Adding search Help - In the transaction MIGO for the Field WEMPF.
Hi All,
In the Transcation MIGO there is a field - Good Recipient ( WEMPF ) -this does not have any F4 help.
Now i need to create a search help for this field.
Can any one suggest me how to proceed.
I am thinking about -- creating a search help - and assigning it to a data elemet(WEMPF) of that field.
is this a right way. if so please guide me the steps to do.
Thanks in advance.
Guru
hie
to add a search help to a particular field u need to get the table name where that field is located. secondly go to se11 and enter an appropriate name for your search help, allocate the table where values are going to be taken as well as the search criteria. Afterwards to the table where WEMPF is and on the search help enter your custom search help. save and activate and you shud try MIGO once more and the field WEMPF should have an F4 help.
regards
Isaac Prince
Similar Messages
-
How to find the transaction code for the particular program or include
Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
MuralikrishnaHI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful -
SQL0964C The transaction log for the database is full
Hi,
i am planning to do QAS refresh from PRD system using Client export\import method. i have done export in PRD and the same has been moved to QAS then started imported.
DB Size:160gb
DB:DB2 9.7
os: windows 2008.
I facing SQL0964C The transaction log for the database is full issue while client import and regarding this i have raised incident to SAP then they replied to increase some parameter like(LOGPRIMARY,LOGSECOND,LOGFILSIZ) temporarily and revert them back after the import. Based on that i have increased from as below mentioned calculation.
the filesystem size of /db2/<SID>/log_dir should be greater than LOGFILSIZ*4*(Sum of LOGPRIMARY+LOGSECONDARY) KB
From:
Log file size (4KB) (LOGFILSIZ) = 60000
Number of primary log files (LOGPRIMARY) = 50
Number of secondary log files (LOGSECOND) = 100
Total drive space required: 33GB
To:
Log file size (4KB) (LOGFILSIZ) = 70000
Number of primary log files (LOGPRIMARY) = 60
Number of secondary log files (LOGSECOND) = 120
Total drive space required: 47GB
But still facing the same issue. Please help me to resolve the ASAP.
Last error TP log details:
3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
4 ETW000 1 entry from FAGLFLEX08 (210) deleted.
4 ETW000 1 entry for FAGLFLEX08 inserted (210*).
4 ETW675 end import of "R3TRTABUFAGLFLEX08".
3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
4 ETW000 [ dev trc,00000] Fri Jun 27 02:20:21 2014 -774509399 65811.628079
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN) 85 65811.628164
4 ETW000 [ dev trc,00000] &+ DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000 83 65811.628247
4 ETW000 [ dev trc,00000] &+ SQLSTATE=57011 row=1
4 ETW000 51 65811.628298
4 ETW000 [ dev trc,00000] &+
4 ETW000 67 65811.628365
4 ETW000 [ dev trc,00000] &+ DELETE FROM "FAGLFLEXA" WHERE "RCLNT" = ?
4 ETW000 62 65811.628427
4 ETW000 [ dev trc,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=8, reopt=0
4 ETW000 58 65811.628485
4 ETW000 [ dev trc,00000] &+
4 ETW000 53 65811.628538
4 ETW000 [ dev trc,00000] &+ Input SQLDA:
4 ETW000 52 65811.628590
4 ETW000 [ dev trc,00000] &+ 1 CT=WCHAR T=VARCHAR L=6 P=9 S=0
4 ETW000 49 65811.628639
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.628689
4 ETW000 [ dev trc,00000] &+ Input data:
4 ETW000 49 65811.628738
4 ETW000 [ dev trc,00000] &+ row 1: 1 WCHAR I=6 "210" 34 65811.628772
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.628823
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.628873
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END) 27 65811.628900
4 ETW000 [ dbtran ,00000] ***LOG BY4=>sql error -964 performing DEL on table FAGLFLEXA
4 ETW000 3428 65811.632328
