Adding Sales Office to FBL5N selection screen
Hi,
I need to add Sales Office to FBL5N. Now the DDF logical data base doesn't have the table KNVV. So is there any other option to add this field to FBL5N selection screen. Along with this I need to add custom columns as well to the report outcome, which I think BTE would help me.
Now instead of coping the report I would prefer to use some sort of config in the logical database if possible. Could any one can suggest me on this.
Many Thanks!
Somnath
In addition to that you have to run one std program also
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
Edited by: Sarang Gujrati on Feb 25, 2010 1:26 PM
Edited by: Sarang Gujrati on Feb 25, 2010 1:27 PM
Similar Messages
-
Adding a new field to selection screen -Effect on variant
Hello,
If we add a new (non obligatory) field to a slection screen, is there any impact on existing variants? Does SAP regenerate each variant when the screen change transport get applied? We had a DB lock jam situation in our PRD system for VARI table and the previous day some program changes with a added selection screen parameter ( a check box) had moved).
Regards,
Hari.Adding a field to the selection screen shouldn't affect existing variants (but the field will be blank for all variants). However, if there is a problem, you should be able to retrieve variants with program RSVARDOC_610.
Rob -
How to add profit center in fbl5n selection screen
how to add profit center in fbl5n selection screen
and
it is save to copy ddf from sap to cus
wll it affect anything elseWhen you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
Reward points if useful, get back in case of query...
Cheers!!! -
Add fields to Sales Order Mass Change selection screen
Hi,
Li & Fung customer customer needs to include following fields in the selection screen (Header Level) and the display output in Sales Order Mass Change (/AFS/MDC).
- VBKD-BSTKD_E
- VBKD-KDGRP
According to the SAP documentation we have done the configuration (Add details of custom fields) and implemented the BADI u2018/AFS/MDC_SELECT_CUSTOM_FIELDSu2019 with following methods.
- /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_HEADER
- /AFS/IF_EX_MDC_SEL_CUSTOM_FLDS~SELECT_CUSTOM_DATA
Data selection part works perfectly, but if we do not enter any values in any custom field in the selection screen, then the BADI is not working. The output displays the columns without any value for the custom field. However, for VBKD-KDGRP is added as a custom field in the selection, but it already exists in the output display by standard, and it does display the value.
The system should display all custom fields values even if we did not input them as part of the selection screen
I would like to know if we have missed something, or is it the expected behavior of this enhancement, which seems to be inconsistent. Also please advise if there are any other methods available to solve this issue.
thanks very Much.
NilminiHi Nilmini,
In My case, I have added custom fields to MDC change screen by using /AFS/MDC_CHANGE_CUSTOM_FIELDS but its not appearing in Grid list display. Would like to appreciate if you can Help me to achieve this.
Regards,
Jelli -
Sales office Mandatory at Initial Screen
Dear experts,
When we create a sales order in VA01 we need to maintain the sales office as Mandatory for certain sales area in the initial screen.
Incompletion log doesnu2019t help because it will be controlled only at Overview or Header or Item Screen level.
User exit is helpless at initial Screen.
Transaction Variant is possible but it will become mandatory for all sales area. I want to make this as mandatory only for certain sales area.
Pl suggest if some one come across the similar issue
BalaHi Raja,
Sorry for delay.
We have already maintained the OVAZ setting for all document types with respect to sales area. I have created a new Transaction Variant with input Parameters of ZXA1 document type, sales Area and sales office. I have also assigned the transaction Variant to ZXA1 document type in VOV8.
When I try to create a sales order with ZXA1 Document type it is not asking the sales office as Mandatory. But, after entering to overview screen I Pressed Back Button without entering any data. Now the variant is triggered and asking the sales office as Mandatory.
I donu2019t know why the Transaction Variant is working only if I come back from the overview screen to initial Screen in VA01.
If anyone come across Pl through some light
Bala -
Adding new parameter in ME28 selection screen
Hi All,
Did anyone know how to add in a new parameter(select-options) in ME28 selection screen?
I'm only able found one enhancement for this requirement.
In program
i create a new implementation for ENHANCEMENT-POINT RM06EF00_02 and write the
For eg:
PARAMETERS: p_matnr LIKE mara-matnr.
The new parameter displayed in ME28.
Anyhow, i'm not able to change the selection text from p_matnr to "Material Number" as there is no enhancement in INITIALIZATION for me to set the text dynamically. (i'm not able to change the text element via goto->text elements->selection texts as its standard sap).
Can someone please share if you've done this enhancement before?
