Adding existing schedular job to time window.

Hello All,
We are running 11.1.0.7.0 Database and we have one custom job , which runs daily around 2 PM . Now , we need to put this existing JOB into the maintained window , so that , if it exceeded the window , oracle will stopped it automatically. here , we need to put this GATHER_STALE_STATS_JOB into maintenance window, So , every time , it breached the time window, oracle will sent this job to stop shop.
select owner , JOB_NAME , LAST_START_DATE , SCHEDULE_TYPE , state from DBA_SCHEDULER_JOBS ;SQL> SQL> SQL> SQL> SQL>
OWNER           JOB_NAME                       LAST_START_DATE                                    SCHEDULE_TYP STATE
SYSTEM          GATHER_STALE_STATS_JOB         17-JAN-13 03.00.09.070986 AM +02:00                CALENDAR     DISABLED

Check this thread.
Re: two simple questions
In job attributes, STOP_ON_WINDOW_CLOSE needs to be set to TRUE

Similar Messages

  • Non standard time windows

    Hi All,
    I am wondering about the best way to implement some non standard TW like biweekly frequency.
    In this case (biweekly), I think I can create a TW with 2 different TW intervals, one for the first 15 days and another for the remaining 15 days.
    What is your point of view ?
    Regards,
    Yi Jiang

    Hi Yi,
    In principle submit frames define the frequency of the job and time windows define the allowed start times.
    However if you have a somewhat irregular time window, then of course both objects (submit frame & time window) come into play.
    For the simple scenario, an exact biweekly schedule, I'd create a submit frame of "every 14 days" and then plan jobs using this submit frame and optionally a time window (for instance to fix the starttime of the process, or to use the "fit in time window" property).
    If the process is not entirely biweekly, but almost, f.i. 1st of the month & 15th of the month, then yes, a time window with two elements (one for each of the options) is the easiest. The submit frame should then be shorter than or equal to the shortest gap in the time window, in this example you could take two weeks (that would work out just right even in February with 28 days).
    Regards,
    Anton.

  • How to schedule a job to run only in a  time window

    Hi,
    I need to schedule a job to run every day but sundays from 7am to 6pm. I managed to get it to start at seven like this
    FREQ=WEEKLY;BYDAY=TUE,WED,THU,FRI,SAT;BYHOUR=7;BYMINUTE=0;BYSECOND=0
    how can I set the job to stop at 6pm?
    thanks in advance

    Yes, as far as I could tell you create a resource plan to allocate processor resources, assign a resource plan to the window, then assign the job to a job class which is in turn assigned a resource group within that resource plan. Then when the window is active, it sets the active resource plan for the database so the job will run using this until the window deacivates the resource plan. Unfortunately because the resource plan is database wide, it means you could only really have one time window active at any one time within which to run jobs, I don't think two windows could overlap.
    Easier to work within jobs, but its a shame the job doesn't end itself, rather than having to have the second job, although the second job does enable you to engage in some communication between jobs to cleanly end it, rather than stop it dead. I have a job that runs until a set time each day, but it just works on a loop that sleeps for a few minutes each time, checking for file arrival and processing it, and sending a notification e-mail if it reaches its end time without the file arriving.

  • Not executed jobs with satisfied time windows ?

    Hello all,
    I have encountered a weird situation with scripts and jobchains that are using a time window. These scripts and jobchains are also using in their enclosing jobchain a pre condition that test whether their time window is satisfied or not (its status is set to 'skipped' if not).
    For the execution of last friday, these scripts and jobchains went to the status 'Skipped' although the related time windows were satisfied:
    TW specified to run on Friday (job planned for friday and not the following day)
    TW specified to run on the last workday of the month (job planned for friday and not the following day)
    So we have just made some tests with ad hoc script, jobchains and time windows to run on:
    Monday
    the first workday of the month
    Both of the tests worked.
    For information, these jobs have always run successfully (when needed) on others environments.
    Have you any idea of what is going on with these time windows?! what could be the cause of that behavior?
    Thanks anyway for your help.
    Regards,
    Yi Jiang

    Hi Yi,
    That's no problem, the cause is clear so this thread is useful because other people may also run into this.
    Maybe a tip that could fix your issue: if you do not use systimestamp to verify if the time window is open, but use the (planned) starttime of the chain, you can avoid this issue.
    By looking at if the starttime of the chain was on a day in a given timewindow, it no longer matters if the chain runs over midnight.
    You may need to change other things too, because in this second case, you cannot use a real time window on the call because that would still be taken into account and if you run over midnight, the window may not be open.
    So in this second scenario, you need:
    - a separate parameter P_TIME_WINDOW (and P_TIME_WINDOW_PARTITION) on the call to indicate which time window the precondition should follow; the call itself will no longer have an actual time window
    - a changed precondition, using the starttime of the chain and the parameter P_TIME_WINDOW (and P_TIME_WINDOW_PARTITION) on the call to determine if the call should run or not
    Let me know if you need more information.
    Regards,
    Anton Goselink.

