Adding file extension manulay SSL module on CSS

Could anyone how can i manually add the file extension(Eg:-.jsF) as this is not by default supported on the firmware version 8.10 or 8.20 release. Hence can anyone tell me to add it manually?
syntax:url "/*.JSF ---Is this way do i need add the extension?????
Anyhelp would be greatly appriciated.
Regards
Neha.

Check answers in "Compression on Css 11501"
G.

Similar Messages

Quicktime automatically adding file extension?!

I use Quicktime for all my video playback - so i'm assuming my problem lies with this?
I do VJing and when I'm downloading video clips (non-mpg4) i.e. avi, flv etc - the downloaded files are adding a '.mpg' extension onto the file - so that it wont playback automatically in quicktime. For example a file downloaded called '1234.avi' ends up in my download/desktop folder as '1234.avi.mpg'?
The problem means I have to manually alter each file name deleting the .mpg file extension (and confirming each time that I want to change it) - so it will load in quicktime. I'm assuming it may be because I have ticked the box on 'always open this file type with quicktime' - which is what I want, but how do I stop it adding the file extension each time?

Thanks for your help. I wasn't aware you could disable that alert in the finder? I'll have to look at doing that.
Whilst I take your comments on board - are you suggesting that Safari (web browser being used) - is adding the file extension on download?

Hyperlink without adding file extension

I have created a website using iWeb and have several links on it to other files on my computer. IWeb overrides the text I put in as the link and adds the file extension to it. I have tried renaming the file without an extension but it is always put back by iWeb. How can I make sure the file extension is not viewable on the web page?

Highlight the link URL and overwrite it using the Link inspector.

Is there a shortcut for adding file extensions?

I have an archive of over 15,000 images, all TIFF, JPEG and Photoshop images. None of them have file extensions. They were saved back when Mac did not use extensions. Now they will not open if I just double click on them... I must add the correct extension, then it opens fine.
It will take me FOREVER to click on each one, type in the extension, then click "Add".
Is there a script or shortcut to name all these old files? Or shareware?
Or at the very LEAST is there a way to turn off that annoying dialog box to confirm that I want to add the extension?
Thanks, any feedback will be appreciated.

I have a whole lot of very old graphic files, and thought I would try Kappy's recommendation of Renamer4Mac, combined with a Spotlight search to see how speedily one could add extensions. So did a Spotlight search on a backup folder that contains many and varied sub-folders containing many and various images. To get the old pict files I hit command-F from the top level folder, selected that folder (WHY does search have "This Mac" as the default???), and for Kind I selected Other and typed:
Adobe Photoshop PICT file
in the blank field. It returned a list of 961 old pict files. Launched Renamer and told it to insert the text pct, at position 1 from left, suffix only. Then dragged a batch of the files from the search results window into the top pane of the Renamer window, clicked the Rename Files button, et voila'! The files were renamed (and no confirm dialog box).
To figure out what to put in the Kind:Other field, just do a search on Kind:Images and note the different types. Thus, something that needed the psd extension would be Adobe Photoshop file, to find tifs, it would be TIFF image. You might have some "QuickDraw picture" as an image kind, they are pict files. Plain jpegs can be brought up with Kind: JPEG image, extension jpg. And so on.
Francine
Francine
Schwieder

Adding file extensions

http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16410&sliceId=2
The technote listed here does a good job of explaining how to
add a new file type to Dreamweaver so that it will open the file
and also render in Design mode... but, I can't seem to drag and
drop the file onto the DW icon to open it. (I can do this with
GoLive which I'm switching from). Does someone know of a technote
or answer to this dilemma? This would be a huge time-saver for me.
TIA

This tutorial was written by Greg Rewis for SASS and LESS (CSS). But the basic procedure should work for any extension you're trying to add.
http://blog.assortedgarbage.com/2012/03/using-dreamweaver-with-sass-and-less/
Nancy O.

Adding File Extensions - Dreamweaver

I am having trouble adding support for a couple of extensions. I have successfully done this before (with different extensions and an earlier version of DW), by editing Extensions.txt and MMDocumentTypes.xml but this doesnt appear to be working for me this time.
I did try chat support, who sent me to telephone support, who left me on hold.. so hoping someone can help me here.

This tutorial was written by Greg Rewis for SASS and LESS (CSS). But the basic procedure should work for any extension you're trying to add.
http://blog.assortedgarbage.com/2012/03/using-dreamweaver-with-sass-and-less/
Nancy O.