Really appreciate your input and advise.
Thanks.
Regards,
Sham.Hi Sham,
I copy standard program of me28(RM06EF00) and implement the code.
Regards,
Quddus. -
SQ01 - Adding a field to the Selection Screen
Hi All,
I need to add a new Selection Criteria in the Selection Screen for an existing SQ01 Query.
Please advise the procedure to do the same.
Regards,
RRHi,
You have marked this thread as being answered, however, neither of your questions has been specifically addressed in the answers provided.
You can make any field from any infotype a selection field in SQ01. First, in Settings --> Settings uncheck the Graphical Query Painter. Enter the query and use the yellow arrows to the right to reach the Selection screen. Here, any field in your query can be checked to become a selection field. If the Graphical Query Painter is checked, go to your query. On the left you have your infotypes and fields. Checking the right hand box will make any field in your query a selection field.
For your second question, if you create your query in SQ01 in the "Global Area" it is transportable when saved and you should get a pop-up requesting the transport number. If you save a selection screen for that query with the starting designation "CUS&", it is also transportable when saved the pop-up should also appear.
Paul -
Adding Sales Offices to Mini Templates CRM Enhancement
Hi,
I have a problem in CRM with mini-templates.
In the standard, you can set predefined values for Sales or shipping or other things.
The problem is that in the organizational tab, we could enter the sales office, the division and the district and we don't have those fields in the standard mini template.
In the enhancement part of the custo, we could create BADI.
I create BADI for the structure FRG0140 by copying the things from the FRG0030.
So, a lot of class and and lot of tables where created.
Now, I'm able to save my own mini-template for Org part. (Data is correctly saved).
This mini template is assigned to the template.
The problem is that the system don't put the data into the fields. It seems that the system couldn't find my data for org assignment.
Any idea about how to do?
Thank you very much,
Luis.I have moved this question to CRM General:
[Mini-templates Enhancement (Technical);
Maybe I will get more luck.
I'll post the answer here too if I have it.
Br,
Luis. -
Adding Standard Text to the Selection Screen obtained using PARAMETERS
Hi all,
I have a report program which has the selection screen declared by the key word PARAMETERS.
Now I need to make the changes to this program such that a Text Editor appears on the Selection Screen and has a Standard text that should be displayed.
How can I do it?
I saw the screen number of the Selection Screen and went to screen painter and tried to add the Text Editot..but it did not let me dou2026.Why?
How should I add a standard text to a selection screen? The standard text should not be on top , but some where on the screen.
Regards,
Jessica SamHi Sam,
I dont want to create a new screen for this. On the existing screen whihc was built using PARAMETERS key word..i should insert a blokc of text whihc is mpre than 5-6 lines..how should i do it.
I navigated to Text Elements---->Selection Texts
it is now asking for Name and Text and i see in Name column the name of the parametsr that they used for Check box, radio button etc and in Text i see the text that is appearing on the screen
Now i am not sure what is should do next
My req is..i should display a block of standard text that doesnt change and whihc is of 4-6 lines?
how should i do it?
please also help me with what data declartions that i should do in parametrs key word in program?
Regards,
Jessica Sam -
Adding additional field 1 to selection screen of CATSSHOW (CADO)
Hello all,
We recently added one of the additional field's to show up on the data entry section when using
transaction CAT2...This is working fine and the data is entered into CATSDB.
When using CADO, one can display the addtional field 1 and sort by this field.
However, the users now want this additional field1 to be one of the selections when they
use report CATSSHOW (CADO).
Is there some type of way to configure SAP to have one of these additional fields show up
as a selection field on program CATSSHOW (CADO)? My searches in this forum and the web
have not shown me a solution yet.
Or do I have to create a 'Z' version of CATSSHOW like ZCATSSHOW and do this myself?
Thank-you,
Rick CrawfordEnhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Added field to dynamic selection screen does not work in FBL5N
hi,
we have added KNA1-KATR5 to the selection screen of FBL5N by using logical database DDF using "view CUS" but it does not work.
Our system is 6.0
is there any OSS note or program that we should add?
many thx.Refer This:
Additional field selections in FB03 -
Adding a new field to the selection screen of a LDB
Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
AjayHi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D -
Adding posting date in report mb52 in selection screen
Hi all,
We have a requirement of adding the posting date in the selection screen and based on which the report has to be displayed.
We have copied the standard program and added the posting date in the selection screen but could not find where to include the search based on posting date.
Could anyone guide to resolve this issue.
