Adding contents to Existing web applicaitons

Hi All,
Following link talks of adding contents from oracle content server to exsting webapplications. Does any one has an idea or some sample examples on this.
http://www.oracle.com/us/products/middleware/content-management/revolutionary-one-click-mgmt-ds-077616.pdf
I tried adding Site studio tag libraries to a webapplication, that shows site studio services in the component panel. Such as Placeholder, DataFile, IdcService, which I can drag and drop on the jsp page. When I run the application, it gives me follwoing error
"oracle.stellent.wcm.server.request.RequestException: No sites are configured"
Could you please provide some pointers.
Regards,
Sanjay

Hi
When you have to run the sites / contents from UCM on an external application then you will have to create a Site using SS Designer - Create the Sections / Pges /Layouts . These Pages / Layouts are where your Placeholders would be placed which can be then ported to an existing external application / site and used to retrieve contents from UCM .
If you are using UCM 11g then you can use Jdev to port your existing application on Jdev and add the Site Studio elements / assets to these apps directly . In SS / UCM 11g there is this added capability to have a completely external site (w.r.t UCM) and run your applications .
Hope this helps .
Thanks
Srinath

Similar Messages

  • Adding content to a web page [was: Help with basic question (i think)]

    Hi there everyone, first time in this forum.
    Im creating a website for the first time in dreamweaver after using other programmes and have so far created a banner and nav bar across the left hand side. I am unsure on how i am meant to add any content into the actual centre of my page as there is no box there to write in or add pictures and when i create a image or div or table they all just hug the top of my page and refuse to go next to the navigation bar like i need to it! im sure it is simple but i am finding it so much harder to use than any other programme.
    Im trying to do a list of pictures and descriptions for my mums business.
    any help would be greatly appreciated.
    thanks!
    Harry

    Harry, I have moved your post from the HTML5 Pack forum to the Dreamweaver General Discussion forum, which is the most appropriate place for this sort of question.
    Dreamweaver is a professional web development program that requires at least basic understanding of the underlying web technologies: HTML and CSS. It's not a WYSIWYG program where you can just drag and drop items on a page. To give you a better understand of how Dreamweaver works, it might be a good idea to try the Building Your First Website tutorial here: http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html.
    Since you're new to this forum, I also suggest you take a few moments to read How to get help quickly, and browse through the Dreamweaver FAQ.

  • How to Specify Metadata When Adding Content Using iTunes U Web Service?

    I've been developing Java applications using iTunes U Web service and uploaded content to iTunes U site using iTunes U Web service without problem. Now I want to add metadata fields (name, artist name, album name, etc.) for the tracks I uploaded. It seems to me that "AddTrack" will do. So I tested it but it neither adds a track under the specified group nor updates metadata fields for an existing track. It turned out "MergeTrack" actually updates metadata fields for an existing track. So is there any way to specify metadata at the time of adding content using iTunes U Web service? And what exactly does AddTrack do? This is all about contents hosted by iTunes U site and no RSS is involved.
    I'm referring to the "AddTrack" method in iTunes U Web service:
    http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUWebServices/c hapter18_section_21.html#//appleref/doc/uid/AdminGuide-CH13-SW26

    Thanks for all the replies. My question is whether there is any way to specify metadata WHEN adding content using iTunes U Web service. Specifying metadata AFTER adding content can be achieved by MergeTrack (weird naming) and it does work.
    As for setting track level meta-data in the media file and then upload it, there're several reasons against that, among which are:
    1. Some track metadata are context-dependent. A video about buildings on Michigan Ave in Chicago can be track #2 in a history course and described as "historic view of the Magnificent Mile", but the same media can also be track #5 in a landscape design course and described as something like "contemporary architecture". Setting these metadata in the media file itself is not the preferred way to do it since it implies maintaining a version of the same media for any course/group it gets uploaded to.
    2. Setting metadata in a location separate from the media file helps track the metadata change and search for media without digging into the media itself.
    3. If MergeTrack "updates" metadata, there got to be some other method that "creates" metadata - that's what a well-designed API should look like. And setting metadata in the media file is not an equivalent to a "create metadata" method call. In rickwolf's term, that implicit AddTrack should actually be made explicit so the party uploading content can explicitly specify metadata instead of having iTunes U extract metadata from the media.
    It is still not clear what "AddTrack" does exactly, maybe rickwolf is right - it's only relevant to tracks created through RSS.
    So it seems to me there is no other way to specify metadata WHEN adding content using iTunes U Web service than setting metadata in the media file. To me it is more like a design flaw.
    Message was edited by: Stone Xiang
    Message was edited by: Stone Xiang
    Message was edited by: Stone Xiang

  • Import existing web content.

