Additional Items FI-CA IS-T

Hi
We want to use "billing document additional items". We want to print additional information on the invoice e.g. itemization of calls for a telephone bill. I assume that we have to add the fields to a structure??? Is there a spesific table that contains the data? BAPIs? Does anyone have a Cookbook on how to do it?
Regards
Owe N.

Do you have all the data available in SAP? I can imagine that your database may become pretty big if each call is one document or item in FI/CA.
Maybe you should get the itemized data at the time you print the invoice from an interface (e.g. flat file).
If you want to print the invoice using the print workbench in FI/CA you should have a look at <a href="http://help.sap.com/saphelp_media472/helpdata/en/77/15763542833803e10000009b38f889/frameset.htm">Correspondence</a> and <a href="http://help.sap.com/saphelp_media472/helpdata/en/ea/a45a36998cf732e10000009b38f839/frameset.htm">Print Workbench</a>
Tim

Similar Messages

How to show additional items in the same window using stacked canvas

How to show additional items in the same window using stacked canvas.
My content canvas has 14 items, and I have to include more.
I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

What is "Additional Items Found"?

When digitizing footage for a project from several tapes, I'm getting the message "Additional Items Found" as I go to capture a clip. The entire message says:
"Additional Items Found.
2 items outside your current selection have been found to reference media about to be processed during this operation.
If you add these items to your selection, an additional 1.5 GB of disk space will be required for an additional 00:06:59;25 of media referenced by these items.
If you select Continue, these items will not be added to your selection, and they may be taken offline.
(Three choices) Add Continue Abort
I've been choosing Continue without any problems. However, one time (on a lark) I did choose Add. Two clips, and the sequence they were in, went immediately offline and the deck took off in what appeared to be trying to find the two clips-- they were on tape but it could not find them. So I stopped the deck's search, re-captured the clips and the sequence came back on line but I had to render (?) the clip within the sequence-- it would play but I would get frame lost messages. Once I rendered the clips in the time line, I was able to continue on my way.
Now, I have been using the multi-clip function on FCP 5 (great function, BTW) and I'm wondering if this could be part of the culprit. But I'm getting the "Additional Items Found" message with every clip captured, including those that are not part of multi-clip (on a batch capture, the message only appears once).
Any ideas?

I hope I don't sound too much like the manual, but:
When you select one or more items and then do a batch capture, Final Cut Pro checks all currently opened projects to see if there are any other clips that reference the same media. If so, the Additional Items Found dialog appears.
To make sure that these additional clips are also reconnected to the source media being captured, click Add. If you click Continue, these extra clips will be ignored and the batch capture is restricted to the clips you originally selected.
For example, suppose you have a bin containing one sequence and twenty clips, and they're all offline. You select the sequence, then choose File>Batch Capture. The sequence uses ten of the clips, so even though you only selected the sequence, the Additional Items Found dialog appears. If you click Add, the ten clips in the Browser that are also used by the selected sequence are added to the total selected items that will be reconnected after the batch capture is complete.
When you use the Media Manager to do a potentially destructive operation, Final Cut Pro checks all currently opened projects to see if there are any other clips that reference the same media. If so, the Additional Items Found dialog appears.
Add: Click this button to override your original selections and preserve parts of clips that you want to delete (since these clips are outside the range of clips you originally selected to operate upon).
Continue: Click this button to continue the operation you originally specified without modification. (Youll probably select this option when using the Media Manager.)
Abort: Click this button to stop the Media Manager operation (for example, if you want to redo your selection).
CaptM

"Additional Items found" warning?

I've had this happen irregularly over the past few years when batch capturing logged clips, I just hit continue, and don't have any problems. Just wondering if anyone's figured out exactly what's going on. For example, I'm working on a relatively simple project, I put a new tape in the deck, launch log and capture, set my "capture" bin as the logging bin, Mark an out at the end of the tape, rewind and mark an in with sufficient preroll at the beginning of the tape and log the clip. I have abort capture on dropped frames and make new clip on timecode break enabled. When I go to batch capture this clip, I get the "Additional items found" warning. There are no other clips in this or any other project, (open or closed) from the same reel.
As I said, this doesn't cause any problems, I just wonder what the heck is going on. I've done some searching here, but don't seem to see any definitive answer.

I've had it happen occasionally as well and it seems to have always happened when I had, at some time in the past, given another reel the same name. Doesn't really make sense since those clips are not in the current logging bin but... it's all I ever came up with.
rh

I've LOST my "add to bookmarks" setting and cannot put additional items in my bookmarks

When I have an item that I want to bookmark, I press "Bookmarks" on my toolbar. The first item used to say
"add to bookmarks" Now it just lists my bookmark items
so I can't add any additional items to my bookmark pages

Some menu entries are hidden by default and only appear if you use the keyboard to open the menu.
You can see the difference if you use Alt+F or Alt+B to open the "File" and "Bookmarks" menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by pressing Alt or by pressing F10.
* "Bookmark All Tabs" (Shift+Ctrl+D) no longer shows in the Bookmarks menu unless you open the Bookmarks menu via the keyboard (Alt + B).
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
See also:
* [/kb/how-do-i-use-bookmarks]
* BookmarkThisTab: https://addons.mozilla.org/firefox/addon/bookmarkthistab/