  • Submit Multiple Job Definitions/Job Chains with same Time window/Submit frame in mass

    Hi,
    We have a requirement to submit multiple Job Definition/Job Chains which are part of common Time Window/Submit frame/Queue....
    Ex. We have over 50+ different jobs/job chains which will runs Monday to Friday for every 2 hours on same Queue "XXX_Queue".  Instead of submitting each job/job chain manually, we would like to know if we could use any script that can achieve our requirement? since we have couple of other jobs which fall under same scenarios...
    We are on M33.104 version. Please let me know if any one has any scripts or alternate way of submitting multiple jobs/job chains in mass.
    Thanks in advance!
    Nidhi.

    Hi Nidhish,
    Here is some code to set some stuff on a job:
    //Get the partition, for global this is not necessary as global is default
    Partition part = jcsSession.getPartitionByName("GLOBAL");
    //Get the job definition
    JobDefinition jobdef=jcsSession.getJobDefinitionByName(part, "System_Info");
    //Get the submit frame
    SubmitFrame sf = jcsSession.getSubmitFrameByName(part, "SF_Every_Year");
    //Get the time window
    TimeWindow tw = jcsSession.getTimeWindowByName(part, "System_Week_WorkingHours");
    //Set the start time
    DateTimeZone dtz = new DateTimeZone(2015, 10, 18, 15, 0, 0, 0);
    //Get the Queue
    Queue SystemQ=jcsSession.getQueueByName(part, "System");
    //Create the Job
    Job infoJob=jobdef.prepare();
    //Attach queue to job
    infoJob.setQueue(SystemQ);
    //Attach submit frame, time window, start time
    infoJob.setSubmitFrame(sf);
    infoJob.setTimeWindow(tw);
    infoJob.setRequestedStartTime(dtz);
    //Print out the jobid of the job
    jcsOut.println(infoJob.getJobId());
    //Submit the job
    jcsSession.persist();
    Regards,
    HP

  • 10.1.3 - Problems adding existing files and projects

    I am having some very basic issues with the latest JDeveloper 10g (10.1.3) - Preview Release, all related to adding existing files and projects to JDeveloper.
    http://jdeveloper.us.oracle.com/
    http://jdeveloper.us.oracle.com/jdev_index.uix?bajaPage=menu=0%24menu_option=0%24tab=3
    http://jdeveloper.us.oracle.com/download/software/10g/1013Preview/jdevj2ee1013.zip
    Oracle JDeveloper 10g (10.1.3) - Preview Release, Nov-2004
    Version 10.1.3.0.2.223
    Build JTINTEG_MAIN_NT_041202.0854.223
    Setup JDeveloper
    ===============
    1) Unzip jdevj2ee1013.zip to c:\jdev101302_233
    2) Run c:\jdev101302_233\jdev\bin\jdev.exe
    3) Would you like to migrate from a previous version of JDeveloper? No
    Attempt to add a java file to a new Project
    ==========================================
    1) Right click on Applications and select New Application Workspace...
    2) Create Application
    Application Name: VTF_C
    3) Create Project
    Project Name: VTFclean
    4) Attempt to add a source file to the project
    a) File Open...
    Select a file.
    PROBLEM 1: File is opened, but is not automatically added to project and I am also not prompted with the 'Add Project Source Path' dialog.
    b) Attempt to drag/drop file onto VTFclean project
    Get 'Add Project Source Path' Dialog
    The project source path must be updated in order to add the selected file or files.
    Do you want to update the project source path? Yes
    PROBLEM 2: JDeveloper hangs
    Attempt to import a previous JDeveloper project
    ==============================================
    1) File Open...
    Select VTFclean.jpr and press 'Open' button.
    2) Create Application
    Application Name: VTF
    Press 'OK' button
    3) Open Warning
    You are about to migrate project C:\oracle\dss\vtf\build\VTFclean.jar to JDeveloper 10g Developer Preview release 10.1.3.0.2 file format.
    Once the project is migrated you will not be able to reopen it using an older version of JDeveloper. We will back up your project file, you may want to back up the project contents before proceeding.
    Do you want to migrate these files? Yes
    4) Migrating Progress Dialog displays
    Migrating files to JDeveloper 10g Developer Preview version 10.1.3.0.2 format....
    Problem 3: JDeveloper hangs whether initial project was based on 9.0.5.x or 10.1.2.x
    Questions:
    ==========
    1) Am I missing something obvious or are these simply bugs?
    2) Is there a particular reason why there is no reference to JDeveloper 10.1.2 on the http://jdeveloper.us.oracle.com website?
    3) Why were the 'Add to Applications...' and 'Add to Project...' buttons removed from the 'Applications - Navigator'?
    I found them very helpful and used them to add items to existing Applications and Projects.
    I have duplicated these problems on two different Windows XP systems. Neither JDeveloper 10.1.2 or 9.0.5 builds have exhibited these problems.

