Adding Disclaimer text to standard web dynpro screens in ESS

Hi,
I need to add disclaimer text to the standard web dynpro screens of ESS. The disclaimer text is the same for all screens and there are around 20 different screens where I need to put the same disclaimer text on. Can anybody suggest me the best way to solve this problem.
Thanks,
Tom

HI TOM
u can specify this for each and every workset for ESS.
u used the Additional Inforamation text under each workset.
to change the text do the following
In SAP R3 ecc system go to SPRO->IMG->cross application components->Homepage framework->Areas->define areas->double click on define areas->double click on area key
(work set)
under area description tab
u can found following
Area Description heading --->Additional Information
Area Description (long text)--->
u can change both text accoriding to ur requirement and specify <b>The disclaimer text</b> .
this is done for all workset. one modificaton is finish.
relese the created request.
restart the j2ee server.
regards,
kaushal

Similar Messages

Dublicated Web dynpro screen in ESS

Hi Folks,
After adding iView to the page I am getting doubled screens in ESS, for example:
If I access Address service in Personnel Information, two dublicated web dynpro screens are getting called instead of one.
We have to have two iViews on the same layout
Could you recommend the solution?
Thank you,
David

Thanks Jithu for your response, but I have to have two iviews for a page. Is not it allowed? I need one for a pop up WD application and the second one for personal Information area page
Edited by: David Colch on Oct 20, 2009 10:26 AM

Adding fields/text on standard SAP transaction screens

Hi,
How do we add the fields on standard SAP transaction screens?
For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works?
Please let me know.
Thanks ,
Yogita

hi
every standard sap transaction have enhancement options you can add fields there
try this program to find the field-exits of the standard transaction.
[https://wiki.sdn.sap.com/wiki/display/Snippets/howtogettheuser-exitsofa+transaction]
regards
sarves

Web Dynpro Screen in ESS for mySAP ERP 2004

I have uploaded the Business Package for ESS for mySAP ERP 2004 and I am expecting the Webdynpro screen to be seen, but unfortunately I am able to see only the typical R/3 screens ...
our
R/3 ver ECC 5.0
EP 6.0
Any suggestions ?

If you are using ESS for ERP2004 BP, have you deployed the XSS WebDynpro Components (PCUI100, ESS, MSS .SDAs) to your J2EE Engine?
Cheers,
Steve

Calling a BSP application on a Web-Dynpro screen

Hi all,
We have a requirement as below:
In the SAP Standard Web-Dynpro screen we have a Tab-strip control, where there are 2 tabs.
We need to enhance the tab-strip control and add a new tab. On the same tab we need to call a BSP application.
It meas when we select the tab we should be able to see a specific BSP Application there.
How can this be made possible?
One way that I can think of is by creating the Service calls... However, I am not sure how can the service call can be created and used to call a BSP App to be displayed on the screen.
Waiting for your replies.
Regards,
Kunjal Patel

Hi Thomas,
Thanks for the reply. It was quite helpful in analyzing the available options for the development.
Now, with the further analysis from your inputs, following are the findings:
1. BSP is a Stateful BSP.
2. Yes, We are using this web-dynpro in the portal. How can we go about with the alternative way suggested by you about the iView? As i have very limited knowledge about the Portal hence a little more help from you will be helpful.
Is it like we can provide a button on the screen and then when a user clicks the button the result is a new window of the browser with the given portal link?
Please suggest.
Regards,
Kunjal Patel

Adding an ABAP Web Dynpro application to a Java Web Dynpro screen

Hey fellow SAPers
This is an interesting one .........
We have developed a bespoke ABAP Web Dynpro screen that we want to include into a tabstrip in a Java Web Wynpro application. We have managed to do this by inserting an iFrame into the tabstrip, and then passing the UWL of the ABAP Web Dynpro app. This works. However, life is never that easy and of course whenever the screen is refreshed, the ABAP WD app is called again and so any changes to the data on the ABAP screen are lost as the data in the ABAP app is re-selected and the data returns to it's original state.
Does anyone know:
- of another way to incorporate an ABAP WD screen into a Java WD screen (as a tabstrip)
- how to de-activate a Java view so that the view containing the ABAP WD app is refreshed (i.e. the window is refreshed), the view is not refreshed and the ABAP app is not re-called .....
- any other ideas ....
of course, we could re-develop the same screen in Javam, but that would be too easy
Looking forward to your responses
Jon

