Adding WGVBR (Total Consumption) to 0ic_c03

Hello,
has anyone added Total Consuption key figure to 0ic_c03 cube? If so, how did you populate it in the transformation? Did you have to modify the Start Routine to include this key figure?
Thanks.

Hi,
We've added this Key figure in our environment and there was no need of any routine to populate this field however you would require a routine to populae the Key figure 0NO_TOT_US, which counts the Consumption values. Here are the details:
Key figure name: 0NO_TOT_US
Description:Total consumption figure
Update Routine used:
if not COMM_STRUCTURE-tot_us_qty is initial.
result value of the routine
RESULT = 1.
Hope this helps.
Cheers
Bala Koppuravuri
Edited by: Bala Koppuravuri on Nov 1, 2008 8:02 AM

Similar Messages

Adding Sum Totals from Multiple Tables in A single Document

Hello All,
I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
Any easy solutions? I can't find anything that's helped in my search efforts.
Thanks,
Josefis

Jerry,
Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
Thanks again,
Josefis

Create a multiple Pg PDF with Forms, while adding up total of each page.

My name is Javier Morales, I am working on a project for a client in the clothing business. I created a form that it is working very good. I would like your help on figuring out how to insert additional pages to a Pdf form document and keep on adding the Totals of each page.
My email [email protected] I will really appreciate your prompt response. Right now I have them as single PDF documents, which work fine, as long as I dont try to combine them.

Fields within an AcroForm PDF need to uniquely named unless you want the identically named fields to share the same value.
You may have to rethink your approach. You should look at using the template object to spawn additional pages. Unformtuately templates do not function in versions of Reader before XI.

Arrear Amount Not adding in Total Earning

Dear All,
When we are generating pay slip by PC00_m40_cedt and with simulation PC00_M40_Calc_SIMU then Stat.net subs.adjustment
i.e. /552 component is not adding in Total Earning field , please help from where we can also show that amount in Total Earning field.
Regards
Vivek Sharma

Check whether it is coming in Window Earnings side in payslip.......If it is displying in window but it is not adding in total earnings then problem with cumulation IDs....How you have added in WIndow and Cumulation IDs.
Goto PE51....Select Window and double click on Group.add lile below...
Sgr                table       ID         Text                 Pty    Cty      DiffRel
01             RT         /552      XXXXXX               01      X               *      ( Note Use proper line type)
Cumulation IDs....click on Earning ID ex IN01......double click on IN01 and add....
RT           /552           XXXXXX            + (MS)      * (DSplit)

MVER table - Manually corrected total consumption

I am trying to determine total and manual corrected consumption based on the tables MSEG & T156 instead of using MVER.
Could someone please explaine me how is the value of the field 'Manually corrected total consumption' determined in the table MVER.

Hi,
The below will help you in understanding the behaviour . Please check the same in such a way and please post back.
http://scn.sap.com/thread/1789094
Regards,

Mvt Types used to calculate Total Consumption Values

Hi All,
I have a report that has the Total Consumptions Output from the MVER table for every period. Now My requirement is to eliminate certain Movement types from the Total Consumption Quantity. These Movement types are input as select-options by user.
Now my main problem is that , The values got from MVER table are total values per period. And if i need to exclude certain movement types that are in the total, i need to know which movement types were used to calculate the total. What movement types contribute to the values in MVER-GSV01, MVER-GSV02.....etc. How is that value found. How is that table populated by SAP directly. What is that criteria. Can i find any other table which can let me do the same, i mean manually add values to get that total.
I tried MSEG-MKPF and got some values for Material-Movement type-Period combination. But which of those values should i consider for the total value? I guess only certain movement types are considered as sum of all movement types results in a value higher than the value in MVEr. Does T156 tell us anything about which to add?
Thanks in advance..!

Hi,
Field KZVBU of T156 will give you clue which of the movement types will update consumption data. But you have to check for field XLAUT to check whether the movement is a reversal of some other movements and accordingly do the calculations.
Give me some more time to find out whether the movement types we get from above observations are the once to be considered.

