Additional Columns in ECM - Compensation Planning view

Hello
We have a requirement to hide some columns in MSS Compensation Planning view.
I know that this column framework can be configured using OADP.
But my issue is that, we wanted to hide the specific columns (like Amount) only for one compensation plan and not other  plans (all these plans are in the same category "Additional payments").
Can the column framework be made Compensation Plan specific?
Could anybody suggest me?
Thank you & Regards
Raghu Kolukuluri

Hi Saurabh,
I have similar requirement for ECM implementation that for a specific comp plan I want to display two columns otherwise not. You mentioned that you could achieve it via OADP; however I can't find any linkage between the comp plan and data view.
I can see standard data views (following and more)
MSS_ECM_APR_BON     Approval: Bonus
MSS_ECM_PLA_BON     Planning: Bonus
MSS_ECM_REV_BON     Planning: Bonus (Review)
And I believe If I change the view for MSS_ECM_*_BON; it will affect all the views related to bonus plans. I was able to add 2 columns there too.
Now question is -- Is it possible to give drop-down values to one of these columns ? e.g. my column is Status and I want to allow only 5 statuses, can I bring the drop-down in the portal without any WDJ application change ? I'd like to achieve it via config if possible.
At the column definition/config level in SPRO, I can see following:
Convers. Rout.
FM for Column Contents
FM from Column Framework
Service Key
Can I use any of these to achieve such drop-down?
Please let me know if you have any clue.
Thank you
Krupa Pancholi

Similar Messages

  • How to disable ECM Compensation Plans

    Hi people:
    We have an issue with the Compensation Planning ECM iView of the our MSS 6.1. We want to hide a couple of Plans (the tabs) from the current iView. We have tried with all the different parameters included on the iView, but we have not been able to modify anything apart from the columns groups or the columns assigned to the iView on the parameters
    We have reviewed all the Object and Data Provider tables but we have not found anything related to this of how to enable or disable the Compensation plans tabs from the ECM Compensation Planning and ECM Compensation Approval
    We have reviewed as well the Compensation Workset guides but apart from parameters to modify the navigation or the content of each Compensation plan, we have not found any reference which can guide us. We have tested the following parameters VIEWIDSAL, VIEWIDBONREG,VIEWIDBONOFF,VIEWIDLTI and play with them removing and changing the standard parameter ECMNAV,ECMBON,ECMLTI,ECMSAL based on the ODAP, but we have not found anything which can help us.
    Has anyone knows if it is possible and how to achieve this on the Portal?
    Kind regards
    Gonzalo Pérez-Prim
    Message was edited by:
            Gonzalo Pérez-Prim

    Hi Gonzalo,
    Each tab in ECM corresponds to a Plan as created for Enterprise Compensation Management in configuration.  Whether the tab appears or not depends on whether it is assigned to the Review also created in ECM.  The Program assignment will determine whether an employee is eligible for a particular Plan, but the name will appear on the tab but all entry columns will be blanked out. 
    We just completed introduction of ECM and configured 1 review item for 2007.  There were 6 plans each with a separate tab - Hourly Merit, Salaried Merit, Hourly Market Adjustment, Salaried Market Adjustment, Lump Sum Adjustment and a Summary tab.  The columns that appeared on each tab were configured in the Object and Data Provider and each one was different.  Both hourly and salaried employees appeared on all tabs, but no entry could be made in the Salaried tabs for Hourly employees and the same for Salaried in the Hourly tabs.  The Summary tab was custom designed and had all information about both hourly and salaried and provided overall department totals. 
    To remove the tabs, you must remove the plans from the review.  You did not explain which tabs or why, but if you wanted to separate the salaried tabs from the hourly, you would have to create two reviews and then select the plans you want to display in each.  You would use the features to indicate which reviews would be available for which employees.  The managers would then have two entries in MSS to select the reviews for the salaried employes or the reviews for the hourly.  As explained above, we combined them so we could have department totals including all employees.

  • Editable column in ECM(compensation) not possible,but what happens in EHP4?

