Additional items found dialog during capturing

first of all why when i hit capture does fcp appear to do a scan of all my sequences in the open project. the clips i'm capturing are new clips and have nothing to do with what's in any sequence. in addition it takes about a minute to scan all these sequences so it's slowing down the process immensely. and then i get an *additional clips found dialog* where it's telling me that it found "32 items outside of your current selection have been found to reference media about to be processed during this process." "if you select continue, these items will not be added to your selection and they might be taken offline."
this is sheer madness ... the clips i'm attempting to capture are unique clips to the project. and i don't need fcp to waste time scanning my sequences. is there any way to turn this "feature" off. and i don't to either add clips to my selection or have clips taken offline if i select continue. btw only the newly logged clip is selected and no other project is open.
i'm sure the answer is simple but i can't find it ...
Message was edited by: methenyhead

When you're setting up your capture, are you giving distinct names for 'Reel' and 'Description'?
If so, not sure what the deal is. If not, you should be.
FCP relies specifically on the REEL info to determine which physical tape the media was captured from. Then it's best to type a name in the DESCRIPTION, so you don't end up with a slew of files named...Untitled 01, Untitled 02, Untitled 03...etc.
Let us know.
K

Similar Messages

What is "Additional Items Found"?

When digitizing footage for a project from several tapes, I'm getting the message "Additional Items Found" as I go to capture a clip. The entire message says:
"Additional Items Found.
2 items outside your current selection have been found to reference media about to be processed during this operation.
If you add these items to your selection, an additional 1.5 GB of disk space will be required for an additional 00:06:59;25 of media referenced by these items.
If you select Continue, these items will not be added to your selection, and they may be taken offline.
(Three choices) Add Continue Abort
I've been choosing Continue without any problems. However, one time (on a lark) I did choose Add. Two clips, and the sequence they were in, went immediately offline and the deck took off in what appeared to be trying to find the two clips-- they were on tape but it could not find them. So I stopped the deck's search, re-captured the clips and the sequence came back on line but I had to render (?) the clip within the sequence-- it would play but I would get frame lost messages. Once I rendered the clips in the time line, I was able to continue on my way.
Now, I have been using the multi-clip function on FCP 5 (great function, BTW) and I'm wondering if this could be part of the culprit. But I'm getting the "Additional Items Found" message with every clip captured, including those that are not part of multi-clip (on a batch capture, the message only appears once).
Any ideas?

I hope I don't sound too much like the manual, but:
When you select one or more items and then do a batch capture, Final Cut Pro checks all currently opened projects to see if there are any other clips that reference the same media. If so, the Additional Items Found dialog appears.
To make sure that these additional clips are also reconnected to the source media being captured, click Add. If you click Continue, these extra clips will be ignored and the batch capture is restricted to the clips you originally selected.
For example, suppose you have a bin containing one sequence and twenty clips, and they're all offline. You select the sequence, then choose File>Batch Capture. The sequence uses ten of the clips, so even though you only selected the sequence, the Additional Items Found dialog appears. If you click Add, the ten clips in the Browser that are also used by the selected sequence are added to the total selected items that will be reconnected after the batch capture is complete.
When you use the Media Manager to do a potentially destructive operation, Final Cut Pro checks all currently opened projects to see if there are any other clips that reference the same media. If so, the Additional Items Found dialog appears.
Add: Click this button to override your original selections and preserve parts of clips that you want to delete (since these clips are outside the range of clips you originally selected to operate upon).
Continue: Click this button to continue the operation you originally specified without modification. (Youll probably select this option when using the Media Manager.)
Abort: Click this button to stop the Media Manager operation (for example, if you want to redo your selection).
CaptM

"Additional Items found" warning?

I've had this happen irregularly over the past few years when batch capturing logged clips, I just hit continue, and don't have any problems. Just wondering if anyone's figured out exactly what's going on. For example, I'm working on a relatively simple project, I put a new tape in the deck, launch log and capture, set my "capture" bin as the logging bin, Mark an out at the end of the tape, rewind and mark an in with sufficient preroll at the beginning of the tape and log the clip. I have abort capture on dropped frames and make new clip on timecode break enabled. When I go to batch capture this clip, I get the "Additional items found" warning. There are no other clips in this or any other project, (open or closed) from the same reel.
As I said, this doesn't cause any problems, I just wonder what the heck is going on. I've done some searching here, but don't seem to see any definitive answer.

