Additional VAT condition type is not flowing to PO

Dear All,
An additional tax of 1 % is levied in State of gujurat and for this we can take the credit . It behaves exactly like VAT like it calculates its value as 1% of base amount and excise duty levied on it . But this condition is not available in standard TAXINN procedure . So we created a new procedure copying from TAXINN .We created a condition type copying from standard condition type JVRD that is for VAT on which we take credit .Then we assign this condition type to tax procedure immediately below condition type JVRD and it should calculate the value in the same way as that of VAT .Then we assigned this procedure to India , assigned all the condition types in CIN config and maintained default condition types for this procedure copying from TAXINN .
But while we are creating a PO after that ,this additional tax condition type is not flowing in it .
Can anybody let me know where is the missing link in this customisation .
Regards
Abhijit Das

Hi AP ,
The condition type is Valid from : Todays Date and valid to 31.12.9999 . Is there any problem with this ?
Abhijit

Similar Messages

%age entered in the Info record condition type is not flowing to the PO

Dear SAP Experts,
I have created a condition type ZCV1 by copying the condition type JCV1. But, if I enter the percentage in the JCV1 in the Info Record, it flows to PO, but, the percentage entered for ZCV1 in the inforecord is not flowing to the Purchase Order.
Request to provide solution for the above problem.
Thanks in advance.
Regards,
Muthuraman.K

Sorry , Double Post

In billing document VAT condition type flowing 2 times with Different value

Hi,
1. In my requirement, In order creation time , in the pricing procedure ZPROJT (Proj Material Sales) VAT condition type (JLST) is flowing one time with the condition record of 5% for one line item and the same we changed manually to 12.75 %, for the same condition type (JLST) and we saved the order. After that we created delivery with reference to the same order, final the billing document creation time with reference to the delivery (in the pricing procedure ZPROJT (Proj Material Sales))for the same line item VAT condition type (JLST) is flowing 2 times with 2 different values ( 5% and 12.75%) and it is calculating the 2 different values to the final value. But normally only the manually changed (12.75%) value should be taken to the account. Please help me How to stop the condition type (VAT C Type "JLST") from flowing two times for the same line item in the billing - and we need to take the value of (12.75% manually changed value) to the final calculation.
2. In one pricing procedure normally if you add the same "C Type" for two times it will throw the error message like "Duplication Of C type" and you can't save the order with out deleting the same. Please tell me, where is the contole for the same.

Hi,
Check copy control settings in VTFL
At item level make pricing type as D - Copy pricing elements unchanged
KAPIL

Additional Pricing Condition Type Determination in Returns Oder

Hi Guys
I am working on Returns Sales Process, but I have stuck in pricing?
The thing is I have to determine the additional condition type based on transaction type .i.e. returns order when I create the returns order with ref. to sales order the pricing condition types which is present in the sales order has been copied but the additional condition type is not determined automatically?
I have created the 2 pricing procedure one of sales order and other for returns order.
Can anybody help me out?
Thanks advance

Hi,
All you have done is right. just assign the other pricing proceduere which you created for the document re.
To the combination of sales orgdistribution chaneldivision + cpp( in customer master)+ dpp( for the document re )
So now when you create with the re doument you will automatically get that pricing procedure.
hope this solves.
regrds\
preetham

Condition type is not coming automatically

Hi,
There is a condition type JECS (A/R Education Cess) and access sequence is MWST, in normal order it is coming automatically but in other order type (Subsequence delivery free of charge - SD) I have to put it manually that means it is not coming automatically.
Please guide me how I can resolve this issue
Regards
Yogesh

I dont know what exactly you want. You want the condition type JECS to flow automatically or manually for Subsequent Delivery Free of Charge ??
If you want to flow automatically, then, assuming that you have a different pricing procedure for Free of Charge Delivery, check in your pricing procedure for this where against the condition type JECS, the box "Manual" would have been ticked. You have to change it to Mandatory
thanks
G. Lakshmipathi

New VAT Condition Type

Hi Friends,
There is a business requirement to add a VAT Condition type where user should be allowed to add the amount manually whatever it would be. I have created a condition type by copying standard conditon type which belongs to TAX category and kept the following settings
Condition Class - 'D' Taxes
Cal Type - 'A' Percentage
Cond.Catg - 'D' Taxes
Rounding Rule - ' ' Commercial.
Under Tab - Changes which can be made
Manual Entries - 'C' Manual entries has priority
Item Condt - Checked
Amount/Perc - Checked
Rest all settings same.
I added this condition type in the Pricing Procedure.
Problem is the TAX condition type is not populating automatically in Pricing Condition. Secondly the Condition Value field is disabled. If this will be disabled then how the User will enter the TAX manually. Third i would like to know which Account Key shoiuld be used.
Please help. I am working on Pricing for the first time.

Hi,
1.You have maintained field manual entries as manual entry has priority then how it would come automatically into sales order?
Please share this condition type settings in pricing procedure
2.Share screen shot of condition tab of sales order with that condition type
3.It is depends upon you because there are many account keys related to tax like TX1,TX2 and TX3 etc. ( but what ever you are taking account keys in pricing procedure ,for them you have to maintain G/L's in OB40).
BR's,
Naren

Expense condition type does not transfer to CO-PA

Dear guru,
My client would like to post expense (ex. promotion expense) via sales order, then SD consultant create condition type and assign expense G/L to this condition type and I assign this condition type to value field via tcode KE4I. When we create sales order and use this condition type, value of this condition type is not transfered to the value field. I set cost element with category '1'. I know standard is not support for this situation. Please kindly to suggest me for solve the problem 'How do expense value of condition type from sales order will be transfered to CO-PA', example user exit or others.
Thanks in advance.
Regards,
Nattakarn.

