Adding to a document type table

Hi,
I read the discussion board on this topic and I am having the same problem. I realise I have to add a value for the Mandatory Field DocNum but I cannot find code that works to do this. To add user fields I used the following:
Dim oUserTable As SAPbobsCOM.UserTable
oUserTable = oCompany.UserTables.Item("TABLE_NAME")
oUserTable.UserFields.Fields.Item("U_userfield").Value = "Value"
and if I needed to add default fields like code I would use:
oUserTable.Code = 1
but i don't know how to add to the field DocNum or DocEntry. I think DocEntry maybe read only anyway but is there a way to add to DocNum?
Thanks

SAPbobsCOM.UserTable (or SDK DI) does not support data in UDO-Tables... They can only be filled via the gui.
The functionality to this major problem should be included in SBO2006A (new DI-object). Until then, it cant be done
I see this as the single most missing feature of the SDK at the moment.

Similar Messages

Adding mimetype to document types in Web Access

I need more mimetypes than are in document types in Web Access.
Have tried to add a mimetype just to the wks$mimetype table but get java errors when go in the Usearch Admin web site. Is there a set way to add these to the Not Processed list in Web Access, so can add to the Processed list?

Can you tell us what is the mimetype that is missing from the list?
Is it a proprietary mimetype? Ultra Search does not support adding of new
mimetype as it perceive the list is complete (it is from IANA, Internet Assigned Numbers Authority).
Every new mimetype needs a message id which points to the description of the mimetype. Since
user can not add new message, you will have to use an arbitary id outside the range of 26000-26034,
you might want to try id 80189 "Document type", e.g.,
insert into wk$mimetypes(descriptor,media_type,extensions, id, msg_id)
values ('abc document','application/abc','abc',wk$mimetypes_seq.nextval, 80189);
Another workaround is to add this new mimetype directly to the ultrasearch/data/config/crawler.dat file. In that case every
data source will pick up document of this mimetype. e.g.,
MIMEINCLUDE application/abc
Keep in mind operation like this is not supported by Ultra Search.

Error Document type "" not defined

Hi All,
I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
The Infoset is build on top of BKPF,BSEG and EKPO Tables.
Document type not defined
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Any input on above issue will be of great help.
Regards,
Anjali Singh

Hi Anjali,
In which system you are getting this error? Development or Production?
I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
Regards,
Omid

Change of document type to KR

Hi Guru
I am new to Travel Management. I have got a query in Support project
While posting Amex expenses to the vendor account the client thinks it is posting to wrong document type AB, he needs it to be KR.
So my question is how can i configure or define document type KR so that while posting Amex card expns it will take KR as document type.
Maybe there can be upload file also through which the the data for amex card is loaded.
For time being can anybody tell me how to assign KR as document type and where to do this..
Thanks & Regards
Vishwaas K

Indeed for RPRFIN00-40 (PRFI) the default type was hard coded as AB but with the note 1340977 a correction was added so the document type could be changed.
Basically you need to check the parameter DOCTYPE_PRFI in the view TA20SWITCH as well as making that change.
Hope it helps
Sally

Set up document type "" in FI customizing

Hello experts,
While running MR11 (ACCM) GR/IR clearing in the backend we are getting the below error message - What needs to be done to correct this ?
<b>Document type not defined</b>
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Points will be awarded.
Thanks,
Manish Singhi

Hi,
Thnx. for ur inputs. The Document type and number ranges have all been defined. Also when we run the t-code MR11 and execute in Front end there is no issue. However, when we execute the Program SAPRCKM_MR11 and call the varaints we encounter that error. The variant has been created with the same info. what we are giving when executing in front end.
Can you give some idea ?
Thanks, Manish

Adding Sum Totals from Multiple Tables in A single Document

Hello All,
I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
Any easy solutions? I can't find anything that's helped in my search efforts.
Thanks,
Josefis

Jerry,
Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
Thanks again,
Josefis

What are the drawbacks to adding a Site Content Type to the Document Site Column?

I have a client who has enough SharePoint knowledge to be dangerous.
They are requesting that a Column be added to all Document Libraries everywhere. We built a solution that would require a bit of work when a Site Collection is created, and it would require that we run a script to identify if there are any Libraries
that do not have this Column attached.
This client wants to know why we didn't just add this Column to the default Document Site Content Type. I don't know specifics as to why that's not a good idea, just that it's not a good idea.
Can anyone point me to a resource that identifies the reasons why this is not recommended?
Thank you

I'd say there's a risk that patches or upgrades could be affected by this, or overwrite the change.
In the past I've derived a Company specific Document Content Type from the Base Document CT, and added any new company wide columns to that new CT.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

Reading the description of Sales document type and Profit centre from table

Hi
I want to print the description of Sales document type and Profit center on output
I have checked in table TVAK and CEPC but i am unable to pick description against the code
Can anyone please suggest from where can i capture the description of sales document type and profit centre
Thanks and Regards
Sunil Srinivasan

