BW Landscace an additional add-on ; SAP SuPM (Sustainability Performance Management 2.0)
    Several thousands of new objects are delivered and we need to install the SUPM Business Content.
    A specific BC installation procedure is described in the installation guide, use the report report RSO_BC_INSTALL_ALL  and not the transaction RSORBCT.
    I intended to activate the SUPM Business Content directlly in DEV then QAS then PRD, as we did when we initially installed tthe three systems.
    The develpent team would prefer to tranfor the transport the newly installed objects fronm DEV to QAS and PRD. They told me that activating directly the BC in QAS and PRD might cause issue for certain objects like transformations. During activation certain objects receive a unique ID hence receiving a different ID in each system. This would mean that we wonu2019t be able to transport changes to these objects from dev and that each change would need to be applied directly in each system which is not acceptable.
    I am not confortable transporting thousands of new objects (even if they are collected in the same transport requests) from DEV to QAS and PRD.
    What are you suggestions ? HAve you already been confroncted to the same problem, having to install thousands of new Business Content objects on an existing BW system ?
    Thank you for your attention
    Best Regards

    Hi Shiro,
    There is one important thing that you should note down is, if you directly install the contents in production system and something goes wrong due to customization or any other thing then there is risk of recovering it and being production system I would say not to do that.
    Where as if you install the contents in development then you will have chance to do the unit testing properly and then send the contents to quality and prod after testing and modifications if required. The risk of failure with transport is very less if the transports are moved in correct sequence.
    Regards,
    Durgesh.

  • Transports of Business Content

    I am having problems transporting Business Content and have decided to take a new approach.  I will transport bottom up.  How can I delete/rollback all the previous transports which have failed.  I have only transported from Development to QA? Thanks

    Hi Niten,
    Sometimes working with the transport connection and business content is wierd. I generally follow the development cycle. 1. What are the info-objects in the cube. If some are not activated then activate them.
    2. Are we loading master data for them then activate the associated objects like transfer structures, treanfer rules, infosourcs, etc.
    3. Is ODS loaded before the cube then activate the ODS and the associated datamart.
    4. Finally activate the cube.
    Follow the same cycle for transports. As when you activate/create some objects add them to your trans port request. This way you do not transport any unncessary objects to the Target system.
    Hope this helps.
    Bye
    Dinesh

  • Transport request for Business Content

    Hi SDN Gurus,
    We have a Fresh BI 7.0 System and we are Doing a CRM implementation project. This requires standard Business Content related to CRM opportunity and Activity cubes. I have installed(Activated) the relevant Business Content for the same. As this is my Development system for demo purpose all the relevant Business Content objects are stored in $tmp package.
    My Question is whether we need to allocate a separate package and Request for Transporting the same(All the Activated Business Content) to QA system or only custom created Objects required to be Transported as a new request to QA.
    Please clarify whether the same Objects ($temp business content) will be available in the QA in activated state or we need to Activate the Business Content in QA also.
    Any help will be rewarded.
    Thanks
    Vish

    Hi Vishwanath,
    You need to put(collect) all the business content objects along with your custom created objects in a separate package and put them in a new request.
    The business content will be activated in Quality system only when you activate these in Development and transport it to Quality.
    Regards
    Prasad
    Message was edited by: Prasad Sarolkar
    Message was edited by: Prasad Sarolkar
    Message was edited by: Prasad Sarolkar

  • Installing only Infoareas from business content

    Hi all
    I want to install the info areas for the supply chain management, but when i selecting the infoareas in business content installation i am getting all the infocubes and ods objects and other objects selected for installation. Please guide how i can install only the info areas from the supply chain management.
    thanks and regards
    bwlearner

