Adding more RAM to my MacBook Pro

I have a MacBook Pro 2.4 GHz with 2 GB 667 MHz DDR2 SDRAM and need to add more ram. can i, and if so, what kind should i get? what's the most I can add? recommend any non-apple brands like kingston? (since it'd be cheaper and i can have a friend install it)
thanks!

Yes you can, up to 4 GB, you can also use Kingston, Crucial (which I've used on two notebooks and my MacPro and PowerMacs, OWC, etc.
http://www.crucial.com/
Message was edited by: deggie

Similar Messages

  • Will adding more ram to my Macbook Pro make it faster?

    So I have about mid-2010 Macbook Pro and after all these OS upgrades throughout the years (currently running OSX 10.9.5), it's starting to run annoying slow but still useable. My specs on this Macbook is a 2.4 GHz Intel Core 2 Duo processor and 4 GB of ram. If I upgrade my ram to 6 or 8 GB will my Macbook run a lot more faster? I use my Macbook mostly for entertainment purposes such as web browsing, movies and music as well as for school mainly Microsoft Powerpoint and Word. Also, if I were to upgrade my ram is it as simple as popping out the old ram and installing the new ones? Thanks.

    Hi kidrobot123,
    Thanks for your question.  Think of Random Access Memory (RAM) as the amount of information your computer can think about at any one time.  Your operating system requires a certain amount of memory for basic functions.  Every software program that you have open needs memory as well.  So, increasing the available memory is one of the things you can do to improve performance.  
    The resource below explains how to do it.  I've highlighted the section of the article that pertains to your Mid 2010 model.  Click on the link for more details.
    MacBook Pro: How to remove or install memory - Apple Support
    http://support.apple.com/en-us/HT201165
    MacBook Pro (15-inch, Mid 2010), MacBook Pro (15-inch, 2.53GHz Mid 2009), MacBook Pro (15-inch, Mid 2009)
    Number of memory slots
    2
    Base memory
    4 GB
    Maximum memory
    8 GB
    Memory card specifications
    - Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
    - 30mm (1.18 inch)
    - 2 GB or 4 GB
    - 204-pin
    - PC3-8500 DDR3 1066 MHz type RAM
    Additional notes
    For best performance, fill both memory slots, installing an equal memory module in each slot.
    Removing or installing memory
    Warning: The internal components of your MacBook Pro can be warm. If you have been using your MacBook Pro, wait ten minutes after shutting down the computer to let the internal components cool before continuing.
    Step 1: Remove the bottom case
    Shut down your MacBook Pro. Disconnect the power adapter, Ethernet cable, USB cables, security lock, and any other cables connected to the MacBook Pro to prevent damaging the computer.
    Turn over your MacBook Pro and remove the ten (10) screws that secure the bottom case. Because the screws are different lengths, note the screw lengths and locations so you can replace the screws correctly. Put them aside in a safe place. Lift off the case and place it to the side.
    Touch a metal surface inside the computer to discharge any static electricity from your body.
    Step 2: Remove existing memory (if present)
    Push the levers on the sides of the memory module in an outward direction to release the module from the memory card slot. The memory pops up at an angle. Before removing it, make sure you find the half-circle notches. If you don’t, try pressing the levers outward again.
    Hold the memory module by its notches and remove it from the slot.
    Remove the other memory module.
    Important: Hold the memory modules by their edges, and do not touch the gold connectors.
    Step 3: Install memory
    Align the notch on the gold edge of the module with the notch in the lower memory slot.
    Tilt the card and push the memory into the slot.
    Use two fingers with firm, even pressure to push down on the memory module. There should be a click when you insert the memory correctly.
    Repeat this procedure to install an additional memory module in the top slot. Press down on the module to make sure it is level.
    Note: Make sure you install the memory according to this illustration, with the gold contacts inserted almost completely into the connector.
    Step 4: Replace the bottom case
    Replace and tighten the ten screws you removed earlier, making sure to put the different length screws in their proper locations.
     The resource below provides some other considerations to improve your computer's performance using Mavericks.OS X Mavericks: If your Mac runs slowly
    http://support.apple.com/kb/PH13895
    OS X Mavericks: If your Mac runs slowlyIf you find your Mac is running slowly, there are a number of potential causes that you can check.
    An app you’re using may require more memory than your computer has easily available. To see how much memory your computer has, choose Apple menu > About This Mac. See the help that came with the app to find out what it requires. To find out how to increase your computer’s memory, see the documentation that came with your computer.Find the manual for your Mac 
    Quit any app that isn’t compatible with your computer. For example, an app may require a different processor or graphics card. See the documentation that came with the app to find out what it requires.
    To see what processor your computer has, choose Apple menu > About This Mac.
    To see what graphics card your computer has, choose Apple menu > About This Mac, click More Info, then click Displays.
    Your computer’s startup disk may not have enough free disk space. To make disk space available, move files to another disk, then delete files you no longer need on the startup disk.Increase disk space
    Quit any apps you’re not using.
    Use Disk Utility to verify and fix any issues with your hard disk.If you have problems with your disk
    Use Activity Monitor to see if a particular app or activity is making a large demand on your Mac.
    Last Modified: May 8, 2014
    Cheers,
    - Judy

  • Want to buy more ram for my macbook pro. What to buy?