    Hi all,
    I've been reading in the forum that it's not possible to create an editable custom column in the ECM Compensation and of course I haven't been able to get it.
    But, I'm working in MSS 6.0 EHP2, does anyone know if it is going to be possible to do this in EHP4?? I know that the funcionality of ECM in EHP4 has been increase a lot.
    Any news about it??
    Thanks,
          Juanjo

    I am a little confused because this is an editable region called "head" that makes changes to the footer.  I don't think i will be able to explain WHY this is so for a while, but at least i will be able to see what is wrong and give the solution.
    You are embedding a stylesheet in the editable region called 'head'.  That stylesheet sets the style for the element called "footer" by specifying the background image to be used.  It's quite straightforward.
    What was really freaky:  entering the url for the background image in the style sheet as "/path/to/your/image.jpg".  Lordy i didn't think that could be the literal thing i was supposed to enter!     
    It's not.  You were supposed to alter that to match the path from your site's root to the desired image.
    Where did you find this gem of information?
    It's just basic CSS, really.

  • Add link to new column in compensation planning plan screen

    Hi Gurus!
    I am in need of help in adding a new column to the Compensation Planning Screen for MSS portal (second screen or the PLAN screen).  I need to add a column which is already configured in SPRO for performance rating.  I am already able to show the column however I also need to make it clickable wherein the user will click and will be able to modify the performance rating on a pop-up screen.  After the modification, he can close the pop-up and will be back in the compensation planning screen. I checked and I can configure the service key in the columns to make it clickable but they all make use of Java Webdynpro.  By any chance, is there a way to use ABAP Webdynpro to achieve my requirement like passing the PERNR and opening a pop-up window?

    Dear,
    Before posting any threads plz search in SDN for ur reference below is one  link
    screen exit for VA01
    Cheers
    fareed

  • New salary is not updating in MSS Compensation Planning (ECM)

    Hi
    In MSS Compensation Planning (ECM) iView, when we are applying a percentage increase for a particular employee the new salary column is not updating when we press enter or recalculate. The value is changing intially when we press refresh property for the iView, for the next time the value is not changing even when we press the refresh also.
    Regards
    Suresh

    Hi Suresh,
    What is the solution..
    because we are also facing a similar issúe ..
    our new salary is same as the compensation amount....
    but what we are looking for is
    new salary = compensation amount +annual base salary
    Where do we do this?
    tks rgds
    g3

  • Number of rows to be displayed in Compensation Planning iView in ECM

    Hi Experts,
    I want to increase a number of rows to be displayed in the Compensation Planning iView in ECM from 5 to 10. How do I do that? Thanks!
    Anthony

    We can set the numnber of rows to be displayed by using the standard table UI of java web dynpro. Thanks!

  • MSS Compensation Planning Notes Column Stroing garbage

    Hi ,
    Notes column in Compensation Planning ( MSS 600 , EP 7)  when edited and  long text ( > 78 )is entered is storing garbage.
    I know the line/ row length of a the table communication the rfc is 78 fixed.
    The problem is that the code below is correctly cutting the text of lines of 78 each but then does not store the table with multiple rows only the top row gets over written and stored.
    Any ideas - how to add multiple rows to it ( the line highlighted ) -
    Hrecm00Text textList = new Hrecm00Text();
              String bufferText = "";
              int index = 0;
              if (noteText != null) {
                   while (index < noteText.length()) {
                        if (index + 78 < noteText.length()) {
                        bufferText = noteText.substring(index, index + 78);
                        } else {
                             bufferText = noteText.substring(index);
                        textList.setText_Line(bufferText);
                        index = index + 78;
                                              input.addText_Tab(textList);
                        bufferText = "";           
              } else {
                   input.setText_Tab(new Hrecm00Text.Hrecm00Text_List());

    Hrecm00Text is defined in Java Dictionary as structure . .. . of line text_line with length 78

  • ECM - Review Planning / Planning Overview (Compensation Approval)

    Hello Experts,
    I am looking for a resolution to a problem I am encountering when using MSS -> Planning ->  Review Planning (Compensation Approval) (mss 1.4, ep4).
    when launching the review planning webdynpro the following error messages are displayed:
    A fatal error has occurred. Please inform your system administrator
    No compensation review is assigned to your user
    The user is a chief, and is also a higher level chief from the original chief who submitted the planning.
    I have experiemented with the spro setting for User Interface Settings -> Define Attributes for Planning Overview
    where the all Org. Units have Eligible Employees has been tested with it checked and unchecked.
    additionally we ran the report for the respective org units to Prepare Organizational Units for Compensation Planning (RHECM_PREP_ORGUNITS_FOR_PLNG)
    Please let me know if you have any ideas?
    Best Regards,
    Michael

