Additional Dependent and Beneficiary Information

Hi,
Nav : Employee Self Service > Personal Actions > Dependents And Beneficiaries : update > Additional Dependent and Beneficiary Information
what is the DFF name or where/how can i add one more field to capture the Benifit Percent Share...
Regards,
Giridhar.

Hi,
Below are two DFF's which are used to enter Dependent & Beneficiaries:
Further Contact R'ship Information (Human Resources)
Add'l Contact Rel'ship Det's (Human Resources)
Just check whichever flex is applicable in your Case.
Regards,
Razi

Similar Messages

How to get Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information I want to create a Paid Books Account use apple ID

I was given this address from the Apple customer support team.
I have an active existing iTunes store account and use the same Apple ID for signing into my iTunes Connect Account that distributes Apps.
I have created some books using the iBook author and in order to distribute content on the iBookstore I have been told electronically that I need a new Apple ID and password that is different to iTunes store account which I have already activated and completed contracts, tax information and bank information valid until 2013?
I want to create a Paid Books Account using the same email address, tax information and bank information. This has been most frustrating, as I cannot get passed the sign in section and there is no contact person I can speak to. I was of the understanding the iTunes connect account and the Developer programs which I paid good money for is all what I needed to be paid for selling iBooks on the iBookstore???
I only have one email address and wish to also use it for the Paid Books Account. I have books ready to be exported and published.
I am also having trouble locating and downloading iTunes Producer. I understand I need to have the Paid Books Account active to access the iTunes Producer program. Please help.
See additional information below:
What device did you use to connect to the store? Mac computer
Which operating system is installed? Mac OS X v10.7.x
What version of iTunes is installed on your computer? iTunes 10.6
Choose the iTunes Store or App Store for your country: Other
Please select your country: Australia

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

Books transferred from Itunes to Ibooks loses author and category information.

How can I get author and category information for pdfs to transfer from itunes into the ibooks app on Mavericks? I just transferred my book collection from itunes to the ibooks app and have lost all the author and category information that I entered on all my pdfs. Do I now have to re establish this info in ibooks app? Ibooks doesn't appear to allow for creation of new categories or editing of author's name when it assigned unknown to all my pdfs. My book library appears to have been seriously downgraded by this "upgraded" os.

totally agree with you. Exactly the same here.
you can't re-establish this info in iBooks because it doesn't allow you to do it. No editing and organising at all (except from moving into a section of your choice).
In addition to no editing/changing, no backup/restore, no books/pdf location settings (all placed in user-library), etc. ... simply a complete disaster.
For me a killer-criteria to use OSX Mavericks! That forces me to move back to OS X mountain lion!
What did the Apple iBooks dev team think when creating this application? Come on this can't be true!

Image gallery approach for additional details and add to cart option?

With efficiency and minimalist downloads for smartphone users I would appreciate advice on a product image gallery.
Currently I have an intro page and other simple information pages. My gallery pages ( four distinct pages for different leather goods) need either a pop up or a link to a new page for additional details and an option to add to cart.
Within the image gallery, How should I link each photo to the new detail/cart page? Can clicking the image itself be the action or do I need a button?