>
> Hi Jon,
>
> First of all Iframe is not officially supported until 7.01 version.
I believe it is deprecated in 7.01 and re-supported in 7.02
[7.01 IFrame Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
[7.02 IFrame help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
>
> Would you not use Portal for that and incorporate two iViews in a Page?
I'm guessing you want to show this within the WDJ app not above, below to the left, right...
This is a very very difficult thing to do - I'm guessing that you are not actively passing data into the URL of the WDJ IFrame, but just have "decorated" the WDJ app with the a statically linked IFrame. In this case the only thing you have to tie the two together is the user id that you are using - and potentially the time the app was launched. You could in theory use a shared memory area (watch out for multi app server environments) to store the state of the app in case it got refreshed... but this is not a simple thing to do...
Consider if it is absolutely necessary to enhance the WDJ in place - hopefully you can just replace it with a WDA when you install EhP5
Good luck,
Chris

How can I copy a standard Web Dynpro Abap?

I have to make changes to some texts in a standard web dynpro: FITV_FPM_START. One of the texts is "Description" ("Descripción" in Spanish), which seems to be protected in the OTR. So the only option I see is to copy the whole Web Dynpro, locate the component in which the text appears, and replace it for the new one. If there is a simplest way I'd be glad to know...
I've copied the Web Dynpro and then all the Web Dynpro Applications, with their parameters and so on.
When I verify one of them most of the things are not appearing on the screen. I can only see the buttons. What have I missed to copy?
Thank you in advance.

Hi,
If you just want to change some OTR text, I do not think that you need to copy the whole application. Just get the alias for this OTR text. (I just tested changing an OTR text from SAP...it did not ask me for any keys...so I hope it will be alright in your case as well....)
To get Alias, go to your webdynpro application, than go to menu "Goto", select "online text repository browser", than double click on the OTR text you want to change the text for. This will open up a new window...the first line is Alias Name.
take this Alias Name....go to transaction SOTR_EDIT
on the screen which shows up, you have following
Language: Pick English here
Text: *
Alias: here put the alias name you found
Concept: leave it blank
click on display.
Now on this screen go to the "EDIT" menu -top of the screen-where you also see system and help menu. Follow the following path:
Edit->Context->Change
As soon as you will click on Change....you will see a pop up coming up with following fields:
Country:
Industry:
close this pop up box without filling out anything there....just click on red x and close this pop up box.
After you close the pop up box you will find that the "Language" field is open for editing....
In this field choose the language you want your Alias to be translated into or leave it as English if you want English..
In the text field...type in your new text....
Save your work...
That is all...no need to do anything else.....
you can check if your Alias is being translated...
go back to transaction SOTR_EDIT...and than choose language and put in the Alias Name
you should see your changed text...
I guess you are copying a FPM application...if that is the case, than you might be missing the configuration for that application...that is why you see things missing there.... try to search in forum for FPM guide....
I hope this helps...
Thanks...
AS

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

UWL - Records not getting into LeaveRequestApproval web dynpro screen

Hi,
We are on EP7 sp9 and ECC 6.0. We are working with UWL. In UWL, we downloaded the standard XML file and done changes for removing the other tabs except the 'Tasks' tab and also placed the refresh button on main screen. It looks fine. Now, the problem is the web dynpro screen is not pulling data from backend. Previously, when we click on 'LeaveRequestApproval' work item, we use to get ITS screen. at backend we did changes in SWFVISU transaction to get web dynpro popup screen when user clicks on 'LeaveRequestApproval' work item. We could able to get the popup web dynpro screen, but it is not pulling any records from backend.
Now, let us know where we are doing mistake? do we need any more configuration at backend? If so, let us know the work around for it.
Thanks in advance.
Kind regards,
Raj.

Hi,
But are you able to see the labels, buttons etc ? Or is it that the entire page itself is not visible ?
Please check the log file and see what is the error you get there ? Or probably check on the backend side if there is a dump.
You can also check with the debugger on the backend side...see what exactly happens on the backend when the page is getting loaded.
Cheers,
Sunil
PS: Reward points for helpful answers.

Use of Variants in a Web Dynpro Screen?

Hi,
Is there an easy way to simulate the use of variants in a Web Dynpro screen, like in R/3 for a transaction?

