ADDING TWO FIELDS TO MASTERDATA 0MAT_PLANT AND MAKE THEM AS INFO-OBJECTS.

Hi Bw Experts,
I have a Problem , I.e. How to add Two filelds i.e. reorderpoint and maximum stock level in Standard data source 0MAT_PLANT_ATTR for Master data 0MAT_PLANT.
If Extract structure doesnt contain these fields then I Can go for Data source enchancement. Its ok.
But this Extract structure(BIW_MARC_S) is having these fields reorderpoint and Maximumstock level and not showing me in Data source 0MAT_PLANT_ATTR and also not showing me in Hide and selcetions, if it shows me in Hide (selected ) then I can able to change it. (By unselcet check box from Hide).
These fields reorder point and maximum stock level should be maintianed as attributes of 0MAT_PLANT. (IN BW SIDE)
Friends another Problem is in Bw side my client want it should display as info-objects. Is it possible ?
Because these attributes are key-figure attributes and K.F. attributes cant be maintain as navigantional attributes.
Any help would be really appreciated.
Thanks in advance for your support.

Hi vinod,
My doubt is these fields already available in Extact structure biw_marc_s but not available in data source 0mat_plant_attr.
I can go for data source enhancement when there is no fields availble in Extract structe right.
but fieds reorder point (mabst) & maximum stock level (minbe) are available in Extract Structure.
2) IN bw side i can create these two infoobjects (reorder point and maximum stock level) as key figure infoobjects but they can't be maintained as navigatinal attributes to act as info object individually right.
Please help me out or Please pass through this message to your freinds .
It's urgent Please.
Thanks in advance,
Kumar.

Similar Messages

ALV for fields from multiple tables and make them editable

Hi,
I am working on a forecasting report. We have created few custom table e.g. store forcaset detail for whole year month wise. tables are say sales data, budget data, forcast data etc.
Now i need to make a report based on monthwise based on above mention table.
eg.o/p looks like:
column name                     type desc monthapr monthmay .......
table forcast                      Qty sales    100          150
table budget/sales             amt   amou    20.50    130.50
table sales vs forcast       amt   amount 3000     50000
-Now i don't know how to display data from multiple table in single ALV list that to with different field type.
-2nd issue is i need to make only perticuler row editable so that user can chage data.
-3rd when user change data and press calulate button - it should calculate data for future month - i got formula for that and disply the calulated data.
- 4th if user like the forcast data then when press save - change data should update dbtable.
Is this all possible with simple abap FM Or need to use ABAPOO.
I will appericiate all expert help.
Many thanks in advance.
KDE.
Edited by: kde_test on Jun 4, 2010 5:44 PM

Hi,
Solutions :
1. You can use FM REUSE_ALV_HIERSEQ_LIST_DISPLAY as guided by Ashutosh.
You can also check out this
[http://www.sap technical.com/Tutorials/ABAP/3DGraph/demo.htm] change link to saptechnical without space
2. [How to make certain rows in ALV grid editable...;
3 & 4. Use two importing paramaters 'PF_STATUS_SET' 'USER_COMMAND' of REUSE_ALV_GRID_DISPLAY.
create two function codes 'CALC and 'SAVE' in pf-status and provide your required functionality to these function codes using User-Command.
Sorry am unable to provide you with supporting code, but you can search for it and It can solve your problem
Regards,
Rohit

Adding Custom Field to Shopping Cart and PO, Classic Scenario

We are running SRM 7.0 with ECC 6.0 as the backend and using the Classic scenario. I want to add a custom field to the shopping cart and have the data transfer over to a custom field (of the same name) on the purchase order to the ECC side. I have already added the field to the shopping cart and have the data saving successfully there on the SRM side. What I am having trouble with is getting the data from the custom field to go over to ECC on the purchase order.
I have extended the Shopping Cart and Purchase Order item structures through configuration on SRM. This has added the fields to the INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF_PO structures, as described in note 672960 (do i need to extend the PO structure on SRM if using the Classic scenario?). I have also extended the CI_EKPODB and CI_EKPODBX structures on ECC as described in note 458591. So the placeholders are there.
I feel like there must be something I am missing. The OSS note 458591 suggests that just adding the fields to the needed structures will cause the data to transfer, but this does not appear to be the case.
I have an implementation of BBP_CREATE_BE_PO_NEW that I can use, but do not see where to add the data in the output parameters of that BADI. Is there a BADI I need to implement on the ECC side?
Any help in this issue would be greatly appreciated.

