New custom field in the POWL search criteria

Hi experts,
My requirement is to add a new custom field in the search criteria (Parameters)
In my Easy shopping card POWL. I need to add custom fields in search criteria.
I tried appending my custom fields in structure /SAPSRM/S_SEARCHFIELDS
And customized the POWL type DB criteria SAPSRM_FEEDER_SC by adding the custom field
But still the newly added search criteria is not displaying in the
Query SAPSRM_E_CHECKSTATUS_01 in powl_query transaction.
Kindly help me to solve this issue
Regards
Chinnaiya P

Hello Konstantin,
thanks for the reply...
I tried to add an extra Field(Company code) in POWL Search. the problem is the Field Company code doesnt get updated in BBP_PDHSC and BBP_PDISC with the value used in while creating SC.
I only get the Company code value in table BBP_PDBEI for SC.
So when i give any value in POWL search for company code no data is shown even though the SC was created in the inputted Company code.
so how to go about adding CC as search criteria in POWL so that the resultant output is filtered on the basis of CC value.
Thanks
Rajat

Similar Messages

OVS - how to change the position of the fields in the OVS search criteria

Hi,
I have an OVS search screen where 4 search criterias are there.Based on the search criteria , the values will be papulated in the OVS screen.
Now I have to change the position of the fields in the search criteria.Means if the Maximum field (one of the search criteria) is in the first position,I need to put it in the last position.I have ro change the position of the search criteria field and not the result fields.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandeep,
please go through this article for customizing Value Help:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c6132f-4ea3-2b10-4d8f-e68d2e96113d]
Thanks and Regards

How to add a standard field to the Product search criteria ?

Hello all,
despite my searches on google and sdn, i'm still confused on how to add a standard field in the search criteria of the Product seach screens (component/view PRD01QR/Search for example) , I mean a standard Product field that is not included in the available fields list in the UI configuration tool.
I found some explanations for adding a specific Z-Field, this is ok , but I'd like to add a standard field as a search criterion, namely the item category group.
Could someone give me the needed detailed steps for this?
thanks
Ludovic

Hi
Chk ths link out :
http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component
Rgds,
Swati

Custom field in the search criteria of contract management in SRM - POWL

Hi,
I have to add a custom field in the search criteria of the POWL query for Contract Management. I have done adjusting of the POWL by adding the custom field in the /SAPSRM/S_POWL_RESULT_CTR and /SAPSRM/S_SEARCH_RESULT_CTR. I have created entries in TREX and Field cat but still the field is not visible in the query.
Please let me know how can i get the visibility of custom field on the POWL query for contract.
Regards,
Geeta

Hi,
Try to delete powl query cache using report POWL_D01.
Regards,
Marcin

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

Additional custom field on the assignments tab KO01

Hi Geeks ,
I have a requirement to add a new custom field to the assignments tab of the tcode KO01. This new field is not available in the structure CI_AUFK . Is it achievable via enhancement COOPA003 ? If yes , then how ? . A <removed by moderator> response would really be appreciated.
Thanks,
Preetinder singh.
Edited by: Thomas Zloch on Nov 4, 2011 11:28 PM

Proceed as follows:
    You can use the CMOD transaction to create an enhancement project for the COOPA003 enhancement.
    You can use the SE11 transaction to create the CI_AUFK structure as described above. Transfer three fields into this structure and activate it:
Field name Data element
ZZMATNR MATNR (Material nummer)
ZZKUNNR KUNNR (Debitor)
ZZTEXT30 TEXT30 (30-character text)
It is recommended that you reactivate the COAS and AUFKV views separately.
    Copy the following objcts from the KOXM function group to the XAUF function group, using the SE80 transaction (Workbench Organizer). There, display the KOXM function group, position
the cursor on the source object, and copy it to the corresponding target object.
Caution
When you copy, the target objects are overwritten. If the target objects already exist, then insert the source code for the source object into the target object.
Object type Source Target
Screen SAPLKOXM 0100 to SAPLXAUF 0100
Include (Top include) LKOXMTOP to ZXAUFTOP
Include (PBO) LKOXMF04 to ZXAUFU04
Include (PAI) LKOXMF05 to ZXAUFU05
    The ZXAUFTOP still requires changes to the source code. Use the SE38 transaction (ABAP Editor) to process this include. Detailed instructions are contained in the source code as
comments.
    Activate the enhancement project. The fields should now be available in the master data maintenance, and should be saved.
    Function/Program:
        EXIT_SAPMKAUF_002: Function callup for customer fields: PBO data SAP -> Customer
        EXIT_SAPMKAUF_003: Function callup for customer fields: PAI data customer -> SAP
Include ZXAUFU04 (part of EXIT_SAPMKAUF_002)
*& Include           ZXAUFU04
write imported data in global structures
MOVE-CORRESPONDING I_AUFK TO GLOBAL_AUFK.
MOVE-CORRESPONDING I_KAUF TO GLOBAL_KAUF.
decide wich subscreen is to be displayed
IF ( GLOBAL_KAUF-PAR_LAYOU <> 'ABCD' ) AND
     ( GLOBAL_AUFK-AUART <> '1234' ).
    SUBSCREEN = '0100'.
ELSE.
    SUBSCREEN = SPACE.
ENDIF.
*& Include           ZXAUFU04
This include is part of the example programm for
customer exit COOPA003.
To activate the example, copy it to the include ZXAUFF05.
Remove the asteriks indicating a comment line in the first column.
Make sure ZXAUFF05 doesn't exist yet! Use cut-and-paste instead.
INCLUDE LKOXMF05                                                   *
give only customer fields back to SAP-Programm
*C_USER_CI_AUFK-ZZMATNR    = GLOBAL_AUFK-ZZMATNR.
*C_USER_CI_AUFK-ZZKUNNR    = GLOBAL_AUFK-ZZKUNNR.
*C_USER_CI_AUFK-ZZTEXT30   = GLOBAL_AUFK-ZZTEXT30.
Edited by: ZAHID HAMEED on Nov 5, 2011 12:37 PM