    +Model Name: MacBook Pro+
    +Processor Name: Intel Core 2 Duo+
    +Processor Speed: 2.8 GHz+
    +Total Number Of Cores: 2+
    +Memory: 4 GB+
    I am looking to buy more ram for my macbook, but I don't know what to look for. Do I have to buy 2x 4GB and get rid of my old ram or I can buy 2 x 2GB and use them all together?
    Also, same with HD. I need more HD as well. Can I install another harddrive as well?
    Message was edited by: Strato222

    There are only 2 slots for RAM. So, you'd need to replace one of the 2 GB sticks with a 4 GB stick for a total of 6 GB, or replace both for a total of 8 GB.
    Yes, you can replace the HDD with a larger one as well. There are instructions in the manual.

  • How do I add more RAM to my macbook pro 15 inch late 2008 model?

    I am wondering if I ma able to add more RAM to my 15 inch MacBook Pro from late 2008. It currently has 2 slots each with 2GB of RAM each. Am I able to change those out with higher amounts of RAM for each slot? Or is this thing maxed out and i'm out of luck? Any info would be much appreciated. Thanks!

    MacBook Pro: How to remove or install memory
    maushoo_32 wrote:
    Am I able to change those out with higher amounts of RAM for each slot?
    Mactracker

  • Will more RAM make my Macbook Pro run faster/smoother?

    I've been scowering the internet for information about the best way to improve the performance of my Macbook Pro. Not sure who to listen to.
    Here's my situation:
    I have MacKeeper, which I run to rid my pc of extra files and junk.
    I am running Parallels 9 and Windows 7 Ultimate (which I use daily for work purposes).
    I more often than not run many programs simultaneously (which I think is the reason for its lag).
    I am contemplating purchasing the max amount of RAM possible for my computer. Not sure what that is. 16GB, I think.
    Hardware Overview:
      Model Name:          MacBook Pro (13-inch, Mid 2009)
      Model Identifier:          MacBookPro5,5
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          5 GB
      Bus Speed:          1.07 GHz

    Get rid of MacKeeper if you wish to improve performance: How to Remove MacKeeper. You can install up to:
    Maximum Memory
    8.0 GB
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    You do not have sufficient memory to run OS X and Parallels w/Windows. A minimum of 8 GBs is required for decent performance.

  • Adding more RAM to Macbook Pro mid-2012

    Hi!
    I have a question about adding more RAM to my mid-2012 MacBook Pro (without Retina). I've been doing some video editing with Final Cut, and I'm using quite many apps on the daily basis. I have the standard configuration with 4GB of RAM (2x 2GB) but I guess I should upgrade it, shouldn't I?
    I had that idea in mind: buying extra 8GB RAM instead of one 2GB, so I'll end up with 10GB of RAM. If it won't be enough and I'll have some extra money, I will add another 8GB instead of 2GB, so I'll have 16GB.
    First question - is it worth it?
    Second question - can I add any RAMs supported by Macs? For example I'll leave one 2GB that I have already, and add 8GB made by, let's say, Kingston (I guess they are supported and they have good price in my country). Will this work fine? Does it make sense?

    Jerroslaw,
    since you’re running Mavericks, open up Activity Monitor while you’ve got your usual selection of apps running, select its Memory tab, and look at the Swap Used setting in the lower left. If it’s displaying “0 bytes” as the amount of swap used, then extra RAM won’t make a difference. Otherwise, to answer your first question, whether it’s worth it or not depends upon how frustrated you are running your usual selection of apps with 4 GB of RAM. It might be that the cost of replacement RAM modules outweighs your level of frustration — only you can make that determination of worth. I would recommend that if you do choose to purchase replacement RAM, that you get a pair of matching modules — either 2 × 4 GB = 8 GB, or 2 × 8 GB = 16 GB, to replace the pair that is currently installed.
    For your second question, you don’t have to use Apple-brand RAM, but you do have to use RAM with the same characteristics as your factory-installed RAM uses. Any worthwhile purveyor of RAM for Macs will let you easily locate modules that are compatible with your Mid 2012 MacBook Pro.