Hi
If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
For sales Document type description you pass the VBAK-AUART values into table TVAKT table and get the values for TVAKT-BEZEI is you sales document type description
For Profit center description goto table CEPCT and enter the profit center you will get the
KTEXT
LTEXT
MCTXT
regards
Prashanth
Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

Table to see pricing procedures assigned to document types

Hi Folks,
Greetings for the day,
How can i see the pricing procedures that are assigned to document types.
1. Is there a specific table name?
2. Is there a tcode where we assign pricing procedures to document types.
For example if there is pricing procedure "abc0000", how can i know what are the different document types that are assignes to this pricing procedure.
I would like to know the table name or transaction code.
Thank you in advance.
Best wishes,
Sarath

First of all, you should know where we assign the pricing procedure. If you come to know this, you would not have opened this thread. As already suggested, you can see all pricing procedures assigned to the available combination in table T683V.
In one way, you can check this. Execute VBAK table, input all document types with some validity period where you can see the related pricing procedure. But here, if you have not created any document with a document type, then this table won't show. So you have to be sure on this.
G. Lakshmipathi

Document TYPE DA is adding 180 days to payment terms in fbl5n

Hi,
In transaction code fbl5n , with document type DA system is adding 180 day + payment terms days in net due date.But we want only payment term days in addition for net due date excluding 180 days with document type DA.
How we can do that.
Regards,
Praveen

Hi Praveen,
For the time being you can edit the base line date for this document and adjust according to your requirement.
And secondly, double click on the questioned customer line item and check which payment term is used in the line item.
Then in OBB8, choose that payment term and remove value in additional months field.
There must be value "6" in that field.
SAVE and move the transport request to your production environment.
Nest time onwards, this will work according to your requirement only.
Regards,
Srinu

Ultra Search Indexer: Adding 'alien' document types.

The way the Ultra Search indexer finds src material will not work in my situation. While I may be able to give it databases to crawl, it cannot crawl our content, so the way that you tell the indexer about 'alien' document types by adding custom code to return lists of URLs so the indexer can read the src documents won't work in my scenario.
I want to know what the Ultra Search application does special when indexing documents?
Is there a description so I can reproduce using Oracle Text and perhaps point the Ultra Search querying component against my manufactured repository and have it work?
Thanks.

Is there a way to set up finder search with additional criteria so that it isolates file extensions with .docx, .pdf, .txt all in one single search?
currently the "kind is document" also brings up .jpgs and .wavs which I dont want, (or consider documents).

Table for document type Number Range interval

Hi,
I want to know the number range interval for document type in the production system but I do not have authorisation for SPRO in the prd system.
Kindly let me know the table name to check this number range interval for the document type.
Table T003 stores only the number range and not the interval.
Thanks
Suresh

Hi,
The table which has document types is T003 but the number ranges are stored in a Structure IRDP. The number ranges are maintained directly in the production system.
regards,
radhika
Edited by: kolipara radhika on Aug 25, 2008 6:01 AM

Adding object links to Document types

I tried adding the following object links to a document type
1. STKO_DOC BOM header   258
2. STPO           BOM              266
3. STPO_DPC   BOM item      259
After adding when i create a DIR against this doc type, the object link tab for all these above object links are greyedout. Its not accepting any user input for these object links. Can anybody suggest me a solution?
Edited by: sujatha sirobhushanam on Jan 19, 2009 7:52 AM

Hi,
you can add points to a post with the radio buttons on the left hand side at each post. On the left side of a reply you can see the following information:
bhupendra SINGH
Posts: 14
Registered: 5/20/08
Forum Points: 0
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
Beside the last three lines there is a radio button and this needs to be flag to provide points.
Best regards,
Christoph
P.S.: You don't need to write 'Sir' here in the DMS forum.

Adding document type

dear all,
I have a requirement ,In S_ALR_87012271 report i want to filter the values based on document type , but there is not characteristic
in available characterstics of the field .
path,
go to fsi2 -select the report of above tcode double click on it .go to display icon
now double click on any one of the 'item'.we will get a popup.
now in that popup i want to add one more field in 'available characteristics' ie document type ,
based on document type also i want to filter the data.
kindly guide me.
regards,
padmaja.

Hello Friend,
Select on the pop-up screen and press F1
you will able to see the screen no and program..
check that screen and you will be able to see it is using ALV / Table control..
and add the code for extra column
Hope it will help you..
Rgrds
Krish

Cannot Relate Look Table to Document Type

I am setting up a new R&D library. They would like to have attributes or
properties based off of the document type. Everytime I try to setup a
look table to use Document Type as the parents it clears it. If I
manually type Document Type in as the Related Table, it give the error:
"You may only relate a table to another table that exists, has no
parent, and is either Document Type or is user-defined table. Select a
table from the list."
Now it show Document type in the lookup selection but will not select
it. Is this a feature that was available at one time and removed or is
it a feature that has been disabled for some reason? Maybe a problem
with the snap-in.
Any Suggestions?

John,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Adding to a document type table

Similar Messages

Maybe you are looking for