Can you give me some example for storing text files on the Java server?
An example to manage parameters for each user, for example :
\[ZAPPLICATION\]
EQUIPMENT=300056
TYPE=ZE
PRIORITY=1
DISPLAY=True

Customizing the standard web dynpro ABAP travel application

Dear All,
Scenario :
We want to modify the existing travel application------> Create Travel Request should open an interactive adobe form
which will capture all the data and update the backend table , instead of the web dynpro screen and similarly for plan trip .
I wanted to know what is the best practice or approach for this and how to go about it.
Regards,
Geet

Hi All,
Need your valuable inputs on this.Also when I was trying to replace the standard web dynpro abap screen for create travel request...coudnt find the view.I mean on the overview of Trips and Expenses there is a button for Create Request but I am unable to find the view where this button is placed....I think its getting created dynamically.
My concern is how to call my interactive form when the button for create request is clicked...dont know where to place it.
Regards,
Geet Bijlani

How to develop a rich text editor using Web-Dynpro?

Hello Everyone,
I am new hire,
today I got a task from leader to develop a rich text editor using Web-Dynpro,
Because I just finished the BC400 and NET310 training and lack of expericen in ABAP,
Can anyone tell me the main idea to accomplish the task?
Thank you very much.
Best Regards,
Derek

Have you looked at the standard UI Element
[FormattedTextEdit|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/2772f505605447e10000000a422035/frameset.htm] it's not perfect, but it does allow some simple formatting.
Anything beyond this - you're going to need to use an Island.
[Thomas Jung's Demo of using an Island to provide a rich text editor|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0c91fc0-932d-2c10-4ca7-f5774950c8e3]
Cheers,
Chris

Font size of text view in Web Dynpro ABAP

Hi Experts,
How to increase the font size of a text view in Web Dynpro layout. I have tried the 'Design' property of the text view and made it 'Group Title', But i want even bigger font size.
Pls suggest.
Thanks,

>
Naresh Kumar Malik wrote:
> Hi
>
>
>
>
> You can use <h1> HTML tag. Here
> concatenate '<h1>' item_eform_reqno '</h1>' into head.
> wd_context->set_attribute( exporting name = 'EFORM_HEAD' value = head ).
>
>
> Here attribute EFORM_HEAD is bounded to the text view element.
>
> Regards
> Naresh
This should NOT work! The UI elements should safe encode all input values - thereby eliminating the value of any HTML tags. If you system isn't doing this already then it is a bug and if you rely on such a thing it will stop working at some point in the future.
You are basically restricted to different values available via the design parameter. The overall font sizes come from the underlying themes and the client applications (browser or NetWeaver Business Client) that host the Web Dynpro Application. Therefore no direct specification of the font size is possible in order to stay within the controls of theme. If you don't like any of the designs available, you might consider altering the Portal Theme you are using - but that is a rather drastic approach.

Trigerring BPM from Web Dynpro screen not working

Hi Guys,
I am trying to trigger a BPM process from a Web Dynpro screen so I created a BPM process and created a WSDL and consuming the WSDL in the Web Dynpro app but getting an exception "Exception on creation of service metadata for web service mass config parameters service reference ID '28af57ab-9212-4ffd-90c6-0779c78a8da3' and application name 'demo.sap.com/testwd'. Check mass configuration has been done properly."
Please assist with what I am missing.
Thanks,
-Ash

I ran into the same error when attempting to consume a Process as a web service from my Web Dynpro component. I found that it is actually succeeding in kicking off my process, but it looks like it fails from my calling component. It seems to be related to calling a service meant to be asynchronous as a synchronous service. In my case, it throws a SOAP fault "com.sap.engine.services.webservices.jaxrpc.exceptions.SOAPFaultException: Process start has been triggered" when I run it from the WS Navigator manually. It turns out that the same error is getting wrapped by the exception you were experiencing. Try using the getCause method to see if the same is true for you. This environment is still new to me so I don't have good solution on how to make it not throw that error in the first place.
[addendum] I ran across [this|Start BPM Process Trigger - Read timed out] thread that explains exactly what I had guessed. You can remove the response part of your WSDL and it will get called successfully in an asynchronous manor. Note that you must manually remove some of the entries in the WSDL since the visual editor with the 7.1 environment doesn't clean up after itself as well as it should.
Edited by: Joseph Robertson on Jan 12, 2011 11:04 PM

How to create PDF from a web dynpro screen

Hi all,
I am in the process of creating my first web dynpro application for parking a document, the new requirement is when the user parks the document, a PDF of the web dynpro screen should also be generated. Can you please tell me how can I achieve that.
Thanks,
Rajat

A PDF generated from the screen? There is no SAP delivered functionality to do this. I might suggest that you just use the browser print and print to a PDF generated virtual printer. Otherwise you would have to design an Adobe Form (and run it within WDA using the InteractiveForm) that matched the interface of the WDA screen. There is no automatic generation. You would have to design and maintain each independently.

Adding Disclaimer text to standard web dynpro screens in ESS

Similar Messages

Maybe you are looking for