    Hello,
    We have an existing internal web site that I would like to bring into Portal Page Groups. The content is mostly static HTML with relatively linked images and docs. Is there a script or procedure for doing this?
    Thanks for any assistance.

    To import existing Web content, OracleAS Portal offers a number of content integration technologies (ZIP files, WebDAV, Omniportlet, and APIs) which may help you migrate your existing Portal content/static content to OracleAS Portal:
    1) ZIP file item type (accessible from the add item wizard) - allows you to upload static content and associated images very easily into a portal page/page group - all in just one single operation. Zip File items make it very simple to stage and maintain formerly static HTML Web sites.
    2) WebDAV i.e. drag and drop the content. You can set a default region for which the content ends up in. More information is available at this link below:
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
    3) From Portal version 9.0.2.6 onwards, content area APIs are available. See the portalstudio link below for more details.
    http://portalstudio.oracle.com/servlet/page?_pageid=2746&_dad=ops&_schema=OPSTUDIO&12657_RELEASE2PLSQLHOME_39847486.p_subid=250746&12657_RELEASE2PLSQLHOME_39847486.p_sub_siteid=73&12657_RELEASE2PLSQLHOME_39847486.p_edit=0
    4) Omniportlet & Web Clipping: Web Clipping may be considered for use as an intermediate step to display data from an external site within your Oracle Portal. More information here:
    http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=350276&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0
    Additional information on content integration solutions (not necessarily directly related to your issue) can also be found here on PortalCenter.
    http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=33750&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0
    Best Regards,
    Harry

  • SharePoint 2010 - Create new site collection in existing web application with different existing content DB

    I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes , how?
    I took backup of content database of web application.
    Restored database with different name
    Mounted Content database to this WEBAPP1 by assigning new ID to DB
    Created new site collection by using this newly mounted DB
    Site collection gets created successfully but content does not appear.
    Please guide if i can achieve desired functionality by using this approach.
    If this helped you resolve your issue, please mark it Answered

    It is because the Site GUID is identical, and each GUID can only be present on the farm once. You can use Backup-SPSite/Restore-SPSite (which is full-fidelity, unlike Export-SPWeb/Import-SPWeb), which will generate a new GUID for the restore Site Collection,
    even in the same Web App.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Deploying Existing Web App With New JWS

    Hi all,
    I've been banging my head against a brick wall for a few days on this, but I'm sure it must be something trivial. Hopefully someone here will have some advice...
    In a nutshell, I'm working on an existing web application, running on Weblogic 8.1, in a clustered environment. I've added a new JWS web service which is largely standalone, but it uses controls from elsewhere in the application.
    Locally, on my development box, it works perfectly - I can run it from Weblogic Workshop, and see the handy test form to run the web service, as well as seeing the WSDL by pointing my browser at http://localhost:7001/app/path/Service.jws?WSDL
    However, I've now built the EAR for the whole application, and deployed it to our test environment (clustered - a mirror (hopefully!) of the production environment).
    When I go to http://test-box:7002/app/path/Service.jws?WSDL I see a nasty-looking error page that looks like:
    WebService ERROR
    Error:
    null
    Stack Trace:
    null
    When I try the same URL without the ?WSDL on the end (so just http://test-box:7002/app/path/Service.jws), I see the nice Weblogic Web Service page, showing that it knows there's something there, but it has no content, just the 'Overview' tab, followed by:
    Public Information
    about Service.jws Web Service
    and that's it - locally I see the same thing, but with options for viewing the WSDL and testing the service.
    I'm confident that the URL is correct, because if I put rubbish in, I get a different error message.
    Reading around, I've found lots of resources for 'how to deploy a web service to a production environment' for Weblogic 7, but much less for 8.1. I've seen references to jwsCompile, for example, which I think is specific to 7, because I can't find any references to it in the 8.1 docs, but perhaps that's wrong?
    I'm pretty sure there's a configuration setting I'm missing, or a step in the deployment, but I'm stuck as to what it is!
    Any advice gratefully received.
    Edit: I should have mentioned that there are two other JWS's in the same app, both of which have the same symptoms as my new one (they've been there for a while, but are unused).

