Adding some fields to ztable.

Hi friends,
i want to add menge from mseg table and lbkum from mbew table into my ztable which has MANDT TEMPLATE ITEM PHASE
MATERIAL MFRNR these fields but at the appending it is giving error that Error in ALTER TABLE generation for table ZPSYS
can you please tell me how can i rectify this error?
Regards,
bikash

Hi in SE11 ,
Use menu as below.
UTILITY----
>DATABASE OBJECT......>DATBASE UTILITY......>ACITIVATE NAD ADJUST DATABSE.
then Click on YES
Press F3 and acivate your table.
Cheers,
Pravin

Similar Messages

While adding some fields to the exixting report

I am getting the following error while try to add some fields to the existing report.
Invaid page size.

Hi,
enable confine mode and expand the frames and then add fields .
--Basava.S

To add fields form ztable to VA01

Hi All,
      I need to add some fields from ZTABLE to transaction va01 and i want to store
data entered in that fields.
       So that dat should be saved in ztable or stadard table by doing Append structure .
       And wt code shall i write for saving that data and where it should be added.
Thanks in advance.
Aniket

HI,
Hi,
You can do this by implementing one screen exit and couple of usr-exit. For all of the exits given describing below you will need access key.
1. Field you want in VA01 line item, add them to table VBAP using append strucutre.
2. You can not show additional fields to the in VA01 where all the lines are display, instead you add the fields on "Additional data B" tab at line item level. To see the Additional data B screen, you can either double-click any line item and go to the very last tab OR use the menu path "Goto -> Item -> More functions -> Addition data B"
The screen for "Additional data B" is SAPMV45A 8459. Use transaction SE51 to implement this screen. Add these fields as a dictionary fields ( with reference to VBAP custom fields you have defined ).
3. To implement PBO logic of this screen, you will have to use include MV45AOZZ. This will require access key.
4. To implement PBI logic of this screen, you will have to use include MV45AIZZ. This will also require access key.
Please refer to following link for more information on "User-exit in sales document processing"
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
Regards
Sudheer

Regarding rental object-I want to add some fields in output list?

Hi,
I am creating Ze program of transaction REISROOC.I want to add some fields in the output list .
here logical database is used & for adding some fields i need to write Select query.
how n where should i add this query?
can anyone help me????
Thanks,
vaishali

Solved
Edited by: vaishali patil on Mar 2, 2009 1:32 PM

Adding custom fields to standard Asset Accounting ALV reports

Hello,
I have recently added some fields to the Asset Master table ANLU using the customizing include CI_ANLU. I have also added some fields using an append structure to ANLZ. I now need to have these fields available in the standard reports for Asset Accounting. One example is the report generated for transaction S_ALR_87011963. I need the new fields available in the 'Displayed Columns' list when clicking the Change Layout icon. Any suggestions?
Thanks,
JR

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Adding Include fields to "user fields"

Hi...
I made an Include adding some fields to PRPS...
Now I want these fields to show up in the CJ20N - > "User fields" Tab...
How should I proceed??
PS:
I've made a screen-exit, but I need the fields to show up in the Substitution Rules.
How can I do that??
Any solution would fit my need...
Thanks,
Eric
Edited by: Eric Shimabukuro on Mar 23, 2011 9:15 PM

I don't know how come this is not working for you. Just confirm the steps once again as following:
- Your UDF is USR_UDF_CUSTOMERID (let's assume)
- You have made an entry is the section ** of FormMetaData.xml like below:
*<Attribute name="USR_UDF_CUSTOMERID" label="global.label.customerid" displayComponentType="TextField" dataLength="30" map="USR_UDF_CUSTOMERID"/>*
- In addition to it you have also made an entry like following in section ** of the same xml:
*<AttributeReference editable="true" optional="false">USR_UDF_CUSTOMERID</AttributeReference>*
This should work perfectly.
Thanks
Sunny

Re :adding custom fields to standard transaction

Hi ..
I've added custom fields to vbap table..I have also
added these fields in the va02 screen.
Now whatever values I enter for the zfields(va02 ) must be saved in vbap table.
How do i do this?.
Should I write in MV45AIZZ .(PAI).
what are the steps i have to follow?.
Thanks and regards..
tharun venkat

zfield in the program means the corresponding field name u have given for the newly added field in the table.
IN the layout u might have added some field ad have given some name (I/O) field name.