What software do you suggest for adding file extensions

I need to open files with the extension vip & vp3, unable to do so at present. How can I open these and do I need to get some software?

Those may be Windows music files. You will need a Windows player most likely. That may mean running Windows on your Mac. To learn more do a Google search of your own.

Can't get DW to recognize new file extensions

I'm trying to get DW to recognize the following file
extensions as HTML: .pt, .zpt, and no extension.
I tried to follow the instructions in the article "Changing
and adding file extensions recognized by Dreamweaver MX": I entered
the two extensions in all caps in the :All documents and :HTML
documents lists in Extensions.txt. And (just as a guess) I tried
entering two successive commas, hoping they would be interpreted as
"no extension".
None of these tricks has enabled me to open any of the files
from the "Files" list in DW. I just get "Can't find a valid editor
for this file extension."

Thanks, Alan. I was indeed editing the wrong Extensions.txt.
Editing the one under "\Documents and Settings" rather than the one
under "\Program Files" did the trick (I'm running Windows XP).
Hope springs eternal, so let me pursue the question about
extensionless files one step more. I'm trying to use DW as the
editor for developing a Plone site. Plone's basic HTML files are
extensionless, and I fear it would screw up the links within Plone
if I added extensions to these file names. However: Within Plone, I
can designate DW as my external editor, and then (by clicking on an
icon in the Zope Management Interface that underlies Plone) open
the extensionless Plone files in DW (tho only in code view). How
come DW will open a file that was tossed over from Plone, but it
won't open the same file from its own "Files" list?

How to Filter Initial Client HTTP Headers on a CSS11506 SSL module

Is there any way to filter the initial client headers on a css11506 ssl module ?? (software version 8.1)
This is one of the default options on the "old" SCA11000 appliances.

Douglas, with an SSL module, the CSS can decrypt HTTPS traffic and see the cleartext HTTP traffic.
We can then apply any rules to the header.
I think in this case, the question refered to some data injected in the http header by the CSS and filter what data from the client certificate should be dropped or inserted.
We currently do not have this option on the CSS.
Gilles.

Xht file extension still requires manual configuration

to open the files with an xht extension with the File Panel, i needed to configure the following file:
/Users/me/Library/Application\ Support/Adobe/Dreamweaver\ CS5/en_US/Configuration/Extensions.txt
adding XHT after XHTML on the line for HTML documents enables Dr CS5 to open a file with an xht extension via the Files Panel.
maybe a future update will already include the xht extension as an HTML type of document.

Hi Ron,
as far as i know with regard to xht as a web standard, the xht file extension is used the same as the xhtml file extension (which is also my understanding for the use of htm and html).
w3c has a specific validator for XHTML 1.1 documents. there is a link from pages on my web site at http://www.enhanceability.com/0.xht (near bottom of the page).
i don't know how widespread support is for xht as XHTML (HTML) among the various browsers and apps and networks, however I can browse such pages with near lightning speed with Safari, Firefox, and some other browsers.
i just noticed that although Safari 5.0 renders an XHTML page with an xht file extension, when I try to save the page as page source it enforces the xhtml file extension, without allowing the xht file extension. (however i can rename with xht in the finder)
as far as Adobe Dreamweaver CS5, it seems that i needed to configure two files so that the FilesPanel could open a doc with an xht file extension, and also so that the code view of a document with an xht file extension also showed code highlighting.
Applications/Adobe Dreamweaver CS5/Configuration/DocumentTypes/MMDocumentTypes.xml
and
MyUser/Library/ApplicationSupport/Adobe/Dreamweaver CS5/en_US/Configuration/Extensions.txt
it was simple to add XHT after XHTML in the HTML documents lists, yet there must be a better way.
Yes, I am familiar with XHTML. I followed the link that you provided to here:
http://www.enhanceability.com/dev/0.xht
Which has a link to this page:
http://www.w3.org/MarkUp/2008/ED-xhtmlmime-20080618/
I think you have misinterpretted that information. I do not see anywhere on the W3C page that recommends using .xhtml or .xht file extensions.
I also found this FAQ that explains my understanding about XHTML documents:
http://www.webheadstart.org/xhtml/faq/index.html
Yes, it would be nice to have a UI to make adding file extensions to DW easier.
Regards,
Randy

