Additinal Fields in POWL Search Criterea for RFx
Hi,
We want to add a column in the POWL result and a new field in the search criteria in SRM 7.0
We are able to add column in POWL result after adding a field in structure /SAPSRM/S_SEARCH_RESULT_BID and confguration in the T-code
/SAPSRM/POWL_CUST. For search criteria we have added same field in the structure. /SAPSRM/S_SEARCHFIELDS but we are unable to bring that field in the search criteria.
Please help.
Ganapathi
Hi,
After changing any POWL configuration . Below are the two important points.
1. After changing the POWL Feeder configuration within transaction /SAPSRM/POWL_CUST all queries of the changed Feeder must be refreshed (deleted) using report POWL_D01
2. After changing the POWL Feeder Type within transaction POWL_TYPE all queries of the changed Feeder must be
refreshed (deleted) using report POWL_D01.
after changing the search criteria try to execute the report for one user and check for that user in portal.
regards,
Devi
Similar Messages
-
Addtional field display in search help for plant in MM01/MM02/MM03
Hi Experts,
my requirment is that when see search values of ( F4) plant field in MM01/MM02/MM03 t.codes only avilable plant and name1 values . i need to display name2 values also. How i can search help of plant field should be enhanced.
Regards
JayaHi,
You need to:
1/ append ALV grid structure PLM_ALV_116 with field (in SE11)
2/ in form WERKS_LISTE in include LMATEFLI you need to implement following modyfication selecting NAME2 for all the plants which are to be shown:
FORM werks_liste.
* convert into ALV list
DATA: c_structure_name TYPE tabname VALUE 'PLM_ALV_116'.
DATA: status_set TYPE slis_formname VALUE 'ALV_PF_STATUS1' .
DATA: et_list TYPE TABLE OF gs_list_type_06 .
DATA: l_et_list LIKE LINE OF et_list .
DATA: l_seqwerk LIKE LINE OF seqwerk .
* Prapering data to be display
* SET TITLEBAR 'TIT' WITH text-003. Note 821186
G_titlebar = text-003.
LOOP AT seqwerk INTO l_seqwerk .
MOVE-CORRESPONDING l_seqwerk TO l_et_list .
APPEND l_et_list TO et_list .
ENDLOOP .
"-------->INSERT
SELECT name2 FROM t001W
INTO CORRESPONDING-FIELDS OF TABLE et_list
FOR ALL ENTRIES IN et_list
WHERE werks EQ et_list-werks.
"<--------
* Praper fields for ALV Disply
PERFORM alv_list_fieldcat_create
USING lt_fieldcat c_structure_name .
* Diplay ALV list
PERFORM alv_list_display TABLES et_list[]
USING c_structure_name
status_set
space.
ENDFORM. "WERKS_LISTE
Regards,
Marcin -
PPS POWL for RFx/PO shows additional "user-specified.." columns
After we turned on PPS for SRM 7.0, we realize the POWL result list for RFx, PO shows many extra columns entitled "User-Spcd Sts01", "User-Spcd Sts02", etc, making the navigation unfriendly. But when I looked at the IMG configuration for POWL Field Catelog for feeder type e.g. SAPSRM_FEEDER_RFQ, I see no additional columns. So my question is where to find the definition of those additional columns so that I can remove them?
Thanks!
Answer: add the columns manually and mark them "hidden" in customizing.
Edited by: Jay Yang on Dec 16, 2010 4:55 AMHI,
which additional column
all possibilities are there in search
Regards
Kailas Ugale -
Hi Experts,
This is a Z table with first field as GROUP and second field as KEY.
User can select values for first field using a search help. It has three possibel entries
1. Purchasing Org
2. Region
3. Coutnry
In second field the user has to enetr value based on selection in first field, for eg. if 1 is chosen in 1st field user will enter name of a purchasing organisation.
Can we dispay a search help for second field based on the selection in first field?
Like if 1 is selected in 1st field second field should display search help for Purchasing Org
if 2 is selected in 1st field second field should display search help for Region....in SM30?
How can we achieve this?
Thank you,
AnubhavHi Anubhav,
1.Go to the table maintenance generator screen from SE11 (Utilities -> Table Maintenance Generator).
2. In the Table maintenance generator screen , navigate to Environment -> Modifications -> Maintenance Screens
3. Select and Edit the screen where you need this new search help
4. Create a Process on Value Request module for your second field at the end of the screen flow logic after MODULE LISTE_AFTER_LOOP.
5. In the POV module, use funcntion DYNP_VALUES_READ to read the value of field 1 on the screen
6. Fill your own table with the values for field 2 based on field 1 and display selection using the function F4IF_INT_TABLE_VALUE_REQUEST
Hope this helps.