  • Adding more RAM to Macbook Pro

    I'm currently using a MacBook Pro 13" Mid 2012 model.
    At the moment, it has 4GB of RAM and I would like to upgrade it to 8GB of RAM. I will soon purchase DDR3 8GB of RAM and install it myself, however I have a little query, will 8GB of RAM drain my MacBook Pro battery life quicker? I wanted to have a stronger and faster computer.
    Thanks for your support,
    IxE TeMpTeD

    Welcome to the Apple Support Communities
    A faster computer consumes more energy than a slower computer. The battery life will be similar or the same when you install more memory, but of course, it will be less when you open more apps than the ones you had opened with 4 GB of memory, because 8 GB of memory allows you to open more heavy apps at the same time, consuming energy

  • How do I get more memory for my Macbook Pro Spring 2010 13-inch with 2.66GHz Intel Core 2 Duo?

    How do I get more memory for my Macbook Pro spring 2010 13-inch with 2.66GHz Intel Core 2 Duo. Apple says no memory currently available for that model. I have 4 GB memory and 3.99 used. Help!

    macette1976 wrote:
    Now I'm confused. This is the one Crucial told me to get:
    CT3309356 - 4GB DDR3 PC3-8500 Unbuffered NON-ECC 1.35V 512Meg x 64
    $45.99
    Also what do you mean that actual memory is 16GB but with Apple it's 8?
    When I go to the "About this Mac" it says Memory 4G 1067 MHz DDR3, then when I go to System Report it says
     Memory Slot
    Bank 0/ DIMM0 2G DDR3 1067 MHZ OK
    Bank 1/ DIMM0 2G DDR3 1067 MHZ OK
    Sorry I'm clueless. Just don't want to buy something that messes up my machine more than it already is.
    The Crucial site appears to have recommended the correct spec 4gB RAM stick for your model. Please note that you will need to remove the existing sticks of RAM to install new, so you will need 2x4gB to get to 8gB.
    When your model of computer was designed/built, it was tested with readily available 2x4gB (8gB). After release RAM retailers have tested it with higher amounts, and Apple didn't update their quoted specs.

  • RAM on a macbook pro 2012

    I have been looking at youtube videos regarding changing the RAM on my macbook pro.
    Is there a big difference from 4GB of RAM to 8GB ?
    My macbook is still very new and under full warrenty both with apple and the store where it was bought.
    If i was to change it to 8GB would i be best taking it to apple to do this to keep the warrenty in order and
    would i see a difference with the speed that my macbook pro works ?
    Thanks

    Trophy376 wrote:
    Is there a big difference from 4GB of RAM to 8GB ?
    Not if your uses are mostly email, web, and office in one app at a time. 4GB is fine for that.
    If you edit graphics and photos a lot, as a student or for a living, 8GB is more or less required. Or if you like to keep a lot open, like lots of browser tabs or lots of programs open at the same time.
    I was doing some high-res photo/video work the other day and I ran out of RAM very quickly on an 8GB Mac because of the number of apps I had open and the size of the documents. 16GB would have been great for that type of work.

  • 128 MB video ram on a macbook pro - enough to drive the new 30"?

    128 MB video ram on a macbook pro - enough to drive the new 30"?
    meaning, can it do this well???

    Even 16 MB VRAM would be enough to display a 2D picture on the 30".
    Depending on 3D usage you need much VRAM.
    Unless you are using a lot of the latest 3D games or Apples 3D pro apps (Motion/Shake or something like that) 128 MB should be fine.

  • How much ram support my macbook pro 8.1

    how much ram support my macbook pro 8.1 (late 2011) intel i7

    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • How do I create more room on my MacBook Pro so I can install Snow Leopard?  It says it needs 5GB and I have 4.something.

    How do I create more room on my MacBook Pro so I can install Snow Leopard?
    I've only got 4.something GB left and it says it needs 5 GB? 
    Which then begs the question, will I be able to do anything with the computer.
    I think I need to get some stuff off, but do not know where to look up what is taking up the most room.
    I have an extra hard drive.
    I have iDisk.
    I have a Time Machine, but it backs up one of my three Macs.
    Thanks.

    A utility like GrandPerspective is a good one for seeing what is taking up space on your hard drive.
    Video and photo files tend to take up a lot of room.

  • Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).

    Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).  The other slot is not working, I have only one slot that works. It is stated in this link http://support.apple.com/kb/HT1270#link1 , that the maximum memory is 8 GB where every slot slot has 4 Gb.  Is there any problem if i install only one 8 Gb ram in the working slot ?

    You should be able to do that.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    Understand that there is no guarantee it will work, but based on the above it should work for you.

  • Installing RAM, Mid-2012 Macbook Pro?

