Address - endaddress - Blank line comming in betweeen

I am printing an address in sap script using
ADDRESS DELIVERY PARAGRAPH DF LINES 14
ADDRESSNUMBER &Z_ADRNRPO(K)&
FROMCOUNTRY &Z_ALAND1&
ENDADDRESS
I am getting the output something like .
Firma
Schneider & Co
Finanzberatung
Postfach 12345
68499 Mannheim
See after ,Postfach 12345', there is a blank space comming.
Is there any way to remove it .
The address should print like
Firma
Schneider & Co
Finanzberatung
Postfach 12345
68499 Mannheim
That is without a blank line in between.
Thanks in advance .

Check the paragraph format that is applied on this address and in paragraph format select check boxes called No blank line.
I guess it will solve your issue.
Reward points to all useful answers.
Regards,
SaiRam

Similar Messages

Multi-line Address With Blank Line

Using the multiline address and the input conforms to the guidelines.
1.     [Name] [Department]
2.     Firm   [Department]
3.     [Dual_Address]   [Secondary_Address]
4.     Primary_Address   [Secondary_Address]
5.     CITY    STATE ZIP [ZIP+4] [COUNTRY]
6.     [ZIP]   [ZIP+4]    [COUNTRY]
However, when passing address lines 1-5 to ACE where address line 1 is the name, address line 2 is 'C/O' information, address line 3 is the primary address, suite # is address line 4, and city/state/zip is address line 5, ACE is concatenating the primary address and suite and placing it in the address line 4. Thus, whenever the address prints on the bill I'm getting a blank line printing between my C/O line and my address information. I thought that the multi-line kept the data together as a complete address? Is this not correct? If not how would I then get rid of the blank that is being generated?

Greetings Angela,
I would suggest that you check the settings in the Multiline Style block for Address Standardization style. There are settings available here for combining address data. Verfiy which ones you have enabled. Also in this same block is a setting for Swap Address Line, which controls where blank lines will be moved for output.
If you require more detailed information regarding this, I would recommend that you log an incident via the SAP Service Marketplace (service.sap.com), so that support can provide assistance with researching this issue.
You will need your S-User login information in order to log an incident.
When creating the incident, make sure to enter the component BOJ-EIM-COR so that your question is directed to the correct support team for << product name>>.
Rob Siegele
Forum Moderator
Technical Support Engineer
AGS Primary Support, Business User
SAP America

Blank line in address display for country mexico

Hi All,
I am using address node to print the addrees using address no in smart forms. It is working fine but when the country is mexico the one blan line is printing after street address.
Please let me know how to avoid blank lines.
Your quick responses are higly appriciated and points will be rewarded as well.

Hi Venkat,
Try using ADDRESS-ENDADDRESS for the address text element:
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
Regards,
Ravi

Blank line in SAP-Script Address

Hi all,
I'm desparatly seaching for a way to leave a blank line in a SAP-Script Address (sender Germany, address Germany) between the street (or PO-BOX) and the postcode - town line.
I'm using the SAP-Script address command:
/: ADDRESS
/: ENDADDRESS
In OY01 address-format for Germay is "015".
Everything I tried leaves to:
"Name
Straße
PLZ Ort"
but my customer wants:
"Name
Straße
PLZ Ort"
Help is appreciated.
Thanks.

Hi Norman,
Ok. I got it . It is my mistake I though you need blank lines.
OK, in ADDRESS formating .
Please try command "/" or 'add a default paragraph Example : TD " between your entries.
Lanka

Blank lines while printing Address

Hi,
We are facing an issue in smartforms w.r.t address display.
We are passing address number which will get all the fields relevant for displaying, but a blank line is coming between two fields for the same address number( Say the fields are "Street/House No" & "PostalCode/City") which should not come.
In Scripts, we can remove this using the option "No Blank Lines". Is there anything similar to that in forms?
Please provide solution if you have any for this.
Thanks in Advance,
Anand Raj Kuruba.

Use program lines and write your conditions to remove the blank lines.
rgds,
sairam

No blank line between address node in smartform

hi all ,
customer want to delete the blank line between address , is there a way to solve this ? i just want to use the address node.
regards
Kevin

For the paragraph format used with the ADDRESS command, indicate that you don't want blank lines.
Eg. /: ADDRESS PARAGRAPH ZD
So for this Paragraph Format 'ZD' check the checkbox 'No Blank Lines'.

TB 31.4 when compsing a message, has introduced a spurious blank line between the address boxes and subject box.

When writing a new message I used to see two lines of address boxes followed by the subject line. So, when sending an email to a single recipient, that persons address would remain on screen as I composed the email.
As of version 31.4 the initial "Write" window shows a single address line, the subject line, and a blank line between them. The consequence is that, upon entering the recipient's address, it immediately scrolls up and can no longer be seen. This happens regardless of how I enter the address i.e. start to type, select from address book and hit ENTER or TAB, or indeed if I choose an address from the address book sidebar. (See "capture1.png")
If I increase the space available for the header data in the "Write" window I still get a blank line between the address lines and the subject line (see "capture2.png"). Furthermore, the next time I go to compose an email I am back with the original version of the "Write" window, as shown in "capture1.png".