    >
    Michael L Pappis wrote:
    > I am not a 100% sure if the checkmark is Org. Units have Eligible Employees is working the way i thought.
    >
    > I tested with the checkmark on, and ran  the report to prep org units, it gave the me error when launching the approval screen.
    >
    > i tested with the checkmark off, and ran the report to prep org units, but the parent org unit did not have an elgible employee, so it gave the same error when launching the approval screen.
    >
    > i moved an elgible employee into the parent org unit, and ran the report again, and than it created the data in T71ADM_PROCESS.
    >
    > after this final step the webdynpro loaded with no error.  i'll have to do some more testing on this.
    so figured out the root cause of the problem and why the checkmark "Org units have elgible employees" did not work originally. 
    when running the report it is trying to find org units based on the compensation review effective dates.  In our case we left the end date of the review as blank.  this new report does not like blanks based on the way it selects the org unit.
    make sure you have an end date for your review in table V_T71ADM08.

  • Compensation Planning/Approval

    Hi,
    We are implementing a Compensation Planning/Approval on ERP 2005. We need to customize the standard functionality as per our requirements. We need to remove some fields from standard view and add custom fields.We have created some custom infotypes and function modules for the same. We have configured columns, column groups, dataviews etc..How do I link custom function module with columns of OADP to fetch data or save data to R/3?
    Appreciate your help
    Thanks,
    Kathy

    The OADP simply provides you with views of the org. data based on your config. So I am not sure what you mean by "save data to R/3"....the OADP does not do that. Your possibilities are two-fold...either the data selection side or the data display side.
    For data selection....
    In configuration for the "Define Rules for Object Selection" , you can configure it to use a function module instead of an evaluation path....per docs:
    =======================================================
    Function Module for Object Selection
    Use
    To enable the Object and Data Provider to display an organizational structure view, it must first determine the relevant objects. Therefore, you must define an object selection that is composed of object selection rules or a class for an object search. An object selection rule comprises an evaluation path together with an evaluation depth or a function module for determining objects.
    In this field, you store the name of the function module that can be used as opposed to the evaluation path to determine the relevant objects.
    =======================================================
    If it is not necessarily the data that is pulled but a specific column you want to change to display other data based on your pulled data, you can also use a custom FM at that point as well. In the "Define Columns" configuration, you have the option for :
    =======================================================
    Define Columns
    Use
    In this IMG activity, you create columns. In these columns, the user can display additional information about the objects you specified for the defined object selections.
    If the column content is to be determined in the backend system, enter a function module that is to get the column content.
    To create a function module of your own, use the function module HRWPC_CB_CONTENT in the standard system as a template. You must use this as a template since your function module must have the same interface as the function module in the standard system.
    If you want to reuse a function module that you have created for the Column Framework of the Personnel Management component, enter FM from Column Framework in this field.
    You can find the relevant function modules in Customizing for Personnel Management under Global Settings in Personnel Management -> Column Framework -> Define Your Own Columns/Change Column Group Text -> Define Your Own Column ->Column Group Definition (view T77COL).
    ========================================================
    Hope this helps!

  • Capacity and financial planning view in PPM 4.5

    HI,
    I am working on PPM 4.5 and would like to have some enhancements done in capacity planning and financial planning.
    Can someone suggest what are the webdynpro components to look out for ?
    Is it /RPM/UI_DASHBOARD ?
    regards
    abhishek

    Hi Amit,
    I'm using PPM 5.0. I have a requirement to Enhance the Financial Planning View. Where in I need to add an additional field(as a column).
    But I'm stuck up in the technical how go.!(.
    Do you have any idea on this enhancement? like, custom includes, BADI's etc..(I have got a BADI now /RPM/EX_FIN_PLAN, same you have mentioned in above post).
    Amit, kindly help in this regard.
    @Experts,
    Hi experts please look into this requirement & give your points.
    Rgrds,
    Santhosh