Need total consumption quantity year to date for item in inventory

Hi All,
I have a requirement as below.
I need to find the total consumption quantity for a item year to date in inventory i.e i need to find out total issued quantity from year to date for a item.
so i need following details.
Consumption 1st year
Consumption 2nd year
Consumption 3rd year
we are following fiscal year JAN-DEC.
I am looking for a query to find out the above details, please help me out
Thanks

Hi Prashant,
I will try this out. If I remember correctly this did not work especially since we are using the same base condition across the board. I may have to try copying this standard condition and re-assigning it accordingly.
Thanks for the suggestion
Anirudh

Update the MTO stock into the total consumption list

Hi experts,
Is there any methods to update the MTO stock into the total consumption list?
Thanks,
Nadali

Hi,
What is your question exactly?
Consumption and stock are two different categories. Stock is the amount of goods you have and consumption is the amount of goods you consumed e.g. for production purpose.
If you consume you stock in MTS, MTO environment, the consumption of your stock will be realised trough movement types (e.g. 261) and you can report this. (MB51, MB53, COOIS)
So, if the consumption takes place, these reports (e.g. MB51) will show you the latest movements as well (if you run it after goods movement).
Please clarify your question.
BR
Csaba

No data added while loading 2lis_03_bf into 0IC_C03

Hi,
I'm trying to implement the inventory management Best Practice with infocube 0IC_C03. I've already read the How To... document and the forum but i still can't make it work.
I loaded the infocube with intial stock via 2lis_03_bx datasource. That step come correctly. The problem is when i try to load movement data into the infocube. I got 623 data records transferred in initial delta load from R/3 but 0 added to the cube (i've checked that in the manage section of the infocube). I tried to debug the update rules but i still cannot find the problem. Since i'm not changing anything from the business content i dont understand why this is happening.
Thanks in advance.
Regards,
Diego.

Diego, I think your problem looks common as there was much ado regarding this before in the forum.
Try to search for the topics
'2LIS_03_BF Concerns' by juwan carlos or
'2LIS_03_BF upload problem' by Peter Torres
as i am sure they solved this issue.
This was posted by Roberto Negro:
"Please check if in your PSA the process key (0PROCESSKEY and 0BWAPPLNM) has been filled.
If not, as I think, no key figures are updated because, in each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules. So that you MUST activate the determination of the process key!
This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW(Transaction SBIW) in your attached R/3 source system. Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0. If you have already set up historical data (for example for testing purposes) by using the setup transaction OLI1BW into the provided setup table MC03BF0SETUP, you unfortunately have to delete this data (Tx LBWG).
After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'.
Check whether the system updates data into the 0IC_C03 now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.

Vehicle total consumption and cost report - Fleet Management

Dear All,
I have created a Fleet object having multiple fuels i.e. Gasoline and CNG and entered transactional data using IFCU transaction. My client need to know how much Gasoline and CNG was consumed for the Fleet Object and cost incurred for the fuel consumption. In MCIZ report it shows the total fuel consumption counter reading for the vehicle regardless of different fuel types.
Is there any standard report to view the said information?
Thanks & Regards,
Saif Ali Momin

The following method may work for you
Divide the distance by the litres used to get the km/litre
Convert the km/litre to L/100 km i.e. divide 100 by km per litre
Convert km/litre to miles per gallon i.e. multiply km/litre by 2.825
Fuel conversion formula table
To convert Formula to use
km per litre to litres per 100 km divide 100 by km per litre
km per litre to miles per gallon multiply km per litre by 2.825
litres per 100km to miles per gallon divide 282.5 by litres per 100km
miles per gallon to litres per 100km divide 282.5 by miles per gallon
litres per 100km to km per litre divide 100 by litres per 100 km
miles per gallon to km per litre multiply miles per gallon by 0.354
km to miles multiply km by .62137
miles to km multiply miles by 1.6093
gallons to litres multiply gallons by 4.546
litres to gallons multiply litres by .21997
Hope this of help
Jim

Just added Ram (total of 10GB) and Motion ate it all up...........