    Hi,
    Before you can move the scenario or object selected with Drag&Drop into the Collected Objects window, you can select the grouping function to determine which other Business Content objects need to be considered for the activation.
    Groupings gather together all of the objects of a single area:
    . Only Necessary Objects: Only those additional objects that are needed to activate the objects that you have selected are included (minimum selection)
    . Data Flow Before: All the objects that pass data on to another object are collected
    . Data Flow After: All those objects are collected that get data from one object
    . Data Flow Before and Afterwards: All the objects that both deliver and receive data are collected
    . Security for System Copy: With this setting you can collect only some of the objects for a transport request. This request can be added again after a
    system copy has been made.
    If the collection mode was selected to start the collection manually, the scenario or object can be selected first. With regard to this, the grouping procedure can be selected manually.
    R,
    Adwin

  • Business Content Change

    Hi ,
    Can we change the objects delivered by sap Via Business Content . for example if an attribute needs to be added to an infoObject delivered by business content then can we change the business content infoobject after installing it to ur specific needs . Will it give any error in future while transporting, upgradation etc....
    Regards,
    Vijay.

    Hi Vijay,
       You can make the changes in the infoobjects provided by SAP but you need to map the fields with the help of Exit so that you can populate the data into them.
    Also, the idea should be copying the standard one to your Z object.
    Hope it helps!!!!
    Regards,
    Amit
    Message was edited by: Amit

  • Reg. business content

    hi
    greetings.
    sahall anybody explain step by step of installing the business content.
    thanks
    regards
    sridhar
    [email protected]