    My gut reaction is that there might be an issue with the frontend settings not set up correctly, see 9.2 docs in lieu of 8.1 docs:
    http://edocs.bea.com/wls/docs92/webserv/setenv.html#wp220521
    You should also open a support case as they could probably identify your issue quickly.

  • I add pictures to existing web page using iweb(3.0.1) and new pictures show in all browsers EXCEPT firefox. Previous patches seem only good for iweb 2.X

    web page created with iweb (3.0.1). worked great in firefox, then I added additional photos to an existing web page. All other browsers see these new pictures EXCEPT firefox. There seems to have been a previous issue with new pages, but fix appears only fro iweb2.x
    == This happened ==
    Every time Firefox opened
    == new photos added to existing page

    Do you see any error messages about getElementsByClassName in the Tools > Error Console ?
    That was the problem with content generated with an older version of iWeb.
    Content that has been generated with such an older version needs to be regenerated with that never version and uploaded to the web server.
    Never versions of iWeb should cause any problems.
    Can you post a link?
    See https://bugzilla.mozilla.org/show_bug.cgi?id=405903 - iWeb 2.x/iWeb 08 sites with photos or slideshows do not work in Gecko browsers (Bug 405903#c69)

  • How to access existing Web Service

    I want to access the web service (SOAP) from java classes.
    Can Any body help me by sending sample code providing that how to send my XML content to the existing web service and get the response from that.
    I want to further analyse that it is succedded or not from the response of web service (the response is also in XML).
    Thanks,
    Dipen.

    You are in the wrong forum - web services are not available with Sun webserver. Speaking of examples to check out, I would recommend you to install Sun appserver 8.1 or 8.2 and check examples that come with it, specifically in "samples/webservices" and "samples/xml" directories.

  • Web Start beginner - Web Start front end to existing web app?

    Hi all,
    I'm new to Web Start, though have been hearing about it for some time. Even after reading the documentation, I have some basic questions about it.
    Specifically, is it possible to invoke business methods via something like a Struts ActionServlet through a Web Start gui? That is, say my Web Start app and my existing web-based Struts app were on the same server, could I easily invoke the ActionServlet by passing in a URL with parameters? Thus giving me the ability to completely reuse my 'MC' of my Model-View-Controller app, and just replacing/adding another view ('V')?
    Has anyone ever done this? If so, are there good examples?
    Thanks in advance,
    Mike

    WebStart is a deployment mechanism for otherwise perfectly normal Java applications. WebStarted applications run on the client, not the server. WebStarted apps run in a protected environment (the Java sandbox), meaning they can't do potentially harmful things on the client machine such as reading and writing files or creating network connections to any server other than the one they were loaded from, unless you obtain special permissions from the user (the application needs to be signed for this to happen).
    So there is nothing that specifically prevents you from using a WebStarted application as a front-end for a Struts webapp. If it makes sense to use a client-side application for that purpose is a question only you can answer.

  • Content By Search web part causing issue for ajax post back implementation in Anonymous page

    We have recently migrated from SharePoint 2010 to 2013. In our site we have the registration control with ajax update panel which is working fine in all the pages other than home. After analysis, I found that this issue is happening only if the content
    by search web part exists (with loading behaviour as Sync. We tried with Async, ajax postback implementation working fine but search web part need some permission to execute the query in anonymous page).
    We got this link
    http://msdn.microsoft.com/en-us/library/ff650218.aspx which tell to include
    Microsoft.Practices.SPG.AJAXSupport.dll but we can't find this dll for VS 2012. Let us know where we can download the link.

    Hi,
    Here is a similar thread for you to take a look at:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/eb0df77b-6daf-4c63-9f0e-20bd0caae53c/referencing-microsoftpracticesspgajaxsupportdll?forum=sharepointdevelopmentprevious
    If you want to use Microsoft.Practices.SPG.AJAXSupport.dll. We can download the SharePointGuidance-August 2009.exe and install it, then we can find the project in the Source folder.
    Download:
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=13284
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Proto adding strange items in web browser

    Hi, Proto is adding strange items in web browser that are not in the editor. See images below
    Editor
    Web
    It seems to be adding content that is placed at the bottom of the page.
    See live link https://creative.adobe.com/file/ff07618c-b98a-4672-a2ce-8f7b4c7c0558
    Please advise on how I can fix this issue.
    Kind Regards
    Ryan

    Hi Ken, thanks for getting back to me.
    I am have tried to login to my creative cloud account, but found that my proto project will no longer sync with the cloud. Not sure what to do hear. I have tried to login in and out of my account, on my ipad which didn't help.
    Please advise.
    Kind Regards
    Ryan