  • Get an additional column added to PWA Page which shows up the resource names

    When we got to Project center and open up the respective project.By default the Tasks Summary window opens up.
    Where in I can see the ID,Task Name,Duration,Start, Finish,% Complete,Work and Task State.
    In one of the request a user wanted us to get an additional column added to this which shows up the Resource Names.
    Note:
    In the project plan what we publish to the server we used to have a resource name column.
    Please let me know if it is possible to add a new column. 

    amavila --
    Your Project Server administrator will need to do the following:
    Log into PWA with administrator permissions
    Click the Server Settings link in the Quick Launch menu.
    Click the Manage Views link in the Look and Feel section of the Server Settings page.
    In the Project section, click the Task Summary view to open it for editing.
    In the Available Fields list, select the Resource Names column, and then click the Add button to add it to the Displayed Fields list on the right.
    Click the Save button.
    Keep in mind that only your Project Server administrators can perform the above steps.  Hope this helps.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • How to change default selection in compensation planning

    Hi experts,
    We have upgraded our portal to EHP1 sp04.
    I need to change the default selection which it currently shows in "Employee Selection" under
    Compensation Planning-->Compensation Planning.
    When a user clicks on Compensation Planning>Compensation PLanning> he comes in an iview with 4 steps:
    There is one "Employee Selection" scroll down view, I need the default to be "Direct Reports"
    http://rapidshare.com/files/308150359/DirectReports.jpg
    The default it shows is "Employees from organizational units", I need to change it to "Direct reports". Can someone tell me how I should proceed about it.
    Please guide me
    Regards,
    Rajat Sharma

    Hi,
    I have solved this issue.
    Go into SPRO>integration with other sap system>business packages>mysaperp>organizational structure view
    group organizational structure view.
    select mss_ecm_sel and change the nos. accordingly.
    thanks,
    Rajat

  • Custom list column not showing up in View Order by or Group by dropdown list

    Hi All,
    I have created a custom list with a custom column called "Description". Some items in the list do not have a description. What I wanted to do is create a view where the items with a description show first, and the items with no description are
    at the bottom of the list. I thought I could make a simple view that uses the Order by or Group by on the description column.
    The problem I am having is the description column doesn't show up in the dropdown list for either Order by or Group by within the custom view. Can someone please tell me why this happens and if there is anything I can do to rectify this problem.
    I hope you can help
    Colin

    Hi,
    I believe the "Description" field type is Multiple Lines of Text. Sorting doesn't allow in this field type. In order to do the sorting, you would require to create additional column like single line of text column (note that it supports only 255
    chars and require to truncate the data if more than 255) and update the data using event receiver or workflow. and do the sorting with that column.
    kmhsad

  • Compensation Planning Iviews in MSS

    Dear Team,
    From the R/3 end, the ful cycle for Compensation Planning is working.
    Comming to the MSS part in portal, although we find Iviews for Compensation Planning and Approval, these two pages display only blank page.
    Required Authorizations have been maintained. Please help me what else to be maintained
    Regards
    ...Sadhu

    Ya, Siddharth...SAP_ALL is maintained for this test user.
    I beleive authorization may restrict user to view Org Units or Employees, but in my case the whole page displayed is blank.
    What i feel is some technical config might be missing.
    Please let me know if any Services/ Resources  and PCD paths to be maintained. As these are standard Iviews, the standard services are available, but if any modifications required for this ?!
    Regards
    ...Sadhu

  • A additional column is appearing in the bom display transaction

    Dear Expert,
    I am facing a unique situation .Recently my system has gone through EHP 5 upgradation.When i am displaying the production bom for a particular material in your Quality client , i can view a additional column in the  GENERAL ITEM OVERVIEW  and the name of this column is  Function ID, but when  iam viewing the bom of the same material  in your production client , i cannot see this column.  I tried , but could not understand the reason for this discrepancy. Please help me in finding out the root cause of this   discrepancy.
    Thanks & Regards
    Hritesh
    Edited by: hritesh on Jan 12, 2012 7:26 AM

    Hi,
    Check below setings..
    Extream right side top corner  of CS02 (General Item Overview) - There will be table view ( Configuration) --> Click on that --> in the next window - Table Setings --> click on administrator (you should have authorizations to perform this function)..
    Check whether the "Function ID" is maintained as Invisible in your Productive System.
    Best Regards,
    Siva

Maybe you are looking for