I made a mistake. I think I got it right this time. The pop up of the title box works but the images are all gone.
<!DOCTYPE>
<html>
<head>
<meta charset="UTF-8">
<title>Lapinel Arts Leatherwork</title>
<meta name="viewport" content="width=device-width; initial-scale=1.0; maximum-scale=1.0; user-scalable=0;">
<link href='http://fonts.googleapis.com/css?family=Overlock:400,700|Simonetta:400,900|Marcellus|Junge' rel='stylesheet' type='text/css'>
<style>
box-sizing: border-box;
body {
margin: 0;
padding: 0;
background: #fff;
font: 14px/20px 'Lucida Sans',sans-serif;
.wrap {
overflow: hidden;
.box {
float: left;
position: relative;
width: 25%;
text-align: center;
margin-bottom: 24px;
.boxInner {
position: relative;
text-align: center;
margin: 0 12px;
overflow: hidden;
img {
max-width: 100%;
.titleBox {
position: absolute;
bottom: 0;
width: 100%;
margin-bottom: -70px;
background: #000;
background: rgba(0, 0, 0, 0.5);
color: #FFF;
padding: 10px;
text-align: center;
-webkit-transition: all 0.3s ease-out;
-moz-transition: all 0.3s ease-out;
-o-transition: all 0.3s ease-out;
transition: all 0.3s ease-out;
.titleBox h2 {
font-size: 16px;
margin: 0;
padding: 0 0 5px 0;
.titleBox a {
text-decoration: none;
color: #fff;
.boxInner:hover .titleBox {
margin-bottom: 0;
@media only screen and (max-width : 768px) {
.box {
width: 50%;
margin-bottom: 24px;
@media only screen and (max-width : 480px) {
.box {
width: 100%;
@media only screen and (max-width : 1290px) and (min-width : 1051px) {
   /* Medium desktop: 4 tiles */
   .box {
      width: 25%;
      padding-bottom: 25%;
</style>
<style>
section, header, nav {
display: block;
    box-sizing: border-box;
body{
font-family: 'Marcellus', normal;
background-image: url(DRA-042010-LeatheryTexture-MBFT.jpg);
font-size: 90%;
line-height: 140%;
color: #555;
margin: 0;
padding: 0;
background-color: #FFF;
#hover-image {
background-color: #cfc6b0;
text-align: center;
img {
max-width: 100%;
height: auto;
.container {
width: 85%;
max-width: 1000px;
margin: 0 auto;
color: #000;
header h1 {
font-size: 300%;
line-height: 150%;
text-align: center;
letter-spacing: 4px;
padding: 20px 0;
color: #000;
font-weight: bold;
/* top level navigation */
nav {
    background-color: #E5E4E2;
nav ul {
display: block;
text-align: center;
margin: 0;
padding: 0;
nav li {
margin: 0;
padding: 0;
display: inline;
position: relative;
nav a {
    display: inline-block;
    text-decoration: none;
    padding: 10px 25px;
    color: #000;
nav a:hover {
    background-color: #cfc6b0;
    color: #000;
nav span {
display: none;
/* droplist navigation */
nav ul ul {
position: absolute;
z-index: 1000;
left: 0;
top: 2em;
background-color: #E5E4E2;
text-align: left!important;
display: none;
nav ul ul li a {
display: block;
width: 12em;
border-top: 1px dotted #ccc;
.about {
padding: 0 8%;
margin: 0 auto;
text-align: center;
background-color: #E5E4E2;
.about h2 {
    font-size: 260%;
    line-height: 200%;
    margin: 0;
    padding: 0;
    color: #000;
.about p {
font-size: 110%;
line-height: 150%;
margin: 0;
padding: 0 0 20px 0;
.productsWrapper {
background-color: #000;
overflow: hidden;
padding: 30px 25px;
.product {
float: left;
width: 25%;
padding: 12px;
text-align: center;
color: #fff;
.product img {
border: 1px solid #fff;
.view_details {
text-decoration: none;
display: inline-block;
padding: 15px 20px;
border-radius: 6px;
border: 1px dotted #ccc;
color: #555;
background-color: #fff;
.view_details:hover {
background-color: #E5E4E2;
#mobileTrigger {
padding: 10px 25px;
font-size: 120%;
display: none;
color: #000;
footer {
clear: both;
background-color: #cfc6b0;
padding: 30px;
color: #fff;
text-align: center;
overflow: hidden;
footer a {
text-decoration: none;
color: #000;
    float: left;
    width: 33.33%;
    color: #000;
    border: #000
.footerBox {
    float: left;
    width: 33.33%;
    color: #000;
@media screen and (max-width: 768px) {
    .container {
width: 100%;
.product {
width: 50%;
#mobileTrigger {
display: block;
text-align: right;
nav ul {
display: none;
nav li {
display: block;
text-align: left;
nav a {
display: block;
font-size: 120%;
border-top: 1px dotted #ccc;
nav span {
display: inline-block;
float: right;
font-size: 130%;
/* droplist navigation */
nav ul ul {
position: static;
nav ul ul li a {
width: 100%;
@media screen and (max-width: 480px) {
.product {
float: none;
width: 100%;
body,td,th {
font-family: Marcellus, normal;
#copyright {
color: #000;
font-weight: bold;
</style>
<script type="text/javascript" src="http://lapinelarts.com/JS/jquery-1.11.2.min.js"></script>
<script type="text/javascript" src="http://lapinelarts.com/JS/jquery.cycle2.min.js"></script>
<link rel="stylesheet" href="http://maxcdn.bootstrapcdn.com/font-awesome/4.3.0/css/font-awesome.min.css">
<script>
$(document).ready(function() {
//activate mobile navigation icon when window is 768px
$('#mobileTrigger').css('cursor','pointer').click(function() {
$('#mobileTrigger i').toggleClass('fa-bars fa-times');
$('nav ul').toggle();
// show main desktop navigation onresize/hide sub navigation
$(window).on('resize', function(){
var win = $(this); //this = window
if (win.width() > 768) {
$('nav ul').show();
$('nav ul ul').hide();
//listen for navigation li being clicked
$('nav ul li').click(function() {
$(this).find('ul').slideToggle();
//toggle font awesome icons
$(this).find('i').toggleClass('fa-bars fa-times');
//events if window is less than 768px
if ($(window).width() < 768) {
//stops submenu sliding up when mouse leaves mobile
$('nav ul ul').show();
else {
//activate desktop submenu on hover
$('nav ul li').mouseenter(function() {
$(this).find('ul').slideToggle();
//toggle font awesome icons
$(this).find('i').toggleClass('fa-bars fa-times');
//desktop submenu slides up when mouse leaves ul/li
$('nav ul ul').mouseleave(function() {
$(this).slideUp();
$('nav ul li').mouseleave(function() {
$(this).find('ul').slideUp();
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<style type="text/css">
</style>
</head>
<body onLoad="MM_preloadImages('810_0776_smaller.jpg')">
<header>
<h1>LAPINEL ARTS LEATHERWORKS</h1>
<nav>
<div id="mobileTrigger"><i class="fa fa-bars"></i></div>
<ul>
<li><a href="#">ABOUT US</a></li>
<li><a href="#">PROCESS</a></li>
<li><a href="#">PRODUCTS<span><i class="fa fa-bars"></i></span></a>
<ul>
<li><a href="#">PURSES</a></li>
<li><a href="#">POUCHES</a></li>
<li><a href="#">TOTES</a></li>
<li><a href="#">WALLETS</a></li>
</ul>
</li>
<li><a href="#">CART</a></li>
<li><a href="#">CONTACT</a></li>
</ul>
</nav>
</header>
<section class="about">
<h2>PURSES</h2>
<p>There are several styles and sizes of purses available. Custom orders can be arranged but most of these purses are unique and with limited runs of art styles.</p>
<p>Please click on the detail button for larger and additional views and the opportunity to add the item to your cart.<strong></strong></p>
</section>
<div id="hover-image">
<div class="wrap">

