Additional Fields in Custom in HR Infotype

Hi All,
I have added Benefit Salary field to already existing infotype . I have assigned it to field group Insurance Plan and added code in the field at END OF SELECTION (After List ) event . I can see Benefit Salary in Debug mode in the Technical Name of created field . However this value is not being passed to the Output .
Please let me know if I am missing out any configuration.
Regards,
Sachin

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Similar Messages

HELP CREATING ADDITIONAL FIELDS WITH DROPDOWN IN STANDARD INFOTYPE

HI ALL,
I AM IN ABAP-HR.
I HAVE 2 THINGS 2 ASK MY FRIENDZ..
1). I WANT TO ENHANCE STANDARD INFOTYPE...
I WANT TO PUT ADDITINAL FIELD WITH DROPDOWN...
I CAN PUT ADDITIONAL FIELD BUT I DONT KNOW HOW CAN I DO WITH DROPDOWN...
2).
OTHERTHING I WANT TO CHANGE THE TEXTFIELD OF STANDARD INFOTYPE..
I MEAN 2 SAY CHANGE TEXT 'BIRTHDATE' TO 'DATE'..
CAN U PLZ HELP ME OUT 4 THIS....
WAITING 4 FAVOURABLE REPLY..
BBYE..

Hello Bhumit,
1) to check how to bring values to a dropdown please refer the standard demo report programs in se38
a)DEMO_DROPDOWN_LIST_BOX
b)demo_dynpro_dropdown_listbox.
2)We need to understand that if the field label 'BIRTHDATE' is from a standard screen then the approach is to go to that particular screen ...delete the text and put our own text there as 'DATE' ..otherwise if the field is a custom field we can change the name in the field level or domain level
Pls check,revert and reward if helpful
Regards
Byju

EHP5 ESS - Add Additional fields from custom infotype on Personal Data

Hi Gurus
I am able to launch the Personal Information screen under Personal Profile
I will need to add more fields on the Personal Profile --> Personal Data section
I have added the infotype in V_T7XSSPERSUBTY
I am not sure if I will need to do some configuration GenIL Model Editor
Is BADI (Enh. Imp) HRESS_PER_CONFIG_KEY relevant to adding fields to the screen?
Please guide how to go about doing this
Thanks in advance

for adding a infotype and fields you need to do this
1. Customizing the Fields in Overview Screens
http://help.sap.com/erp2005_ehp_05/helpdata/en/77/804c18e1844944b7f8baf5
3159be78/content.htm
2. Configuration of Personal Profile Services
http://help.sap.com/erp2005_ehp_05/helpdata/en/3a/fe6eac579d4a9ead651d77
9a2dbd23/content.htm
3. Personal Profile application Documentation
http://help.sap.com/erp2005_ehp_05/helpdata/en/14/60cd56b1514ae5aa811d2a
a4a59de3/content.htm
In EhP5 ESS Personal Profile application, in order to change the
Address overview page fields, you need to adapt the Address component
configuration HRESS_CC_PER_OVR_ADDRESS_XX.
Note: In EhP5, ESS screens are based on Floor Plan Manager for
WebDynpro ABAP Generic UI Building Block concept. To configure
overview page fields we no longer use 'Determine Fields for Business
Card on Area Page' View instead of that we adapt the FPM configurations.
In the standard delivery in the Overview Page, always international
Address is displayed and in the edit screen based on the country
selection (Foreign Address scenario), corresponding country screens
are displayed.
Note: We always show international address screen in overview page in
order to support Foreign Address scenario.
If you want to chanage the fields in the Address overview page fields
then adapt the Address component configuration.

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Additional columns in customer search help

Need to add 5 additional fields in customer search help. The problem is i have to fetch data from ADR2 (active telephone and mobile number) ADR6 active email id. In table condition i have mentioned kna1-adrnr = adr2-adrnr, kna1-adrnr = adr6-adrnr.
So the search help is displaying only the record which is having adrnr number in adr2 and adr6. but the client wnat to display all the kunnr irrespective whether they are having mail id or telephone number. How to achieve it???
Is it is possible to add columns thru search help exist.
regards
Mullai

Create a copy of VTBAA and append your fields...