I've had it happen occasionally as well and it seems to have always happened when I had, at some time in the past, given another reel the same name. Doesn't really make sense since those clips are not in the current logging bin but... it's all I ever came up with.
rh

File not found message during load

I am trying to ascertain what resource my built EXE can not find during startup. While the reource IS ultimately found, and the APP runs, it displays the "VI not found" dialog during load.
Any good way to either silence this dialog box of ascertain programmatically which VI is in the wrong location?

If you do have VI which is to be loaded dynamically...
This VI might be of helpful in one way or another in the VI's calling path.
Hope I got your problem right.
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
_findbasedir.vi ‏17 KB

Unable to monitor audio during capture

I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
Can anyone think of anything I've missed in the initial setup?
Keith
Message was edited by: Keith R Thompson

Keith,
For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
Hope that helps!
~Luke

VS 2010 Pro "Other Project Types" / "Setup and Deployment": No items found

Hello,
I have VS 2010 Pro Version 10.0.40219.1 SP1 Rel. I have developed a VB.Net application and would like to deploy it. When I try to add a setup project to the solution, I get "No items found" where a list of project types should be in the "Add New Project"
dialog, "Installed Templates", "Other Project Types", "Setup and Deployment". Shouldn't the Pro version have those templates installed? If so, can I copy them from somewhere? I noticed that "Database" and "Test Projects" also have empty lists. There are lots
of templates available for the various languages.
I tried to modify the VS 2010 installation by adding support for SharePoint, but that did not help. Do I have to uninstall, reboot, and re-install? It's so cumbersome considering that I would need to redo the updates as well.
OS is Win 7 Pro, processor is Intel E8400.
Thanks!
r4

Hi robertrackl,
Thanks for your post.
The Setup Project template is located in: Installed Templates >> Other Project Types >> Setup and Deployment >> Visual Studio Installer. Would you please check if the templates exists in this path?
If not, you can follow the steps below to reset your Visual Studio templates:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE
(by default is C:\Program Files \Microsoft Visual Studio 10.0\Common7\IDE);
Delete the ItemTemplatesCache, ProjectTemplatesCache
folder;
Open Visual Studio Command Prompt (2010) under Start menu -> All Programs -> Microsoft Visual Studio 2010 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
Run the devenv /InstallVSTemplates switch;
Run the devenv /Setup switch.
If you have any concerns, please feel free to let me know.
Best Regards,
Andrew Wu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

Re: No expenditure items found in DP90

Dear all,
I am using SAP Best Practices pre-configured scenario for Services Industries.
Generally, this is to address the need of customer's need for fixed price and time & material billing in a standard service industry practice, which the flow of the process is as below: -
1. Creating a Quotation (VA21)
2. Creating a Customer Contract wrt to Quotation (VA41)
3. Maintaining Realization % on Contract Line (VA42) - in the line item of the Contract to maintain a Pricing Agreement for Surcharge.
4. Time Recording (via CAT2)
5. Travel Management (via PR05)
6. Creating the Fixed Price Billing Document (VF01) - fixed price billing
7. Creating a Resource-Related Billing Request wrt Customer Contract (DP90) - time & material billing
8. Creating the Invoice for the Billing Memo Request (VF04)
All the steps as mentinoed above is working fine, except for Step 7 during DP90 creation, it is indicating that no expenditure item is found. When executing the DP90 tcode, the tcode is indicating no expenditure item is found although a pricing agreement (in Step 3) has been maintained for surcharge.
Please assist if any of you have came across this unexpected error and how to resolve it in config.
Thanks.
Best rgds..

hi
check whether this sap notes can help
1110158 Contract Billing - DP90 not generate Debit Memo Request 08.04.2009
1130699 DP90 and message "No expenditure items found" 11.01.2008
1094018 DP90: Error message VPK1 310 even though costs exist 18.09.2007

