Error with Dump while adding Currency field in UI

Hello,
I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
Could some one point me a direction and see below :
Custom Entity with attributes
ZTSTOCK data element is type curr (Lenght 13, Dec 2)
Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
Error: Could not find attribute WAERS and also dump showing below:
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_WD_CONTEXT
ABAP Program           CL_WDR_CONTEXT_NODE_INFO======CP
Application Component BC-WD-ABA-RUN
Date and Time          21.05.2014 00:13:32
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
     terminated.
Any help please.
BR, Srihari

Yes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
Hope that explains it,
Michael

Similar Messages

IMPORT_ALIGNMENT_MISMATCH Dump while Adding fields in MC02M_0ITM in RSA3.

Hi Experts,
   I need to add some Z custom fields in BW datasource 2LIS_02_ITM which we are doingby appending in structure MC02M_0ITM. I am activating structure and removing hide field check box also in RSA6 transaction. But when we are executing transaction RSA3 (Both Delta & Full load ) it is giving us IMPORT_ALIGNMENT_MISMATCH dump. we have removed all the queues from SMQ1 using program RMBWV302 before making changes. Please help me out in this. Following are dump details:-
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          07/14/2010 05:23:40
Short text
     Error when importing object "MC02M_0ITM_TAB".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCEX" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
      not caught in
     procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
   Since the caller of the procedure could not have anticipated that
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC02M_0ITM_TAB", the structure did not matc
structure of the target object. The error occurred in component
no. 40.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
Please provide me some input about how to correct the same. Also what went wrong while adding new fields..
Thanks
Ankur Sharma

All modified fields should be in new append structure not in any old append structure sue to new field need new space allocation.

Error while adding user fields to user table using vb6.0

Hi,
I am adding a user tables using vb6.0 using DIAPI.
I am able to add the user table successfully.
I am getting the following error when i am adding the fields to the table.
"The metadata object for this object cannot be updated, since it's ref count is bigger than 0."
My code is as follows:
    oUserFieldsMD.TableName = TABLE_NAME_ITEM_LOCN
    oUserFieldsMD.Name = vTableFields(0, lCount)
    oUserFieldsMD.Description = vTableFields(1, lCount)
    oUserFieldsMD.Type = vTableFields(2, lCount)
    oUserFieldsMD.EditSize = CLng(vTableFields(3,lCount))
    lRetCode = oUserFieldsMD.Add
This error does not come up when i try to add the field to my table using the vb sample provided by SAP.
Your help will me much appreciated.
Thanks.

Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing

Dump while adding a shopping cart in work area in Carryout Sourcing

Hi Experts,
We are getting dump while adding a shopping cart to the work area in Carryout Sourcing.
We want to replicate the Purchase Requisition from R/3 to SRM. And SC contains the limit item with free text service.
The dump details are as follows :
The exception 'CX_BBP_PD_ABORT' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLBBP_PDH' has to be
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Buffer table not up to date
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
    "SAPLBBP_PDH" or "LBBP_PDHU08"
    "BBP_PD_ABORT"
Information on where terminated
    Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT".
    The main program was "SAPLBBP_SOCO_UI_ITS ".
    In the source code you have the termination point in line 73
    of the (Include) program "LBBP_PDHU08".
READ TABLE lt_callstack INTO ls_callstack2 INDEX 4.
CONCATENATE   '/' ls_callstack2-eventtype
                ls_callstack2-eventname ls_callstack2-progname
                INTO lv_msgarg3 SEPARATED BY space.
CALL FUNCTION 'BBP_ALERT_INTERNAL_OT'
    EXPORTING
      msgid   = gc_msgid_bbp_pd
      msgno   = 047
      msgarg1 = lv_msgarg1
      msgarg2 = lv_msgarg2
      msgarg3 = lv_msgarg3.
MESSAGE ID gc_msgid_bbp_pd TYPE c_msgty_i NUMBER iv_msg_no
          WITH ls_callstack1-eventtype
               ls_callstack1-eventname
               ls_callstack1-progname.
rollback work.
get the messages from the application log
TRY.
      CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'
        TABLES
        e_messages = lt_messages.
    CATCH cx_bbp_pd_abort.
      REFRESH lt_messages.
ENDTRY.
RAISE EXCEPTION TYPE cx_bbp_pd_abort EXPORTING
      worked_on_document = lv_guid
      t100_msgid = gc_msgid_bbp_pd
      t100_msgno = iv_msg_no
      t_appl_log_messages = lt_messages.
ENDFUNCTION.
Could you please help me on this, how to rectify the dump ?
Thank you very much in advance.

