Adding link to custom annotation.

Hi all...
I am developing a plugin that stamps custom annotation to a pdf file.
I would like to add a link to it by adding another annotation of type 'link' just above it.
But the link is not working when it is above my custom annotation.
(When it is not above the custom annotation this URI link is working fine.)
I also tried with Acrobat 9 Pro's link tool. The link provided by this tool
is also not working when it is above my custom annotation. Is this a bug in
Acrobat or due to some reason is this not recognizing by custom annotation?
But in both above cases the link (made from my plugin and Acrobat's tool) are get
selected and active temporarily on tab press.
Please help me to set link annotation on a custom annotation.
Regards
Sudhin.
I

But when i changed my stamp Subtype to 'Stamp'(Subtype of rubber stamp)
i could able to add link to my stamp.Then why i couldn't add link to a custom stamp.
If acrobat could place the link on top of rubber stamp(Subtype :Stamp), can anybody say how they
implement this. The same implementation may help my custom annotation to add link above it.

Similar Messages

Adding links to custom ui's, into the workcenter view in PPM5.0 using nwbc

Hi Experts
I need to add custom developed webdynpros as links, in the workcenter view under Portfolio Management Portal Role.
Please guide me on how to do this on PPM5.0 using nwbc.
Thanks.
Regards
Khopotso

Hi Amit
I needed to add links to the left hand side of the navigation panel. This is done through the PFCG Role-Menu.
Thank you for you input.
Regards
Khopotso

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

You've probably found an answer to this by now, but I think this has been addressed in another forum -- The link below suggested using a button and adding the tooltip to the button.
https://forums.adobe.com/thread/304974?start=0&tstart=0
Sounds like it would work but I haven't actually tried it.
Good luck~!

Custom Annotation :: inject object at runtime

I would like develop a custom annotation to inject object at runtime. The annotation will work as follows
1. develop ValidatorClass annotation on type.
2. If annotated on a type object will be created at runtime and injected to the object. e.g. in class A it will inject validatorimpl object to vald object/
Please let me know how to implement that.
package com.debopam.validate
public interface validator{
public String validate();
package com.debopam.validate
public class validatorimpl implements validator{
public String validate(){
   return "true";
pckage com.debopam
public class A{
@ValidatorClass(name="com.debopam.validate.validatorimpl")
validator vald;
}

yogeshd,
It might be that the .class file for the annotation that you are compiling against is the one you have given us the source code for above, but when you run the program, the class file for the annotation is not the same, and is one that was compiled before you added the static field.
This can happen if your classpath is wrong. (and would explain why the problem only occurs sometimes - because it is only failing when the classpath is wrong).
If you run the following program with the Fully qualified name of your annotation as the argument, and with the same classpath as you run your program, it can tell you where it is finding the annotation class file. Check that this is the same one that you are compiling to.
class WhereLoaded {
    public static void main(String[] args) {
        Class theClass=null;
        if(args.length > 0) {
            try {
                theClass=Class.forName(args[0]);
            } catch (Exception e) {
                e.printStackTrace();
                theClass=Object.class;
        } else {
            System.out.println(
                "The first argument should be a fully qualified class name," +
                " using java.lang.Object instead"
            theClass=Object.class;
        String name=theClass.getName();
        name=name.substring(name.lastIndexOf(".")+1) + ".class";
        System.out.println(name + " loaded from " + theClass.getResource(name));
}regards
Bruce

Navigation column link on Custom Homepage Report

I have a working navigation column to another report when viewing the report from the shared folder. If I add the report to the homepage as a custom homepage report the navigation link on the column values no longer works.
The value from the homepage report goes to https://secure-ausomxgea.crmondemand.com/OnDemand/user/ReportIFrameView?SAWDetailViewURL=saw.dll%3fGo
Any thoughts on why it works on the report itself but not when the report is added as a custom homepage report? Any work around or other type of link to try to get to another report?
Thanks
Edited by: Cor on Jul 7, 2009 11:34 AM

I was able to create an html link on a new column. Now I'm trying to make the text be dynamic.
Is it possible to have an html column with the text for an html link to be based off of a field?

