Addition of new fields to existing Infotype: Error in Quality Server.

Hi Experts,
I have added new fields by adding custom include to Infotype 4000 using t-Code PM01. It is working perfectly fine in DEV. But, in QLT, the custom Include is not attached to the P4000 structure. Independently, CI_P4000 exists in QLT.
I have checked all the Transport Requests, nothing is missing. However, The structure of P4000 is not getting modified as per requirement. What should I do?

Hi Experts,
The Error was coming with Infotype 4000. I tried adding the same field by updating Infotype 4001 and it worked. So, I have used that only, and my requirement is fulfilled.
But, I am still not sure if we can add field in similar way in Infotype 4000.
Thanks to all for providing me with possible solutions!!
Regards,
Shruti Gupta.

Similar Messages

Addition of new field in existing cube which has data?

I Have service provider field in ods and which is populating data on daily basis.
Now I need to populate that field into cube and then reportingu2026u2026..
For this do I need to delete the data from the cube and add that new field and need to load the last 6 month data? Or else with out doing deletion of data can I add a field in cube?
Regards

Remodeling is a new concept introduced in BI 2004s to manage changes to the structure effectively in an infoprovider, where the data is loaded and running. As of now we can make changes to the Infocube only. The same would be extended to the DSO and InfoObject in the future releases.
Before you proceed to experience the remodeling process, letu2019s bear in mind few of the golden rules given by SAP.
--> As a precaution, make a back-up of your data before you start remodeling.
Before you start remodeling, make sure:
--> You have stopped any process chains that run periodically and affect the corresponding InfoProvider.
--> Do not restart these process chains until remodeling is finished. There is enough available table space on the database.
--> After remodeling, check which BI objects that are connected to the InfoProvider (transformation rules, Multiproviders, queries and so on) have been deactivated. You have to reactivate these objects manually.
You can go for remodelling. If you still have doubt, try the same in your Sandbox and repeat the process in Production as you are saying you have time of 1week.

Enhancement Adding a new field to a infotype

We are implementing E-Recruiting and trying to a new field to a existing infotype 5107. On the E-Recruiting page there are three frield that already exist. Country, State and City these field also in infotype 5107 too. Country and State both are dropdown box. I have to set the default value for Country to 'USA' and State to 'AZ' where can i set this? The new field will display location "county" which the user will be able to select multiple locations. I know i would have to go PM01 to add the new field to the infotype 5107. But i'm missing the third that will allow me to do this. There's IT, IT Version, IT (i don't have this on my SAP Gui). I'm not sure what to do next after I created this new field. how can put this new field this the E-recruiting webpage?

Matthew,
You can enhance your infotype 5107 from tcode 'PPCI' not 'PM01'.
Check out this Custom Infotype Creation in ORG Management
Regards,
Ahmad

Add a new field to existing Table

Hi , We want to add a new field to existing table from ECC and populate historical data .
We have already extracted data from ECC to VBAK Table . We have to add a new field - Incoterms in HANA . This field exists in ECC .
Please guide.

Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj

Addition of New Fields to CG36VEN Transaction - Import of Vendor MSDS

Hi Guys,
I have a business requirement for addition of New fields (text field and check box) in the CG36VEN transaction (Import vendor MSDS) in SAP EHS.
(Something like in the attached screenshot )
Are there any User Exits/Enhancements points available for the same? (we tried checking but couldn't find any).
If no, should we copy the function group into a custom function group and make the changes?
Please suggest the best way forward. any pointer are really appreciated.
Regards,
Gaurish Dessai