<div class="box">
<div class="boxInner">
<img src="http://oddiant.poatemisepare.ro/wp-content/uploads/Viceroy-Butterfly-Limenitis-archippus.j pg" />
<div class="titleBox">
<h2>Butterfly</h2>
<a href="http://www.bbc.co.uk">View Details</a>
</div>
</div>

</div>

<div class="box">
<div class="boxInner">
<img src="http://oddiant.poatemisepare.ro/wp-content/uploads/Viceroy-Butterfly-Limenitis-archippus.j pg" />
<div class="titleBox">
<h2>Butterfly</h2>
<a href="http://www.bbc.co.uk">View Details</a>
</div>
</div>

</div>

<div class="box">
<div class="boxInner">
<img src="http://oddiant.poatemisepare.ro/wp-content/uploads/Viceroy-Butterfly-Limenitis-archippus.j pg" />
<div class="titleBox">
<h2>Butterfly</h2>
<a href="http://www.bbc.co.uk">View Details</a>
</div>
</div>

</div>

<div class="box">
<div class="boxInner">
<img src="http://oddiant.poatemisepare.ro/wp-content/uploads/Viceroy-Butterfly-Limenitis-archippus.j pg" />
<div class="titleBox">
<h2>Butterfly</h2>
<a href="http://www.bbc.co.uk">View Details</a>
</div>
</div>