How to add .js link in custom list form through sharepoint designer 2013

hi friends
so far i was adding jquery code to script editor webpart in custom list form.
but i need to know how to add .js link in custom list form through sharepoint designer 2013
please help me.

Hi,
We can add the "JS Link Property" in the “WebPart” node in the custom list form page through SharePoint designer 2013.
Here is an example for your reference:
<JSLink xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm">~site/Style Library/js/custom.js</JSLink>
Noticed that, we should not lose the 'xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm' attribute.
Best Regards
Dennis Guo
TechNet Community Support

PDF Custom Annotations Types?

Can some kind reader comment and/or point to documentation on PDF's Custom Annotation Types?
I was first introduced to those by Aandi Inston's reply to my "Click to Dial Plugin" posting.
Unfortunately, such posting seems to have been pulled (lost?, relocated?, bitbucketed?) from the forum.
My objective is to programmatically insert several links of different types in my PDF files. I intend to have a type for voice phone numbers, another for fax numbers, and yet another company or client ID, etc.
The part below refers to a plugin (to be written).
Later on, when the user clicks on a phone number, a call will be placed, clicks on a fax number will result in the document being faxed, while a click on an ID will result on a database lookup.
I don't want to go through the hassle of studying the page's geometry to determine whether a phone number is voice or fax. I am just looking for a way to mark the different links, giving each one of them a type, which will be passed to the plugin upon a link being clicked.
I recall that Aandi's explanation made an exact match for my application, but as I said before, his posting is gone.
-Ramon

Perhaps the use Custom Annotation Types (CAT) is an overkill? It seems that when a CAT is defined, an annotation handler has to be registered, and such handler provides the drawing. In my case I don't need any custom drawing. I just need to mark somehow the different links, assigning a type to each.
Thanks for sharing your expertise, and helping the PDF format to become more useful and widespread...
-Ramon

Added Link at messageLovInput through personalizaton and getting error

Hi Friends,
While creating work order in eAM, Material Requirements secon is there, there we can find Item messagelovinput field. My clients wants to check Item details while selecting the item (long desc, on hand quantity etc..). For getting this functionality developed one custom page with item details and calling that page using link at item lov.
1) added link at results table of Item lov and given at destination URI as follows
OA.jsp?page=/xxnwc/oracle/apps/eam/workorder/webui/XXNWCItemDetailsPG&addBreadCrumb=Y&org_id={@OrganizationId}&inv_id={@InventoryItemId}.
Issue
1) open Item lov click on go --> we will get item in results table --> click on item details link --> open new custom page
2) click on quick select at item then getting error like as follos
Error: Cannot Display Page
You cannot complete this task because you accessed this page using the browser's navigation buttons (the browser Back button, for example).
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's
navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
Please let me know how to resolve this issue.
For replicating issue you can go
Responsibility: Maintenance Super User > Work Orders tab> then go to “Material Requirements” section. > add link to Item lov
Thanks in Advance,
Hanimi.

I'm a great fan of problems magically fixing themselves ... always breathe a sigh of relief if that happens during a troubleshoot.
I was wondering about trouble with a piece of album art initially. But if that was afoot we'd expect the synch to be always dying on the same song (or songs from the same album).
Perhaps it's just that the USB connection is getting grumpy during a *really long* sync. If that's what is going on, we could be able to make some progress by moving the music across in smaller batches.
Switch the iPod over to manually managing content. Select a chunk of songs ... say, about 1.5 GB-worth, and copy them over.
Does that complete successfully? If so, select another batch of about 1.5 GB, and copy them over, and so on until you've got the songs on. Once you've done that, you can switch her back to your preferred auto-sync settings.
Any better luck getting stuff on in stages like that?