Dear Gaurish
if you check the normal process to upload "pdf" files using SAP standard import you are able to create additional data (using a SAP standard class; but you can change that using a custom specific class) by standard without the need to "modify" screens etc. . I would prefer to do the upload in a "document" class and not to ESTDH as the use of a class is standard; but yes you can use append fields in ETSDH (or use custom driven own table); In e.g. DOC-X and similar interfaces you can download then the data from the class (e.g. as in your case for "reuse" in a different data base). PLease check SAP online help or the many threads which are related to the topic of "mass bulk download of pdf SDS/MSDS files (e.g. Bulk MSDS Download))
The "correct" (best solution depending on the real customer needs) solution depends a little bit on your further use of the "on top" data which you would like to upload (and the potential risk that after e.g. 6 months user would like to get a third, fourth etc. checkbox inthe screen).
E.g. the two check boxes could be implemented as "identifiers". The "pro" of this solution is this:
a.) you can execute easily inquiries in EHS database
b.) you can extract the identifiers easily (e.g. as part of an output variant or other similar options (combination of ALE with XI/PI)
Second option: you can generate an own EHS class as part of the property tree; then you can use as well inquiry options (and ALE or other options to download the data).
As mentioned before: the "best" option (near to the SAP standard) is to use a customer exit in Cg50 (check e.g. Customer Exits in SAP EHS MANAGEMENT
and these two exits as mentioned there:
C1G20001
EHS: Menu exit 1: Report management
Yes
C1G20002
EHS: Menu exit 2: Report management
Yes
One "disadvantage" of the transaction CG36VEN is that you can upload only one document in one run. Using the exists as mentioned you can generate a more "user friedly" option to do mass uploads as well (based e.g. on key files (similar to the "Standard option" but more user friendly)..
Using this option you are as well flexible to use own customer document classes (e.g. you can/could define per "document type" one class; e.g. for REACH exposure scenarios you can use a different class in comparison to SDS upload.
A well known shortfall of transaction CG50/CG54 is the limitation in the available search options. You could not select reports based on the "check" boxes in your screen (therefore if you use "append" fields for ESTDH there is very limited option available to sue an inquiry standard SAP function to select reports of a specific type)
Therefore in most cases it is better to change your process or your approach (how you would like to store the data); e.g. to store the check boxes data on spec level (e.g. as identifier) and then by using CG02 "switch" to CG54/CG50 transaction (which is now easily possible) to check the reports (and content of the reports).
C.B.

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

I am new in DART extract and wanted add the new field in Existing Segement

Hi ALL
I am new in DART extract and client is request us to add the new field in Existing Segment.
What is proceedure i need to follow to add the new field in existing segment.
Moderator: Please, post in proper forum

I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?

Add new loop field in custom infotype - error field .. not assigned to loop

Hi,
I have a task of adding a new loop field in a custom infotype screen 3000. Here, in the past there have only been the fields begin date and end date. I need to add a new field, so this is how I proceeeded:
1) I modified the screen 3000 in SE38, adding the field where I wanted and defining a loop.
Now, I get the syntax error : Field P9500-field is not assigned to a LOOP. LOOP...ENDLOOP must appear in PBO and PAI.
There must be something wrong in what I'm doing, can you please let me know a quick fix on this or how I can accomplish this in PM01? Please keep in mind that this is a custom infotype for SAP TEM, I can't see it in PA.
Best regards,
George

Not a nice solution but I had to do this quick and I'll correct it in the next days:
The old flow logic PBO code was:
LOOP.
    MODULE FILL_DYNPRO.
ENDLOOP.
If I wanted to insert here something like:
FIELD whatever
    MODULE dummy.
, I'd get stupid error messages like this other field is not in loop, endloop, then if I put that other field I'd get the error that the fields are in the same loop...
Wanting just to get this over with, I added the following code (after the initial loop):
LOOP.
    FIELD whatever
      MODULE FILL_DYNPRO."same module as above
ENDLOOP.
This was repeated in PAI.
This pretty much works out fine for the moment, I'll look for finer solutions in the week to come.
Thanks for the help, guys.
Best regards,
George

Problem adding a new field to existing BPS planning layout

Hi
I am new to BPS and planning
I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
In additional functions of adhoc package they have made setting as set to all possible char combination.
In this planning area all the selections are locked in planning level and package.
Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help with this as to how can i make this field input enabled.This is an independent characteristic.
Thanks
Panchan

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Addition of new field in VA02 and VA01 in additional data tab B