Dug around a little bit more and stumbled onto this article which solved it for me: [How to transfer custom fields from SRM to ECC|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?quicklink=index&overridelayout=true]
In BADI BBP_CREATE_BE_PO_NEW I had to add some code to fill in the CS_PO1_DOCUMENT-EXTENSIONIN parameter table with the structure for the BAPI_TE_MEPOITEM structure on the ECC side. The tricky part is creating a string representation of that structure with the correct offset. And it isn't as easy as just counting up the number of characters in SE12. For example, looking at my BAPI_TE_MEPOITEM structure in SE12, my custom field appears to start on character 157, but in reality, I had to offset the writing of my value to character 143. I guess it depends on what types are in there.
But once that gets figured out, it works well. As long as the custom field is added correctly to the CI_EKPODB append structure (which is appended to BAPI_TE_MEPOITEM), the data gets tranferred over in the ExtensionIn table, and SAP automatically knows what to do with the data as long as you have everything in ExtensionIn aligned correctly.
Thanks for the help everyone!

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame

Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
I am using a mac - OSX 10.7.5
I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
The contents I am placing are all Vector - Illustrator files
But, I wonder about some of the vector files I work with. Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight.
Your help is very much appreciated. Thank you!

HT2470 how would i go about taking multiple files from documents and make them part of 1 master file

how would i go about taking multiple files from documents and make them into 1 master file? I want to put all documents associated with this project together for easier access.

From the finder window, click File, click new folder, you can drag all documents into that Folder making it the master folder. You can ajso drag folders into the Master folder, and have them as sub-folders if you wish to do that. Either way they will all be in one master folder.

Will Match remove duplicate songs and duplicate albums and make them into one?

I have a ton of songs and albums that are like that. Some albums have differnet artwork too. Will match compare these to itunes and make them all unified?

The only exception is that If it finds an *exact* duplicate (tags and all), it will not upload it; however, it will still leave both copies in your original library (one will have a little cloud with a line through it next to it).

How to keep the Sonogram settings and make them "Sticky"?

I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
Also the Sonogram loses it's frequency range settings while changing the zoom.
Where is the feedback link for this application?
Thanks

are you talking about the spectrum analysis?

Would like to know how to take itunes and make them caller tunes on iphone

would like to know how to take itunes on iphone and make them caller tones

Then type "create iphone ringtones" or similar into the google search bar.
You will find several ways to it.
If you have a Mac as your signature says, then you have posted in the wrong forum - this is the windows forum - and you can use Garageband to make ringtones.

How do I best integrate existing laptops for a new server? Can I use the existing home folders on the laptops and make them into Network Users?

How do I best integrate existing laptops for a new server? Can I use the existing home folders on the laptops and make them into Network Users?

Yes it will work. I've done it for a few users in my small office. As with anything, there are quirks that you may or may not experience. Most quirks are app-related, due to app developers hard-coding absolute paths into their apps for things like temp files (Photoshop). Strategies for resolving these sorts of quirks can be found via google. You would probably have seen these quirks already when using server-based home folders for your kids. If you haven't noticed them, then you're probably fine.
The tech note you cited should be fine. It doesn't explicitly say so, but you'll need to enable ssh on your server, at least temporarily, so you can upload your home folder to the server using scp, rsync, etc. Don't try to copy the files up to the server via Finder.
Once all your files are transferred to the server and in the right place, make sure to chown them on the server, so they are owned by the userID you created for yourself on the server.
As with anything this involved, make a good backup of your laptop first.
Note I have one user that isn't too happy with the responsiveness of the periodic mobile home syncing. She has about a decade of e-mail in her home folder, probably 50 to 100 emails per day, many with attachments. Mobile home syncing takes a long time to check and sync this huge tree of itty-bitty files, eevn with server-side file tracking turned on. The other users are happy.
The nice thing about mobile home syncing is that when a user "graduates" to an age where they've earned their own laptop, you can change them from a server home user to a mobile home user, with a minimum of fuss. Also, if you lose or break a laptop, you can add a new replacement laptop to your network, and pull-down a replica of the home folder from the server, with almost no downtime.