Running custom annotations from ant

I know this may be the wrong forum for such a question but figured someone ,ight have done it b4 and will not mind telling me
I want to know how to run my custom annotation processor from an ant build script.
I can run it from commanline but i dont know the ant targets fro doing it

Vikas:
Can you help me with this one too.....
I am trying to add a custom page in iproc. According to the dev guide I should use the same AM that iproc uses. so I used ShoppingAM provided by Oracle. I extended it and created my own Am called DKSearchAM. But when I try to run the page from Jdev I get the following error messages.
I brought ShoppingAM.xml file from the server and added it to my project and then updated it to create ShoppingAMImpl.java file.
Please help!!!!!!!!
I get the following error:
Project: DKSearchOAProject.jpr
C:\JDev\jdevhome\jdev\myprojects\oracle\apps\icx\icatalog\shopping\server\ShoppingAMImpl.java
Error: can't read: C:\JDev\jdevhome\jdev\myprojects\oracle\apps\icx\icatalog\shopping\server\ShoppingAMImpl.java
C:\JDev\jdevhome\jdev\myprojects\dekalb\oracle\apps\xxdk\search\server\DKSearchAMImpl.java
Error(2,49): cannot access class oracle.apps.icx.icatalog.shopping.server.ShoppingAMImpl; file oracle\apps\icx\icatalog\shopping\server\ShoppingAMImpl.class not found
Error(8,37): class ShoppingAMImpl not found in class dekalb.oracle.apps.xxdk.search.server.DKSearchAMImpl

Custom Annotation showing Error: is missing clinit

Hi!
I have created some custom annotations for use in my project. Sometimes they show error: is missing <clinit> and sometimes they don't. I'm confused. If I create a jar and use that jar in another project this error appears at compiletime .
Here is the source of one of my custom annotations....
import java.lang.annotation.ElementType;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;
* User: yogeshd
* Date: Mar 30, 2007
* Time: 10:54:31 AM
@Constraint
@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.FIELD)
public @interface ConstraintMaxIntValue {
public Validator validator = new MaxIntValidator();
int value() default 0;
The strange thing is that this error doesnot appears all the time...
If anyone can explain the reason I will be enlightened. ;) thnx.

yogeshd,
It might be that the .class file for the annotation that you are compiling against is the one you have given us the source code for above, but when you run the program, the class file for the annotation is not the same, and is one that was compiled before you added the static field.
This can happen if your classpath is wrong. (and would explain why the problem only occurs sometimes - because it is only failing when the classpath is wrong).
If you run the following program with the Fully qualified name of your annotation as the argument, and with the same classpath as you run your program, it can tell you where it is finding the annotation class file. Check that this is the same one that you are compiling to.
class WhereLoaded {
    public static void main(String[] args) {
        Class theClass=null;
        if(args.length > 0) {
            try {
                theClass=Class.forName(args[0]);
            } catch (Exception e) {
                e.printStackTrace();
                theClass=Object.class;
        } else {
            System.out.println(
                "The first argument should be a fully qualified class name," +
                " using java.lang.Object instead"
            theClass=Object.class;
        String name=theClass.getName();
        name=name.substring(name.lastIndexOf(".")+1) + ".class";
        System.out.println(name + " loaded from " + theClass.getResource(name));
}regards
Bruce

Where is the Just added link in iTunes 10.7

Updated to iTunes 10.7, where is the Just Added link hiddden, It was there last week.

The "recent releases" is all that seems to be available now. Whether the old "just added" section will ever reappear, no one here can say. You can express your desire for that section via Apple's feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
It's been removed before and then reinstated, so it's possible they'll bring it back.
Regards.

How link Vendor & customer Legers in SAP

Hi please suggest how link vendor & customer lagers. please also suggested which T code use for linking in SAP with process note.