CSS 11503 SSL Module: .pfx file export to sftp

Hello
I wanted to know of there was a way to export the .pfx files off of the SSL Module to an SFTP server.....preferably in bulk not one at a time. I want a central storage location for these files in the event that the CSS or the SSL module crashes.
Thanks

Hi Jay,
Sure you can export the .pfx files out of the CSS but you need to do this one by one, there is no way you can get them out all at once.
To export the files you first need to define your SFTP server IP address, username and passwd:
CSS(config)# ftp-record SFTP_Server 10.10.10.1 username "password"
Once you have the file name you need to enter this command:
CSS# copy ssl sftp SFTP_Server export Certificate.pfx PKCS12 "passphrase" "password"
: This is the password used to protect the file when it was created.
: This is a local significant password on the CSS used when the file was
imported into the box.
* If you don't know these passwds you can't export the files out of the CSS.
HTH
Pablo

CSS - 11506 - Adding New SSL Services on Single SSL Modules

Hi,
We are having one pair of CCS 11506 currently SSL services are running on slot4 with single SSL module.Now we are planning to add one more SSL application with different certificates & keys on different VIP.
Can we use the same slot4 for new application & using different certicates & keys on same SSL modules.Your reponse is appriecated

Hi Sean,
Thanks for replying back just want few clarifcations in configuration part.
1. If new vlan is given for new application then how to point routes to the new vlan as default routes to exisitng vlan is already present.
2. I've prepare sample config template with details steps & let us know will it work & if changes is required kindly let us know.
1.# ftp-record ssl_record 192.168.19.21 johndoe "abc123"
/home/johndoe
2.# copy ssl sftp ssl_record import rsacert.pem PEM "passwd123"
Connecting
Completed successfully
3.# copy ssl sftp ssl_record import rsakey.pem PEM "passwd123"
Connecting
Completed successfully
4.Enter configuration mode.
# config
(config) #
4. To use RSA public key exchange and authentication:
a. Associate the imported RSA certificate with a file.
(config) # ssl associate cert myrsacert1 rsacert.pem
b. Associate the imported RSA key pair with a file.
(config) # ssl associate rsakey myrsakey1 rsakey.pem
5. Compare the public key in the associated certificate with the public key
stored with the associated private key and verify that they are identical.
(config) # ssl verify myrsacert1 myrsakey1
Certificate mycert1 matches key mykey1
ssl associate rsakey NEWKEY newkey.pem
ssl associate cert NEWCERT newcert.pem
!************************* INTERFACE *************************
interface 3/3
description "****WEB SIDE****"
bridge vlan _ID_X.X.X.X
bridge port-fast enable
interface 3/4
bridge vlan_ID_Y.Y.Y.Y
bridge port-fast enable
description "****PIX SIDE****"
!************************** CIRCUIT **************************
circuit VLAN_ID_X
ip address A.A.A.A B.B.B.0
ip virtual-router 2 priority 101 preempt
ip redundant-interface 3 C.C.C.C
ip critical-service 3 chk-con-pix_Y.Y.Y.Y
ip critical-service 3 chk-con-web_X.X.X.X
circuit VLAN_ID_Y
ip address D.D.D.D E.E.E.0
ip virtual-router 4 priority 101 preempt
ip redundant-vip 4 F.F.F.F
ip critical-service 4 chk-con-pix_Y.Y.Y.Y
ip critical-service 4 chk-con-web_X.X.X.X
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list NEW
ssl-server 20
ssl-server 20 vip address F.F.F.F
ssl-server 20 cipher rsa-with-rc4-128-sha F.F.F.F 81
ssl-server 20 cipher rsa-with-rc4-128-md5 F.F.F.F 81
ssl-server 20 rsacert NEWCERT
ssl-server 20 rsakey NEWKEY
active
!************************** SERVICE **************************
service FRONT_SSL
type ssl-accel
slot 4
keepalive type none
add ssl-proxy-list NEW
active
service WEBSERVER-03
ip address G.G.G.G
redundant-index 3
protocol tcp
port 80
active
service WEBSERVER-04
ip address H.H.H.H
redundant-index 4
protocol tcp
port 80
active
service chk-con-pix_Y.Y.Y.Y
keepalive type script ap-kal-pinglist "N.N.N.N"
ip address J.J.J.J
keepalive frequency 2
keepalive maxfailure 2
keepalive retryperiod 2
active
service chk-con-web_X
ip address K.K.K.K
keepalive type script ap-kal-pinglist "P.P.P.P"
keepalive frequency 2
keepalive maxfailure 2
keepalive retryperiod 2
active
!*************************** OWNER ***************************
owner NEW
content BACKNEW_HTTP
vip address F.F.F.F
add service WEBSERVER-03
add service WEBSERVER-04
protocol tcp
port 81
url "/*"
redundant-index 5
no persistent
active
content FRONTENDNEW_SSL
vip address F.F.F.F
protocol tcp
port 443
application ssl
add service FRONT_SSL
active
content NEW
url "//www.ABC.com/*"
vip address F.F.F.F
protocol tcp
port 80
redundant-index 4
redirect "https://ABC.com"
active
your reply on this would be highly appericated.