Payment proposal Exception list - Add additional items to the exception lis

Hi,
We have a requirement to add additional vendor open items (having Bank type as ABC and Payment method as Y) to the Exception list of the payment proposal when we run F110. Along with other open items which are may be blocked for payment or which require corrections that normally appear in the exception list, we also need the vendor open items satisfying the criteria of (having Bank type as ABC and Payment method as Y) to be appearing in the exception list.
We don't want to exclude these items altogether by putting them in the 'Free selection' tab of F110 but rather want them to be in the exception list.
Any inputs are appreciated.

Hi
All payments due will be selected by the payment run depending on the selection criteria you enter. I.e. if you need invoices due with payment method Y, enter Y in the payment method selection.
I am not clear to what you mean by Bank type. However, do note that in the "Free Selection" tab allows you to include specific fields as well. I.e. by not selecting "Exclude values".

Add additional items to line item display? (FBL1N, FBL5N)

Hello everyone,
I'm trying to add some "custom fields" to Customer/Vendor line item display
which is only available in BSEG table. (new GL function)
I could not find any BAdI or something..
Is there any way to do this?
thank you in advance for any comments.

Hi,
     Try with this Menu enhancements,
FI_ITEMS_MENUE01                                          Menu Enhancement
FI_ITEMS_MENUE02                                          Menu Enhancement
For the created Menu item, under that function code write the logic to get the additional data.
Regards
Bala Krishna

How to display additional items from an LOV?

Hi guys,
This is bound to be a fairly common scenario, though I didn't see it in the Forum archives. The wizard-based LOV facility provides support for one display value and one return value. But how do you display a half-dozen items from the row found in the LOV in addition to the one returned by the LOV?
FWIW, here's what I came up with. I used the wizard-based LOV to bring back the first item. Then I added a button that said "Get additional values". An "After Submit" procedure, triggered by the new button, populates the other page items with values from the database table. Then in the "After Submit" Branches section, the same page is defined as the target page, again assuming that the new button was pushed. I figured that branch would render the new values. But no. From using the Session button, I can see that the additional page items are, indeed, populated correctly. But they don't become visible on the page. What gives?
BTW, if there is a slicker/easier way to accomplish this, I'm all ears. Ideally, when the LOV returns its value, it would return all of the half-dozen additional values at the same time (no additional button to click). I look forward to your clever solutions.
BTW, I'm using Apex 4.1 and Oracle 11g. Accomplishing this in server-side code is acceptable.
Thanks much,
Kim

Thanks for the suggestion about the SkillBuilders Super LOV plug-in. I'm far from being an expert Apex developer, but I was able to install and use it very quickly. Now for the $64K question. I'm displaying a half-dozen or so columns in the LOV (which looks great). However, I'd like for every one of them to populate page items. That's the piece that I don't see how to accomplish. I read the documentation, but didn't see how to do it there. I'd very much appreciate it if you could tell me how to send those 6 LOV values to items in the page and have Apex display the values.
Thanks so much,
Kim

Additional items found dialog during capturing

first of all why when i hit capture does fcp appear to do a scan of all my sequences in the open project. the clips i'm capturing are new clips and have nothing to do with what's in any sequence. in addition it takes about a minute to scan all these sequences so it's slowing down the process immensely. and then i get an *additional clips found dialog* where it's telling me that it found "32 items outside of your current selection have been found to reference media about to be processed during this process." "if you select continue, these items will not be added to your selection and they might be taken offline."
this is sheer madness ... the clips i'm attempting to capture are unique clips to the project. and i don't need fcp to waste time scanning my sequences. is there any way to turn this "feature" off. and i don't to either add clips to my selection or have clips taken offline if i select continue. btw only the newly logged clip is selected and no other project is open.
i'm sure the answer is simple but i can't find it ...
Message was edited by: methenyhead

When you're setting up your capture, are you giving distinct names for 'Reel' and 'Description'?
If so, not sure what the deal is. If not, you should be.
FCP relies specifically on the REEL info to determine which physical tape the media was captured from. Then it's best to type a name in the DESCRIPTION, so you don't end up with a slew of files named...Untitled 01, Untitled 02, Untitled 03...etc.
Let us know.
K

Additional Item Added to InfoPath Choice Field Missing from Designer

I have an InfoPath 2013 form submitting back to a SharePoint 2010 Forms library. I had published the form, promoting the various fields, and everything was working properly. I then needed to add an additional option to two different choice fields.
I added them in InfoPath, re-published the form and the options are available and selectable when I use the form. They show up in the SharePoint forms library on submit.
I'm now building a workflow for this library and I'm trying to add a condition that uses the added item (Global) from one of the choice fields (Region). It is not showing as an option. I've refreshed the list and workflow in SP Designer.
I've re-published the form from InfoPath. I've cleared the cache for SP Designer, InfoPath and Internet Explorer. I have never had this happen before and have no idea how to fix. Suggestions? Thanks in advance for any help!
Here is what is in the InfoPath form:
And here is what is in SharePoint Designer:

Hi,
I have done a test. I can re-appear your issue.
Refer to the following:
I published the form to SharePoint 2010 Forms library, the type of the Region column is a “single line of text”.
Then I automatically changed the type of the Region column to “choice” and added the options to the choice filed.
After add an additional option to the choice fields(Region) in InfoPath, I re-published the form to SharePoint 2010 Forms library. when I click new document,
the new added option showed up in the SharePoint forms library on submit, but It is not showing as an option in SharePoint Designer.
I found the choice column Region didn’t update the new added option, I need to add it
automatically. Then It will showing as an option in SharePoint Designer.
For your issue, Go to Library Settings->edit “Region” column->add the value(Global) choice into the column.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Need help with dbwizard in loading additional items on forms

I used database dbblock wizard to create a form called employee. I took four fields from employee table and put them on my form.
My questin is If i want to add more items in my form from the same employee table, how can i do it.
These items should reside on same block as the other items.
plss help

Hi rahman,
Greetings,
Simple, just add text item, with the help of layout editor, in the same block as per your requirement and then click and check the property of newly add item to fix database => yes , column => as per your table column name / change the textitem Name as per you table column name.
Then it will work fine.
kanish

Addition Item getting added while posting Sales Order Changes - ORDCHG

Hello,
I have a requirement to post sales order changes - ORDCHG. Now, when I am adding the qualifier 002 at the item segment E1EDP01 with the existing Item number, it is creating another Item in the sales order rather than changing the existing one. What could be the reason? I am passing the below values in to the respective segments.
E1EDK01-ACTION = '003' - Changes in one or more items
E1EDP01-ACTION = '002' Item Changed.
Please advise.
Regards,
Venkata Phani Prasad K

I encountered the same problem. As Vinit pointed out, it looks up the line item using field POSEX on VBAP instead of POSNR. If you want to look up POSNR, you can implement either user-exit ZXVDBU07 or ZXVDBU09 in IDOC_INPUT_ORDCHG and do the following.
Loop through YVBAP and modify the internal table to set POSEX to be equal to POSNR.
This will cause the IDOC to select the correct line item based on POSNR. The only side-effect is that when the order is updated, it will also update field POSEX on table VBAP.

I keep getting a message saying the game was purchased by a different ID so it won't let me buy additional items. I have never had a different ID.

Hello,
Whenver I try and upgrade my game and need to pay for the new items, I keep getting a message that "the app was purchased by a different Appllie ID. To buy this item with this Apple ID, you must first purchase the app."
I have never had a different ID and how do I purchase the app when it's a free game?
Please help me. Thank you very much!

The game belongs to your wife, as it was downloaded using her ID. If you want unrestricted use of it, download it using your own ID.
If it were not so, the whole world could "borrow" a single person's copy of software. That's called stealing.

How to sync additional items after initial sync?

With my new 8GB iPod Touch I synced a few items and now wish to sync more. In order to do this I connected my Touch to my iMac and opened iTunes. According to the Touch User Guide (page 10) I am supposed to select iPod Touch in the sidebar. However, no iPod Touch in a sidebar is apparent anywhere. What gives? Please advise procedure I should follow to resolve this issue and continue on to sync more items that on my iMac to my Touch.
Bob

Stedman,
Right on! You are Kee-rect! Right after I made my last post things started to click, and I began to realize that whoever wrote the iPod Touch User Guide should have been more definitive in his instructions! Because of that I was looking for the iPod Touch in the sidebar of the iTunes program on my Touch instead of in the sidebar of the iTunes program on my iMac.
I'll likely run into a few more hurdles before absorbing the contents of this challenging 169 page User's Guide!
Thanks for responding. I'm nominating you to write the next User's Guide!
Bob

Additional items or loops

Let's say I want an order form, but don't know how many row (items) the person will need. So I create a form with ten lines. Since this is a flat file sort of response table, we're using one row per submission. How can we best add some flexibility into the form so to allow the user to submit more than ten lines without having to start over and fill out the whole form again?
I'm thinking something like one record being contact info plus ten lines of items, and when the user gets to the bottom, they hit submit, but afterwards, they are given the option to add more lines of items, but they don't have to complete the contact information at the top of the form again. That is, the form repeats the items until the customer finishes as many as they need. So, if the customer needs 16 items, two submissions are used, one with ten and the next with six.
Or is this well beyond the scope of this tool? If so, is there another tool Adobe has that can do it? I'm trying to keep from having to start from scratch and write something myself.

Here is one thing you could try.
Create 2 forms
First form would collect all of their info and would have a redirect setup that goes to the second form
The second form allows the user to enter each item, it redirects back to itself so they can keep submitting items.
It isn't perfect but I think it might work for you.
Randy

Additional Items FI-CA IS-T

Similar Messages

Maybe you are looking for