- Puneet -
Search help for fields in custom table..
hi,
in my custom table i have two fields - table name and field name. when user selects table name as VBAP , for field names i need all the fields in VBAP to be displayed and for that I set the check table as DD03L and I am able to see all the fields. But i am not able to see the description of the fields rather seeing field name , other key fields of DD03L.
How do i get to display something like
field name - description - length (length of the field as defined in DDIC)
If search help will help then can u pl tell me how to create one ? or any standard can be used ?
thanksYes, you need to create search help and assign it to the field 'field name'
Please search SDN for how to create search help. There are 100's of threads with this
By the way the texts can be found in table DD03T for tables as well as for fields -
Dynamic search help for one field of the SM30 generated maintenance view
Hi experts,
I have one Z* table with three fields. For that table I have generated maintenance dialog in SE55 so I can now run the maintenance in SM30. My requirement is: as soon as a user enters a value for the first field, the search help for the second field should be depended on the value in the first field. Let's say when user entered value 01 into the first field then the search help for the second field should be S_HLP01. For other values entered into the first screen the search help for the second field should be S_HLP02. Both search helps are standard (the names differ).
Is there any change how to achieve this without making completely new dynpro transaction?Hi ,
You can try it this way.
pass your match-code( search help to function ) HELP_VALUES_GET_WITH_MATCHCODE and get the value and update it in your screen field.
But you have to modify the flow logic in POV event. it would be better if you create your own transaction because once the maintenance is regenerated your modified flow logic will vanish -
Removing standard operators for a field in Advanced search
Hi,
JDev 11.1.1.3.
In ADF application, we need to remove few standard operators from the list for a field in Advanced search. For this we have followed the below oracle documentation:
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/web_search_bc.htm#ADFFD2457
27.3.3 How to Create Custom Operators or Remove Standard Operators
As specified in the doc, we have added the below "CompOper" tag to VO.xml. We have to remove all the operators present in the list except the "Equal to". But the issue is, using below code the "Not between" and "contains" operators are deleted from list, but "Not equl to" is still getting displayed. We have also tried "Doesnotequal". I have tried the oper string with spaces, without spaces, spaces replaced by underscore.
Can some one please provide the exact String to be passed in oper attribute of CompOper for all operators?
<ViewCriteriaItem
Name="CmLookupTypesVOCriteria_vcrow16_Category"
ViewAttribute="Category"
Operator="="
Conjunction="AND"
Required="Optional"
UpperColumns="1">
<CompOper Name="Category" ToDo="-1" Oper="NOTEQUALTO"/>
<CompOper Name="Category" ToDo="-1" Oper="NOTBETWEEN"/>
<CompOper Name="Category" ToDo="-1" Oper="CONTAINS"/>
</ViewCriteriaItem>
Thanks,
Manasa TadiI am not able to find the list for the entire set of operators, but you could follow a simple technique to identify the exact operator to be used:
In the View Criteria editor, for any of the attribute, modify the operator to any desired value, this would update the *VO.xml,
use the same operator, if you want to hide it in advanced mode - as you have done earlier.
<ViewCriteriaItem
Name="CmLookupTypesVOCriteria_vcrow16_Category"
ViewAttribute="Category"
Operator="="
Conjunction="AND"
Required="Optional"
UpperColumns="1">
<CompOper Name="Category" ToDo="-1" Oper="NOTEQUALTO"/>
<CompOper Name="Category" ToDo="-1" Oper="NOTBETWEEN"/>
<CompOper Name="Category" ToDo="-1" Oper="CONTAINS"/>
</ViewCriteriaItem>
Thanks,
Navaneeth -
Add new Search Field in the Search Page
Hi all,
I needed to add a new search field in the search page, for the same i appended the search structure and added the required field.
Then in Config i made it available. The field type is input field of type BU_PARTNER.
The issue is when i make the same field display in UI it apears as Blank Drop down, it should come as input field.
I tried to make it input via get-p as well but still it is DDLB.
I also tried via Design layer, but it has not changed to Input.
Please suggest how to proceed further.
Regards,
VandyHi,
Just a thought, Did you remove the field and reassign it to the configuration view after you made the changes???
Regards
Rekha Dadwal -
Add a field in the Search Criteria in POWL for Invoice
Hi,
I am trying to add a field or change Selection Parameters in Search criteria POWL for Invoice. But for SC, PO and Confirmation I can do it from DB Criteria. But for Invoice I implemented these BADI's and its not triggering.
/SAPSRM/BD_POWL_CHNG_CUF_SRCH
/SAPSRM/BD_POWL_CHNG_SELCRIT
Any idea why its not trigeering? Am I missing anything? I appreciate your help.