    Hi Shay,
    This dynamic project source feature is going to kill us! We have more than 15,000 files in our projects. Currently, part of them are managed by JDeveloper. Developers have option to load only the files they are working on. If all files in the project source will be loaded automatically, that will definitely be a nightmare to us. The JDeveloper will be frozen from time to time when it start to looking for new files...
    Think about why people pick Oracle instead of SQL Server - Oracle is good in handling large data. We, JDeveloper users, sincerely hope JDeveloper team can design/test the JDeveloper on large scaled project before formally release it.
    Thanks for your hard work though.
    Charles

  • Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

    Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

    You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
    Mylenium

  • How can I/Is it possible to silently print a PDF with specific print settings and obtaining the resulting job id (in windows at least)?

    Greetings,
    I have a specific application for Windows I'm developing where I need to silently print a PDF to a real printer.  The trick is I need to set specific printing preferences ... such as color/monochrome, # of copies, page size / source tray, etc.   The printer is always set to spool documents, and it is key that I know the job id (even if its already done printing) of the resulting print job.
    With windows APIs mixed in, I would imagine something like ...
    OpenPrinter(printername)
    StartDocPrinter(...)
    -----> some SDK call to print the document based on the handles I pass it...or perhaps one page at a time after I call StartPagePrinter()
    EndDocPrinter(...)
    ClosePrinter()
    I've been searching for something for days that would give me this sort of control, but I've been finding the documentation very difficult to find on silently printing a PDF through any means other than a command line which doesn't appear to give me the information or control I need.
    Is this possible with the Adobe SDK? 
    I've seen other posts accomplish this by changing the printing defaults for the printer, and then sending the job silently with a commandline.  This has two problems for me: 1) I still don't know the Job ID of the print job, and 2) I can't rely on the idea that other unrelated print jobs will not be sent while I'm processing the PDF ... making it difficult to use defaults as a means of controlling the settings without causing a lot of side effects.
    Even just a point in the right direction would be a huge help for how I could accomplish this.  
    Thanks a lot,
    Wayne

    You cannot uninstall Kit Kat from your phone. BTW what kind of phone do you have??

  • Database job execution time changing

    Hello,
    I created a job to execute every 15 minutes. What I have noticed is it is not getting executed every 15 minutes, instead period is increasing over 1 or 2 minutes.
    Here is my code for job, is it because of seconds it is making the difference?
    DECLARE
    X NUMBER;
    BEGIN
    SYS.DBMS_JOB.SUBMIT
    ( job => X
    ,what => 'myproc'
    ,next_date => to_date('20/08/2006 07:34:10','dd/mm/yyyy hh24:mi:ss')
    ,interval => 'sysdate+30/2750'
    ,no_parse => TRUE
    END;
    /

    You need to use date functions that evaluate to a FIXED time in the future (see AskTom for further explanation: http://asktom.oracle.com/pls/ask/f?p=4950:8:9447876042389067866::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:13317229864022)
    The preferred method would be to create custom-built function that returns the required interval. The function can use hard-coded logic (like the example below) or it can read from simple "repository" (set of tables with job schedules, maintenance windows etc.).
    Example:
    1) Create next_date function
    CREATE OR REPLACE FUNCTION next_date
    RETURN DATE IS
    v_date_portion_1 VARCHAR2(16);
    v_date_portion_2 PLS_INTEGER;
    v_date_portion_3 PLS_INTEGER;
    v_next_date DATE;
    BEGIN
    v_date_portion_1 := TO_CHAR(sysdate, 'dd.mm.yyyy');
    v_date_portion_2 := TO_CHAR(sysdate, 'hh24');
    v_date_portion_3 := TO_NUMBER(TO_CHAR(sysdate, 'mi'));
    v_next_date:= TO_DATE(v_date_portion_1||' '||
    (CASE
    WHEN v_date_portion_3 < 15 THEN TO_CHAR(v_date_portion_2)||':'||'15'
    WHEN v_date_portion_3 >= 15 AND
    v_date_portion_3 < 30 THEN TO_CHAR(v_date_portion_2)||':'||'30'
    WHEN v_date_portion_3 >= 30 AND
    v_date_portion_3 < 45 THEN TO_CHAR(v_date_portion_2)||':'||'45'
    ELSE TO_CHAR(v_date_portion_2 + 1)||':'||'00'
    END), 'dd.mm.yyyy hh24:mi');
    RETURN v_next_date;
    END next_date;
    2) Change interval
    BEGIN
    DBMS_JOB.CHANGE(<your_job>,
    null,
         null,
         interval=>'next_date');
    END;