Add custom fields to the business partner (UKM_BP) thru BADI

Hi
I want to know how to add Additional business partner attributes(custom fields) to Business partner (Transaction : UKM_BP)
I also added the custom fields to structure UKM_S_BP_CUSTOMER_EXTENSION in the method FILL_FIELDS of BADI UKM_BP_ADD_FIELDS, But nothign is populating on the screen of UKM_BP after activating the below BADI's with SAP provided sample code with above structure.
there are 2 BADI's for this requirements but it doesn't any thing about the screens
UKM_BP_ADD_FIELDS
UKM_EV_FORMULA
Please let me know the detailed steps other than activating these BADI's with sample code by SAP.
Thanks
Govi

Thanks for your reply
BADI - UKM_BP_ADD_FIELDS
Documentation of this BADI shows as follows...
With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
Methods of this BAdI:
FILL_FIELDS
To provide additional fields for the formula editor
FILL_ADD_INFOS and SAVE_ADD_INFOS
To define additional information for the following data in table form:
Collateral
Negative event
Check exceptions
Credit insurance
I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
I have looked at BDT Business data toolset
http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
but i didn't get any idea ...
Can you please elaborate and let me know how to do this for my requirement?
Thanks
Govi

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

Change the default search criteria in CMD-F

When you enter CMD-F from a Finder window, the default search criteria that come up is "Kind" is "Any". This is probably the most useless search criterion I can imagine. It is always necessary to add more criteria to get a minimally useful search under way.
Can anyone point me to a source I could use to change this default? In my case, the most common and useful starting point would be "Filename" Contains, and then a blank field into which I could enter a string that might be all or part of a filename.
Thanks.

I don't know how to change the default, but you can set up any number of starting points for searches like this:
Enter Command-F in a Finder window, then set the criteria Filename and Contains. Click the Save lozenge.
In the Save dialog, you will have the option of saving this search to the Finder Sidebar in addition to the default ~/Library/Saved Searches. Click on Smart icon in the Sidebar and a new Finder Search tab will open with your parameters set.
If you don't want to save this search in your Sidebar, you can command-drag its smart folder from ~/Library/Saved Searches to the Finder Toolbar. Clicking on that will bring up a Finder Search with your parameters, as well.

In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

How to add a custom field to the "Projects" page "Group by" data menu list

Hi,
I'm deploying Project Online and I want to group projects by a custom field on the "Projects" page. Currently I can see options for group by Project Name, Start, Finish, % complete etc. I would like to group by a custom field of programme name
which is filled in on the Project Details form.
I can create the enterprise field etc, however I can't work out how to make the new enterprise field appear in this list. Or am I barking up the wrong tree and should be creating separate Project Types for each programme?
Any help an advise greatly appreciated.
Regards,
Conrad

Hello, add the programme field to the Project Center view then it will be available to group by. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

New Customer Field in CCM2.0

Hi
I need a new customer field in catalog which I want in the shopping cart as well. I have used the allready created customer fields 1-5.
Do anyone know how to create a new OCI customer fields?
Thanks in advance
Best regards
Jesper

Hi
We have allready used the 5 standard customer fields in the catalog and want a new one.
We use the standard for
- "Asset class",
- "No control" (for workflow),
- "Approval" (for workflow),
- "GL account" (different GL account within same UNSPSC class)
- "High Level Articles" which control workflow and it is possible to change price and vendor in SC.
Then I need a new field for a responsible purchasing department (purchasing group). When a user buy an article with an responsible purchasing department the SC must be approved first before it runs the normal workflow.
For the above new fields I therefore need 6 customer fields.
The question is, can I create a new customer field or do I have to use a standard field in catalog and transfer this to a new field in SC??
Best regards
Jesper

New custom field in the POWL search criteria

Similar Messages

Maybe you are looking for