  • Control the query of Content By Search web part or a Catalog-Item Reuse web part from JavaScript

    Is it possible/supported to intercept and change the query before it gets issued by a Content By Search or Catalog-Item Reuse webpart?
    I am writing a multilingual site utilizing cross-site publishing mechanism, and the out-of-box (OOB) web parts would perfectly work if not for the following requirement that I've got: I need to serve location-specific content to the end user. I have several
    versions of each content page for each geographical location, and I have tagged the pages accordingly with managed metadata keywords. I also can deduce the user's location from her browser's IP address and store it in a JavaScript variable. It is here
    where I am getting stuck: I am trying to change on the fly the queries the web parts issue in order to attach the information about the user's geographical location, unsuccessfully so far.
    I cannot rely on server-side code unless it is a cloud-hosted app code. I am about to give up and consider a custom solution alternative instead, which would be relying on Search REST API and custom client-side scripted widgets in place
    of the OOB search web parts. This seems like an expensive alternative as the entire site could have been built using the OOB web parts, if not for the location requirement.
    I would appreciate any suggestions.
    Thanks in advance,
    Ivan.

    hi
    I would check several directions:
    - in query transformation you may add keyword filter "Value of a field on the page". Documentation doesn't clearly says what "field" means here: is it only for site columns, or also may work for UI controls on the page. In second case it would solve your
    problem (it would be possible to add hidden field on the page and set value via javascript). But chances that it works like this are not high;
    - in the query settings of the Content by search web part there is setting "Loading behavior": Choose whether this query is issued on the server while the page is loading, which is better for your main content, or from the browser after the page appears.
    I.e. if you will choose 2nd option there will be a chance to intercept the query on the client side in theory. All of this requires experimenting of course;
    - by default Content by search web part sends query to /_vti_bin/client.svc/ProcessQuery with http post from client side (you may check it in fiddler). You may try to find the exact javascript function which performs the call and override it by adding additional
    conditions to the query (fortunately it is not complicated in javascript).
    Blog - http://sadomovalex.blogspot.com
    Dynamic CAML queries via C# - http://camlex.codeplex.com

  • How to create the Table of Content (TOC) in WEB

    Dear Sir
    Please help me
    How to create the Table of content (TOC) in Web Intelligence Report,
    Thanks
    Gnanasekarn.K
    Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

    Hi Gnanasekarn,
    You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
    With the help of open document you can open the specific portion of report.
    So you can achive your requirement using URL reporting or Open Document.
    Regards,
    Chaitanya Deshpande

  • How to display file contents on a web page

    On unix platform I have created a class that can read the contents of a file and display them to the standard output. But now i want to display these file contents on a web page through jsp. On JSP code I have imported this class and want to assign a record from a file and write it to the screen using html. I think the class needs to be modified in order to return the string record read from a file so that im able to access it from a jsp and assign it to a variable the I can display it on the screen. Can someone help me with these code?

    Actually, you mean Linksys.  BIG difference there.
    Linksys Business Series was accumulated into Cisco Small Business, since it was purpose built for small business, not residential/consumer grade.
    The new PVC2300 actually are Cisco branded on the case.
    The collateral you seek is protected by the business unit that supplies it, since it was placed on a portal that only Cisco registered partners can access.
    As I wrote, I already checked with the BU and they told me thats where it lives and not to hand it out.  I cannot override that. 
    I am not sure there are any secrets in there, but I dont make the rules, sorry.
    Do you want to be a Cisco Partner?   Sign up and gain access to everything you need to sell Cisco successfully to end customers?  If you tell me your geography (city/state/zip, I will have an ICAM call you and help recruit you.....
    Steve D
    Systems Engineer
    U.S. Partner Sales team
    RTP, N.C.

  • Is it possible to set up a form with a submit button where the data in the fields gets added to an existing excel file, just like 'collect response' but without connecting to the internet?

    I have a form that I want to use to collect peoples information with a submit button. I am trying to get the data that gets inserted to be added to an existing excel doc when the submit button gets hit, the form then resets and someone else can fill in the same form, hit submit and his data gets added to the existing data in the same excel doc. It is basically the same as the 'collecting response' option but without having to be online. The form is going to be used at a boat-show and I am going to get people to fill it out on an iPad. Does anybody know if this is possible?

    You could connect a bunch of 3700s to each computer and do this . 
    Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap. 
    I don't work for Cisco. I'm just here to help.

Maybe you are looking for