Adding material column in FS10n layout

Hi all,
Can anyone guide us in adding the material field into FS10n report.
The filed is not appearing as part of the layout
Thanks in advance

Thank you,
but i have noticed that once we give the GL,company code,year we get the result.
in the result if we click it takes us to the documents involved .
Here i have seen material and material type in another SAP setup.
So i think it should be customizable as aspecial field from a table say bseg or bkpf.

Similar Messages

How to get Material column in FBL5N

Hi Experts,
Our client has a requirement where they want to have material as a column in FBL5N report. Using the layout we are able to add material column. However, it is blank for all line items. We understand that in FBL5N, we get FI documents and billing document may have more than one line item with more than one material.
There is a SAP note in this regard, note number is 215798. This note ensures special fields in table T021S are consistent with the structure RFPOSXEXT. This setting is already available as per our technical team.
Request you to help us find what is missing.
Regards,
Vijay

Dear,
Please check below information found on SDN. Hope this will helpful for your requirements.
In general if you want to inlude a special field to the line item display, you have tp proceed as described in the note 215798. These
fields have to be defined in transaction OBVU. Then the special field should exist in structure RFPOSXEXT. The program RFPOSXEXTEND eliminates inconsistency in RFPOSXEXT and program BALVBUFDEL eliminates buffer inconsistency.
However these fields are different from the normal special fields:
For the FBL*N you have defined the 'Material Number (BSEG-MATNR), Quantity (BSEG-MENGE) and Purchase (BSEG-EBELN)' as a special field.
Such a special field is not read from the index tables (BSIK/BSAK) like the other ones, it directly gets read from the BSEG or BKPF table. If you check all items for the Company Code xxxx now in the FB*1N nowhere is the 'Material Number, Quantity and Purchase' displayed.
But this is absolutely correct, as also in the BSEG table there is no material number, quantity and purchase updated for the 'Vendor' line items of all documents.
Reason:
Since Release 3.0, several purchase orders can be offset in one invoice. As a result, different purchasing document numbers (BSEG-EBELN) can be contained in the different G/L account line items. As a result, it is no longer possible to enter a unique purchasing document number in the customer/vendor line item. Field BSEG-EBELN is not filled in the vendor line item and therefore cannot be displayed in the line item display for customers/vendors. Please also check note 152335.
So if you check you will see that in the vendor line item none of these fields are filled so they are not in the table BSEG. That is the reason why the value is not displayed because is not filled in the table which gets read. So the values of these fields cannot be shown in FBL1N.
In the FI normally the Quantity is not a 'real' important field, as it is more related to the MM area. But in the old 'Profit Center Accounting' and the old' Special Ledger' the field has been important. As the same logic of these areas to 'store' the Quantity is also used in the NewG/L the field get only filled in the line, where it make 'sense' because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is filled in the correct and important lines and postings.
Transaction FAGLL03 shows the quantity like posted in table FAGLFLEXA. Please have a look at the note 1063198 which explains why the quantity is different in BSEG and FAGLFLEXA.
In FI as standard we would not expect to see VBEL2 populated in FBL*N as this field is not included in BSIS. The reason why SAP designs this way is that sometimes many sales orders are paid by one billing document.
The field billing document 'VBELN' is contained in table BSEG AND in table BSID but NOT in table BSIS.
Same occurs with BSEG-MATNR (material) and BSEG-MENGE (quantity).
In order to display these fields, you will need to create them as special fields:
1)Please create fields BSEG-VBEL2, BSEG-MATNR and BSEG-MENGE as special fields in transaction OBVU (FBL3N >MENU >SETTINGS >SPECIAL FIELDS);
2)SE38->program "BALVBUFDEL"->select indicator "Reset only EUINFO/LTEX" ->run
3)Create a variant in FBLN to include this field (FBLN > SETTINGS > DISPLAY VARIANT > CURRENT... Add the required fields (1-U-VBEL2...)
If they do not come up as a Special Fields in the Hidden Fields list, run RFPOSXEXTEND and wait for a few hours. 1-U-VBEL2... should then be available in the list.
Also check Notes 215798 and 373268.
Please consider that you can display sales,material document and quantity in transaction FBL*N, but only if the field is filled in.
Kindly check in tables BSEG and BSIS if they are updated. Should the same are empty in the data base tables it would be totally
correct if the fields are shown blank in FBL*N.
Regards,
Syed Hussain.