4 ETW000 [ dbtran ,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000 46 65811.632374
4 ETW000 [ dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL' 59 65811.632433
4 ETW000 RSLT: {dbsl=99, tran=1}
4 ETW000 FHDR: {tab='FAGLFLEXA', fcode=194, mode=2, bpb=0, dbcnt=0, crsr=0,
4 ETW000 hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
4 ETW000 init:p=0000000000000000, init:#=0, wa:p=0X00000000020290C0, wa:#=10000}
4 ETW000 [ dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL' 126 65811.632559
4 ETW000 STMT: {stmt:#=0, bndfld:#=1, prop=0, distinct=0,
4 ETW000 fld:#=0, alias:p=0000000000000000, fupd:#=0, tab:#=1, where:#=2,
4 ETW000 groupby:#=0, having:#=0, order:#=0, primary=0, hint:#=0}
4 ETW000 CRSR: {tab='', id=0, hold=0, prop=0, max.in@0=1, fae:blk=0,
4 ETW000 con:id=0, con:vndr=7, val=2,
4 ETW000 key:#=3, xfer=0, xin:#=0, row:#=0, upto=0, wa:p=0X00000001421A3000}
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
4 ETW690 COMMIT "14208" "-1"
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN) 16208 65811.648767
4 ETW000 [ dev trc,00000] &+ DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000 75 65811.648842
4 ETW000 [ dev trc,00000] &+ SQLSTATE=57011 row=1
4 ETW000 52 65811.648894
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.648945
4 ETW000 [ dev trc,00000] &+ INSERT INTO DDLOG (SYSTEMID, TIMESTAMP, NBLENGTH, NOTEBOOK) VALUES ( ? , CHAR( CURRENT TIMESTAMP - CURRENT TIME
4 ETW000 50 65811.648995
4 ETW000 [ dev trc,00000] &+ ZONE ), ?, ? )
4 ETW000 49 65811.649044
4 ETW000 [ dev trc,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=15, reopt=0
4 ETW000 55 65811.649099
4 ETW000 [ dev trc,00000] &+
4 ETW000 49 65811.649148
4 ETW000 [ dev trc,00000] &+ Input SQLDA:
4 ETW000 50 65811.649198
4 ETW000 [ dev trc,00000] &+ 1 CT=WCHAR T=VARCHAR L=44 P=66 S=0
4 ETW000 47 65811.649245
4 ETW000 [ dev trc,00000] &+ 2 CT=SHORT T=SMALLINT L=2 P=2 S=0
4 ETW000 48 65811.649293
4 ETW000 [ dev trc,00000] &+ 3 CT=BINARY T=VARBINARY L=32000 P=32000 S=0
4 ETW000 47 65811.649340
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.649390
4 ETW000 [ dev trc,00000] &+ Input data:
4 ETW000 49 65811.649439
4 ETW000 [ dev trc,00000] &+ row 1: 1 WCHAR I=14 "R3trans" 32 65811.649471
4 ETW000 [ dev trc,00000] &+ 2 SHORT I=2 12744 32 65811.649503
4 ETW000 [ dev trc,00000] &+ 3 BINARY I=12744 00600306003200300030003900300033003300310031003300320036003400390000...
4 ETW000 64 65811.649567
4 ETW000 [ dev trc,00000] &+
4 ETW000 52 65811.649619
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.649670
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END) 28 65811.649698
4 ETW000 [ dbsyntsp,00000] ***LOG BY4=>sql error -964 performing SEL on table DDLOG 36 65811.649734
4 ETW000 [ dbsyntsp,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000 46 65811.649780
4 ETW000 [ dbsync ,00000] ***LOG BZY=>unexpected return code 2 calling ins_ddlog 37 65811.649817
4 ETW000 [ dev trc,00000] db_syflush (TRUE) failed 26 65811.649843
4 ETW000 [ dev trc,00000] db_con_commit received error 1024 in before-commit action, returning 8
4 ETW000 57 65811.649900
4 ETW000 [ dbeh.c ,00000] *** ERROR => missing return code handler 1974 65811.651874
4 ETW000 caller does not handle code 1024 from dblink#5[321]
4 ETW000 ==> calling sap_dext to abort transaction
2EETW000 sap_dext called with msgnr "900":
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20140627022021"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Regards,
RajeshHi Babu,
I believe you should have taken a restart of your system if log primary are changed. If so, then increase log primary to 120 and secondary to 80 provide size and space are enough.
Note 1293475 - DB6: Transaction Log Full
Note 1308895 - DB6: File System for Transaction Log is Full
Note: 495297 - DB6: Monitoring transaction log
Regards,
Divyanshu -
You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?
Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Required the transaction code for the user exit
Hi Abap Gurus,
i want to find out the *sap transaction code for which the user exit belongs to from the below code i am getting the enhancement name and the type.
i want to know the transaction code for exit EXIT_SAPLMEKO_002 and EXIT_SAPLFYTX_USER_001
data: begin of it_modsap occurs 0,
name type modsap-name,
typ type modsap-typ,
member type modsap-member,
end of it_modsap.
type-pools:slis.
data:wa_layout type slis_layout_alv.
data:it_sort type slis_t_sortinfo_alv.
data:wa_sort like line of it_sort.
parameters:p_exit type modsap-member.
select * from modsap into table it_modsap where member = p_exit.
read table it_modsap index 1.
select * from modsap into table it_modsap where name = it_modsap-name.
wa_layout-colwidth_optimize = 'X'.
wa_sort-fieldname = 'NAME'.
wa_sort-tabname = 'IT_MODSAP'.
wa_sort-up = 'X'.
append wa_sort to it_sort.
clear wa_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
i_structure_name = 'MODSAP'
is_layout = wa_layout
it_sort = it_sort
tables
t_outtab = it_modsap.HI
The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23' 'ME23N' 'ME31L' 'ME31' 'ME32L' 'ME32' 'ME33L' 'ME33' 'ME38' 'ME39' 'VL31N' 'VL32N' 'VL33N'.
This is basically used for tax calculation purposes.
The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
Also use user exit for your business scenario.
Br
Vijay V -
Search Help(F4....) for a FIELD in table
Hi,
In SE11 I created a SEARCH HELP.
And I assigned it to a field in a table.
GOTO>Search help->for field.Here i assigned that created search help name and COPY.
**But it is not reflecting in screens.
Any one suggest me what to do or any thing else i need to take care.
Thnkas in advance.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 kHi deepak,
This is the Search Help Process(F4) for a Particular Field.
Go to SE11.
Select Search Help Radio button : Any name with Z or Y.
Create.
Short Description : Any.
Selection Method : Table Name.
Dialog Type : Display Values immediately.
Search Help Parameter : Field Name (for which field ur doing in the table).
Exp : Tick it.
Lpos : 1 Just giving the position.
SAVE CHECK ACTIVATE.
Next Assign the Search Help to the table or field.
SE11.
Your Table Name : Change.
Search Help Button above the fields.
Search Help name : Your search help name.
Copy.
SAVE CHECK ACTIVATE.
Now go and check to the field by F4.
Thats it.
hope this helps you.
reward points for helpfull answers and close the thread if your question is solved.
regards,
venu. -
What's the transaction code for the acronym explainer?
I found this once but for the life of me can't find it again.
There's a transaction code for a utility that tells you what SAP acronyms/abbreviations stand for. Anyone care to enlighten me?Brilliant. STERM was what I was thinking of but SAPTERM seems a little more 'user-friendly' (although I use that term very loosely with anything SAP-related).
-
im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive. -
The transaction log for database 'speakasiaonline' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
What does it return?
SELECT log_reuse_wait_desc FROM sys.databases WHERE database_id=2
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Any body able to help me : The transaction log for database 'KDS' is full
Hi Experts,
I am facing the follwoing problem when i entered into the portal.
[NWMss][SQLServer JDBC Driver][SQLServer]The transaction log for database 'KDS' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases.
Exception id: 10:51_28/09/07_0006_3439451
See the details for the exception ID in the log file
Please give me a solution urgent.
Message was edited by:
Ramanan PanchabakesanAmeya,
The log file seems to be....[ i have bolded the warning number and bold+underline the error number].kindly see this
#1.5 #001320E973F2004900000281000010D400043B2BF18A5CFD#1190959829445#com.sap.engine.services.deploy##com.sap.engine.services.deploy######01eb74206d8811dc8114001320e973f2#SAPEngine_System_Thread[impl:5]_5##0#0#Warning#1#/System/Server#Plain###
Warning occurred on server <b>3439450</b> during startApp sap.com/cafruntimemonitoringear : Application sap.com/cafruntimemonitoringear has weak reference to application sap.com/com.sap.jdo and is starting it!#
#1.5 #001320E973F2004900000283000010D400043B2BF18A5DCF#1190959829445#com.sap.engine.services.deploy##com.sap.engine.services.deploy######01eb74206d8811dc8114001320e973f2#SAPEngine_System_Thread[impl:5]_5##0#0#Warning#1#/System/Server#Plain###
Warning occurred on server <b>3439450</b> during startApp sap.com/cafruntimemonitoringear : Application sap.com/cafruntimemonitoringear has weak reference to application sap.com/caf~km.proxies and is starting it!#
#1.5 #001320E973F2004900000285000010D400043B2BF18A5E85#1190959829445#com.sap.engine.services.deploy##com.sap.engine.services.deploy######01eb74206d8811dc8114001320e973f2#SAPEngine_System_Thread[impl:5]_5##0#0#Warning#1#/System/Server#Plain###
