Adding sequence in 9.0.2

I've followed all the directions for generating a sequence which worked fine in JDev 3.2, but now in JDev 9.0.2 I'm getting the error
JBO-25017: Error while creating a new entity row for DatasetMetadata.
java.lang.Long
Any ideas on what this problem is here?
Thanks
scott

If you were calling sequence.getData() and casting that to an Integer, that method in 902 returns Long. A new method getSequenceNumber is the method that should be used to get the value out of the sequence domain object.

Similar Messages

Problems adding sequences in Premiere elements 7

I have Premiere elements 7. One problem is that I cannot import all the film sequences I have in one folder on my computer at once. I have to import every sequence separarately. Then I can insert some scenes in the sceneline and the next ones I cannot. Very frustrating. Would appreciate any help or advice. Thanks. Fadel

Fadel,
Those are the Project settings. For AVCHD material, you will need to use the proper AVCHD Project Preset.
To emphasize what Steve said, the Project Preset MUST match the Source Footage, as close to 100%, as is possible. At this stage, the output is not an issue, and would not even be considered.* With the proper Preset for the Source Footage, editing will be as smooth, as is possible, with the least amount of issues.
When the Project is complete, THEN one will determine the output - but not until then.
As an example, taking your case, you have AVCHD footage, so would use an AVCHD Preset. When editing was complete, as you do not wish to produce to a BD (Blu-ray Disc), I would recommend this workflow:
Export/Share as PAL (your case), DV-AVI, and then create a New Project (this will be for authoring to DVD-Video), with the PAL DV Preset. Import that PAL DV-AVI into it, set any Chapter Markers, choose any Menus, and then author/burn to DVD-Video. [Do keep your original AVCHD Project, probably via the Archiver, in case you do later get a BD burner, and want to author a BD Project.]
Good luck, and wish that I could help with the German to Swiss translations.
Hunt
* The one exception with Source Material and Project Preset is when you do NOT have any Video, but only Still Images. Then, and only then, you would decide what your necessary output would be, You would then choose a Project Preset, that matches that output, and Scale your Still Images to match that. Edit and output to those specifications. Remember, this is ONLY when you have no Video to start with.

Journals-General (132) Report - GLRGNJ - Adding Sequence Name field

Hi
I want to add a sequence name field(Formula column) in the layout module for
the report GLRGNJ (Oracle GL module) but i can not see any output. I can see it
in the log file.
Can anyone suggest why i am unable to see the field in the report?
Thanks,
Faris

HI
add that fileds in the all locations where you need it like
in internal table declaration , write statement , select statement
these are the main areas where you have to add that 2 fileds

Adding sequence while loading.

I want to add sequence number while loading the data.
Does the sql-loader loads the data as per the record sequence in data file or it selects records randomly?
I am using DIRECT load method.
e.g. the data in data file is as follows
a|transaction
b|trans b
c|trans c
now i would like to add sequence number with each transaction so while loading will the data be loaded as a,b,c?
thanks in advance..

Pl see MOS Doc 258649.1 (Differences between Conventional and Direct path options of SQL*Loader) for an explanation.
Sequence numbers are typically generated in ascending order - it depends on the definition of the sequence
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/views.htm#sthref3092
HTH
Srini

Adding Sequence to pre-existing Encore project

I want to add a sequence to a pre-existing Encore project, though the dynamic link can only start a new project. Do I have to export it as a .mov file first, then import it into Encore?

This question has been asked by plenty of users. When you use Encore first by dynamic linking from Premiere, there's no reason to know that the reverse is built in. And it is not obvious as to where the command is located.