Adding Z field in Opportunity search and result view BT111S_OPPT/Search

Hi,
I have been searching this forum on adding Z fields in search and result view but couldnt find the precise information.
We have Z field in ultimately residing in BUT000.
Now when this field is used in BP_HEAD_SEARCH for search and result, it could be easily done via configuration. (since the field was added to CRMT_BUPA_IL_HEADER_SEARCH during EEWB extension.
Now, the requirement is to add the fields in Opportunity BT111S_OPPT/Search & BT111S_OPPT/Result.
I am confused with regard to the approach we need to use to get this field in search and result.
I thought the easiest option is to add the Model node and and give the BOL attribute. This works fine but I can't see this field (with dynamic getter/setter) in the UI configuration.
During the attribute creation wizard, I gave BOL entity as BTQROpp (system defaulted) and the relation was
BTADVSOpp/BTOrderHeader/BTHeaderPartnerSet/BTPartnerAll/BTBusinessPartner/ZZZGEOG_REGI
is this correct? or am I doing something wrong?
Why can't I see the fields in configuration?
So alternatively I created a field through AET and i could see this field is in the structure and in UI config, but what logic I need to put to retrieve the value?
Any advice?
Many thanks in advance for your help
Rakesh

Hi Rakesh,
Please follow below steps:
1. Append your custom field to structure associated with your search/result structure.
2. After you append this field to structure, this field would be available in context node.
3. Check if the field is reflected in available fields in configuration.
4. If field is not present in configuration then please follow steps stated by me in:
Re: New Column can not be added in chtmlb:configTable
5. Once you add this field to design layer, you would be able to configure it to your search query. Check if your query works with this field.
If not then please go through below forum :
Re: BADI for Claims search in trade promotion management
Let me know if this helps.
Regards,
Bhushan

How to compre two fields: one whith Decimal and other without decimal?

Hi all,
I am doing a file to IDOC scenario.
In file strcture I have to compare two fields.
ActiveHSCode and Decree166HSCode where
ActiveHSCode comes with decimal values like for eg 1234.56.789.0 and Decree166HSCode comes with values like for eg 1234567890 or 4567891230 etc.
I have to ignore decimal point from ActiveHSCode and compare with Decree166HSCode,
If both of them are equal I have set ActiveIndicator as'Y' else 'N' and map this field to IDOC's field.
How to achieve this?
Please suggest.
Regards,
Sachi

Hi,
Since all the fields in mapping comes by default as a string ....
you first extract the value from ActiveHSCode using the string functions.
Then compare the
ActiveHSCode and Decree166HSCode.
Since u want to check only for the equality dont convert them to numbers.
Directly check as a string.
The code for extracting the value without decimal value is..
    String s = "12345.6789";
    s=s.substring(0,s.indexOf(".")) s.substring(s.indexOf(".")1);
    System.out.println(s);
result:123456789
Babu.

ADDED TWO FIELDS IN THE me49 OUTPUT

HI i have added the two fields for field cat for the ME49 output
could please tell me how to update those fields with the values.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_interface_check       = ' '                       "n1068548
        i_callback_program      = l_repid
        is_layout               = ls_layout
        i_grid_title            = l_grid_title
        i_grid_settings         = l_grid_settings
        it_fieldcat             = lt_fieldcat
        i_default               = 'X'
        i_save                  = 'A'
        is_variant              = ls_variant
        it_events               = lt_events
      IMPORTING
        e_exit_caused_by_caller = l_exit_caused_by_caller
        es_exit_caused_by_user = ls_exit_caused_by_user
      TABLES
        t_outtab                = <outtab>
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
<outtab> am not able to update those values into this table.