  • PS CS6 sends same job multiple times

    Using PS CS6 on WIndows 7 64.  All drivers updated.  When I set 5 copies in the print menu, with either PSDs, TIFFs, or JPGs, PS sends the same job five times rather than telling the printer to just make 5 copies.
    This happens when using either the color laser or Epson R3000.  This does NOT happen when using non-CS6 products.  On a 25 print run, this takes an abnormally long time.
    What I HAVE found is that PS is NOT passing the information to the printer.  In other words, even though I set PS to multiple copies, when I click printer options the number of copies has not been passed to the driver.
    Is there a fix?

    I'm having the same issue with my Toshiba 451c. PS CS5.5 both 64 and 32 bit works fine except for the known bug, but it prints ONE JOB and the number of COPIES you set.
    PS CS6 64bit (I did not install 32 bit, maybe I will try this now) is printing SEPERATE JOBS.
    The number of copies in the printer dialog box just resets to 1, all other setting will stay if changed.
    This is very anoying and no one seems to have a fix for this.There are also not many people talking about this issue online that I can find.
    My CS 6 was installed on a fresh windows 8 install.
    Is everyone having this issue or is it only on certain macgines.

  • Adding existing folders in mailbox

    Adding existing folders in mailbox

    You can't add folders in the Mail app unless you have an IMAP email account. You cannot add folders for local storage like you can in mail clients on a computer.
    If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
    If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

  • Implementation of complex Time window

    Hi all,
    I want to allow script to run a particular day. Let's have this example to illustrate:
         - jobs are scheduled in the night of the last workday of the month to the day after
         - script S has to be executed the day after last workday of the month (past midnight)
    How is it possible to implement that with TimeWindows?
    First, I thought that it'd possible to use multiple time intervals to get a combination that satisfied my need:
         - Time interval for the last workday from 8pm till midnight
         - first workday from midnight to 7am
         - first saturday from midnight to 7am (in case, the last workday is a friday)
    But using this method allow the script to run at unexcepted times.
    Then, I saw the period functions "Last workday in month [-x] [to last workday in month [-y]]" that sounds good but :
         - period is only during a particular month, cannot be extended to the first worday of the next month
         - there is only functions for last workday but nothing for first ones
    I think it would be possible to implement myself the period functions needed, but Oracle functions cannot be exported with our current import/export tool.
    Finally I have no idea how to implement that. Have you any clue?
    Thanks in advance.
    Regards,
    Yi Jiang

    Hi Anton,
    Thanks for your answer.
    It's a chain. But it is not necessairly scheduled before midnight.
    And yes there are functions for first/second workday in the month but it's only on the current month and not thoughout following months.
    Another yes. the day after the last workday is not necessarily the first workday of the next month, but when it is the case, I cannot see any solution with the time windows implementation.
    So I finally got the following solution: using the precondition that check the TW to compare it with:
    - the current timestamp (starttime for ex) if it's before midnight
    - the current timestamp (starttime for ex) - 12 hours if it's midnight past
    Then, TW are defined as the scripts were launched before midnight in all case.
    Regards
    Yi Jiang

  • Create schedulers for all existing user jobs

    Hi Forum,
    In my database (Oracle Database 10g Enterprise Edition Release 10.2.0.4.0), I have 7 DB schemas.
    There are total existing 50 jobs (usaer_jobs).
    I want to shift them all to scheduler (user_scheduler_jobs).
    My plan is,
    1.     Create schedulers for all existing user jobs.
    2.     Enable all schedulers.
    3.     Disable all jobs.
    Is there any way / method for such shifting? I am ready to this exercise schema wise at a time.
    How to create scripts for creating schedulers from existing jobs?
    Thank you & regards..