Problem adding sequences

My tables and columns are created okey, but the sequences wont work. It says that the name for the sequence is invalid or already used.
Im not quite sure how the sequences work either, maybe it should be put inside the create table syntax, or replace the pk maybe?
Here's my code
CREATE TABLE CUSTOMER(
ID NUMBER Primary Key,
NAME VARCHAR2(40),
ADDRESS VARCHAR2(40),
CONTACT VARCHAR2(40));
CREATE TABLE SUPPLIER(
ID NUMBER Primary Key,
NAME VARCHAR2(40),
ADDRESS VARCHAR2(40),
CONTACT VARCHAR2(40));
CREATE TABLE BOOK(
ISBN NUMBER Primary Key,
TITLE VARCHAR2(40),
IN_STOCK NUMBER,
PRICE NUMBER,
AUTHOR_ID NUMBER constraint fk1_book References AUTHOR(ID),
TYPE_ID NUMBER constraint fk2_book References TYPE_OF_BOOK(ID),
SUPPLIER_ID NUMBER constraint fk3_book References SUPPLIER(ID));
CREATE TABLE INVOICE(
INVOICE_NR NUMBER Primary Key,
INVOICE_DATE DATE,
PAYMENT_DATE DATE,
AMOUNT NUMBER,
CUSTOMER_ID NUMBER constraint fk1_invoice References CUSTOMER(ID));
CREATE TABLE ITEM_OF_INVOICE(
INVOICE_NR NUMBER,
ITEM_ID NUMBER,
QUANTITY NUMBER,
ISBN NUMBER constraint fk1_item_of_invoice References BOOK(ISBN),
constraint pk_item_of_invoice Primary Key (INVOICE_NR, ITEM_ID));
CREATE SEQUENCE AUTHOR
INCREMENT BY 1
START WITH 1;
CREATE SEQUENCE TYPE_OF_BOOK
INCREMENT BY 10
START WITH 10;
CREATE SEQUENCE SUPPLIER
INCREMENT BY 100
START WITH 100;
CREATE SEQUENCE INVOICE
INCREMENT BY 1
START WITH 1000001;
CREATE SEQUENE CUSTOMER
INCREMENT BY 1
START WITH 100001;Regards from Sweden

You are giving wrong command to create a sequence and hence the error is coming,
ORA-00922 missing or invalid option
Cause: An invalid option was specified in defining a column or storage clause. The valid option in specifying a column is NOT NULL to specify that the column cannot contain any NULL values. Only constraints may follow the datatype. Specifying a maximum length on a DATE or LONG datatype also causes this error.
Action: Correct the syntax. Remove the erroneous option or length specification from the column or storage specification
What happens when you issue,
CREATE sequence seq1;You should look at the link given by Pavan.
http://www.psoug.org/reference/sequences.html
This would be useful for you.
And also see these doc links for the understanding of Sequence,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6015.htm#i2067093
And this how to use its columns,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/pseudocolumns002.htm#i1009336
HTH
Aman....
Edited by: Aman.... on Oct 8, 2008 1:15 PM

Save Images adding sequence number before Extention

Hi
when i run script multiple file in one batch
i want to add image sequnece for that all file
For Example
File Name + 001 + extension (myfile001.jpg)
File Name + 002 + extension (myfile002.jpg)
Because I want to Create Droplet
So I dont want bridge batch rename process
If anything possible to run Droplet without open photoshop

If anything possible to run Droplet without open photoshop
It won’t as far as I can tell.

Sequence auto update

Sorta new to FCP but, love it.
1. I dragged a bunch of sequences full of editing into a new
sequence.
2. Then I make a few changes in the origional added
sequence.
3. Will my sequences that I just added into the main sequence
automatically update?
Im guessing yes and Im away from my computer to actually to do the check.
This would be so cool and yet I wish there was a way to automatically move the chapters since your sequences will grow or shrink.

You've opened Pandora's Box, my friend.
While nested sequences do normally update in your parent sequence without incident, there can be issues with (nested sequences) updating when rendering is involved.
To use an example, if you nested sequence is simply clips (like a compile edit for scene), you should not experience any issues with updating. However, if your nested sequence features any rendered compositing and/or filtering, issues have been known to creep up with nests updating in the parent sequence. Even things have simple as a re-rendered lower third have been known to cause hiccups.
Unfortunately, when this happens is not at all predictable, at least in my experience. And I'm a big fan of nests, I use them all the time.

CM25 Sequence Number Maintenance View

Dear guru ,
i enter sequence number operation in the specific view of CM25.
In the sequence number maintenance view the production orders are sorted in order of production order number.
I want that production orders are sorted in this view in order of sequence number operation.
How can i do this ?
Thanks in advance.