How to add get the field name for a newly added site column.

I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
Regards

Hi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Data columns in BPS layout

Hi,
My current BPS layout has three columns, they are cost,price and margin respectively. The user now ask to add another column call "alert" after the margin column.
The logic is that if the margin is less than 10%, then the alert column should marked with "X", otherwise leave it blank.
In order to add a column after margin column, the added column have to be key figure which will not allowed characteristics,while all the other key figure type such as amount, quantity, date ect will not take
"X".
Any idea or suggestion.

JW,
If Margin is the last column on your layout, what you do is in the last layout definition screen, add the locl excel formula to the column after where the margin would appear. Then you just use simple excel formula to do it.
For things to appear only if there is data in the row, I typically use an IF in the excel formula and check for values in cost, price, margin. Actually it would be 2 nested IFs. One to check for value and the other to determine the 10% and mark it with a X... In purely excel formula, there is no distinction between key figures and characteristics since it is only Excel.
Hope this helps.

Material Column Invisible in Purchase Order Screen after Technical Upgrade

Hi Freinds,
Subject: MEPO1211-EMATN field invisible in Purchase Order (ME21N)
We are doing an SAP Technical upgrade project from 4.6C to ECC6.0. The 4.6C developement box is upgraded to ECC6.0. I found that the Material Column is missing from the Purchase Order Item.
In the right side of item screen, we can see the configuration icon. I have checked that configuration icon - Administrator - MEPO1211-EMATN - field is enabled in the invisible column.
I tried all the possible ways to disable the tick mark. still problems persists.
please let me know how to disable the tick mark (MEPO1211-EMATN)
Thanks
Ashok

Hi Guys,
I found the Problem. Let me share with you all.
For the Purchase order document Type NB - i found the corresponding field selection NBF.
Then i went to NBF screen layout and enabled the material as optional entry.
I have opened the Purchase order screen (ME21N), material column is diplayed.
Thanks
Ashok

Retain field order on form when adding/deleting columns

If I move my html around to change the layout of the fields on an AddForm.aspx and then I start adding and deleting columns, the ordering of the ff## changes and I can have problems.
Its fine if I've only added new columns...what I've done is create an AddForm1.aspx to get the fresh ff##'s at the end of the list. I copy them over to my AddForm.aspx
If I add and delete columns, then I can have problems.
The ff## may be renumbered when making an AddForm1.aspx and copying the new fields might create an error because of dupe ff##'s.
If I use AddForm1.aspx, I lose my layout of the fields on my form AddForm.aspx.
I have been successful finding the ordering of the columns on AddForm1 and renumbering on AddForm.
But this is pain and error-prone.
What do people do to get around this dilema?
thx
Rich

Hi,
By default, we can change the order at the Lists content type settings page.
I suggest you provide more information about your requirement(screenshot) to make others easier to find a solution for you.
More information:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/31a5030b-9494-4057-b4ad-485435fdceb0/sharepoint-designer-2010-reorder-fields-for-newform-edifform-viewform?forum=sharepointgeneralprevious
http://kalsing.blogspot.com/2006/11/create-custom-list-form-for-sharepoint.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Additional fields not showing in FS10N layout

Hi ,
1) appended new fields into RFPOS and RFPOSX structures and run the program RFPOSXEXTEND
2) created BTE to get values for additional fields added
it was fine working in DEV , once it move to QAS additional fields are not showing in the FS10N layout
same steps are processed as in QAS as i din in DEV, sturcture as got fields and BTE is fine
Why the additional fields are not showing up ...
Regards,
Pradeep

How come i would be posting here without checking the layout , new fields are not in the layout even though it shows in the structure RPOSXEXT.
FS10N layout - added new fields in dev using structure and run the program to extend the structure , new fields and data show in DEV , same process i did but it doesnt show in QAS .
Would be any configuration issue or any other i need to check ....
Edited by: Pradeep Annaiah on Jul 20, 2011 10:35 PM

Material description in FS10N Report.