Hi,
I have added a new field called delivery date to additional data tab B in both tcodes va01 and va02. Now, while creating or changing a sales order, if the Sales group is I00 then this field should be filled up mandatorily. For va01 and va02 i have done all the required coding where all this is done on pressing the save button when we are in the additional data b tab.It would throw an error message if the date is wrong and a wrning if it is empty (provided sales group is I00). I did the coding in 4462 screen.
My requirement now is that if somebody doesnt go to the 'additional data b' tab n try to save the Sales order then also it should throw a warning or error stating that delivery date field should be filled up. Where exactly should i place the coding now? if it is screen 4900 then can someone suggest me at what place should the coding be done.
Regards,
Puja

Hi Puja,
Seems you have added the fields at item level in sales order and for this you must have appended the additional fields
in vbap table. So to validate these fields you can use USEREXIT_CHECK_VBAP available in MV45AFZB user exit include.
The fields you appended will be available in vbap structure, add your validation here or even in USEREXIT_SAVE_DOCUMENT_PREPARE available in MV45AFZZ which is called before saving the sales order.
Regards,
Pawan

Adding few new fields to Custom infotype already developed

Hi
I have a requirement to add new fields to already available custom infotype. I have to edit the PS structure and add few fields there and activate it. My question is, when I tick on "Generate Objects" after maintaining the PS structure, it will show pop up boxes asking whether to overwrite those objects already exists, shall I tick it or exit? Because the code is already written in the module pool for some validations,if I regenerate the objects, will the complete code will be erased?
Please guide me in this regard.
Thanks,
Pallavi.

Hi,
Yes you need to regenerate objects, for changes to reflect.
Since the objects are regenrated, the custom validation codes should get overwritten.
To be on safe side, you can copy this infotype to a dummy infotype and regenerate the code and check.

Adding new fields to existing cube

Hi all,
We have a cube with data, now we added 2 new fields to the datasource. And want to add two more fields in the Cube to correspond to the new fields. What would be the impact on the data that is already there in the cube? Can I go ahead and add the fields in the cube and start extracting data? What I want to know is what would be the implications in such a scenario?
Any insight or help would be appreciated and fully rewarded.
Thanks,
Mav

Hi,
At least from the experience I had there were no performance issues. The only issue would be in terms of the time taken to transport. The larger the amount of data ,longer the transport time.
You can continue extraction of data for those 2 fields from that point on. No need to empty the data from the cube and reload again. Only thing is that the data in the past for these 2 fields may not be mapped to the existing data in the cube. If you want to do that dump the cube and reload. Otherwise the data will be mapped from the time you start extracting the new fields with the data in the cube.
Cheers,
Kedar

Adding a new field to existing structure

HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advance

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Addition of new field in the lis standard structure

I want to bring a new field which is available in the standard structre of 2lis. By bringthis, i have to fill the set up table , so that this can be brought to the PSA. Since my PSA, ODS has already got data, i don't want to run the set up table. Do we have any user exit to fill the data for all new records as well as old records.

HI Pooja,
Tell me one thing, is that new field you have added in the Append Structure ? I mean have you done the enhancement.....
or is the field already existing the datasource.....but not mapped in the DSO level....and now you have added the new characteristic in the DSO.....and just want tol fill that field....
If the second case is true and the data for that field already exists in the DSO.........then you can just delete the data from the DSO and do a Full repair from the PSA......
If the first case is true that you have done the enhancement....then it means that PSA doesn't contain the data for the new field.........in that case there is no other alternatives........you have to fill the SEt Up table ...
Regards,
Debjani......

Addition of new fields and sub dields in ad hoc query

hey all,
hey friends i would like to know how to add additional fields and the sub fields in ad- hoc query.
i had tried sq02 and went on creating new field but it is nt adng there and no options of sub fields are visible.
note: i am entirely new to sap hr.. so plz try and help me out in a laymans language.

At the Date Field, there is 1 node call the Additional fields.
Then Right click the Additional field and choose create >> additional field.
Then enter the field name, description, Data type and length.
After that right click the newly created field name and choose code
Then enter some simple code.
E.g.
For IT2006 the table does not provide the quota balance. If order to display the quota balance we can create an additional field call ZBalance. Then at code section enter the code ZBalance = p2006-anzhl - p2006-kverb.

Addition of new fields to existing Infotype: Error in Quality Server.

Similar Messages

Maybe you are looking for