Topics found dialog results - unusual situation

Hi everybody,
I'm having a pretty annoying situation. I'm building a HTML (.chm) help based on the imported microsoft word file.
The structure of the file is something like:
====================
Header1
..Header2
..text text text
...Header3
...text text text text
....Header4
.....Header5
.....text text text text
Header1
...etc
====================
I used pagination for headers 1, 2, 3, 4, 5 during import to create a topics list. It all looks pretty, and when I search for a keyword it finds all those topics.
Topics found dialog box also distinguishes different topic titles for index keywords. The problem occurs in the TOC tab. Since in my source word document there is nothing between header 1 and 2, or header 4 and 5, a topic generated based on the pagination for Header1 would be a single line containing that header. When user clicks on the book link in TOC that links to that topic a one line is shown.
I tried importing first topics based on header style1 (via pagination), then import again header style 2,3,4,5 and it worked, although in such case when I click on any index keyword it doesn't distinguishes different topic titles in the Topics found dialog box. It always shows the index keyword name instead. Search still works that way.
Any ideas for a workaround? I'm stuck. Please help. Thank you,
Kind regards,
Kamil

For clarification:
In the Table of Content whenever I select any book I want to display topics based on Header Style 1 (load everything that starts with header1 and ends with header1 in the selected topic).
At the same time, when I select keywords from the Index list or use the Search tab I want to break down main topics more detailed way (based on header styles 1,2,3,4,5...).
Example: Because now my topics are created based on style Header1 only, topics found dialog box doesn't distinguishes subtopic names (title "Importing" is shown twice where it should be "Importing" and "D Importing Data").
Is this possible at all?

Turning OFF Audio Playback during capture?

When capturing a tape from my video camera in Premiere Pro, How do I turn off the audio playback while recording?
I want to record the audio and the video, but I don't want to hear the tape's audio playing back through my computer speakers while recording. The technician I spoke to over the phone was extremely unhelpful and suggested I simply mute my computer speakers if I don't want to hear it. What if I want to listen to music or am trying to watch another video file in a different program without having to hear the premiere pro audio blaring over it. Please someone tell me the rude technician I spoke to did not understand clearly what I was asking and if anyone knows how to accomplish this or can shed anymore light on the topic.
I just spent 40 minutes on the phone with an adobe tech support rep who took 40 minutes to correctly understand the issue I was calling for and then informed me that the functionality does not exist within the premiere pro software. Sorry if this comes off as a little edgy, but my tech "support" call was extremely frustrating and now to find that premiere pro wont let you listen to anything in any other program while recording seems a little rediculous.
Thanks,

It is risky to run other applications while capturing footage. May lead to dropped frames. I have found that Premiere is a resource hog and more likely to have this problem than other capture programs. Not that Premiere is a bad program for capture, but you might find an alternative that provides a better solution for your specific need.
It has been a few years since using Scenalyzer, but I always found that program to be extremely reliable and flexible. And it has the capability of silencing the audio during capture. Since you didn't say what format you are capturing I can't say whether Scenalyzer will work for you. Check it out.
I don't think Harm was being condesending at all. He is simply warning you about the potential problems your system may face by attempting to multi-task in the manner you describe. It's up to you to decide if you want to follow the advice you seek here.
Good luck

Scene Detection during capture

I will try to keep this simple. Here's some background on what I am trying to accomplish. I shoot sporting events for recruitment videos. During the games I start and stop recording on each play. So at the end of the day I end up with 100+ clips for each game/match. During capture I need my software to be able to detect each scene which saves me valuable time in post. I can quickly scrub each clip and decide what to dump. I shoot in HD(HDV) because the resolution allows me to do much more during post.
Premiere Pro does not detect HD(HDV) scenes as every other NLE I have seen does. So my first question is why not? I hate having to use multiple NLEs/programs when the Adobe Suite of programs should do the job.
Without getting into why, I currently capture on a Macbook because iMovie and/or Finalcut will detect scenes. Then I use my Mac OS copy of Premiere Pro (CS3) to edit since it does allow me to import .mov files BUT I have CS4 Production Premium on a much more powerful PC which I would love to use BUT I cannot import the .mov files I have captured on my Macbook to PP CS4 on the PC ... I get a codec missing or unavailable message. Which I don't understand when Adobe publishes .mov files as being supported under the windows version. I contacted Adobe Support and was told the Apple Intermediate Codec (AIC) is not supported. How can that be? Isn't that Apples standard Codec? Sorry for the long winded post but there has to be a workaround or something simple I am missing. Any suggestions are appreciated.

