Adding field in dynpro with MWMMOB01 enhancement

Hi everybody!!!
My requeriment is adding a new verification batch field to LM07 transaction.
Does anybody know how can i do it with this enhancement MWMMOB01 or maybe somebody knows another diferent way to do it?
I have checeked another post but i dont really understend how to do it.
Thanks and regards.

Hello Bluesh
Normally the extra field should be from a table that has a foreign-key relationship to your main table. Thus, add this additional table to the list of tables for the view. If it does not have a suitable relationship you cannot add it to the list of tables.
Afterwards add the required field to the list of view fields and set its property to 'R' = read-only.
If correctly defined there is no need at all to modify the screen(s) or the coding of the PBO/PAI modules.
Example: your z-table contains field KUNNR (value table KNA1) and you want to add the NAME1 field to your maintenance view
add table KNA1 to the list of tables
add field NAME1 to view fields
set its property to 'R'
regenerate function modules and screens
Regards
Uwe

Similar Messages

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

Problems with Adding Fields/Columns to Crosstab in XI

Post Author: ph03nix
CA Forum: General
I am having problems with formatting a crosstab report in CRXI and am hoping that someone has a solution.
The crosstab report is a subreport, and requires the following columns, grouped by Firm (also not working optimally, but at least working):
Evaluator, Factor1Rate,[Factor2Rate, .., FactorNRate], Summary, UpdateDate, UpdatedBy
Where:
Evaluator is the person that did the evaluation that resulted in each rating (formula field)
Factor1Rate, etc, may have one, many, or all of these be applicable - there can be up to 15 of these. Each FactorRate column is to display the "rating" given by the Evaluator in the corresponding row/column (this much works). The table heading is a formula, but the corresponding rate is not.
Summary should display "Complete" if and only if there is a Comment field (not displayed) filled out for each FactorNRate that has a value of 0, 1 or 5 - otherwise it is blank
DateEntered is one of 2 fields ("last_updated" , or "creation_date" if last_updated is null - a formula field)
UpdatedBy is the last name of the person who last touched the ratings (formula field)
I have gotten the FactorRates to display in the headers, and gotten the corresponding rates to display underneath them, but I cannot seem to add any other columns to the report - they are either added as headers with the factor_rating columns repeated as subgroups (with incorrect data), or are added under existing headers with duplicates of the ratings. I just want to add one column for each field as if it were a normal (non-crosstab) table.
TIA!

the 3 last files
Attachments:
Z1&Z2.vi ‏19 KB
tau_inn (SubVI).vi ‏16 KB
tau_ut (SubVI).vi ‏10 KB

Using SELECT_OPTIONS in Web Dynpro with currency fields

I have an application where I use SELECT_OPTIONS to gather search parameter values for a query which has amount and currency fields. In my WDDOINIT, I am calling add_selection_field to add the fields that I wish to use to search. One of the fields is a currency key and another is the amount. The query returns the found data in an ALV and each record has its amount formatted correctly based on the currency key field in each record. This all works as it should.
However, the search parameter for the amount field is always formatted based on its data type and not on the other search parameter with the currency key. The currency key field does not allow multiples so it is either present or not (using the default would be fine if the currency key is not specified). If it is specified, I would like it to format the amount.low and amount.high input fields correctly.
For example, if I enter 'USD' in the currency key search field and '10' and '20' in the amount from/to fields, respectively, when I press the search button or hit enter, both the amount to/from fields' display changes to '10,00000' and '20,00000', respectively which is the data type definition of CURR19,5.
I found no documentation on how to handle formatting of currency or quantities in the search fields when using SELECT_OPTIONS. Has anyone solved this problem? I looked at all the parameters to the add_selection_field method and cold not find a way to associate the currency key to the amount. Any help would be greatly appreciated.

Hi Mark,
I don't think, it is possible to get the currency key reference for the amount fields in selection screen by using IF_WD_SELECT_OPTIONS.
I would suggest you the below work around option
If you do not have the requirement of passing multiple values in either currency key field or amount field, you can go for normal input fields to design your input screen.
Create a structure with 3 fields , CURR, AMT_LOW, AMT_HIGH
Use currency reference field in structure with self structure name and CURR field, so that amount fields refer to the same structure's currency key
Create a node by using this structure and design the input fields from this context node
Now, the amount fields have the reference of currency key from the structure and it should work fine
Hope this helps you.
Regards,
Rama

UDM_SUPERVISOR: Adding fields and data at customer item level

Hi
I am having the same issue with newbie82_c; I need to populate the added fields in transaction UDM_SUPERVISOR.
I know that the previous thread was tagged as answered already but the solution to the issue was not indicated in the thread.
Here are the scenarios:
- i've added fields in the item level invoice worklist of the customers by enhancing structure FDM_COLL_INVOICE_ALV (appending fields to FDM_COLL_INVOICE)
- thru the implementation of the BADI FDM_COLL_SEND_ITEMS, i was able to retrieve the data specified by the user (Reference Keys in FB05)
- i've populated CT_EXT_ITEMS with the retrieved data
Now I need these data to be displayed in the added fields in UDM_SUPERVISOR.
What ABAP object/s is/are responsible for populating the process receivable details?
Thank you in advance for the assistance.
Edited by: JPLCaliuag on Dec 19, 2008 8:31 AM

