Adding substitution field in FI

Hi
How to add a field for FI substitution.
Regards
S.Radhakrishnan

Hi,
You can go to SM30, enter VWTYGB01 view, and maintain the 'Exclude' flag for the relevant field. Switching it off makes the field potentially substitutable.
Regards,
Eli

Similar Messages

Adding Include fields to "user fields"

Hi...
I made an Include adding some fields to PRPS...
Now I want these fields to show up in the CJ20N - > "User fields" Tab...
How should I proceed??
PS:
I've made a screen-exit, but I need the fields to show up in the Substitution Rules.
How can I do that??
Any solution would fit my need...
Thanks,
Eric
Edited by: Eric Shimabukuro on Mar 23, 2011 9:15 PM

I don't know how come this is not working for you. Just confirm the steps once again as following:
- Your UDF is USR_UDF_CUSTOMERID (let's assume)
- You have made an entry is the section ** of FormMetaData.xml like below:
*<Attribute name="USR_UDF_CUSTOMERID" label="global.label.customerid" displayComponentType="TextField" dataLength="30" map="USR_UDF_CUSTOMERID"/>*
- In addition to it you have also made an entry like following in section ** of the same xml:
*<AttributeReference editable="true" optional="false">USR_UDF_CUSTOMERID</AttributeReference>*
This should work perfectly.
Thanks
Sunny

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new field to data source -can not see them

Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.

Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini

Added new field to ALV but not displaying the ouput

Hi guys,
I'm adding one more column to be displayed on an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE eina-matnr,
extwg LIKE mara-extw,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
maktx LIKE makt-maktx,
lifnr LIKE eina-lifnr,
wglif LIKE eina-wglif,
<span style="color:red">idnlf like eina-idnlf,          " <----
new field</span>
name1 LIKE lfa1-name1,
profl LIKE mara-profl,
END OF itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = sy-cprog
      i_internal_tabname     = 'ITAB'
      i_client_never_display = ''
      i_inclname             = sy-cprog
     i_bypassing_buffer     = 'X'
    CHANGING
      ct_fieldcat            = t_cat
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
I've added in a new field inside the ITAB internal table, but it wouldn't appear in the t_cat, only all the old fields will appear. What have i done wrong?

Hi
Facing similar kind of issue.. added one field to the existing internal table. This is not getting populted by the field catalog merge FM. Tried with the suggested solution also of running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in..
But the newly added field is not getting populated. Any suggestions would be of great help.
Regards,
sridevi S

Adding new field to Remote Cube

Hello,
We have an existing remote cube that we are trying to add a new field to in 7.0. I've already added the field to the datasource, unhidden it, and tested it in RSA3. Now i'm trying to bring it into BW and add it to the remote cube. I right clicked on the source system under the data target and chose Replicate Metadata however the new field does not show up anywhere. What am i doing wrong? Does a remote cube work differently? How do i get my new field over from R3?
Regards,
TMS

That's the problem. The R3 field does not show up in the datasource in BW so it can be moved over to the transfer structure. As you know when you replicate metadata, the new datasource fields appear and can be mapped into the transfer structure. That is not the case for this remote cube. The new field is not there.

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

Hi,
We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
We have tried the following methods but have not been able to achieve the same. Kindly help!
1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
Kindly help to understand where we are going wrong.
Thanks in advance,
Regards
Prasuna.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Adding Summary Fields

Good Morning Everyone,
We would like to add summary Fields.
1)
Double click on the Data Model icon on the Object Navigator
Click on the Summary Column tool on the Data Model Editor's left hand toolbar
Double Click on CS_1
and so on
2)use SUM at Report Wizard :
After researches, we founded Creating summary / formula columns in data model does not show them in paper layout. We learnt the report wizard, and choose to display the summary / formula column in one of the steps.
Following Report Wizard and will see SUM option;
http://nycapex.webs.com/apps/photos/photo?photoid=95360469
We have hard time in both ways.
If you have experience in Adding Summary Fields, please share with us.
Thank in advance,
NY
Edited by: New Yorker on Aug 17, 2010 7:44 AM