CSS without SSL Module needing sticky sessions

Hello All,
If anyone can help with this sticky situation I'd appreciate it.
I have a customer with a CSS11501. He does not have an SSL module installed.
He has 2 blade servers, when he adds a web site, which is accessible over SSL, the CSS load balances client requests causing lost sessions, mostly lost pop-ups, it does not want stick to the same server.
I've configured the following:-
service web1
protocol tcp
port 443
keepalive type tcp
ip address 192.168.200.50
string web1
active
service web2
rotocol tcp
port 443
eepalive type tcp
ip address 192.168.200.51
string web2
active
content SSL_Web
add service web1
add service web2
rotocol tcp
port 443
vip address 1.2.3.4
application ssl
advanced-balance sticky-srcip-dstport
active
group web_Farm
add service web1
add service web2
vip address 1.2.3.4
active
I was attempting to get the client to stick to the server but unfortunately, this didn't work, the CSS seems to continue to send requests to both servers and they are getting scripting errors.
Once the customer turns off the second blade, all is ok.
I did try adding the string value to the service and configuring 'advanced-balance arrowpoint-cookie' in the content but the clients were unable to reach any web sites.
Best Regards Tony

Tony,
The config looks fine other than the "application SSL" under the content rule, and right now you are probing the servers with a tcp probe on port 80. If you want the probe to be on port 443 you should add the command "keepalive port 443" to both of the services. The CSS will default to port 80 for a tcp probe.
Regards
Jim

Dreamweaver Extension to view all included CSS files in a document?

Is there such an extension that would allow you to view, via a panel, all inlcuded CSS filed within a document?
It would be so nice to see a nice list of all of your included CSS files, especially when there are several, and also being able to launch them and edit them without having to go into code view within the document, find the reference, and then Ctrl+D to edit the stylesheet. I swear I saw something like this once, but I can't find it anywhere now...

Have you looked in the CSS Styles panel? If you have "All" selected, then you can see cach attached CSS file and perofrm any edits you want to and not have to open the files. Also, if you have Dreamweaver CS4, then the Related Files bar lists all related files, including any CSS files and you can select the CSS file name and you can edit the files directly.
While in the CSS Styles panel, if you right click on the selector, or on the properties for a selector, then you can choose Goto Code which will take you to the correct file and the correct line for the code of the specific selector.
Or am I missing something that you're trying to accomplish?

CSS with single SSL module.. balance option needed?

Hi all,
Quick question. If you have a CSS 11503 with one SSL offload module installed.. is there any point in using the "application ssl" and "advanced-balance ssl" options in the content rule? I can't find any info that tells me for sure but I'm guessing that these options can be used to balance between multiple ssl modules and provide stickiness to the modules etc.. but doesn't have any effect on the traffic distribution and stickiness to the backend server services?
For example if I have a L5 content rule like the one below and only one SSL module, should i remove the "application ssl" and "advanced-balance ssl" options and just use the port 80 content rule which the ssl proxy lists offloads traffic too and apply the "advanced-balance sticky-srcip-dstport" and "balance leastconn" there ?
content DEVCOM_TCP443_L5
    vip address x.x.x.x
    application ssl
    advanced-balance ssl
    protocol tcp
    port 443
    url "//dev.subdomain.domain.com/*"
    add service ssl_module1
    active
I have read various forum postings and i read the CSS SSL config guide but the examples all seem to differ in their implementation.
Many thanks
Scott

You're correct.
There is no need to specify the application type as ssl and the advanced-balance method when using a single ssl module.
Gilles.

Adding file extension manulay SSL module on CSS

Similar Messages

Maybe you are looking for