Ok I have confirmed that setting the capture codec to ProRes422 when capturing via Finalcut Pro 6 on my Macbook Pro will allow me to import the same clips to Premiere Pro CS4 on my windows vista PC. Thanks again Colin!
Why? Because I use my Macbook Pro on location. I film sporting events which I have found works best in post if I start/stop recording after each play. I end up with 100 or so clips. I am making highlight videos so it is easier to scrub through small clips to determine what I am going to use than it is to scrub through the same 2 hour footage to tag in/out points. To get the clips I need a capture program that can detect scenes. Finalcut does this automatically during capture. I prefer to do all of my post in Premiere Pro but it will not detect scenes with HD/HDV footage. Finally when I get the footage home I have a much more powerful PC to edit and render out and being able to just transfer my .mov clips from the MacBook to the PC for import to PP is awesome.

Lighting issue during capture

During the capture process, when I monitor the picture on the camera's LCD viewer it appears bright & normal. But in the viewing window on FCP during the capture it appears much darker. Likewise, after the capture is complete and I run the clip in the viewer it also appears just as dark as it did in the viewer during capture. Likewise, it's just as dark when placed in the time-line and viewed in the canvas. Hence, is it a setting during capture or something else that causes the picture to become much darker in FCP? THX!

Nothing is being adjusted during the capture process. The images being brought into the computer are what the camera really recorded.
If so, why do they look so different? It could be someone turned up the "brightness" on your camera viewfinder to see images on a sunny day. It could be your computer monitors are set way too dark.
The truth will not be found until you view the image on an adjusted external monitor designed to play that video format. Until then, you have no real idea of the lightness/darkness of the image.
x

Red interference during capture with FCP 5.1.4

I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
I would be EXTREMELY for any help anyone can give me. Thanks in advance.

This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
Pleasa Help

Line items are missing during transferring ITS to EBP--tricky problem

Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
Ravi

Hello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe

FI-FM: Partial clearing on account assignment (tcode fmfg_aapay)-No open items found

Hello!
We have activated business function PSM_USFED_PPAP3, then :
- Federal Government Functionality - activated ;
- settings in Financial Accounting (new)---> Basic Settings --> Ledgers --> Partial clearing on account assignment:
               - Activate partial clearing by acc.assignment:   Check
               - Maintain relevant ledger for Split view : no entries maintained (there is only one ledger "FM", which is the leading ledger, no special purpose ledgers)
               - Set supported document types: KR
               - Set payment block: B
Other settings:
     - FM activated, update profile 000101, document splitting (method 00...012), splitting characteristics: vobelnr, knbelnr, fipos, geber, gsber, fkber;
document type KR : business transaction 0300 (vendor invoice).
When we use tcode FMFG_AAPAY no open items are found (message FMFG_AAPAY009), even though there is a vendor invoice posted (tcode FB60, document type KR). The invoice is displayed in FBL1N as an open item and it is split according to the splitting characteristics (e.g. table fagl_splinfo is showing the split vendor items).
Can you, please, explain why there are no open items found in FMFG_AAPAY?
Thank you!

Dear all,
I am closing this issue since I got the solution apart from the mentioned above.
There is no need to change the Document Type since that will only change the Document type for e.g. from KZ to ZR, nothing will happen in the accounting entry.
Solution was there in the "Posting rule" which i defined for making Cheque Payment.
There are options of "Posting Type" - 1 which is for "Post to G/L Account" - In this case, system will Post the following entry Dr. Outgoing Bank Account & Cr. Main Bank Account without looking for any "Open Item".
Posting Type" - 4 is for "Clear Debit G/L Account", menans that if you are having "Open Items" and you want to clear those then only use this posting key.
While testing I had not posted any payment to vendor in Bank Outgoing Account hence no question of having "Open Items" in Bank Outgoing Account. And I had made the selection of "Posting Type" - 4, which require "Open Items" for direct clearing, hence was getting the subject error.
This is for everybodies information.
Thanks & Regards,
Shridhar Sawant
FICO

Additional items found dialog during capturing

Similar Messages

Maybe you are looking for