Your screen shot shows that you have nothing selected as a summary. So, there is nothing to display in the layout. What is your exact problem? The available fields don't look like you can SUM them, so the option is not available.
we founded Creating summary / formula columns in data model does not show them in paper layoutIf you add them later on, you can manually add them in the layout.
Edited by: InoL on Aug 18, 2010 1:53 PM

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Error while adding user fields to user table using vb6.0

Hi,
I am adding a user tables using vb6.0 using DIAPI.
I am able to add the user table successfully.
I am getting the following error when i am adding the fields to the table.
"The metadata object for this object cannot be updated, since it's ref count is bigger than 0."
My code is as follows:
    oUserFieldsMD.TableName = TABLE_NAME_ITEM_LOCN
    oUserFieldsMD.Name = vTableFields(0, lCount)
    oUserFieldsMD.Description = vTableFields(1, lCount)
    oUserFieldsMD.Type = vTableFields(2, lCount)
    oUserFieldsMD.EditSize = CLng(vTableFields(3,lCount))
    lRetCode = oUserFieldsMD.Add
This error does not come up when i try to add the field to my table using the vb sample provided by SAP.
Your help will me much appreciated.
Thanks.

Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing

Adding a field to infotype 554 with PM01

I was adding this field to infotype 0554 via PM01 and while I was generating the objects I got this error.
Structure HCMT_BSP_PA_US_R0554 does not exist
Message no. PG361
Diagnosis
The structure HCMT_BSP_PA_US_R0554 does not exist in the Dictionary.
Procedure
Please create the structure before executing any further actions.
Any ideas how to solve this?
Thanks,

yes it is public sector.
I went to PE03 and found molga 10 assigned to US.
not sure how to check for PMI

Error with Dump while adding Currency field in UI

Hello,
I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
Could some one point me a direction and see below :
Custom Entity with attributes
ZTSTOCK data element is type curr (Lenght 13, Dec 2)
Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
Error: Could not find attribute WAERS and also dump showing below:
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_WD_CONTEXT
ABAP Program           CL_WDR_CONTEXT_NODE_INFO======CP
Application Component BC-WD-ABA-RUN
Date and Time          21.05.2014 00:13:32
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
     terminated.
Any help please.
BR, Srihari

Yes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
Hope that explains it,
Michael

Adding Z field in Opportunity search and result view BT111S_OPPT/Search

Hi,
I have been searching this forum on adding Z fields in search and result view but couldnt find the precise information.
We have Z field in ultimately residing in BUT000.
Now when this field is used in BP_HEAD_SEARCH for search and result, it could be easily done via configuration. (since the field was added to CRMT_BUPA_IL_HEADER_SEARCH during EEWB extension.
Now, the requirement is to add the fields in Opportunity BT111S_OPPT/Search & BT111S_OPPT/Result.
I am confused with regard to the approach we need to use to get this field in search and result.
I thought the easiest option is to add the Model node and and give the BOL attribute. This works fine but I can't see this field (with dynamic getter/setter) in the UI configuration.
During the attribute creation wizard, I gave BOL entity as BTQROpp (system defaulted) and the relation was
BTADVSOpp/BTOrderHeader/BTHeaderPartnerSet/BTPartnerAll/BTBusinessPartner/ZZZGEOG_REGI
is this correct? or am I doing something wrong?
Why can't I see the fields in configuration?
So alternatively I created a field through AET and i could see this field is in the structure and in UI config, but what logic I need to put to retrieve the value?
Any advice?
Many thanks in advance for your help
Rakesh

Hi Rakesh,
Please follow below steps:
1. Append your custom field to structure associated with your search/result structure.
2. After you append this field to structure, this field would be available in context node.
3. Check if the field is reflected in available fields in configuration.
4. If field is not present in configuration then please follow steps stated by me in:
Re: New Column can not be added in chtmlb:configTable
5. Once you add this field to design layer, you would be able to configure it to your search query. Check if your query works with this field.
If not then please go through below forum :
Re: BADI for Claims search in trade promotion management
Let me know if this helps.
Regards,
Bhushan

Adding substitution field in FI

Similar Messages

Maybe you are looking for