You might want to drop the author an email and let him know. It is not a major thing, but something that would probably require only a minor fix.
I have found him helpful, but slow to reply. He is always on holidays when I email him.

Thousands of blank lines in code view? Where did they come from?

I have an older DW site, that for some reason when I open certain pages in code view show literally thousands of blank lines. So line 1, code, line 2-15 are blank, then what used to be line 2 of the code, is now line 16. All the way down the line. This one page literally has THOUSANDS of blank lines in it:
Aurora Prom Corsages, Boutonnieres, Flowers, School Dance Flowers-Yorkville, Osego Illinois
page renders, edits and looks fine in DW, browsers, etc.
My client edits it with Contribute. I use DW.
There are certain pages he opens regularly, never saw the lines, other pages, just opens once a year, lines all over again.
We can't find any rhyme or reason to it.
Has anyone ever seen this?

Try opening one of those pages in DW and then go to Commands > Apply Source Formatting and see if that cleans them out.
I've heard of a bug where adding html comments can cause added blank lines in certain versions, I've never seen it myself though.

How come when I use "Space before" in a paragraph style, it will only put the space in if i have a blank line above it. Shouldn't it do this regardless?

Maybe I'm missing something, but it seems to me that if I have a style with a "space before" setting of, for example, 21p, i should be able to put text into a new text box and have that text with the style applied pop down the page. It doesn't do this. I can make it work by just hitting "enter" and having a blank line in front of it, but in my mind this shouldn't be necessary. What am I doing wrong?

That's expected behavior. If the text spans columns or pages you wouldn't want a space above if a new column started with a paragraph at the top. Like this where you want the 2nd column to align with the others:

ADDRESS ENDADDRESS IN SAPSCRIPT

Hi,
Can we rearrange the fields being printed in PO layout? The form used the ADDRESS ENDADDRESS syntax. Only the Addressnumber was populated. After printing the form, the arrangement of fields were
STREET CITY
COUNTRY POSTAL_CODE CITY2.
I want to rearrange it to be:
STREET
COUNTRY POSTAL_CODE CITY.
How can I do this? And where can I do this if this is possible?
Thanks in advance.
Lalyn

Hi,
the formatting of an adress depends on the value belonging tot COUNTRY.
SO i do not think the way you want is possible.
Below include some help. Read and take the best solution for it
ADDRESS: Formatting of addresses
The command ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in the parameter COUNTRY. The reference fields are described in the structure ADRS. Both constants and symbols can be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: STREET street
/: POBOX PO box [CODE zip code]
/: POSTCODE zip code
/: CITY town1[,town2]
/: REGION region
/: COUNTRY country
/: FROMCOUNTRY from country
/: ENDADDRESS
Both formatting data and address data are parameters. Address data is formatted for output based on the COUNTRY, PRIORITY and LINES parameters. As the default, the P.O. Box is used, if it is available, rather than the street address.
     DELIVERY defines the street address.
     If this parameter is selected, the system prints the street address on the layout output instead of the P.O. Box.
     PARAGRAPH defines in which paragraph format the address is output.
     If the parameter is not defined, the address is output in the default paragraph format.
     PRIORITY defines which address lines can be omitted if there is not enough space on the output.
     You can enter a combination of the following values:
     A     form of address
     P     mandatory blank line 1
     Q     mandatory blank line 2
     2     name2
     3     name3
     4     name4
     L     country name
     S     line for the street
     O     line for the city
     LINES define how many lines are available to format the address.
If the address data cannot be completely formatted due to an insufficient number of lines, the data entered in the parameter PRIORITY is omitted. If the LINES specification is missing and this command is in a form window whose type is not MAIN, the lines available for the address layout are automatically calculated with the current output line item and window size.
     TITLE is a required form of address.
     NAME means that up to four separate names, separated by commas, can be defined.
     STREET means the street specification, including address number.
     POBOX is the Post Office box number.
     CODE is the P.O. box, postal, or zip code, if this code is different from the postal code of the city.
     POSTCODE is cityu2019s postal, or zip, code.
     CITY means that up to two place names can be defined.
     REGION determines the administrative area.
     COUNTRY specifies the country based on specific postal standards and the address format.
     FROMCOUNTRY defines in which language the destination countryu2019s name is formatted. In EEC countries, only the international country identification letter is placed, with a hyphen, before the postal code.
Gr., Frank

Suppress embedded field blank lines in Crystal Reports XI is not working

Hi,
We have a text box in a Crytal Reports XI report which has address information in it as follows:
These are individual fields from the database. We check the "suppress embedded field blank lines" option for the text box and preview it in the designer and the suppression works as expected in that when the unit field is blank the whole address line isn't suppressed. However when we run this report using the Report Viewer control in a VB.NET 2005 application the whole address line is suppressed when the unit field is blank.
This appears to be a bug in the suppression logic when the Report Viewer is used to view a report. While yes we can embed a formula into the address line this adds extra maintenance and confusion which is not necessary as it works as expected in the report designer.
I have seen others which are having a similiar issue and the only suggestions are to create your own suppression using formulas, etc. which is only a bandaid and is not the best solution as the suppression works as stated in the designer but not in the viewer embedded in an application. Please indicate if this is a known bug and if this issue has been addressed and fixed in a new merge module.
We are running Crystal XI 11.5.0.313 for the report designer and have deployed the needed dlls to run the reports with our application using the CrystalReports11_5_NET_2005.msm merge module.
Thanks in advance for any assistance in resolving this issue!