    Can a user or owner install RAM, Mid-2012 Macbook Pro?
    Is it a straightforward process? I've installed RAM into DT macs..and into a "Pismo" era powerbook.
    thank you

    "is a Spudger absolutely necessary to remove that plug,"
    Battery plug? No you can just  use your fingernails. I actually use a #3 Master Airscrew nylon propellor from the hobby shop, cut in half and wrapped w/ self fusing electrical tape. I have about 6 of them and half are pretty worn out.
    "are there any screws or other parts which might wish to fly out and away as a person opens the case and gets at this task?"
    No it's just the way the bottom fits on to the MBP. You fit it in the back (near the vent) first, then pull it forward and into place.
    The other thing is the screws are different lengths in the bottom so just keep track of where they belong. If you don't force anything you won't get into trouble because it's fairly obvious if you have the wrong screw in the wrong place. If you're doing a super pro job you would add a tiny dot of blue "Thread Loc" to the tip of the screw when you put it back.

  • Adding more RAM to Tiger

    My ibook has 512MB's of RAM. I am happy with this. However since next year I plan to return to school to get a Masters in Ministry, I may need more RAM. From 2001-2005 while I working on my undergrad I used a Performa 6360 which had 136MB's of RAM + RAM Doubler. I was able to run some 20 apps at one time (or more) without a major slowdown. I cannot do this with Tiger, and since I plan to get the OSX version of Dave to access other PC's on the network (since whatever is built int OSX pales in comparison to Dave). On my Performa 6360 Dave was a necessity, since the campus dumped using Macs in 2002. I remember my 1st year (2001-2002) I could access a number of Macs on the Appletalk network at the time. But after the Fall 2002 semester the mac got dumped. Some students still used Macs, but fewer and fewer used them in the 2003-2005 years.
    So my question is. Will maxing out my ibook to a gig of RAM although me to run some 20-30m apps at one time (like I could on the Performa) or was OSX Tiger just not designed for this?
    OSX Tiger is much better than OS 9.1, but not in all areas as OS 9.x and before do have their advantages over Tiger.
    Thanks,
    John

    My ibook has 512MB's of RAM. I am happy with this.
    However since next year I plan to return to school to
    get a Masters in Ministry, I may need more RAM. From
    2001-2005 while I working on my undergrad I used a
    Performa 6360 which had 136MB's of RAM + RAM Doubler.
    I was able to run some 20 apps at one time (or more)
    without a major slowdown. I cannot do this with
    Tiger, and since I plan to get the OSX version of
    Dave to access other PC's on the network (since
    whatever is built int OSX pales in comparison to
    Dave). On my Performa 6360 Dave was a necessity,
    since the campus dumped using Macs in 2002. I
    remember my 1st year (2001-2002) I could access a
    number of Macs on the Appletalk network at the time.
    But after the Fall 2002 semester the mac got dumped.
    Some students still used Macs, but fewer and fewer
    used them in the 2003-2005 years.
    So my question is. Will maxing out my ibook to a gig
    of RAM although me to run some 20-30m apps at one
    time (like I could on the Performa) or was OSX Tiger
    just not designed for this?
    OSX Tiger is much better than OS 9.1, but not in all
    areas as OS 9.x and before do have their advantages
    over Tiger.
    Actually, OS 9 does not have any advantage over OS X. You had 136 MB of ram plus RamDoubler, why do you think 512 MB of ram will be less adequate?
    RamDoubler merely did what OS X does as part of how it works. It did not give you more ram it just allocated more to the app up front while dropping background apps as low as possible. This is what OS X does.
    If you were running 20 - 30 apps with 136 MB of ram then they weren't ram hogs at all and it's very likely you can run them without adding more ram now.
    OS X handles virtual memory much better too. In the old days I could run 2-3 apps at a time, now I can run 10-12, and most of mine are major ram hogs like Photoshop.
    Kevin

Maybe you are looking for

  • BAPI_SALESORDER_CREATEFROMDAT2 - not working for multiple  BOM

    Hi - I am using BAPI_SALESORDER_CREATEFROMDAT2 function module to create sales order with multiple material. If more than one BOM materials are passed to the FM,this FM is giving error and not creating sales order. I have to pass multiple BOM to the

  • Sales Order - Source List Issue ( Help needed)

    Hi All... The user is trying to create a Sales order , but could not do it for a particular Customer and we are getting a error * Source not included in list despite Source List Requirement" and then we are getting an error Incorrect Index Structure

  • Problem installing Snow Leopard on an external drive

    Having just treated myself to a shiny new iMac, I have had a change around of my supplementary drives. I wanted to create a bootable external drive for backups and emergencies. I have a 500GB internal drive leftover from my G5 Powermac, which I have

  • How to fix problem with opening pdfs in Windows 8.1 with Adobe Reader XI?

    Every time I try to open a pdf on my new laptop with Adobe Reader XI, I get a message than either the file is not supported or its damaged. But it still opens fine on my old laptop with Windows 7. Any suggestions?@

  • Error when trying to start managed server from node manager

    I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the m