Adding a New Field to Ztable...Missing in SM30

I added a new key field to a Z table. When I do an SM30, or the already created custom transaction to maintain te table the key field is not there.
I even did an SE14 and did an "adjust" to the Ztable...No luck the key field is not there. However, when I do an SE16 to view the table, I see the added key field, blank of course.
What step did I miss?
Thank-You

Hi,
You have to re-generate the Table maintenance..
Go to SE11..
Give the table name..Press change..
In the menu..UTILITIES -> TABLE MAINTENANCE GENERATOR..
Press change (pencil button)..
Press expert mode..Press select all..
Press enter.
It will re-generate the table maintenance..
Thanks,
Naren

Adding some new fields for display in SAP Query

I need to add some fields for display in SAP query 01 of infoset /SAPQUERY/AM01. So I have changed the infoset by checking the additional fields which is already in LDB. Then I created the query by copying the 01 of infoset /SAPQUERY/AM01 to Zusergroup with reference to the same infoset. In the newly created query, I am just checking the newly added field in Basic list. If I generate the program for this query, I get a error.
Pls let me know how should I rectify this.
Regards,
Jeyananth

Hi,
Before generating the query, adjust the query from the menu of SQ01
Thanks
Shiva

How to make some fields mandatory for a custom screen we have added

Hi All,
Please let me know how can I make some fields mandatory through coding in PBO for only some fields of a screen.
Say if I have 4 fields in my screen(module pool not selection screen) i want to make mandatory 2 fields based on some conditions how to do this? I tried using screen-group but this will make mandatory all the fields of that screen mandatory.
I want only specific fields based on condition in run time.
Regards
Mahesh

Hi Mahesh,
         Try this ..
Assign the same group to those fields , say GRP
       in PAI
         IF <CONDITION>
            Loop at screen.
               if screen-group1 = 'GRP'.
                  screen-required = '1'.
                  modify screen.
               endif.
             endloop.
          ENDIF.

Adding new fields in web ui for complaint transaction

hi all,
i am able to add new fields thru eewb but my question is how these fields will reflect in web ui
and where these values will be stored i.e in which table?
do we need to create any z tables if yes how ?
plz help me out
thanks
madhuri

HI,
When u add a new field through EEWB wizard, that field add in related table. Suppose u r adding a field for Complaint , for that u have to choose Business object for complaint.
After this step when u run wizard, not only this field will add in Complaint table but wizard also generate BADI, FM,some structures and data element and also some classes.
U can find all these related generated methods , structure etc from General Data of Task.
U dont need to create any Ztable, wizard take care itseld all data storage and handling.
Regards
Gaurav

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

Hi,
We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
We have tried the following methods but have not been able to achieve the same. Kindly help!
1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
Kindly help to understand where we are going wrong.
Thanks in advance,
Regards
Prasuna.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Error with Dump while adding Currency field in UI

Hello,
I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
Could some one point me a direction and see below :
Custom Entity with attributes
ZTSTOCK data element is type curr (Lenght 13, Dec 2)
Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
Error: Could not find attribute WAERS and also dump showing below:
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_WD_CONTEXT
ABAP Program           CL_WDR_CONTEXT_NODE_INFO======CP
Application Component BC-WD-ABA-RUN
Date and Time          21.05.2014 00:13:32
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
     terminated.
Any help please.
BR, Srihari

Yes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
Hope that explains it,
Michael

Adding some fields to ztable.

Similar Messages

Maybe you are looking for