Hello,
I have seen this dump many times because the ERP version defined in table BBP_BACKEND_DEST was not correct.
Please, check the following note related to this configuration:
1230789 - Dump: BBPSOCO01 at include LBBP_PDH_TEOF0B
Kind regards,
Ricardo

SRM Create Confirmation - Short Dump while adding Approver

Dear Experts.
Currently I am facing following issue.
Issue:
In SRM “Create Confirmation” Screen, when user click on check button and after that if user tries to add approver in approval tab then it is going to short dump. Please find the short dump info:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_OS_OBJECT_NOT_FOUND
ABAP Program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Application Component SRM-EBP-WFL
I had analyzed this issue and following points are my findings.
We have written code in BBP_DOC_CHECK_BADI to check the approver is added or not in approval tab. For this purpose we are using METHOD lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info (Here lo_conf_adv is object of interface /sapsrm/if_pdo_bo_conf_adv) and the instance of lo_conf_adv is getting from METHOD /sapsrm/cl_pdo_fact_conf_adv=>get_buffered_instance By pasing Doc GUID.
As per my analysis, the above code only causing the short dump while adding the approver in aproval tab. More importantly the CHECK BADI (BBP_DOC_CHECK_BADI) is not triggered while adding the approver.
If I comment this code (which is mentioned in point 1), then the application is not giving any short dump and adding approver successfully.
I tried to find SAP notes but there are no SAP notes related to this issue. Also, I tried to find alternate METHOD to replace lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info but I have not got relevant method. Please let me know if there is any solution for this issue.
Thanks & Regards,
Sasidhar V

Hi Ritesh,
Thanks for the fast response.
We are using Process Controlled Workflow. In Doc Check BADI, we are checking the respective approver is added or not in approval tab in "Create Confirmation" Screen. While creating confirmation, when user click on "CHECK" button and If respective approver is not added then throwing error message.
We are using Method "GET_PROCESS_INFO" to get approval information only. when this method is triggered in Check BADI then it is doing respective validations and displaying messages. After that when we try to add approver then the system trying to read entry from table "/SAPSRM/D_WF_003" by passing OID to LEVEL_GUID. But there is no entry in this table and that's why it is giving short dump.
Can you please let me know why it is reading entry in that table and why entry is not exist.
FYI, If I don't use method "GET_PROCESS_INFO" in check BADI then respective code where short dump happening is not triggering (System is not trying to read entry from /SAPSRM/D_WF_003 table) and so it is not giving short dump.
Thanks & Regards,
Sasidhar V.

Error (Short Dump) while posting any Material document

Hello All Experts,
I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
Short text of error message:
Document number 1000 5000000000 2009 was already assigned
Earlier, I had posted some material documents using the same transactions.
Kindly help
Regards,
Atul

Hi Atul,
Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
Hope it can solve your issue.
Cheers

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

Error while adding Parameter Field to CrossTab report in CR 2008

Hello Experts,
I'm getting an error - "Not supported" while I'm trying to add a paremeter to the Crosstab report. It is a simple report with no further complications.
Is there any special way to add a parameter field to Crosstab? Any help appreciated.
TIA
arjun

Hi,
What version of Crystal Report are you using?
Kindly refer SAP Note 1376117 & 1454192 and verify if you are on the approriate patch.
Regards,
Nakul

EEWB Enhancement Error while adding new field

Hello Experts ,
The requirement is to add the attachment feild in the support desk message screen (CRMD_ORDER) in the Fast track tab , although in the transaction tab already the document option is available for attachments the end user's want it in intial screen.
I have tried this using EASY ENHANCEMENT WORKBENCH - EEWB as per the suggestions given by experts in SDN,now i face a problem in EEWB .
I have created a object and extention in EEWB under a project,the it took me to the wizard automatically ,i followed up the notes in wizard to ADD_NEW_FIELDS and after it is completed, it shows a ERROR message as "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems." What does this Error Mean?Should i have to follow any system settings for this?
Note : I have made the system settings in EEWC -System Data Maintenence before enhancement.
Has any one worked with EEWB to ADD new fields,if so then please give me a solution to solve this problem.
Thanks & Regards,
Mohana Priya

Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj

Issue with Webparts while adding in Project Site

Hi
I am getting an error while adding web parts in project site page 2010. Below the steps
Open project site --> site actions --> edit page --> click on Add webpart --> ProjectWebApp --> Project fields --> Add
Please try and let me know is this possible or not
Regards
Santosh

Santosh,
The Project Fields webpart is ties to the PWA context, and cannot be added to Project Site.
There used to be a solution starter called Project Workspace Custom Fields webpart. You might want find and use that
An alternative is to develop your own SSRS report and display it in webpart..
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Error Code "-5002" While adding a Goods Issue Document

Hi,
While adding a goods issue document for only a specific combination of items I get "Internal Error (-5002) occured" message.
The scenario is i am adding 5 rows with following specification
Row1- Serial Managed Item
Row2- Batch Managed Item
Row3- Managed by none
Row4- Batch Managed Item
Row5- Serial Managed Item

Hi I had the same Issue,
What my problem solved was setting the baseline number for each serial and batch number on each specific line to the line number of that specific line.
like this:
doc.Lines.SerialNumbers.SetCurrentLine(doc.Lines.SerialNumbers.Count - 1);
doc.Lines.SerialNumbers.InternalSerialNumber = 2;
doc.Lines.SerialNumbers.BaseLineNumber = doc.Lines.SerialNumbers.Count - 1;
Regards

Error with Folio Builder - Adding Article

I have downloaded the latest Folio update and am using 12.3.3 with CS5.5
When I try to upload an article to my folio, I get the error message - An error has occured while updating article layouts. the InDesign file cannot be found
How do I fix this ??
Adding open InDesign article and Importing both do not work

Unless you have a specific reason for using an older viewer version, use the most current version.
Use an older viewer (such as v20) if you need to publish folios for an older custom viewer app that you've submitted to the app store but haven't updated.
For example, let's suppose that you have a v21 viewer in the Apple App store, and you want to publish a new folio. If you publish a v23 folio, your customers will get a "Please update your app" error message when they try to download it. But if you publish a v20 or v21 folio, your customers can download it just fine.

Error while adding custom fields in ERP quotation

I am trying to add custom fields to ERP quotation. So picked up ERP_H and added view BTCUSTOMER_H/CustomerH to its views. I have added the relevant custom fields to BTCUSTOMER_H/CustomerH. Now when I try displaying this, I get the following error..
Context generation failed in view BTCUSTOMER_H/CustomerH of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Initialization of view BTCUSTOMER_H/CustomerH of UI Component ERP_H failed
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Cannot display view ERP_H/HeaderOverviewpage of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Window ERP_H/MainWindow of UI Component ERP_H cannot be displayed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BTCUSTOMER_H/CustomerH in component ERP_H could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
I have no prior experiance in UI development. Could someone explain me this error and how to fix this?
Regards,
Amar.

closing this unresolved

ERROR while adding summary field in group footer

Hi all,
i am using CR Server XI R2
i am trying to a subtotal in a group header using the code below
fieldobjCls = new CrystalDecisions.ReportAppServer.ReportDefModel.FieldObjectClass();
            fieldobjCls.Kind = CrystalDecisions.ReportAppServer.ReportDefModel.CrReportObjectKindEnum.crReportObjectKindField;
            fieldobjCls.FieldValueType = CrFieldValueTypeEnum.crFieldValueTypeInt32sField;
                   fieldobjCls.Name = "Count";
            fieldobjCls.DataSource = "Count({CSP_PROCESS_REPORT.userid})";
                  fieldobjCls.Left = 1000;
            fieldobjCls.Top = 700;
            fieldobjCls.Width = 1000;
            fieldobjCls.Height = 300;
            boSection = rcDoc.ReportDefinition.get_GroupHeaderArea(0).Sections[0];
            rcDoc.ReportDefController.ReportObjectController.Add(fieldobjCls, boSection, -1);
as a result i am getting the error as
Cannot find the section in the group area pair of the summary field.
how to solve
Padmanaban V

Try adding the summary field in the Report Designer first, then do the same steps in code. If it doesn't work in the deisgner it won't work in code.

Error while adding custom fields using EEWB.

Hi
While trying to add custom fields using the transaction EEWB i got an error message
'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
Thanks
sureshpaul

closing this unresolved

Error with Dump while adding Currency field in UI

Similar Messages

Maybe you are looking for