</div>

</div>

<footer>
<div class="footerBox"><a href="mailto:[email protected]">EMAIL CATHY </a></div>
<div class="footerBox"><a href="https://www.facebook.com/LapinelArtsLeatherwork"> FACEBOOK</a></div>
<div class="footerBox">COPYRIGHT 2015</div>
</footer>
</div>
</body>
</html>

BPM Collect Message dependent AND time dependent

Hi
I have a IDOC to file scenario where I have to collect all the IDOC until I receive a stop IDOC.
Once the End collect IDOC is received I have to do a n:1 transformation and write the file to the FTP.
The problem is, at times the IDOC which is suppose to end the collect loop gets stuck in ECC R3 system.
So Im wondering If I can do something like say, we have two options inside BPM both time dependent and message dependent.
In this case which ever comes first (the Stop/END IDOC or the Time say 3 mins) will end the collect process.
Can anyone pls suggest will it work and if so what are the additional steps I have to introduce in the BPM.
Pls advice.
Right Now these are the steps in the BPM Collect Message dependent.
1. Block (I have used correlation)
2. Fork inside the block
3. Fork branch one has a look with end condition as 1=1; then a receive step and a container operation inside the loop.
4. Fork branch two receives the end collect idoc.
5. Transform step outside the block.
6. Send step.
Thanks
Prasanna

Hi Abhishek/ Raj
Thanks!!
I have done the changes let me confirm after testing it once. In the mean time I have one more question regarding the same BPM, as I have mentioned in the first post, the BPM contains the 6 steps mentioned but the the 6th step is inside another block (Block2).
The steps 1 to 4 are inside Block1.
The step 5 ie the transformation step (n:1) is in between the Blocks ie not inside any block (hope im not confusing).
The second block is for sending the file to the FTP and based on the acknowledgement (transport level) I have to send an email.
So Block2 already contains a deadline branch, it is to wait for the positive acknowledgement for say 3 mins and send the error email if incase we dont get positive ack within the time limit.
My doubt is,
1. Is it the only way (having two block and two wait steps) to achieve this.
(one block for collecting and one block for ack)
2. Is there any way I can have a single Block in the BPM insted of two. If so what are the steps.
Having single block, Will improve anything??
Thanks
Prasanna

Additive Cost and Variance Calcultion

We started using Tcode CK74N to enter additive costs for certian materials. I did the configuration needed in the costing variant and added a cost element for additive costs in the cost component structure.
Everything is working fine, when we run CK11n for a material that already have an additive cost estimate, the additive costs are being picked up and included in the cost estimate. if we mark and release the cost estimate the additive costs are being reflected in the new standard, so far so good.
My question is around the variance postings that happen once we enter a production order and settle the variance at period end.
lets look at this example
Assume the following:
Material X current standard = $100
Order X quantity produced =10 cases
Material X NEW standard after negative additive cost =$80
Scenario 1 (no additive costs) the total debits (Actual postings form material consumption and activity confirmation) to a the order = $900
The total credit was $1000 (standard*quantity produced) , a $100 in variance will occur, and the posting at settlement will be to Debit the price difference account and to credit the cost of sales account for $100. This is the normal case
Scenario 2 : We included a -$200 of additive costs for that material in the standard (new Standard is 80) , the credit to the order will be $800 instead of $1000 , which will make the variance -$200 and the posting currently is to DR cost of sales and credit price difference account for $200
The business and Based on scenario 2 wants to automatically generate a posting to the ACTUAL side of the production order equivalent to the additional variance caused by additive costs? which will put the variance back at 100.
They would like to see a credit to the cost element used in the cost component structure to book additive costs. and the reminder of the variance 100 in our example should continue to be booked to the same price different account .
If this is possible and right to do? what account should be used to offset this credit that being proposed to the additive cost element ? Because I assume that a new FI document should be created to record the credit?
Thanks for your help

Hey,
It depends a little upon the settlement rule of your process/production order.
If you are settling to the material (MAT), the price difference will only be accounted for with one line, without separation between difference coming from additive costs and other differences.
If you are settling not via within CO, you maybe have the possibility the way you settle, but I can not see how you can use such a logic in a settlement process.
What I would do, is to create a custom reposting program, which reposts the additive cost difference separately, after which the normal settlement can take care of the remaining difference.
Regards,
Koen