What can I change my HDV footage to for better performance in Motion? What kind of footage are you guys working with?
I tried changing it to ProRes 422 and building a project but it still played very slow.
I am very unhappy with it playing 2 fps for just adding total of 10GB of Ram.
I just simply have to play the (HDV) footage with nothing on it and I watch the Ram go from 1GB to 9.50GB. These are only 2 minute projects.
Message was edited by: Marco Giordani1

Marco Giordani1 wrote:
David,
I did at one time convert the HDV footage to ProRes, and Final Cut wasn't able to play 4 streams of video in the Multi-cam editor.
(I think my hard-drive was not able to play all that information at once) What do you think?
You would need a RAID configuration to play that many full rez streams but that's why FCP has the ProRes Proxy workflow. You work at lower rez with lots of streams and then recapture (or reconform) at full rez.
bogiesan

Adding/Enabling Totals & Subtotals Button in ALV Report Output

Hi Guys,
I would like to know , how to add / enable Totals & Subtotals Button on the application tool bar in alv report output.
Regards,
Kishan

ok so here i am sending my code....its also interactive...
and in second list i am displaying quantity....
*& Report ZINT_ALV
REPORT zint_alv.
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       mseg.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
     END OF itab.
DATA:BEGIN OF itab1 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      menge LIKE mseg-menge,
      meins LIKE mseg-meins,
      werks LIKE mseg-werks,
     END OF itab1.
DATA:fcat TYPE slis_t_fieldcat_alv,
     fcat1 TYPE slis_t_fieldcat_alv,
     eve TYPE slis_t_event,
     eve1 TYPE slis_t_event.
DATA:t_mat LIKE mara-matnr,
     s_mat LIKE mara-matnr,
     g_repid LIKE sy-repid.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_fcat USING fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*&      Form build_fcat
      text
     -->T_FCAT     text
FORM build_fcat USING t_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-input = ' '.
wa_fcat-edit = 'X'.
wa_fcat-input = 'X'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_fcat
*&      Form build_eve
      text
FORM build_eve.
DATA:t_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt
ON maramatnr = maktmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid         "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND'
     i_grid_title                      = 'Interactive ALV'
     it_fieldcat                       = fcat
     it_events                         = eve
    TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form user_command
      text
     -->U_COM      text
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
    WHEN '&IC1'.
      READ TABLE itab INDEX sel_field-tabindex.
      IF sel_field-fieldname = 'MATNR'.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          PERFORM build_cat1 USING fcat1.
          PERFORM build_eve1.
          PERFORM get_data1.
          PERFORM dis_data1.
        ENDIF.
      ENDIF.
     SET PARAMETER ID 'MAT' FIELD t_mat.
     CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_fcat1
      text
     -->T_FCAT1    text
FORM build_cat1 USING t_fcat1 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat1 TYPE slis_fieldcat_alv.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MBLNR'.
wa_fcat1-seltext_m = 'Material Doc.'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MENGE'.
wa_fcat1-seltext_m = 'Quantity'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MEINS'.
wa_fcat1-seltext_m = 'UOM'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'WERKS'.
wa_fcat1-seltext_m = 'Plant'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
ENDFORM.                    "build_fcat1
*&      Form build_eve1
      text
FORM build_eve1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = eve1
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "build_eve1
*&      Form get_data1
      text
FORM get_data1.
SELECT mblnr menge meins werks FROM mseg
INTO CORRESPONDING FIELDS OF TABLE itab1
WHERE matnr = t_mat.
ENDFORM.                                                    "get_data1
*&      Form dis_data1
      text
FORM dis_data1.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND1'
     it_fieldcat                       = fcat1
     it_events                         = eve1
    TABLES
      t_outtab                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "dis_data1

Condition value of Tax condition type gets added to Total Value in Contract

Hi All,
I'm currently investigating an issue where there are 2 line items in an SAP Sales Contract. There is a human error in the second line where the billing end date is less than billing start date in the billing plan. Consequently, the second line has null Outgoing target value.
However, the header Total value in the Contract gets wrongly calculated as Basic condition value of 1st line + Condition value of tax condition type of line one due to this.   When I modify the billing end date for the second line item to be a date greater than the billing start date, the above problem disappears and the total value of the contract does not include the tax component.
For eg.
Normal Error free Contract
Total Value at Header =   700.00 EUR
                   Material          Outgoing Target val
Item 0010    MAT1               450.00                          ( 450 + 50 (tax ) )
Item 0020    MAT2               150.00
Contract with billing plan error in second line
Total value at Header =   550.00 EUR
                        MAterial       Outgoing target val
Item 0010         MAT1             450.00                    ( 450 + 50 (tax ) )
Item 0020         MAT2              0.00
Any inputs would be most welcome.
Regards,
Venkatesh.
Edited by: Venkatesh Gopalarathnam on Jan 24, 2012 9:48 AM

No, i didn't.
Actually, i enter condition type and amount in sales order manually.
At that time my program which i modified at 'Define And Assign Pricing Procedures' in IMG should be run.
But the result of running is different from my purpose.
To change Condition value of condition type in sales order, are there any solution?