Hi K.R.Reddy,
Can you kindly provide me with a working solution for this? I'm currently facing a similar issue for a similar BAPI (in my case it's BAPI_CUSTOMERRETURN_CHANGE) and can't seem to update the custom fields in VBAK. I have put in necessary values in the EXTENSIONIN table as well as updated the UPDATEFLAG indicator to 'U' and although it says that the order is saved, it seems to overwrite the custom field with its original value.
The custom field seems to get updated correctly when I use BAPI_CUSTOMERRETURN_CREATE but when I make changes using BAPI_CUSTOMERRETURN_CHANGE, it gets overwritten with the original value.
Any help is appreciated.
Thanks and regards,
Adeline.

Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
The field GAMNG is available in the communication structure maintainace.
The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase 002 ***********************************************************
Message no. D0322 ..
We deleted Setup table , Meins field already exist in comm str.
1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
Kindly suggest correct answer.
Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

Hi,
There could be a number of reasons why you are getting the error:
1. Fields are not assigned to datatypes.
- Check structure in SE11 and assign to datatypes.
2. There are inactive appends in the extract structure.
- Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
3. The appended structure is in a different development class from the one of the structure it is being appended to.
Please review and apply the following notes carefully :
766603 Activation problems with extract structures
623411 LBWE: Gener. terminates with D0 322 (end phase 002)
757923 LBWE: Generation terminates with D0 322 (end phase
600708 D0 322: End phase 002
It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
Check to see if this is the same on your system.
Rgds,
Colum

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

Adding fields in requisition iview

Hi guys,
We have enhanced Infotype 5125 adding a customer include with some extra fields. So we need a way to add those fields into the requisitions iview (requisitions/com.sap.pct.erp.recruiter.create). Is there a way to enhance, modify or customize this iview in order to add those customer fields?
Thanks in advance.

Hi,
you need to setup your NWDI server...connect the Developer's NWDS to NWDI ...create track for ESS on NWDI.....import the ESS .sca file into it.....then goto NWDS and import the Development Configuration file for your track.....create a project for the ESS DC you want to modify ...and goto the Webdynpro project to modify the screens or the code.....

Adding Fields to DataSource

I am trying to add REFBN and REFBT (TCRSA6)and it is not allowing me saying "Not Permitted" when I choose "Change dataSource". Any help appreciated.

Hi Tou Sy,
Follow these steps..
1. Goto RSA6
2. Select your datasource and click on enhance structure on the top tool bar.
3. then give any name to your enhance structure.
4. On the next screen in the components column enter the fieldname starting with ZZ (EX: ZZREGIO ....REGIO from LFA1)
5. In the componenttype column enter the DATAELEMENT type of the respective field from the table you intend to get the field from.
6. Enter Short description for your enhance structure.
7. Press ENTER...now you can see rest of the colums are filled.
8. Save it and activate it.
Then go back to RSA6...
1.select your datasource
2.click on CHANGE icon
3.IF you see a check mark in HIDEFIELD and FIELDONLY columns for the just added fields UNCHECK them and SAVE it.
4.GOTO RSA3 check if the data is coming.
Message was edited by: Srinivas

2LIS_02_ITM - Adding fields to communication structure - User exit

Hello,
I have read the weblog of Roberto Negro concerning the possibility of adding fields to the communication structure of an extractor.
In his article he talks about MCVBAK and so on and refers to enhancements MC10001, MC50001, MC60001.
I am trying to do the same with 2LIS_02_ITM.
The communication structures are MCEKKO and MCKPO.
Can someone explain how to proceed in order to locate the approporiate user exit ?
Claudio Ciardelli

Amit
How to Add payroll period fields(FAPER & IPERIN) to the structure HRMS_BIW_PY1.
These fields are coming from RT_person cluster table.
That will be great help..

Without EEWB Is it Possible to adding field to standard tab.

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Adding field in Report Painter

Hello Gurus,
I am working in the Report Painter PR20-001.
My requirement is to add a new column in the output of the report but even when i am able to add a new field and save it on the reports execution i am unable to view the added field in the output.
Kindly tell me the entire procedure to add a new field in the output of the respective report painter output.
Regards,
Swati.

Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Added fields not appearing in the DSO transformations.

Hi,
I have added three new info objects into data fields in the DSO then activated and not appearing added fields in the transformations.
Please suggest me,
regards,
Jayapal.

Hi Jayapal,
i dont know whether it would help you...you can give a try on it.
Instead of deleting the Transformation, just delete the mappings if any in the transformation.
Goto DS->Fields Tab-->In the Column Template info Object. Try mapping corresponding IO with the Source IO.
Then it will show a pop up give Copy . Activate the DS.
Goto Info Provider>Select the Transformation> If it is active-->reactivate it by clicking the Pencil Icon with glass and click activate icon.
If its not active, then reactivate it again by clicking the Pencil Icon with glass.
Let me know if it Works... Cheers
Regards,
Syed
Edited by: shameer83in on Nov 20, 2009 12:10 PM

Adding field in dynpro with MWMMOB01 enhancement

Similar Messages

Maybe you are looking for