Adding object classes when creating ldap user in workflow

I'm creating ldap users in a workflow and when I assign the object classes in the workflow I get an object class violation. It seems that when I call check in view and when my break point stops in Update User the default object classes on the resource have been removed from the user.accounts[LDAP].objectClass attribute which I just set. Not sure what's going on here. Is there another way to assign more than just the default object classes to a new ldap user through the workflow? Thanks in advance.

Multiple things I can think of
1) put all the object classes you may be expecting with the user account in the resource configuration panel. LDAP is smart enough to assign the related object classes to the object based on the attributes assigned to the user.
2) Check if you have the object class in the schema of LDAP.

Similar Messages

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

Syntax error when creating a user-defined table type in SQL Server 2012

Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.

Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you

How to use DS 5.2 to create LDAP user ID and password to Login to Sun ONE I

Hi all,
I have just install Sun One Web server 6.1, Sun One Directory 5.2 and Sun One Instant Messaging 6.1 together on Win2K advance server. And I have successful launch Sun� ONE Instant Messenger.
But I can not know, how to create LDAP user ID and password to Login to Sun ONE Instant Messenger???
Could anyone help me to solve this problem?
I'm looking forward to receive your reply soon.
Thanks

Hi Tuo,
I think you better ask this in the forum where the ACS experts are, since this does not seem to be a problem on the ASA side.
hth
Herbert

Adding a Custom Object Class When You Create an LDAP Object

Hi all,
under which path i can configure below material ?
http://docs.sun.com/app/docs/doc/819-4438/gatkz?l=en&a=view
Cheer
ubd

Hi Shane,
I cannot search any
ou=basicuser,
do u know the DN when DA use to create default user ?
we create customize bulk add using perl script, the object class for our custormize bulk add are
top, iplanet-am-managed-person, iplanet-am-user-service, organizationalperson, inetadmin, sunimuser, person, inetOrgPerson, sunamauthaccountlockout, inetuser, inetlocalmailrecipient, sunpresenceuser, iplanetpreferences, ipuser, inetsubscriber, inetmailuser, UBDStaff, userpresenceprofile, sunucpreferences, icscalendarusercode}
these are the object class create by DA by default userpresenceprofile, sunucpreferences, iplanet-am-user-service, icscalendaruser, top, iplanet-am-managed-person, organizationalperson, inetadmin, sunimuser, person, sunamauthaccountlockout, inetuser, inetlocalmailrecipient, sunpresenceuser, iplanetpreferences, ipuser, inetorgperson, inetsubscriber, inetmailuserI need to customize the DA default user management so i can use the web console to add new user.
Cheer
ubd

Add object Classes before creating user??

Hi,
I have a requirement where in I need to add object classes to the user while provisioning to Sun Directory Server. How exactly should I be implementing my process task for the same. Should I add the object class after the Create task is finished or before the Create User task gets triggered?
Thanks,
Supreetha

Are you talking about adding custom object classes for the users? This would be a schema change and should be done prior to adding users since that would fail without having the correct schema in place. To add new object classes you need to either manually create the from the DSEE admin page or import the object definitions and attributes from a ldif file. Once that is all done, you can then configure the provisioning workflow and add the object classes during user creation so the system knows what object classes to associate with each user entry.

Error Extending the OAEntityImpl class when creating a BC4J Entity Object

I have created an EO based on an Oracle Apps table and extended the OAEntityDefImpl, OAEntityCache and OAEntityImpl classes as specified in the OA Framework Developers Guide when creating EO's via the BC4J wizard.
When I build my Business Components package I recive an error stating that the Impl class should be declared abstract.
Error(14,8): class oracle.apps.xxtpc.arinvoices.schema.TpcApInvoicesEO2Impl should be declared abstract; it does not define method setLastUpdateLogin(oracle.jbo.domain.Number) in class oracle.apps.fnd.framework.server.OAEntityImpl
When I modify this class to declare it abstract and then try to test (via the AM test function) the VO that I created based on this EO - I receive an oracle.jbo.RowCreateException: JBO-25017.
Do you think that this has anything to do with modifying the Impl class to make it abstract? I can create another VO against the same table by creating a SQL statement against it and not basing it off of the EO and this VO will run correctly via the AM tester.
Thanks,
Chris
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for TpcApInvoicesEO.
     at oracle.jbo.server.EntityDefImpl.createBlankInstance(EntityDefImpl.java:1054)
     at oracle.jbo.server.ViewRowImpl.createMissingEntities(ViewRowImpl.java:1532)
     at oracle.jbo.server.ViewRowImpl.init(ViewRowImpl.java:236)
     at oracle.jbo.server.ViewDefImpl.createBlankInstance(ViewDefImpl.java:1050)
     at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1007)
     at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2643)

The problem was that there were no audit columns in the table that I was querying.