Hi
Changing the cost element category to 12 can be done only at the begining of the fiscal year as follows
But if promotional expenses is already created as a cost element with say category 1, now if you want too change it you might get an error KS134 Field change CElem Category is not possible (transaction data already exists)
Hence use TCode KA02, Edit->Analysis Period, Click other analysis period provide from begining of fiscal year to 12/31/9999.
You might have to create a new GL Account cost element if you want to go ahead with the changes in middle of the fiscal year
Regards,
Suraj

Condition type is not get in the PO output

Hi,
I have defined a new condition type ZRA0- Discount as discount charges .
The condition type is not getting print out in PO copy.
The vendor wants to see in the PO copy.
Pls suggest how to configure
Regards
Sp

Hi,
If i understood your problem, you would like to print the discount in PO print copy along with price.ok.
then check with your Abaper,he can fetch the Discount value for that perticular condition type(ZRA0) & print in the PO copy.Its depends on the print programme to get the data from the document to the print out.
Regds

ZPRS- Cost(data source H) condition type is not visible in CRM sales order

Hi Colleagues,
I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
Can any body help me in this issue.
Tanks and Best Regards,
Rajeswari

Hi Michael ,
Thank you very much for your answer. I just require one more confirmation from you.
Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
Could you please confirm it.
Thanks in advance for your help.
Best Regards,
Rajeswari

Condition type is not reflecting in sales orders

hi,
i have created two condition type like jser (service tax) and other one is jste(service tax +cess) but in pricing procedure jfact it is reflecting but while making contract order these two condition type is not accessing.
please help in this connection.

Hi,
After Creating the CONDITION TYPES you need to assign the condition types in the PRICING PROCEDURE
goto the
SPRO->FINANCIALACCOUNTING>FINANCIAL ACCONTING& GLOBAL SETTINGS>TAX ON SALES /PURCHASE>BASIC SETTINGS--->CHECK CALCULATION PROCEDURE.
Here select you procedure and assign the CONDITION TYPE
regards,
santosh

Scrap Sales-VAT Condition Type Not Copying into Billing Document.

Dear All
I am facing problem while billing a scrap sales order.
1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
Naturally, when I am doing analysis, only PR00 condition type is showing.
Kindly require your suggestion as to where I might have gone wrong.
Thanks and Regards
Adithya

Prasanna,
It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
Thanks and Regards
Adithya

Additional Branch Condition Type in but not documented in HTMLDB UG v1.6

I would like to understand this condition type for Branch processing:
When Process in Comma Delimited List of Process IDs Has Run
How are Process IDs known? Could an example using this condition be provided?
Thanks,
Kelly

Kelly - This is a condition type available everywhere, not just for branches. However, it has never been implemented. It is an error that we make it available in these LOVs.
Scott

Additional RFQ Condition Types

Dear All ,
         I am trying to create a RFQ .The condition types I can find init to maintain are
P000 : Gross Price
R000 : Discount On gross
R001 : Discount Of quantity
R002 : Absolute Discount
R003 : Discount % on net
           But my client requires more condition types like Packing & Forwarding ,Excise , CESS , VAT /CST , FREIGHT .
           I want to know how I will enter these condition types in RFQ . How RFQ is having this procedure ? This is not picked from vendor schema group .

Hi,
You will get this condition types while entring the Quotation in ME47 transaction based on the vendor.
Regards,
Bharat.

While creating sto i need to create a vat condition type.

Hi friends.
I am creating a STO mm-pricing procedure.
Supplying plant: goa
Receiving plant: UK
I need to create a condition type for VAT 17.5%. to be paid at customs .subsequently refund will be received on assessable value ( Base value).
Hence it is not to be inventorised.
Please give me steps how to configure. and from which condition type to be copied.
Thanks
sitaram

Hi,
What is the taxation procedure you are using ( Taxinn or Taxinj ).
Why do you feel it is different from the regular purchase.
If it is of Taxinj, maintain the same Tax code which comprises of VAT as 17.5% under the invoice tab of PO.
If it is of TAXINN, then maintain conditions for JVRD ie deductable VAT condiiton.
Regards,
DilL

Error while posting in accounts: Condition type does not exist in COPA

Hi,
I'm trying to post an invoice into accounts but I'm constantly encountering a Error message as : Assign condition type in COPA.
This error is appearing whenever I'm assigning the pricing procedure and KOFK account entries to a new sales organization.
The error does not appear for my previous Sales org. Also I check with the COPA settings, it does not allow us to enter the condition type mentioned in the error.
Could anyone suggest a solution
Regards
Rasheed

Dear Customer,
To solve error KE391, the corresponding value field assignment
must be done in transaction KE4IM.
Currently, the value field assignment is available for this
condition type in transaction KE4I (SD conditions assignment).
In this case you have to maintain the assignment to a value field in
transaction KE4IM. After including the corresponding assignment in
KE4IM, the error KE391 should not come anymore.
Please, check this.
I hope that the information are helpful.
With best regards
Claudia Neudeck

Additional VAT condition type is not flowing to PO

Similar Messages

Maybe you are looking for