Visual C++ 2010 IntelliSense and browsing information is not available

Hello, I've just intalled visual studio 2010 and faced the issue with C++ projects: when I create a new console application or win32 project I see the message:
"An error occurred while creating or opening C++ browsing database file z:\test\test.sdf. IntelliSense and browsing information will not be available for C++ projects.
Ensure that Microsoft SQL Server Compact 3.5 is installed and that no other applications are accessing the file. If this problem persists, delete the file and reopen the solution".
In the list of programs I see SQL Server Compact 3.5 SP2 ENU and SQL Server Compact 3.5 x64 ENU installed:
And .sdf file doesn't exist so it is nothing to delete or share with another application. I've already tried to repair Visual Studio via control panel, but the problem still persists.
I'm using Windows 7 Ultimate x64 build 7600 and visual studio 2010 ultimate x86.

Hi Lanamelach,
It is support to work. I don’t believe it is an issue with SQL server installation. One thing I’ m not clear is what your “z”
folder is. Does this desk need additional account rights (e.g. administrator) to access? Try to run your vs2010 as Administrator or create a new object to any other local folder.
Cheers
Yi Feng Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

What do I do when I have just signed up for PS CC & LR5, and am informed my Vista won't support it?

What do I do when I have just signed up for PS CC & LR5, and am informed my Vista system won't support it?

From: http://www.adobe.com/products/photoshop/tech-specs.html
System requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
1GB of RAM
2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡
I know it's an "I told you so", but you really should have researched it before making the purchase.

HT203167 I had a glitch in my phone and all information was lost?

I had a glitch in my phone and all information was lost. I even had to rename my phone. I still use the same email and have ALL of the receipts sent to that email of previous song purchases. I would like them back. Apple says I have to repurchase?

Depending upon what country that you are in (and whether they are still in the store) you might be able to re-download them via the Purchased tab in the iTunes store app on your phone. If you are not in a country where music can be re-downloaded then do you have a copy of them on your computer's iTunes or on your backup of your downloads that you can use to resync them ? If not then only iTunes Support could potentially grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
You should be able to re-download apps via the Purchased tab in the App Store app, and ibooks via the Purchased tab in the ibookstore in the iBooks app.

List of client dependant and independent

Hi All,
Can any one let me knw the list of objects which are client dependent and which are not.
Thanks,
Vibha

Hello Vibha
The following list shows the client-dependent repository objects:
LIMU     FSEL     Field Selection
LIMU     VARI     Report Program System Variant
R3TR     COC1     CO: Cost Centers
R3TR     COC2     CO: Activity Types
R3TR     FORM     SAPscript form
R3TR     LODS     HRDSYS: Logical information object client-dep. table E SYST
R3TR     PCYS     HR: Transport standard personnel calculation rules
R3TR     PHDS     HRDSYS: physical information object client-dep. table E SYST
R3TR     SBNL     Logical Information Object for BDS
R3TR     SBNP     Logical Information Object for BDS
R3TR     SBNR     BDS: Relationship Between Information Objects
R3TR     SBPL     Logical Information Object for BDS: Bid Invitation
R3TR     SBPP     Physical Information Object for BDS
R3TR     SBPR     BDS: Relationship Between Information Objects
R3TR     SBRL     Logical Information Object for BDS
R3TR     SBRP     Physical Information Object
R3TR     SBRR     BDS: Relationship Between Information Objects
R3TR     SBSL     Logical Information Object for BDS
R3TR     SBSP     Physical Information Object
R3TR     SBSR     BDS: Relationship Between Information Objects
R3TR     SBTL     Logical Information Object for BDS
R3TR     SBTP     Physical Information Object
R3TR     SBTR     BDS: Relationship Between Information Objects
R3TR     SBWL     Logical information object for BDS
R3TR     SBWP     Logical information object for BDS
R3TR     SBWR     BDS: Relationship between information objects
R3TR     SRHL     SRM: Hierarchical Lists
R3TR     SRLD     Language-Dependent Client-Specific Retrieval Index Objekt
R3TR     STYL     SAPscript Style
In contrast to client-independent repository objects which can be imported into any client these objects must be transported into their specific target client.
Regards
Uwe

How to get cpu and memory information by Java?