    PROCEDURE CREATE_JOB
    Argument Name               Type               In/Out Default?
    JOB_NAME               VARCHAR2          IN
    SCHEDULE_NAME               VARCHAR2          IN
    JOB_TYPE               VARCHAR2          IN
    JOB_ACTION               VARCHAR2          IN
    NUMBER_OF_ARGUMENTS          BINARY_INTEGER          IN     DEFAULT
    JOB_CLASS               VARCHAR2          IN     DEFAULT
    ENABLED               BOOLEAN           IN     DEFAULT
    AUTO_DROP               BOOLEAN           IN     DEFAULT
    COMMENTS               VARCHAR2          IN     DEFAULT
    CREDENTIAL_NAME          VARCHAR2          IN     DEFAULT
    DESTINATION_NAME          VARCHAR2          IN     DEFAULTdoes not appear to be an available option.

  • How to insert, as an input variable within formula, the total time window on scope?

    How to insert, as an input variable within formula, the total time window on scope (i.e. 20ms/div x 10 div = 200ms)?
    BELOW IS AN EXAMPLE OF ISSUE:
    FORMULA FOR ACTION INTEGRAL:
    STATISTICS:
    Input variable: DPO4034(CH1);
    Check Box: number of samples.
    FORMULA
    Input variable 0: DPO4034(CH1); alias: x0
    Input variable 1: "Total Time Window on Scope???"; alias: x1
    Input variable 2: Number of Samples (CH1); alias: x2
    Under Operation Setup: Formula
    Y= (x0^2)*(x1/x2)
    Output: Processed Data 1 (CH1)
    THEN USING STATISTICS:
    Input signal: Processed Data 1 (CH1)
    Check Box: SUM
    Output: CH1 Action Integral [A^2s]
    Solved!
    Go to Solution.

    Hi again Catherine,
    I have now added another TekScope (TDS3032B) along with the DPO4034 and run the same work-around on the TDS3032B using CH1 as the "real" signal channel and CH2 as the "burst width" channel. However, the value returned for CH2 is nominally 99E+36 (min 99E+36, max 99E+36) with very few retrievals of correct burst width (~200ms). Seems the SignalExpress program is unable to consistently retrieve from TDS3032B the actual burst width (scope's time scale/window) and defaults to 99E+36 value. Any ideas on what is occurring and how to make it work? Attached are some screen captures to help guide discussion.
    Regards,
    Michael
    Attachments:
    TDS3032B - incorrect burst width.png ‏301 KB
    TDS3032B - correct burst width.png ‏287 KB
    DPO4034 - always correct burst width.png ‏302 KB

  • Can I use the the measured time between the first count and the last count in a fixed time window in order to increase the accuracy of a quadrature velocity measurement?

    I am measuring velocity using a linear encoder. Resolution is 40microns, sample frequency is 1MHz and the real velocity is oscillatory in nature with an amplitude of 200 to 400 mm/s with a freq of about 1Hz. We use a 5ms fixed time window to measure velocity. The quanization error for this is 8mm/s. Can I get rid of the quatization error by somehow measuring the exact time from the first pulse to the last pulse in the measurement window?

    There is probably a way to do it, but it it may be easier to use an X-series board for the job.   They support a new counter capability for count reset on a digital edge without needing to be configured in encoder position mode.  I am not sure exactly how that feature's been implemented however, so maybe it won't make things easier after all.
    The plan based on the hoped-for behavior: 
    1. Configure an X-series counter for pulse generation based on "ticks" of your clock channel.
    2. Set both initial delay and low time to the critical # of ticks.
    3. Configure for count reset on a digital edge (if possible in pulse generation mode)
    4. Configure the count reset value to be the critical # (or possibly 1 less, if possible in pulse generation mode)
    5. If you want the output to remain high indefinitely, configure the counter task to use its own output as a
    pause trigger, and pause while high.
    The way pulse generation works is to preload a # of "low time" ticks into the count register.  Then every source edge will decrement the count.  When the count reaches terminal count (0), the counter's output is toggled (or can be configured to pulse).  The register is then loaded with the # of "high time" ticks and the process continues.
    You would be perpetually interrupting the count-down process as long as you got your triggers in time.  The count would keep getting reset to the # of low counts, keep decrementing toward 0 without reaching it, and so on.  If ever you did reach 0, the output state would toggle high, then the high state would prevent subsequent clock signals from decrementing the count.
    You can conceivably do a similar thing with a 6601, but I'm pretty sure you'd need 2 counters working together to get it working.
    -Kevin P

Maybe you are looking for