Hello,
Moved to .NET SDK forum.
Upgrade to XI R2 SP 6, you are using the original release:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
And the distribution files are for Visual Studio version of Cr, not R2 build.
https://smpdl.sap-ag.de/~sapidp/012002523100013451312010E/crxir2_fp64_server_ins.zip
Or
https://smpdl.sap-ag.de/~sapidp/012002523100013451332010E/crxir2_fp64_net_mm.zip
Don

I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
Waht to do ?

Hello lohmann8,
Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am trying to display three lines of text but blank lines are being inserted between them.

I have a section on the right side of my homepage for upcoming events. It was displaying fine until I changed the data and now the three lines are displaying blank lines between each one.
Here is the code.
<h2 class="meeting"> </h2>
      <h2 class="meeting"><a href="http://www.astm.org/MEETINGS/filtrexx40.cgi?+-P+TERM+D02+searchresults.frm">ASTM D02 2014</a></h2>
   <img class="news-image" src="images/news/Sheraton San Diego.jpg" width="100" height="61" />
   <p class="news-text">December 7-11, 2014</p>
      <p>Sheraton San Diego Hotel and Marina</p>
      <p>San Diego, CA</p>
</div>
ASTM D02 2014
December 7-11, 2014
Sheraton San Diego Hotel and Marina
San Diego, CA
The picture is displaying to the right but I want to get rid of the blank lines between the text. I am using Dreamweaver CS5 Version 11.0 Please help.

Sorry I inserted the wrong code.
<div id="rightsideUpcomingevents">
   <h2 class="upcoming">Upcoming Events</h2>
      <h2 class="meeting"><a href="http://www.gulfcoastconference.com">Gulf Coast Conference</a></h2>
   <img class="news-image" src="images/news/hotel_moody.jpg" width="100" height="61" />
   <p class="news-text">October 14-15, 2014</p>
      <p class="news-text">Moody Gardens Convention Center</p>
      <p class="news-text">Galveston, TX</p>
      <h2 class="meeting"> </h2>
      <h2 class="meeting"><a href="http://www.astm.org/MEETINGS/filtrexx40.cgi?+-P+TERM+D02+searchresults.frm">ASTM D02 2014</a></h2>
   <img class="news-image" src="images/news/Sheraton San Diego.jpg" width="100" height="61" />
   <p class="news-text">December 7-11, 2014</p>
      <p class="news-text">Sheraton San Diego Hotel and Marina</p>
      <p class="news-text">San Diego, CA</p>
</div>
.rightside-text
{padding:0px; color:#172B61;}
.news-image {float:right; margin-right:10px; }
.news-text { padding:0px; color:#000;}

Blank line in text file after download

Hi all,
i am using the below code to get the 254 blank spaces at the end of the text file & it's comming correctly.
generally i am downloading 2 lines in the original program & i am getting one blank line in between these two lines.
The main thing is that i am getting this blank line when i run this program in my office computer. But i am not getting this blank line when i run this same program in my home laptop. Please suggest why this blank line is appearing & any solution ?
DATA: BEGIN OF OUTTAB OCCURS 100,
        PROD_CODE(3),
        LINE_DETL(2043),
      END OF OUTTAB.
DATA:V_OUTPUT(2043).
DATA: space_character type c.
space_character = CL_ABAP_CHAR_UTILITIES=>MINCHAR.
        DO 254 times.
           CONCATENATE V_OUTPUT space_character INTO V_OUTPUT.
           ENDDO.
           OUTTAB-LINE_DETL = V_OUTPUT.APPEND OUTTAB.
call function 'GUI_DOWNLOAD'
   EXPORTING
      filename = OUTFILE1
      filetype = 'ASC'
      TABLES
      data_tab = OUTTAB

I don't think this is issue of ABAP. Any way just to check download the file on laptop and open same file and office computer
if file looks ok then it is OS or text editor issue.
Thanks,
AK.

How to supress blank lines in smartforms...

Hello Experts,
I am showing the address of the customer in my form but I noticed that when a variable doesn't have a
value, it still shows as a blank line. For example:
Customer 123
<--- I want to remove this line
San Francisco, California.
How can we do this guys?
Thank you and take care!

Hi Viraylab,
There are two ways by which you might clear this issue.
1. If you have created a template for the same and under that, if you have created separate rows for each field/group of fields, then you need to remove those rows, as the blank row will be displayed as it is.
2. You can directly write the code for the condense using the statement CONDENSE wa_field.
Regards,
-Syed.
Edited by: wahid hussain syed on Dec 16, 2008 11:17 AM

Address - endaddress - Blank line comming in betweeen

Similar Messages

Maybe you are looking for