Nu such object error when load the user from application

Hi..everybody
I'm new comer at Sun ONEDirectory Server
I've a problem when try to get the user from my application
I use ..getAttribute("cn=username");
always appear No Such Object, whereas I've created that user
Thanks

Hi,
The best way would be to first run an ldapsearch command on the directory server to check whether the user is present and then try to check it with your application.
You can use something like:
#ldapsearch -D "cn=Directory Manager" -w <password> -b "cn=username,o=users, dc=example,dc=com" "objectclass=*"
Cheers,

Directory Editor adding object classes to the Extensions Tab

I'm using Sun's Directory Editor web based product. Under the extensions tab lists the object classes you can add (obviously there are only a select few there). I would like to have shadowAccount available there. I have went through the installation and configuration guide but can't find how to do this. Just wondering if anyone knows how to add custom object classes to this tab.

I'm using Sun's Directory Editor web based product.
Under the extensions tab lists the object classes you
can add (obviously there are only a select few
there). I would like to have shadowAccount available
there. I have went through the installation and
configuration guide but can't find how to do this.
Just wondering if anyone knows how to add custom
object classes to this tab.this link has such an example:
http://blogs.sun.com/kevlar/entry/directory_editor_tips
Disclaimer: that's my feedback under the blog post. I'm trying to figure out how to use DE to maintain an extended schema that includes migrated NIS maps. The overall goal is to migrate from NIS to LDAP as a naming service AND create realistically easy method for day-to-day administration (constantly using the console is out of the question). I believe DE might provide a solution, if custom forms can be figured out. It's been very slow going.
Does anyone else have examples of modifying Directory Editor forms? Any help would be appreciated.
Thanks,
Ron

Assigning valuation class when creating Material

Hi
I want assign "3100 -Trading Goods valuation class" to my material which i am creating. in Tr.code MMH1
In the accounting1 view, under the current valuation section, there are no options at all to select valuation class.
please help me figure out how to get the 3100 option into my valuation class.
i will send u a screen shot of my problem,if u need..gimme u r email id.
i will assign points
thanks

hi
u need to assign val classes to act cat ref.That act cat ref assign to mat type .
then syst automatically will give option of val class when ur creating mat of that mat type.
Log gen->mat master-> basic settings-> def att of mat type
here u assign act cat ref to mat type.
MM-> val & act assign ment -> act detr wth wizard-> def val class
here u assign val classes to act cat ref.
ok
if its ok
assign points
nani

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

Call a java class when deleting a user

Hi,
I have identified the "Deprovision Form" as the form used when you want to delete a user. What I would to do is invoke a java class when you press on OK on the delete user page.
thanks in advance.

You can try to call the java class in a Field's Expansion block by putting the condition that
<cond>
<eq>
buttonValue
OK
<eq>
then call java....

How to avoid shut down BPELPM Server when creating a user?

Hi,
How to avoid shut down BPELPM Server when creating a JAZN user and after doing changes to user-properties.xml?
Thanks,
Jorge

this configuration is only supported on a midtier - there is a work around for a standalone install, nevertheless I would not recommend this for production ..
if this is NOT a production enviroment - I can try to get you the information .
/clemens

Runtime Error when creating SUS user

Hi All,
I started configuring SUS demo for my client, but when i created user with role "SAP_BC_BASIS_MONITORING" and "SAP_EC_SUS_ADMIN_VENDOR",
i am getting:
Runtime Errors: DBIF_RSQL_INVALID_REQUEST
Short text: Invalid call of database interface.
Do i need to configure anything before creating SUS users with this roles? Please help me?
Regards,
Ravi
Message was edited by:
Ravi Varma Nadimpalli

Hi
Which SUS Verson are you using ? Are you using SUS on the same system, where EBP is installed ?
You can create users and assign role to respective users in SUS for creating
Bids in Bidding starting form SUS. But you must replicate users from SUS to EBP.
Then only systems will identify each other while logging.
<u>Meanwhile, Please go thrugh the following pointers and SAP OSS Notes -></u>
Re: Clarifications on EBP-SUS and MM-SUS Scenario
Note 893714 - SUS30: Replication of bidding users from SUS to EBP
<u>Related Notes</u>
1060329 - Mandatory check of form of address during user creation SUS
895217 - SUS30: SUS not integrated with CUA currently
880735 - UME/SUS: error with administrational user creation
779658 - SRM40/SUS/BP: Error during change of employee
Note 778483 - SRM-SUS: Force a user to change password on initial logon
Note 1060329 - Mandatory check of form of address during user creation SUS
Note 946159 - SRM-SUS 4.0: Termination when users are created
Regards
- Atul

IdM: Automatically assign a privilege when create a user

Dear all,
I want automatically assign a privilege to a user, when a create this user. How I have to do this? Must I use dynamic group?
My idee is: All of our people need a account in the SAP portal, so I want to assign automatically the privilege PRIV:PORTAL:ONLY to the user.
Best regards,
Hans

Lot of options depending your requirements..
Dynamic group is one option but it requires small configuration effort.
If it's all users, maybe then an add event task for MX_PERSON where you grant the privilege? Takes 5 minutes to do.
Are there any exceptions? Do you have also non-dialog users in your IdM?
Any requirements for deprovsioning?
Where do you get the users? If it's SAP HCM-integration case and no users are created in the UI, then add the privilege in the job that moves the identities from staging Id Store to your master Id Store.
regards, Tero

Adding object classes when creating ldap user in workflow

Similar Messages

Maybe you are looking for