Warning occurred on server <b>3439450</b> during startApp sap.com/cafruntimemonitoringear : Application sap.com/cafruntimemonitoringear has weak reference to application sap.com/cafruntimeear and is starting it!#
#1.5 #001320E973F2004900000287000010D400043B2BF18A5F72#1190959829461#com.sap.engine.services.deploy##com.sap.engine.services.deploy######01eb74206d8811dc8114001320e973f2#SAPEngine_System_Thread[impl:5]_5##0#0#Warning#1#/System/Server#Plain###
Warning occurred on server <b>3439450</b> during startApp sap.com/cafruntimemonitoringear : Application sap.com/cafruntimemonitoringear has a weak reference to resource jmsfactory/TopicConnectionFactory with type javax.jms.TopicConnectionFactory but the resource is not available and the application may not work correctly!#
#1.5 #001320E973F2001100000002000010D400043B2BF18FC93A#1190959829805#com.sap.jms##com.sap.jms.LOCK_EXCEPTION######837a4dd06d8911dcbe35001320e973f2#SAPEngine_System_Thread[impl:5]_34##0#0#Warning#1#/System/Server#Java###Couldn't acquire Lock $service.jms_provider. Current JMS lock owner is server node with id = .#1#<i><b><u>3439451</u></b></i>#
#1.5 #001320E973F200490000028D000010D400043B2BF1A40473#1190959831134#com.sap.engine.services.jndi##com.sap.engine.services.jndi######01eb74206d8811dc8114001320e973f2#SAPEngine_System_Thread[impl:5]_5##0#0#Path##Java###Caught #1#com.sap.engine.services.jndi.persistent.exceptions.JNDIException: Error during s object serialization.
at com.sap.engine.services.jndi.implclient.ClientContext.serializeObject(ClientContext.java:3335)
at com.sap.engine.services.jndi.implclient.ClientContext.serializeDirObject(ClientContext.java:3224)
at com.sap.engine.services.jndi.implclient.ClientContext.rebind(ClientContext.java:1032)
at com.sap.engine.services.jndi.implclient.ClientContext.rebind(ClientContext.java:957)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebApplicationConfig.bind(WebApplicationConfig.java:455)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebApplicationConfig.parse(WebApplicationConfig.java:116)
at com.sap.engine.services.servlets_jsp.server.runtime.context.ApplicationContext.init(ApplicationContext.java:617)
at com.sap.engine.services.servlets_jsp.server.container.WebContainerHelper.createContext(WebContainerHelper.java:540)
at com.sap.engine.services.servlets_jsp.server.container.StartAction.prepareStart(StartAction.java:51)
at com.sap.engine.services.servlets_jsp.server.container.WebContainer.prepareStart(WebContainer.java:475)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.engine.services.jndi.persistent.exceptions.JNDIException: Error during s object serialization.
at com.sap.engine.services.jndi.persistent.RemoteSerializator.toByteArray(RemoteSerializator.java:55)
at com.sap.engine.services.jndi.implclient.ClientContext.serializeObject(ClientContext.java:3332)
... 24 more
Caused by: java.io.NotSerializableException: com.sap.engine.system.ORBProxy
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.sap.engine.services.jndi.persistent.RemoteSerializator.toByteArray(RemoteSerializator.java:48)
... 25 more -
Adding Search help to a field of standard transction
hi experts,
i m new to abap.
my pp consultant wants that in transaction MM03, for the field on selection screen (Material) one more search help should be added. and on pressing f4 it should be displayed there with other search options.
The search field is "(Document)-Number of the drawing that exists for this object".
Note: To see this field run transaction MM03, enter a material and press enter then we get a screen to choose a view. choose basic data2. In the block "design drawing" there is a field for "Document".
is it possible? if yes how much time it would take and to do it.
how should i go about it.
plz help.Hi ANNIE,
Go through the following Procedure to add a Search help to a field of standard Transaction
The Matchcode is replaced by search help from the version 4.6C.
I will tell u how create the search help.
Name of a search help
A search help is an object of the ABAP Dictionary with which input helps
(F4 helps) can be defined.
There are the following types of search helps:
o Elementary search helps implement a search path for determining the
possible entries.
o Collective search helps contain several elementary search helps. A
collective search help therefore provides several alternative search
paths for possible entries.
o Append search helps can be used to enhance collective search helps
delivered by SAP with customer-specific search paths without
requiring a modification.
The three components of the input help process described by a search
help are the outer interface, the online behavior and the method of data
Go to Tcode SE11. Select the search help radio button.
Give name as ztest and click create
There are two types of search help.
Once is elementary search help
& collective search help
Choose one.