Additional field added in Infoset unable to use as a selectable field

I added 2 fields as additional fields to the Organizational Assignment infotype in a PNP Infoset that I created via SQ02. When I select the infoset to build a query via adhoc query the fields are listed in the Org Assignment infotype and available for output but are not available as a selection field. There is no check box under the Selection column, only a checkbox under the output column.
How do I make the added additional fields available as a section field as well as an output field.

Solution: in ad hoc query select Extras > Switch off object selection

How to drag out additional field in document printing in B1

Hi all expert,
My customer need additional field or information to be show at the document printing window in standard B1. Example like customer name or user define field for warehouse.
The standard B1 document printing is limited with the form setting is disable. User wanted additional information like printing status, warehouse(using user define field) , customer name able to show out on the document printing window screen.
Any idea about it? How can i to do it besides using SDK? If using SDK, what is the code i should write?
Can you give some sample code?
Regards,
Eric Tan

Hi all friends,
My question still un-answered yet. I think i have to clarify here.
What i mentioned is when user go -> Sales A/R -> Document Printing, select A/R Deliveries. A list of A/R Deliveries display in the windows form.
There is only limited field available in the windows form. User now wanted additional field like customer name & warehouse appear also at the document printing form. But the form setting for this windows is dissable.
I know we can done it using the PLD. But..Can we add in the information like customer name & warehouse code in the document printing form before print out. User need this information to control which warehouse A/R deliveries note have to print out. Example we have 10 deliveries order, it may be need delivery order 1,3,5,8 to print out.
Thanks. Hope you guy can help.
Regards,
Eric Tan

CRM Middleware - Additional fields

We are performing an initial load of Customer Master from R/3 to CRM and would like to include two new fields maintained in AUSP (characteristics table) in the download. I understand that we would be using the business object CUSTOMER_MAIN. Does anyone know how to include these new fields to the process and map it BP Master in CRM(say for example to table BUT000) and what/where enhancements need to be performed?

Alex,
One suggested option is to;
Add these fields to the customer tables (KNA* or KNB*) using append structures.
On the CRM side, you can use EEWB to enhance the fields for the partner.
Refer to the SAP documentation for the exits available at various stages of data transfer.
http://help.sap.com/saphelp_crm40/helpdata/en/c3/95fc381478ab6fe10000000a11402f/frameset.htm
On the R/3 side, you would need some development ( probably OPEN_FI_PERFORM_CRM0_200_P) to fill the additional fields of customer master (from characterstics table).
You would also need an exit on CRM side to unpack the data being sent from R/3 and update the customer include data structure to fill the fields created via EEWB.
Hope this helps.
Thanks,
Surendar

SQ02 - Ad Hoc Query - Custom additional fields

HI experts
I am working additional fields in SQ02 .
I added a new additional field for an info type in SQ02.
Issue is when I right click on my additional field I can see options 'Only value' but for other fields I can see ' only value ' , 'only text' and ' value and text' .
When creating the new field in SQ02, the check box "Determine LIKE reference using text field" is disabled.
Is there is configuration somewhere or any other way, where I can also get the text for the custom additional field?
I can see that this question has been asked earlier, but there are no responses.
Also on SAP documentation, this field is shown as enabled.
But I cant get the text for a additional field working. Please coyu post your suggestions?
Thanks,
Vaishali

Hello Srini,
Thank you for your time.
Consider the additional field SYHR_A_P0001_AF_PL_CTRY (country) in Infotype 0001 in the infoset.
This field does not populate any country code or text for us, so I need to create a custom additional field that will have the same functionality.
I have created two new additional fields - Z_Country_Code and Z_country_text in additional fields section of IT0001.
One field fetches country code and other fetches the text corresponding to this code.
What I want to achieve is the standard functionality that is available for standard fields - P0001-WERKS for example.
In the query output, you could select to display text/code/ text and code.
For the additional field "Country", I have to select two separate fields - Z_Country_Code and Z_country_text to achieve the same functionality.
How can I achieve this?
When we define a custom additional field, in the field definition section, there is a check-box "Determine LIKE reference using TEXT FIELD" , but this is disabled when I create the additional fields. Perhaps, if this is enabled, then I can define the text table.
Any ideas how to enable this text box?
Vaishali