I'm trying to write a java program to get the CPU and memory information and statistic of a desktop computer. Is it possible to capture this kind of information by Java, if yes, which classes are used?
Thanks a lot.

You can get memory info about the VM and not about the OS.
These things are inherently OS-dependent. Chances are bad there is a (pure) Java solution for this.

Urgent:Why Script is cliend dependant and smartform is not client dependant

Hi all,
Can any one pls tell me why script is client dependent and smartform is not client dependant.
<b>Please give some real time examples in brief</b>
regards
tapu

Hi
DIFFERENCE BETWEEN SMARTFORMS AND SAPSCRIPTS ARE:
1. script is client dependent one while smartform is client independent.
2. In scripts we have to write print program while in smart forms it is not necessary.
3. In scripts we can print background logo while in smartforms we cant print background logo
4. In scripts we have 99 main windows while in smartforms we have only 1 main window.
5. In scripts we should write paragraph format otherwise we cant execute program while in smartforms no need to create paragraph formats .
6. In scripts we can print the text in only two character formats.
while in smartforms we can do with more.
7. In scripts we dont have line types while in smartforms we have linetypes.
8.Multiple page formats are possible in smartforms which is not the case in SAPScripts
9.It is possible to have a smartform without a main window .
10.Labels cannot be created in smartforms.
11.Routines can be written in smartforms tool.
12.Smartforms generates a function module when activated.
SAPscript technology is based on a mainframe product from the 1980s, while Smart Forms have only been around since (roughly) 2001. With that sort of time gap, there are bound to be significant differences between the two tools. Client dependence is a fundamental one. Although SAPscript has had some incremental improvements over time, its forms have always been -- under the hood -- relatively ...
also refer
difference between smartforms and scripts
Diff betwen Scripts & smartforms
advantages of smartforms over scripts
Whenever a smartform is created, a funciton module gets generated. So, we can access the smartform in different clients. But in case of scripts, it is not so.. So, scripts are client dependent.
Smart Forms are implemented using the Function Module SSF*, and all the logic lies in the FM. Function Modules are client independent objects, so Smart forms are also client independent
SAP Scripts are the Layout Forms that you design and there are aviable in the client in which you have created them, for making them available you have to copy across the clients.
Because, Sapscripts are saved in ITF format as text in client dependant tables STXH and STXL. smartforms are not saved in client dependant tables and visible across clients.
SAPscript technology is based on a mainframe product from the 1980s, while Smart Forms have only been around since (roughly) 2001. With that sort of time gap, there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time, its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports; if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean. Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
I suspect several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
<b>Reward points for useful Answers</b>
Regards
Anji

Saving InCopy Story with Font and Style information...