I assume that you want to display the sequence number of each order in the mid and lower graphic panel, is that ?? And be able to sort order based in this field ?
Try this
Customizing
Production Planning
Capacity Leveling - Transaction: OPD0 : Overall profile
Go to list Profile: SAPSFCI001
Goto Profile for list variant: SAPSFCD001
Check also the profile for evaluation;
Subprofile for displayed fields: SAPSFCF0
Subprofile for sort criteria: SAPSFCS0
make the required changes, adding Sequence as field
I would suggest to create a complete set of new Z profiles.
Regards

How to add sequence to ddl suuport

Hi Friends
The goldengate is not replicating the sequences. I saw the reference guide and it says adding the sequence parameter with the sequence name in the extract and replicat parameter would work.
It want to make sure whether i need to do something else on top of it or just adding sequence parameter would work?
Thank you

Hi
Thanks for replying.
We are doing a migration from oracle 10.2.0.4 to oracle 11.2.0.3 and we configured oracle goldengate setup (ogg v11.2.1.0.1). We were having duplication error and so the oracle support suggested us to disable the triggers and redo the initial load. We did that and the issue was solved. Now after doing the migration our application is now pointing to target database(11.2.0.3), but when are starting jobs on our new database we are getting constrain violation errors and later we figured out that it is due to the sequence.
Every single “IMAGE” table in Oracle has an extra column called xxx_ID. This column is used to store a unique number that mimics an IMAGE record number. This is needed in IMAGE/Transport to allow for record manipulation and access using record numbers instead of key values or following chains, something that is done in the application.
This xxxxxx_id is populated automatically by Oracle using an insert trigger that gets a unique value from a sequence. There is a sequence for each of the 1000 or so IMAGE tables in Oracle. When we tried to add a row in xxxx table, we got a unique constraint violation. The only column that has a unique constraint is xxxx_ID.
We checked the sequence xxxxxxx_SEQ and its next number is 4828930. I checked the table looking for the maximum value for xxxxx_ID and it is 4831661. It appears that the sequence is about 5000 records short of where it should be.
My understanding is that since the triggers where disabled and so the sequence values did not change and stayed at there original values. On top of it the sequence were not in the extract and replicat list.
I think if I add sequence to ddl support then no matter whether the triggers are enabled or disabled the sequence should be in sync with the source database sequence.
If not then we have to rebuild the sequences on target by taking script from source database before pointing the application to target database.
Thank you

Sequence tunnel error

Im having an intresting problem with sending out data from a sequence. Pls dont give me crap about using sequences cause this one is absolutely necessary for the hardware to work properly. Ok that said heres the problem. I have a sequence loop within a while loop. The while loop has a shift register on it used to remember a data value from one iteration to the next. The data value goes into the sequence struct where it is modified in the second frame and is then passed out through a tunnel in the same frame. Now the sequence completes the remaining frames 4 in total. Now when the data from the sequence should be passed back to the while loop, it has the proper data type (cluster with 2 I32 intergers within) but.... the data in the second I32 variabl
e has been modified. Actually its been decremented by 24. and if i enter the loop again it exits with another 24 decrement. Now this isnt the only variable i have leaving that sequence but its the only one that is changed when crossing the sequence border. All shift registers are properly inited. I am completely baffled. Im guessing that for some reason the latter frames have an effect on the tunnel value but i no idea why, nothing is connected to that tunnel in the later frames. Anyone got a clue whats wrong?
Using labview 6.1 on a Pent 400.

I reread your question, maybe you can try adding sequence locals so that the data is passed out of the last frame. Or create a
local and assign it in frame 2 and pass the local out of the sequence in frame 4.
Cheers
"Martin Riddle" wrote in message news:QrCWb.858$[email protected]..
> Sound like you may need to add a sequence local to pass data to the second frame?
>
> Cheers
>
> "JoeDoe" wrote in message news:[email protected]..
> > Im having an intresting problem with sending out data from a sequence.
> > Pls dont give me crap about using sequences cause this one is
> > absolutely necessary for the hardware to work properly. Ok that said
> > her
es the problem. I have a sequence loop within a while loop. The
> > while loop has a shift register on it used to remember a data value
> > from one iteration to the next. The data value goes into the sequence
> > struct where it is modified in the second frame and is then passed out
> > through a tunnel in the same frame. Now the sequence completes the
> > remaining frames 4 in total. Now when the data from the sequence
> > should be passed back to the while loop, it has the proper data type
> > (cluster with 2 I32 intergers within) but.... the data in the second
> > I32 variable has been modified. Actually its been decremented by 24.
> > and if i enter the loop again it exits with another 24 decrement. Now
> > this isnt the only variable i have leaving that sequence but its the
> > only one that is changed when crossing the sequence border. All shift
> > registers are properly inited. I am completely baffled. Im guessing
> > that for some reason the latter frames have an effect on th
e tunnel
> > value but i no idea why, nothing is connected to that tunnel in the
> > later frames. Anyone got a clue whats wrong?
> > Using labview 6.1 on a Pent 400.
>
>