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_interface_check       = ' '                       "n1068548
        i_callback_program      = l_repid
        is_layout               = ls_layout
        i_grid_title            = l_grid_title
        i_grid_settings         = l_grid_settings
        it_fieldcat             = lt_fieldcat
        i_default               = 'X'
        i_save                  = 'A'
        is_variant              = ls_variant
        it_events               = lt_events
      IMPORTING
        e_exit_caused_by_caller = l_exit_caused_by_caller
        es_exit_caused_by_user = ls_exit_caused_by_user
      TABLES
        t_outtab                = <outtab>
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
hi i copied ME49 report two add two fields in the output, fields are added in the field catalogue but please tell me how to get the data into output, <removed by moderator>.Am not able to update the data into output.
Edited by: Thomas Zloch on Oct 23, 2011 8:44 PM

How to organize apps into folders and make them stick in iphone 3gs?

Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
Later I found another way was to use the list of my apps on the right to put them in apps.
In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
Thank you for reading to the end of this question,

OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
SYNC APPLY
I do not recall using the APPLY button on the first day trying this, but I used it this time.
After making changes, I hit APPLY and the computer began to sync with the iPhone.
This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

How do I merge my iTunes libraries and make them accessible from multiple Systems?

Our family has several Macs using several versions of OSX.
My Music collection, mostly converted from my large collection of CDs, is scattered across all the Macs and several hard drives with Systems running OSX 10.6.8, 10.8.5 and 10.9.4.
The older Macs can not be upgraded to either Mountain Lion nor Mavericks.
My most organised library is the latest on the Mac running Mavericks. It is tidy ALAC, and has all the correct metadata such as covers, composers, ISBNs etc. So I have started by organising those onto an external 1.5 Tb Hard Drive in a folder called Central iTunes Library.
I intend to then go through the Libraries on the other hard drives and systems and add them to this central external collection.
1. Will I be able to open the Central Library (created in iTunes 11.2.2) on the older Macs and Systems directly, by plugging in the hard drive?
2. Is there a better way than reopening the files from the other Systems and Hard Drives and importing them all over again into the Central Library?
eg Drag and Drop or File > New or a Dedicated Utility for the purpose
3. Is sharing from my Mac, the only way to let everyone access the library?
4. Will the other Macs be able to add to the Central Library once it is shared from my Mac?
5. How do we manage our various iPhones, iPods and iPads with one central Library?
6. Are there any hazards to watch out for?
7. What is the best way to have a duplicated backup of the library?
Thanks,
Peter

The concept of a central library sounds great (in principle), but unless you can all follow the same rules about handling playlist/ folder/ genre naming it can get into a mess. Are you sure you want to see all of your son's & wife's music when setting up iOS syncing? I also suspect your son & wife may have a different opinion about accessing all your music (with it's larger ALAC file size) - they may be happier not sifting through all your tracks to find the ones they like for use on iOS?
The store authorizes to the Mac not the library - so as you move around on each Mac & use your AppleID to purchase that Mac will get tied to that AppleID. That would be fine accept iTunes has a 90 day limit on changing the Apple ID on a computer. You will have to wait 3 months to switch to using another Apple ID to download music & apps on that device - that also affects apps that sync from iOS for backups.
Personally I think that users need their own Mac with their own library (& each Mac needs to be backed up), especially if they have their own iOS device that needs syncing to a Mac. Home Sharing is ok for moving files that you want to hear from another library - but it can be bad when a client is on wifi.
iTunes is designed to be a single user who can share over the network - it isn't intended to be one large bucket for every family member to store media, the Apple ID issue makes this pretty clear to me.
Your flaky wifi issue sounds like a reason not to rely on anything that requires networking to work too.
You are correct to worry about the library versions, eventually an iTunes update will alter the library format. Only machines that have that version can open the library - this happened from iTunes 10.7 to iTunes 11.
See how many 'old libraries' you have in the Music/iTunes/Previous iTunes Libraries/ folder - that indicates how many times iTunes has backed up & upgraded the library. Is that more than expected? Major iTunes versions will need to be performed at the same time to keep it all working with the 'central music library'.
You may be tempted to access one iTunes library over file sharing on multiple Macs. This can cause problems when one Mac updates something (placing a file lock on the library file). It's hit or miss whether the other Macs can read & write to the library.
PJRS seems to be using a networked iTunes library - I can't understand how it works with iTunes from Tiger to 10.9? What version of iTunes is used PJRS?

ADDING TWO FIELDS TO MASTERDATA 0MAT_PLANT AND MAKE THEM AS INFO-OBJECTS.

Similar Messages

Maybe you are looking for