    Hi Sridhar,
    In the main menu of the SAP Business Information Warehouse select BW Administration ->Administrator Workbench.
    Select the Business Content function area using the corresponding pushbutton in the left-hand navigation window or by Jump -> Install Business Content
    With the pushbutton  Navigation Window On/Off on the application toolbar in the Administrator Workbench, you can show or hide the left-hand navigation window. We assume that the navigation window remains hidden in the following section.
    If you want to assign source systems, select  Assignment Source System. The Select Source System as Default dialog window appears.
    Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
    The assignment of source systems is only relevant for transfer rules, file DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.
    If you do not select a source system, all source systems are automatically assigned.
    You can subsequently change the selection you made using  Source System Assignment .
    Change the required settings in the following selection list:
    Grouping
    Choose the objects that you want the system to consider. The groupings summarize all the objects of an area.
    Grouping
    Information
    Only necessary objects (standard setting)
    Only those objects that are really necessary for the action, that is, the transport of the selected objects, are taken into account (minimal selection).
    In data flow before
    All objects are collected that submit data to a collected object.
    In data flow after
    All objects are collected that obtain data from a collected object.
    In data flow before and after
    All objects are collected that both submit and collect data.
    If you change the default setting ( only necessary objects), the new setting will be used as a standard for the user.
    Collection Mode
    Select how you want to collect the objects:
    Collection Mode
    Information
    automatic collection (standard setting).
    The data is collected directly when the objects are selected.
    Start manual collection
    The data is only collected when you select  Collect dependent objects.
    Select an Object Type you want to transfer.
    You have various selection options in the navigation window in the Business Content function area of the Administrator Workbench.
    When you select an object type, the arrangement and selection of the existing objects are displayed in the tree structure of the central screen area as below:
    Object Type in the Administrator Workbench Navigation Window.
    Display objects in the tree structure in the central screen area.
    Data targets by InfoAreas
    List of InfoCubes and ODS objects by InfoAreas.
    InfoObjects by application components.
    List of objects by InfoObject catalog and by InfoAreas
    InfoSources by application components.
    List of InfoSources for master data and transaction data.
    Roles
    List of the standard and branch roles.
    Object Types
    List of objects by type (InfoArea, application, InfoObject catalog, role, workbook, query element, InfoSet query, Crystal Reports template, Web template, Web item, saved query view, MultiProvider, InfoCube, InfoObject, InfoSet, Classic InfoSet, ODS object, update rules, InfoSource transaction data, transfer rules, source system, InfoPackage group, InfoPackage, process chain, Reporting Agent, report/report interface, currency conversion type
    Objects in BW Patch
    List of installed BW patches including list of objects newly delivered or re-delivered with the respective patch.
    Package
    List of packages in which there are SAP objects.
    Select the object(s) you want to transfer in the central screen area and transfer them into the right-hand Collected Objects screen area by drag and drop.
    Using  Search for Object, you can also search for objects by a string (for example, 0CUST) or by pattern (for example, 0CUST_*B).
    You can display a value help for every object type: By double clicking on  Select Objects in the tree structure of the corresponding object type, the screen Value Help for Metadata appears. Select the required objects. Choose  Transfer selections.
    You can only use Business Content DataSources of a source system for transferring data in BW, when you have transferred these in their active forms and then copied them into the BW system.
    The system displays the selected object(s) and all dependent objects in the Collected Objects screen area. To reduce the time taken to access the objects when wanting to use them again, the collected objects are stored by default in the Repository Cache.
    When transferring the objects to the Collected Objects screen area, the objects are added at the same time to the tree structure of the corresponding object type in the central screen area and are saved for the respective user. This personal object list is available every time the program is restarted.
    To remove objects from the personal list, select the object in question and choose Remove Object from Display via the context menu or via .
    Objects that are listed in several tree structures are only displayed as changeable the first time they appear. Each time they are listed again, they are highlighted in gray and are not ready for input.
    Check the following columns in the Collected Objects screen area:
    The following Business Content objects are highlighted in the Transfer column by default:
    Objects transferred for the first time
    Objects delivered again in a new version from Business Content.
    When the SAP delivery version and the active version can be compared, a check box is shown in the column Compare (X) or Copy.
    There is a check mark in this checkbox by default. In this case, your version is compared with the new SAP delivery version and complimented.
    If you remove the indicator then the new SAP delivery version is copied in its entirety.
    Date symbol: The object is already available in an active version. However, the active version belongs to an older Content Release. We recommend that you adopt the new version
    Gray Selection : There is an active version in the system, but the object status is given as inactive. The object has to be subsequently edited.
    In the Active Version Available column, there are the following display options:
    Indicator
    Meaning
    No Indicator
    The object is not available in an active version.
    The object is available in an active version. You can decide whether to retain this version or adopt again.
    Change the required settings in the following selection list :
    Transfer Type
    Information
    Simulate transfer
    A test is made to see if errors are likely to occur during the transfer. The most important objects can be checked in the simulation. However, this does not include all dependent objects Therefore, only use the simulation as an orientation help to be able to recognize errors and remove them.
    Transfer
    The selected objects are transferred immediately.
    Transfer in background
    The selected objects are transferred in the background.
    Transfer and transport
    The selected objects are transferred immediately and then written to a transport request in the connection.
    We recommend Transfer in the Background, because transferring a large number of objects and especially changing already active objects can take up a lot of time.
    You can find out if errors have occurred during the installation of Business Content from a log, which you can request using the  Log pushbutton. Repair the errors in the respective maintenance transaction. Try to transfer the Business Content again.
    Hope this Helps.
    Thanks
    CK

Maybe you are looking for

  • CANT READ PDF FILES IN SAFARI

    Was working great. I think I downloaded a .pdf reader. Now Safari won't open file. Any suggestions? Ron Clark Fred Hutchinson Cancer Research Center Seattle WA

  • Trigerring Business Services

    Hi all, I have two questions: 1. Can any body please tell me how to trigger a buisness service ? For example, if we define a business sysem, then we can create an instance of the proxy class and call method execute_asynchronous.? 2. In sxmb_moni, the

  • Pricing Clarification

    Dear Gurus, In Pricing  Procedure how the subtraction is controlled. I do have a selling price and a set of Surcharges. I have a total of the Surcharges and I need to subtract this total surcharges from selling price. It is working fine for unit qty

  • Change exit url logging off portal

    Hello everyone, I wonder if it is possible to change the standard log-in portal screen that apeears after logging off the portal (and confirm it in the dialog that pop-ups). Any idea about this??? Thank you so much.

  • Speaker and main button does not work

    My iphone suddenly fall down and after my speaker and main button is not working. other things are ok. So how can I fix this hardware problem?