Thanks in advance,
NeelaHi,
I have added the posting date in selection screen and in the form data_selection i have also joined table bsim to extract values to the internal table t_mat.
But the results are not perfect. Should i do any changes elsewhere in d program.
Can anyone help me in resolving d issue.
Thanks in advance,
Neela. -
Sales area on selection screen
Hi friends,
i have a requirement,
on my selection screen i need a field called sales area which is a combination of
sales organization,
distribution channel,
division
how can i get all the 3 in one single field called sales area on my selection screen.
Regards
priyankaHi Priyanka,
In SAP ABAP if you wish to concatenate 2 or 3 strings together then you can use the following function module.
STRING_CONCATENATE_3
The above mentioned function module excepts 3 strings and concatenates them into 1. Please see the example given below.
REPORT ZEX_STRINGCON .
parameters: p_str1(100),
p_str2(100),
p_str3(100).
Data: d_str(500).
CALL FUNCTION 'STRING_CONCATENATE_3'
EXPORTING
STRING1 = p_str1
STRING2 = p_str2
STRING3 = p_str3
IMPORTING
STRING = d_str
EXCEPTIONS
TOO_SMALL = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Write: d_str.
If the input is as follows.
p_str1 = 'This'
p_str2 = 'Is'
p_str3 = 'ABAP'
The output would be as follows.
String Concatenate
THISISABAP
Hope it helps you
Regrds
Mansi -
Selection screen with Parameter - field name not coming when made mandatory
Hi Experts,
I have added a parameter in my selection screen which has other select options as well.
I used below code in wd_initi to add parameter
create data LR_LIFNR type LIFNR.
WD_THIS->M_HANDLER->ADD_PARAMETER_FIELD(
I_ID = 'LIFNR'
I_VALUE = LR_LIFNR
I_OBLIGATORY = ABAP_TRUE
I_READ_ONLY = L_READ_ONLY ).
I have a submit button in the selection screen, so when ever the value is empty in parameter for LIFNR, system throws an error *Enter selection in Field "" * but error message is unable to take the name of the parameter?
It is expected to give as Enter selection in Field "Vendor"
This throwing of error message is working fine for another select-options for PO which is also mandatory.
What could be the error?
Any clue is highly appreciated.
Regards,
AjayHi,
WDDOINIT the code is:
lt_range_table = wd_this->m_handle->create_range_table(
i_typename = 'ZRM_T_CV_END_DATE1' ).
wd_this->m_handle->add_selection_field(
i_id = 'ZRM_T_CV_END_DATE1'
i_description = 'Project End Date (MM.YYYY)'
it_result = lt_range_table
i_read_only = read_only ).
on submit the code is :
rt_prj_end = wd_this->m_handle->get_range_table_of_sel_field(
i_id = 'ZRM_T_CV_END_DATE1' ).
ASSIGN rt_prj_end->* TO <fs_prj_end>.
1.is the data element the same in both the methods u mentioned.i,e on WDDOINIT AND ON ACTION OF SUBMIT.
please check it once.
2.2does the data element LIFNR has field label assosciated with it.(check in domain).
3.check adding description to the field shown as below.
wd_this->m_handle->add_selection_field(
i_id = 'ZRM_T_CV_END_DATE1'
i_description = 'Project End Date (MM.YYYY)'
it_result = lt_range_table
i_read_only = read_only )
Try checking these 3 cases.
Priya
Maybe you are looking for
-
HT202651 Is java required for OS X 10.10?
Is java required for OS X 10.10?
-
How can i find a way to buy iphone6plus free since i couldnt affort it ?
Hi, i have a iphone5 now, but i would like to have a new model , iphone 6 plus but iam not to able to purchase it since its very expensive in my country so i thought that i can find a soulotion for my problem ..
-
500 internal server error aftet install ebs on win server 2003
after installed ebs r12.1.1 on windows server 2003 and open explorer that error shown 500 internal server error Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Pleas
-
[SOLVED] Segmentation Fault with Clementine
When I open the preferences (Ctrl+P) of Clementine it crashes with a segmentation fault. This is the backtrace: 18:53:58.858 WARN unknown libpng warning: iCCP: known incorrect sRGB profile 18:53:58.900 WARN unknown libpng warning: iCCP: known incorre
-
Is anyone running 10.3.9 successfully on an imac G5?
For multiple reasons, mainly the due to the woefully inadequate features of osx server 10.3.9 I've had to downgrade all out imac G5s to 10.3.9. Everything seems to be running nicely again but we have no audio on any of the imacs. I've seen a few post