Hello All,
We want to populate material description in the FS10N report. The field is available but text is not appearing for any transactions.
Please provide your valuable inputs, thanks in advance.
Regards,
Ratnam

Hi,
you will get Material Discription in FS10n through user exit,
Please discuss with APAPer and find the user exist.
Regards
Viswa

Adding a column in the MSS Approval view

What are the options for adding a column in the MSS approval view (CATS regular) ?

there are lot of colums available in cats customisation for this
Please check
In the IMG (transaction SPRO), go to
- SAP Customizing Implementation Guide
- Cross-Application Components
    - Time Sheet
      - Specific Setting for CATS regular
        - CATS regular
          - Approve Working Time
            - Define Field Selection for Individual Approval View
            - Define Field Selection for Detail View
Here you can assign lot of columns to your profile
which is easily customisable

How do I set individual properties for a column in report layout at runtime

How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g.
I need to change either the "Read from File" attribute or the "File Format" attribute for one column based on the user's input. IS this possible?
Thanks in advance!

Hi,
define 2 columns and use format triggers to show the one or the other column.
Regards
Rainer

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

FAGLL03, FS10N (Layout), FBL3N Customer No not Pick

Dear All,
when my user go for GL line item level through FAGLL03, FS10N (Layout), FBL3N customer no not picking line layout
In that perticuler GL account Sort key also assign Customer no but line layout cutomer field is there but not pick the customer no
Pl help this issue
Regards
KSP

Hi:
I again assert the same thing..No matter what you maintained in sort key field like PO numbers, vendor or customer numbers can be fetched in reports in FBL3N, FAGLL03 or FS10N line items.. Reason i quoted above..However you have an option to fetch this field using Business transaction event 1650 using FIBF..Your ABAPER will need to modify structures and then modify the contents..Please check it with your ABAPER , i am sure you will get your issue resolved..
Regards

Planning Layout error K9162 - max number of columns in planning layout rest

Hello collegues,
our client would like to have 34 columns in planning layout costs activity inputs of TA KP67. But error message K9162 - max. number of columns is restricted to 30. So I tried to switch of the message with TA OBA5 application area K9 - msg number 162. But this does not work as the error comes up again even though the message is switched off.
Do you have some ideas?
Thanks and regards,
Christian

Hello,
thanks for your response. I have maintaine in OBMSG:
K9 162 WE E switch off selected
then in OBA5 for dialog and batch I have maintained -
but the error is upcoming again. So I think that this sort of message cannot be switched off as the planning layout is restricted to 30 columns by design maybe?
thanks and regards,
Christian

How to change width columns in web layout?

hello,
I have problem with change width columns in web. I can change width column in paper layout and is ok but If I run web layout I get one column very wide and second thin. I cant find where I may this change
I find that is no easy. If you want change property in web layout you must edit JSP file, and you must know Java/JSP/HTML, and library reposrts JSP custom tag and reports xhtml tags.
regards
Edited by: user515960 on 2010-07-11 04:23

Hi,
Please refer the below reference which may guide to configure the properties in search result webpart.
http://technet.microsoft.com/en-us/library/gg549987(v=office.15).aspx
If its not helping you please let us know.
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Help for fixed columns in web layout

Hi all,
I'm facing the problem of Fixing the column of web layout,I know there's a post of solving this,
Fixed Rows/Columns in Web Interfaces
but all the download links in this post are expired,could any one send me the file or the how to documents to [email protected]? thank you very much!
thank you all.

Denny,
The easiest way is to use the Microsoft OWC (office Web component) and you can have Excel on the web where you have to publish the layouts for the web.
If not, and you use pure web, Olaf Fisher's paper might be published as a how to guide by now. I would suggest a search on SDN. I have downloaded the file a long time ago but I think it is on the server in the office.

Adding material column in FS10n layout

Similar Messages

Maybe you are looking for