Hi Arnav,
There are some pre-requisite configuration:
1. Change field status of Customer Account group:
Path: IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Account Groups with Screen Layout (Customers)
a. Choose your customer group, choose General data tab, choose Control tab, change status of "Vendor" field to Optional.
b. Choose your customer group, choose Company code data tab, choose Payment Transactions, change status of "Clearing with vendor" to Optional.
2. Change field status per Activities:
Path: IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Screen Layout per Activity (Customers)
NOTE: you have to change the status of necessary fields in all activities (Create, Change, Display) in all level (Accounting, Centrally)
a. Choose General data tab, choose Control tab, change status of "Vendor" field to Optional.
b. Choose Company code data tab, choose Payment Transactions, change status of "Clearing with vendor" to Optional.
3. Change field status of Vendor Account group:
Path: IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Vendor Accounts > Master Data > Preparations for Creating Vendor Master Data > Define Account Groups with Screen Layout (Vendors)
a. Choose your vendor group, choose General data tab, choose Control tab, change status of "Customer" field to Optional.
b. Choose your customer group, choose Company code data tab, choose Payment Transactions, change status of "Clearing with customer" to Optional.
4. Change field status per Activities:
Path: IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Vendor Accounts > Master Data > Preparations for Creating Vendor Master Data > Define Screen Layout per Activity (Vendors)
NOTE: you have to change the status of necessary fields in all activities (Create, Change, Display) in all level (Accounting, Centrally)
a. Choose General data tab, choose Control tab, change status of "Customer" field to Optional.
b. Choose Company code data tab, choose Payment Transactions, change status of "Clearing with customer" to Optional.
Business process:
- In vendor master data, you have to fill the customer code in "Customer" field and tick on "Clearing with cus" checkbox
- In customer master data, you have to fill the vendor code in "Vendor" field and tick on "Clearing with vendor" checkbox.
Then, post transaction as normal.
Check report:
You can check all items in report FBL1N or FBL5N.
Example: inFBL1N - Vendor Line Item Display, in the selection screen, you tick on "Customer items" checkbox, the report will show all items, even though you post in Vendor or Customer size.
Do the same with FBL5N.
Regards,
Julie

Adding fields to custom idoc type

Hi,
i have a query regarding adding fields to custom idoc type.
To add fields to custom idoc type we are trying to cancel the release from we30, but we are facing error that 'The release of basis type cannot be reset'
When we are trying to cancel release from we31we are facing error 'Error while ressting release of segment z type'.
Kindly suggest the solution to add fields in basic idoc type.
Thanks & regards,
Farheen.

Reason that you are getting these errors is that you cannot cancel
the release of an extension made in previous version . Instead you have to create a new extension.
1.It is not possible to change a segment definition which is released in a
lower release.
2.You must create a new segment definition for the new release e.g. 620 with a new segment
field with the appropriate length.
In transaction WE20, outbound parameters, you can specify
the "segment release in IDoc type" for the communication.
Please read the F1 help of this field for further information.
3.For your own segments you can define a new version of the segment
tcode WE31 -> Add Version
Thanks!

Simple example of a custom annotation    for log

Please help me write me my custom annotations. I like to use them to provide log ,security etc . I did not find articles where I can write my annotation to change the behaviour. Suppoe I decare annotation on a method , I want jvm to call code in my annotation where I can control the behaviour of the method similar to aop stuff ,
here is what i need
MyClass {
@MyCustomAnnotation
   void myMethod(){
}now I want MyCustomAnnotation to log that this method is begin called can I do this ?

I can think of only one way to do something like this, and it's messy:
Let's say your code looks like this:
public class MyClass
    @MyLogging
    public void myMethod(String arg)
}Have your @MyLogging annotation processing generate a new Class source that extends your original class and overrides the methods that you've annotated with code that looks something like this:
public class MyClassGenerated extends MyClass
   Log log = ... // create a logger
    @Override
    public void myMethod(String arg)
        log.info("myMethod called");
        super.myMethod(arg);
}Now you'll have to change your code to use MyClassGenerated instead of MyClass, which presents its own problems... you may be able to add in some kind of factory mechanism or something to make that work easier.

Link between customer and condition records

Hi All,
I am developing a pricing report which display prices and condition types with customer numbers where can we can find out the the link between customer and condition record?
Thanks&Regars
Mahesh

hi,
customer tables start with K such as KNA1, KONV.
Conditions are stored in several tables:
KONH, KONP are most important general tables;
so check the link between those tables like

Adding link to custom annotation.

Similar Messages

Maybe you are looking for