Condition value of Tax gets wrongly added to Total value of Contract

Hi All,
I'm currently investigating an issue where there are 2 line items in an SAP Sales Contract. There is a human error in the second line where the billing end date is less than billing start date in the billing plan. Consequently, the second line has null Outgoing target value.
However, the header Total value in the Contract gets wrongly calculated as Basic condition value of 1st line + Condition value of tax condition type of line one due to this. When I modify the billing end date for the second line item to be a date greater than the billing start date, the above problem disappears and the total value of the contract does not include the tax component.
For eg.
Normal Error free Contract
Total Value at Header = 700.00 EUR
Material Outgoing Target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 150.00
Contract with billing plan error in second line
Total value at Header = 550.00 EUR
MAterial Outgoing target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 0.00
Any inputs would be most welcome.
Regards,
Venkatesh.

Got the solution by making the condition type as manual.
Thanks.
Dhruba

New Loan wage type to be added in total deductions

Hi,
I have to include new wage type say as Thrift Guarantee (2440) as standard value of Re.1. When the entry is putting in IT 0045 this wage type 2440 automatically will generate. Now i want it to include in total deductions in payslip. I believe that its somewhere missing in PCR AND Schema. Cumlation class 10 tick is already there. its already included in the payslip while calculating total deduction this amount is not including in total deduction.
Can anyone guide me on this step by step.
Edited by: suresh kumar on Jun 15, 2011 5:58 AM

Fruther to my question i found the relevant pcr and modified the pcr in the line 180
000010              ELIMI *   NEXTR A                        ANNUITY/INSTALLMENT
000020          A D VAKEYLNCLS
000030 A            AMT=N /LIDNEXTR A                        INTEREST
000040 A        A   ADDWTN/LLBNEXTR B
000050 A        B   AMT=N /LEPNEXTR C    EXT INST
000060 A        C   AMT<N /LLBZERO=&HELPADDWT&HELPSUBWTI/110SUBWTN/LLBNEXTR D
000070 A        D   AMT=N /LEPSUBWTN/LEPAMT=& HELPADDWTN/LEPNEXTR E
000080 A        E   AMT= ANRTENEXTR F              ANNUITY
000090 A        F   AMT<N /LLBSUBWTI/110SUBWTN/LLBAMT-N /LIDADDWTN/LRP
000100 I          D VAKEYLNTYP
000110 I ****       AMT=N /LIDNEXTR A     SUBWTI/110                   INTEREST
000120 I ****   A   AMT=N /LEPNEXTR B    EXT INST
000130 I ****   B   AMT<N /LLBZERO=&HELPADDWT&HELPSUBWTI/110SUBWTN/LLBNEXTR C
000140 I ****   C   AMT=N /LEPSUBWTN/LEPAMT=& HELPADDWTN/LEPNEXTR D
000150 I ****   D   AMT= TILBTNEXTR E              REG INST
000160 I ****   E   AMT<N /LLBSUBWTI/110ADDWTN/LRPSUBWTN/LLB
000170 I 9040       AMT=N /LIDNEXTR A               INTEREST
000180 I 9040   A   AMT+0.25 NEXTR B               INTEREST
000190 I 9040   B   SUBWTI/110NEXTR C
000200 I 9040   C   AMT=N /LEPNEXTR D    EXT INST
000210 I 9040   D   AMT<N /LLBZERO=&HELPADDWT&HELPSUBWTI/110SUBWTN/LLBNEXTR E
000220 I 9040   E   AMT=N /LEPSUBWTN/LEPAMT=& HELPADDWTN/LEPNEXTR F
000230 I 9040   F   AMT= TILBTNEXTR G              REG INST
000240 I 9040   G   AMT<N /LLBSUBWTI/110ADDWTN/LRPSUBWTN/LLB
Now i want it to consider the retro especially from march'2011 or only from previous month. How to proceed on this
Regards

Adding WGVBR (Total Consumption) to 0ic_c03

Similar Messages

Maybe you are looking for