How to export file with original filename number suffix, but with more digits

Is there a way to keep the original filename number suffix, but change the formatting of the number, adding leading zeros for instance?
When I import photos from my camera I like to rename them, and give them sequential numbers, e.g. "2015-01 Hamburg 1.cr2", "2015-01 Hamburg 2.cr2", "2015-01 Hamburg 10.cr2", .. "2015-01 Hamburg 134.cr2", and so on.
Normally when I export photos I like to keep the file names exacly as I imported them (except the extension) e.g. 2015-01 Hamburg 1.jpg, "2015-01 Hamburg 2.jpg", .. "2015-01 Hamburg 10.jpg", .. "2015-01 Hamburg 134.jpg".
But sometimes I would like to export them with leading zeros, typically when adding photos to a web site or blog where there are sort mechanisms that only support simple sort algorithms based on file names, meaning the sort order of my photos with their original file names would become "2015-01 Hamburg 1.jpg, "2015-01 Hamburg 10.jpg", .. "2015-01 Hamburg 134.jpg", "2015-01 Hamburg 2.jpg".
So I would like the file names to be "2015-01 Hamburg 001.jpg", "2015-01 Hamburg 002.jpg", "2015-01 Hamburg 010.jpg", "2015-01 Hamburg 134.jpg".
By keeping the original file number suffix I can easily go back to the original file whenever I need to, and the sort order would work even with simple sorting.
The export Filename Template Editor gives quite advanced support for numbering files when exporting, see attached screenshot. There's support for exporting files with custom file names, and adding sequence, total and image number with padding (up to 9999/####). But those add new numbers, they do not consider the original filename number suffix. If I use the "Image # (001)" for instance, my example above would export as "2015-01 Hamburg 001.jpg", "2015-01 Hamburg 002.jpg", "2015-01 Hamburg 003.jpg", "2015-01 Hamburg 004.jpg", if those were the four photos I wanted to export, making it hard for me to trace them back to the original photo.
I have found no way of adding such padding on the original file number.
Does anyone know if this is possible or have suggestions for a workaround?
It shouldn't be too hard for Adobe to support this I'd imagine.
export pattern rename files file_number filename_template_editor

I do not know if you can do what you explained above, but there is a workaround to this (and a way to avoid having to do it in the future):
In the Library module, make sure your images are sorted by Capture Date (this will put them in the right order, even with suffixes like 1, 13, etc.)
Select all images, and then Rename them, using a Custom text followed by a Sequence number. The Custom text in this case should be the original name (such as, 2015-01 Hamburg, as in your example). Make sure the Sequence number is formatted with enough zeroes to include all the numbers in your images.
In the future, when you rename images during Import, make sure you select the Sequence number format that will include all the needed zeroes, so you don't have to go through this again.

Best Solution for IDENTITY Skipping 1000

Is there a good solution/workaround for IDENTITY skipping 1000 values like below?
ID168
169
170
1161
1162
1163
Thanks.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

This is all perfectly normal. Microsoft added sequences in
SQL Server 2012, finally, i might add and changed the way identity keys are generated. Have a look here for
some explanation.
If you want to have the old behaviour, you can:
use trace flag 272 - this will cause a log record to be generated for each generated identity value. The performance of identity generation may be impacted by turning on this trace flag.
use a sequence generator with the NO CACHE setting (http://msdn.microsoft.com/en-us/library/ff878091.aspx)
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

CS5, IPTC core, only author is showing in content

Metadata>IPTC core>creator, job title......>apply. Only the creator s name is showing in content, (as author) not the other items. Any clue why?
Thanks