Add the data element.
MatchCode is replaced by search helps.
To attach a search help to a field.
Use this code.
at selection-screen on value-request for source.
progname = sy-repid.
dynnum = sy-dynnr.
clear value_tab.
refresh value_tab.
Filling the Value_tab internal table by itab2 internal table.
loop at itab_desc.
write itab_desc-description to value_tab.
append value_tab.
endloop.
prog = sy-repid.
no = 1000.
clear tab.
refresh tab.
Building the Structure of the Seach Help.
tab-tabname = 'FMFCTRT'.
tab-fieldname = 'BESCHR'.
collect tab.
Function Used to provide Search Help.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BESCHR'
dynpprog = prog
dynpnr = no
dynprofield = 'SOURCE'
window_title = 'Function'
TABLES
value_tab = value_tab
field_tab = tab.
Regards
Sreeni -
Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?
Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please? -
How to clear the quantity field in the items line from the transaction MIGO
Dears.
I need that the field GOITEM-ERFMG from the transaction MIGO comes blank, but, this field have a default value.
I tried to clear this field in the BADI MB_MIGO_BADI, but, this 'clear' does not work.
Somebody knows, where I can insert an enhacement in the program SAPLMIGO to clear the field GOITEM-ERFMG, ever that the user add a new line?
Thanks and Regards.Check SAPNotes, there are some that have bug fixes for this issue
-
The transaction log for database 'SharePoint_Config' is full
Hi all ,
I am very new to sharepoint. when i tried to remove a wsp file from central administration i got the message like
The transaction log for database 'SharePoint_Config' is full. To find out why space in the log cannot
be reused, see the log_reuse_wait_desc column in sys.databases.
Can anybody help me to solve this please. I saw one solution in net like this but i don't know how to do this. Can anybody help me how to do these steps please.
1.
Take the configuration database offline and detach it
2.
Copy the current MDF to a new location (to be used as a way of recovering the database if needed)
3.
Put the database back on-line, reattach it and then put it within simple mode (from full), with an aim of this stopping the database from
increasing in size
4.
Shrink the database and recover log space
5.
Should the shrinking fail, we'd look at detaching the database, making a sideways copy of the log file to another database
6.
We would then reattach the database, which should generate a new log file
Thank youHi Soumya,
I don't have any dba resource. And it is not a lab environment. It's Corporate environment.
Thanks alot for ur quick reply.
I normally don't just come onto the threads and tell people that they need a consultant, but you might want to look at getting a consultant to help make sure that your SharePoint environment is health and can be restored in the event of a server failure.
Based on the problem that you have described it might not be recoverable, or at least it might not be as recoverable as you want it to be.
At the very least you'll want to watch this video of my session at TechEd 2014 which talks about backups and how to set them up.
http://channel9.msdn.com/events/TechEd/NorthAmerica/2014/DBI-B214#fbid=
Thank You,
Denny Cherry -
What is the transaction code for where used list
hi,
what is the transaction code for where used list and
how to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number.hi,
there is no transaction code for where-used-list..
its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
use tables <b>likp lips and mara</b> and use material number and document number in where condtion.
regards,
pankaj singh
<b>**** please mark all helpful answers</b>
Maybe you are looking for
-
"Unknown Error" When Trying to Add a Title (Never Happened Before)
I've been using iMovie HD with my Canon HD camcorder (HV20) for about 2 months without any problems. It's been flawless. I fired it up today for the first time in about 2-3 weeks (and a few Apple updates) and I'm getting "An Unknown Error Occurred. Y
-
Troubles with Windows 7 Enterprise and Web Dynpro for ABAP
Hello together, we've installed Windows 7 Enterprise and IE 8 and are using Web Dynpro for ABAP. Since this installation on one Client, it is not possible to use the WD application - the sites seems to be frozen! I know the fact, that SAP will suppor
-
App auto updates are not saving configuration data for these Apps.
I use Junos Pulse to connect to my work office on my iphone and my ipad air. I am having problems when this App does an Auto Update from the App Store, that I loose all of my configuration settings. I have co-workers that do not have this proble
-
Hi I am New to Bi here by craetimg a new routine from Standard Routine here i want 2 append some field in a structure called "RSMONITOR " in a standard program , they are declare a Struture in aform of tables in the form for eg form test1 TABLES
-
Clickable image doesn' t work in the table
Hi all, Our Visual Composer has been upgraded to sps12. And when I add an image to a form and assign it a hyperlink action, it does work well. But when I add an image column to a table and assign it the similar hyperlink action, it doesn't work. Does