E-Recruiting Addition field to Infotype 5107

I'm implementing E-Recruiting for a client.
I added the additional field to infotype 5107 Desired Work Location using PPCI. I also created a custom table for Desired Work Location to store the value of Location (county, institution & etc.). When I added the new field to the infotype 5107 it automatically shows up on the Desired Work Location of E-Recruiting page as a text field. I found the bsp for this page it's desLocn_detail.bsp. Also I have to set two field that are already on the page Country and State to a default value. Both are drop down list.
Here's my question:
1.I would like to make the new field list box i think that's what it is called, where the candidates can select multiple locations. How & where can i do this? And how can i link the value from the custom table that i created to the new field that I added to Infotype 5107 to appear on the list box?
2.How and where can I set Country and State field to the a default value? Is this done in the IMG?
3.I'm assuming the deslocn_detail.bsp is a SAP standard BSP. should I modified this bsp to rendered what I'm supposed to do? If i modified this page when the upgrade/service pack is applys my modification will be wiped out?
any suggestion will be helpful.

I think you should take the following approach:
The only sane way to keep multiple values in a single database record that comes to my mind id to create a new table to keep the selections.
It's key should be the same as of the HRP5107 table plus a sequential number for counting selections.
There are further 3 things to consider:
1. Filling up the table before display with current selection.
2. Handlig user selection after submit.
3. Hiding the text field from user input.
ad 1.
I havn't used <htmlb:listbox> before, so I might wrong somewhere, but i guess that you should prepere two tables and pass them to table and selection attributes.
Probably it would be best to store them as attributes of the controller to provide easy access from the bsp.
The proper place to fill these structures is the DO_REQUEST method, probably near the end of the method when all standard stuff is done.
In this method you should read the configuration of available loactions and put it in the 'table' attribute,
and read the table of selections and put them in the 'selection attribute'.
ad 2. The place to handle input is the DO_HANDLE_DATA in the controller. As i've said a haven't used listbox, but probably the are multiple fields with the id of the listbox, each containing a selected item.
You should read them here and place them in the 'table' attribute.
Next you have change the on_save method in the controller (Actually it might be in a parent controller - i haven't checked it).
In there you should insert the values in the 'table' attribute to the custom table with selections (probably you have to delete all entries for the current infotype record first)
ad. 3
Now that i wrote 1 and 2 i see that you can just remove the field from the infotype...
Hope this helps.

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

Additional field in infotype 0009 issue ( PBO and PAI )

Hi Guru,
I need your help please.
I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
Thanks very much in advance.
Regards.

Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
After more investigation, the probleme come from a check over country bank.
In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
call method cl_hrpad00_iban=>process_iban_pai
      changing
        cs_bankdata = ls_bank_data_current
      exceptions
        error_iban = 1
        others      = 2.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    call method cl_hrpad00_iban=>get_bank_data_old
      importing
        bank_data_old = ls_bank_data_old.
    if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
bank country changed -> leave screen needs to be done
      leave_screen = 'X'.
    endif.
But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
Thanks in advance for all yours reply.

Additional field in Infotype 0001

I manage to add an additional field in the infotype 0001 in Dev client. I have a bit concern when to apply it in the production client.
Do you have any experience to share on this?

hi
test in development server later test in testing server later send it to production server
nothing to worry
all the best

Adding field from Custom Infotype in Screen Header-PA30

Hi all,
Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
Please guide.
Thanks in advance.

Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie

HRFORMS - Custom table and Infotype Fields

Hi,
I am trying to add Custom table and Infotype Fields to the HRFORMS but i couldn not...
1) I have created Custom MetaNet in HRFORMS_METADATA
2) Created Meta Dimension and MetaStar for thr new fields
3) When I use these custom metenet to crate Info stars in HRFORMS transaction, I am getting erros for DDIC activation.
Does anyone has any idea or am i missing any steps?
...Naddy

No issues when did it again.

Additional Fields in Custom in HR Infotype

Similar Messages

Maybe you are looking for