Dear All,
Can anyone can shed any light on an InCopy story export problem I'm having?
I've got two versions of a function in a shared library, one for CS4 and one for CS5, which is used for both InCopy and InDesign.
The story export works okay and normally outputs the font and style information which is used by the story.
I've just added code to include all font and style resources dependent on a system setting.
The CS4 version works fine and I get a satisfying amount of file bloat if I turn the option on.
The CS5 version works as expected in InDesign but not when it's called from InCopy.
In fact if I turn the setting on in InCopy I get no font information at all, if I turn it off then I get the font info used by the story.
The call to SetInCopyInterchangeExportOptions returns kNoError(nil), so I imagine it's worked...
Is there anyway I can trace what's going on in the export in InCopy.
Is this the right call to acheive my aim?
Thanks in advance for any help forthcoming.
Regards
Caerwyn
#if (CREATIVE_SUITE_VERSION == CS4)
ErrorCode PrSnippetUtils::ExportInCopyStory( IPMStream *s , const UIDRef& storyUIDRef )
    ErrorCode    nResult = kFailure;
    Utils<IINXExportOptionsUtils> wsExportOptions;
    if ( !wsExportOptions )
        return kFailure;
    bool16 oldIncludeGraphicProxyData = wsExportOptions->GetOutputInCopyGraphicProxyData();
    bool16 oldIncludeAllResources = wsExportOptions->GetInCopyIncludeAllResources();
    InterfacePtr<IInCopyInterchangeExportOptions> storyExportOptions( storyUIDRef, UseDefaultIID() );
    if ( storyExportOptions )
        wsExportOptions->SetOutputInCopyGraphicProxyData( storyExportOptions->GetIncludeGraphicProxyData() );
        wsExportOptions->SetInCopyIncludeAllResources( SaveAllStoryResources() );
    INXOptions options = kINXExpanded;
    nResult = Utils<ISnippetExport>()->ExportInCopyInterchange( s, UIDList( storyUIDRef ), options );
    // restore export options
    wsExportOptions->SetOutputInCopyGraphicProxyData( oldIncludeGraphicProxyData );
    wsExportOptions->SetInCopyIncludeAllResources( oldIncludeAllResources );
    return nResult;
#endif
#if (CREATIVE_SUITE_VERSION == CS5)
ErrorCode PrSnippetUtils::ExportInCopyStory( IPMStream *s , const UIDRef& storyUIDRef )
    InterfacePtr<IWorkspace> ws(PrIDContextUtils::GetExecutionContextSession()->QueryWorkspace());
    if ( !ws )
        return kFailure;
    InterfacePtr<IInCopyInterchangeExportOptions> wsExportOptions( ws, UseDefaultIID() );
    if ( !wsExportOptions )
        return kFailure;
    ErrorCode    nResult = kFailure;
    UIDRef    wsUIDRef = ::GetUIDRef( ws );
    bool16 oldIncludeProxies = wsExportOptions->GetIncludeGraphicProxyData();
    bool16 oldIncludeAllResources = wsExportOptions->GetIncludeAllResources();
    InterfacePtr<IInCopyInterchangeExportOptions> storyExportOptions( storyUIDRef, UseDefaultIID() );
    Utils<IInCopySharedUtils> iInCopySharedUtils;
    // set workspace export options
    if ( storyExportOptions && iInCopySharedUtils )
        bool16 bIncludeProxies = storyExportOptions->GetIncludeGraphicProxyData();
        bool16 bIncludeAllResources = SaveAllStoryResources();
        nResult = iInCopySharedUtils->SetInCopyInterchangeExportOptions( wsUIDRef,
                kTrue, bIncludeProxies, kTrue, bIncludeAllResources );
    nResult = Utils<ISnippetExport>()->ExportInCopyInterchange( s, UIDList( storyUIDRef ) );
    // restore workspace export options
    if ( iInCopySharedUtils )
        iInCopySharedUtils->SetInCopyInterchangeExportOptions( wsUIDRef,
                kTrue, oldIncludeProxies, kTrue, oldIncludeAllResources );
    return nResult;
#endif

That is a sign that your preference files are becoming corrupt. Something is wrong with your system if this is happening regularly.
Bob

Wavelet transform scale and time information

Hi there -
I am using the wavelet transform for a non-stationary signal. I am not having trouble getting the coefficients from the transfrom but is there I way I can find the scale/frequency and time information from just the wavelet VI. I see no way I can get at this information. Also, I am pretty certain Labview uses the DWT when computing the transform but does Labview have the option to do the CWT?
The reason is because I want to plot time vs. frequency vs. amplitude and I need all three to do it properly.
Thanks for your help,
Cameron

Hi, Cameron.
This screenshot shows one DWT and one CWT VI, and you'll notice that the CWT has an output called scale info which contains the time information and the scale (frequency) information. (In addition, LabVIEW has several other wavelet VIs.)
If this doesn't answer your question, please let me know. Have a nice afternoon!
Message Edited by sarahk on 08-16-2006 03:59 PM
Sarah K.
Search PME
National Instruments
Attachments:
scale info.JPG ‏37 KB

Payroll: Beneficiary Information: No Benefits

Hi
We are implementing payroll and want to store Beneficiary Information for Some of the Benefits (Retirement Schemes, insurances etc...). We do not have Advanced Benefits/ Standard Benefits Implemented. Where can we store Beneficiary Information.

You can use People Group Flexfield to store the details.

Additional Dependent and Beneficiary Information

Similar Messages

Maybe you are looking for