First of all, where I am: Bridge, I opened up a folder, clicking on the
metadata tab gives a dark gray panel with the thumbnails listed on the left,
What you call the metadata tab I think is in fact the Metadata workspace?
(To my own opinion the Metadata workspace is very useless, but that aside)
My purpose: to make sure that the person on the other end of the mail gets the
captions. I figured out a good part of it , but not all.
In preferences, all the options are checked, so basically I can "write"
anything i want, but I only need title and author.
The preferences for Bridge metadata gives you option to check or uncheck but
that is only to see the lines that you check are visible in the metadata
panel. If you have the option 'hide empty fields' also checked (by default
on) the fields that have no info in it will not show.
But the IPTC in the file info is still having all this fields written to it.
I found out that if I write those (description and author) in Photoshop
file\info, they appear simultaneously in Bridge in both the the lighter gray
panel to the left, in the white fiels with the pencils, AND next to the
thumbnails, in the dark gray panel.
Bridge just reflects the info you have filled in, only the main window of
the Metadata Workspace does show very little of the content and you are not
able to select what info you want to show next to the thumbs Hence my
'useless' qualification...)
The metadata panel itself however can be of great help for you. You can make
a template for the IPTC / file info. This can be done in both PS and Bridge.
For PS open File info and fill in the fields that you think will need the
same info for every file (your name address copyright etc ) and when done
click export.
For Bridge (where you can also open file info) you have the ability to use
the metadata panel. Top right of the panel is a small icon that provides you
a fly out menu. Here you can choose to create a template but also you can
choose to add a template (when having a template created).
This is a major time saver that let's you add the same info you want to add
to all your files in one go. Select the files you want to alter and choose
append metadata and click on the template you want to add.
Now the files need some time to save but all the data is there!
Having multiple files that need the same description/caption you only have
to select those files and in the editable fields in the metadata IPTC core
section you can write this once and they are written to all the selected
files when done.
Besides that Batch rename (tools/batch rename) let you create a really easy
to use naming convention with auto adding sequence number shot date and a
lot more options.
What is left for me to understand: if my data is embedded from file\info, and
to be more precise it should be file\info\save for web because it seems that a
different title in save for web prevails over file\info
Not sure I understand this, you mean the mobile SFW tab in file info? Or the
file after having used the save for web option to create a file for web??
I verify that the data is there, which means that I dont have to write
nothing anymore, so what is the purpose of the lighter gray panel with the
little pencils?
Those fields let you add custom info to the metadata if you should wish so.
Preferable you should fill in as much as possible in the IPTC using the
template.
Leaving you with only having to add a few fields with custom info that
changes per file/subject. Description, keywords, date created, City, state,
country are fields that can be read by many applications and also will be
used to search for files using phrases or keywords.
What is confusing, is that, and I rephrase the old question, if you write
creator in the IPTC core next to the little pencil, that will appear next to
the thmbnail in the dark gray panel, if the thumbnail is selected of course,
but the next item, job title will not appear, even if I click on apply at the
bottom of the pencils.
If this is still about the metadata workspace forget about it. If you fill
in that field or have filled it in using a template and it shows in the
metadata panel it is saved in there

No audio in mulit-camera editing

PLEASE can somebody help me?
I keep losing sound in CS4 multicam editing in two ways:
1) This has only happened once, I sync all my video/audio in a sequence, start a new 'multicam' sequence, sound works fine but as soon as I click Clip/multi-camera/enable the sound disappears. I HAVE CHECKED that the correct audio stream is selected in my original timeline however the sound wont play?! But if I Un-enable the multicam, the sound comes back
2) This happens a lot. As I'm editing in multi-camera editing after a while and a number of cuts/edits, the sound just stops at that edit onwards. So for instance I'm editing a 10 min piece with 20 plus cuts from one camera to another then at a certain point I make a cut to a camera and the sound stops from that point on.
Pleae can someone help, I cannot find any answers anywhere online.
Thanks
G

I too am having the sound problem. The audio just disappears after making several camera switching edits. If you hit "undo" the sound will come back at that point but if you once again try to make a camera switch, the sound will be gone again at that edit point forward. It doesn't matter which camera you select after that...the audio will be gone. This has happened to me on two projects. What I did to work around it was to place the same multicamera sequence on the timeline again following the point where the sound disappears. I then edit the added sequence so that it starts at the point where I lost the sound. You can now edit this sequence and select among cameras and the sound will stay. But this time consuming and I shouldn't have to do this. Is it related to the number of camera edits that you put in a sequence?

Adding sequence in 9.0.2

Similar Messages

Maybe you are looking for