Thanks,
Carl
Edited by: Shears80 on Sep 28, 2011 9:40 PMHi Cral ,
Add a field in the Search Criteria in POWL for Invoice
append the custom attributes in this structure
/SAPSRM/S_SEARCH_RESULT_INV
goto tcode sm30 /SAPSRM/V_SRC_CR enter the filed for BO/ BUS2121(select the business object based on the requirement)
the creation type must be suitable for the type
criterion name : zzfield
criterion name : parameter
structure : /SAPSRM/S_SEARCH_RESULT_INV
field name : zzfield
this are the feeder class for invoice .
/SAPSRM/CL_CLL_POWLT_INV_PROF
/SAPSRM/CL_CLL_POWLT_INV
/SAPSRM/CL_CLL_POWLT_INV_S
based on the powl query you need to do the enhancement in the feeder class .
Thanks & Regards
Pradeep Kumar Dondeti -
New custom field in the POWL search criteria
Hi experts,
My requirement is to add a new custom field in the search criteria (Parameters)
In my Easy shopping card POWL. I need to add custom fields in search criteria.
I tried appending my custom fields in structure /SAPSRM/S_SEARCHFIELDS
And customized the POWL type DB criteria SAPSRM_FEEDER_SC by adding the custom field
But still the newly added search criteria is not displaying in the
Query SAPSRM_E_CHECKSTATUS_01 in powl_query transaction.
Kindly help me to solve this issue
Regards
Chinnaiya PHello Konstantin,
thanks for the reply...
I tried to add an extra Field(Company code) in POWL Search. the problem is the Field Company code doesnt get updated in BBP_PDHSC and BBP_PDISC with the value used in while creating SC.
I only get the Company code value in table BBP_PDBEI for SC.
So when i give any value in POWL search for company code no data is shown even though the SC was created in the inputted Company code.
so how to go about adding CC as search criteria in POWL so that the resultant output is filtered on the basis of CC value.
Thanks
Rajat -
Custom field in the search criteria of contract management in SRM - POWL
Hi,
I have to add a custom field in the search criteria of the POWL query for Contract Management. I have done adjusting of the POWL by adding the custom field in the /SAPSRM/S_POWL_RESULT_CTR and /SAPSRM/S_SEARCH_RESULT_CTR. I have created entries in TREX and Field cat but still the field is not visible in the query.
Please let me know how can i get the visibility of custom field on the POWL query for contract.
Regards,
GeetaHi,
Try to delete powl query cache using report POWL_D01.
Regards,
Marcin -
Is there any possibility to create a POWL for "RFx Response"?
We could see a category QUOT under IMG>CROSS APPLICATION COMPONENTS>GENERIC SAP BUSINESS SUITE FUNCTIONS>PERSONAL OBJECT WORK LIST>DEFINE CATEGORIES.
But we are not able to see any Application (neither FEEDER OR AS-advanced search) or Query ID for the same.
For example, we wanted a POWL of RFx responses which are accepted but PO/contract not prepared.
Any idea how to achive this?
GHif anybody likes to answer... still question is open...you are welcome!
GH -
Creating search help for a field in AdHoc Query
Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
KirstenHi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten -
How to add a search help for a field in alv?
HI!Everyone ,
i want to add a search help created by myself for one field in alv,
and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
can anyone help me ?
thanks!HI,Vijay.
My code like this :
PERFORM build_fcat.
PERFORM build_objects.
PERFORM layo_build.
PERFORM set_drdn_table .
CALL METHOD alv_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'STU_S'
is_layout = s_layo
CHANGING
it_outtab = itab_out
it_fieldcatalog = i_fcat
."Period
IF sy-subrc <> 0.
EXIT.
ENDIF.
for example, there is a field 'UNAME' IN Structure 'STU_S',
i want to add a search help for 'UNAME'.
the 'UNAME' is not users in SAP R/3 , i want to add some data by myself or from a table . -
How to add search help for field in ALV object
Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus
Maybe you are looking for
-
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application He got this error Login failed for user ''. The user is not a
-
How to change colors of DefaultMetalTheme
Hello, I m trying to give a different color to my GUI by simply extending the DefaultMetalTheme class ,but any change in the primary or secondary colors dont reflect in my GUI.. plzz help me sort out this problem..
-
Error: Bind Variable Does not Exist
Hello, I am getting a bind error, Although I have only one bind variable, the debug output shows three bind parameters exist. Please let me know why this happens ? 04/08/11 17:02:50 [5341] SELECT Property.PID, Property.CID, Property.REO, Property.MLS
-
Mac pro put in new ram now none of the ram works
mac pro put in new ram now none of the ram works it just hangs on restart the ram worked great for 12 hours then the computer restarted on its own since then it hangs on restart and never gets to the desktop
-
Macbook Pro stuck on software update
I haven't done Software Update for awhile (maybe weeks), so I finally decided to update my Macbook Pro (2011 & running Snow Leopard). There were a lot of things to update as it said it was installing 15 items. The progression bar is mostly full and i