Address Update

Good day Experts,
I have implemented "Country Specific Address Formats" according to the Development and Extension guide on our project.
The client needs to be able to update his postal address which is different to his residential address.
I've extended AddressBeanImpl to display the PoBox and PoBoxCit and PostlCod2 on my addresslayoutView03 form. This works 100%. But when I update these fields, the PoBoxCit and PostlCod2 does not update back to CRM, only the poBox.
I see that in AddressImpl, there is no poBoxCit_X in the class. I s there a reason for this? And how can I easily get that to work without extending a lot of classes and interfaces?
Regards,
Leon

Hi,
Issue resolved.
Had to do some coding to make it work.
Regards
Leon

Similar Messages

  • No vendor addresses update in PO.

    No vendor addresses update in PO. how to solve this issue?

    Hi
    Check whether vendor is one time vendor or regular vendor .
    I it is one time vendor you have to give adderess in PO
    Edited by: Sanjay  Shah on Feb 3, 2010 2:09 PM

  • Address Updated Externally. Changes will be lost and the viewer closed.

    I find this solution,http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=23399 and have a try, but there is no change,the problem is still appeat again and again, so terrible.
    And in this page http://forums.crackberry.com/f79/address-updated-externally-error-56528/, the same problem is exsit too, and I have skim it but to find no usefu informatin at all.
    Is there someone could help?
    Thanks

    v5.0.0.423 (Platform 5.1.0.116)

  • SRM AND SAP R/3 ADDRESS UPDATE PROBLEM

    HI,
    i create a purchase order in SRM SYSTEM i seen this purchase order in SAP R/3 address is not update properaly in SAP R\3   like postal code, city etc.
    SAP R/3 IS TAKE A DIFFERENT ADDRESS RESPECT TO SAM SYSTEM
    PLASE GIVE ME A SOULATION ASAP.
    THANKS
    VIKASH

    Hi,
    I was talking about the Ship to address in shopping cart which should appear in the PO in R/3, which is not appearing, instead the PO is showing the address of the valuation area present in R/3. For your kind information, I am working on Classic Scenario.
    Regards,
    Vikas

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Employee Address updatas after approved

    Hi frds
    Im Working on the PA30 for infotype - 6(Address Change).My Requirement is when the employee update the address and click the save button ,workflow should trigger and the address should not update in the database table(SE11-PA0006) ..
    Workitem will goto HR Approver 1and HR Approver 2.Once Both approver approved the data should updated or its should not update.If any HR rejected the Req. the employee address should not change the address in database level.
    Thanks
    Pari

    I don't think that you can assume that the user could enter the new address in PA30, butt the actual address in database would not be updated. Or sure this could be possible with some heavy customization&enhancements.
    You should consider this from another perspective. The user should have a separate application/transaction or form (or whatever) for doing a request for address change (and not be able to change the address directly in PA30). Then this request would trigger a workflow, and only after the approval/checking of this request by the admins, the infotype should be updated with new address.
    You could take a look into ISR scenarios or possibly even HCM processes and forms scenario, if you have an option to use interactive Adobe forms. And of course Z-tables work always...
    Regards,
    Karri

  • BP Address Update

    Hi there,
    i going to update the address data in the bp master. I need to know how to update the "default" bill / shipping address. If i use "linenumber" 1, the system returns a error (value already exists).
    Anyone an idea how to update the address data ?
    regards

    Dear Steffen,
    Please refer to Note : 899093 and 979116 to get the details information about
    How to use LineNum when update Addresses via the DTW.
    Regards,
    Rakesh Pati
    SAP Business One Forum Team

  • Delivery address updating based on Plant in ME21N

    Dear All,
    My requirement: I have a plant consider 0900, we have updated the plant address in MEAN Tcode.
    I can see an entry in ADRC table, but while creating the PO in ME21N by giving the plant as 0900, system is fetching
    the old address, not the new address.
    Please suggest me the solution and if any code.
    Thanks in Advance
    Sandeep.

    Hi Felipe,
    I have done the coding like this, please let me know if i am wrong.
      DATA: ls_mepoitem    TYPE mepoitem,
            ls_mepoitemx   TYPE mepoitemx,
            ls_mepoheader  TYPE REF TO if_purchase_order_mm,
            ls_mepoheader2 TYPE mepoheader,
            header         TYPE ekko,
            lv_adrnr       TYPE adrnr,
            ls_ekpo        TYPE ekpo,
            ls_adrc        TYPE adrc,
            ls_cmmda       TYPE cmmda.
      ls_mepoheader  =  im_item->get_header( ).
      ls_mepoheader2 =  ls_mepoheader->get_data( ).
      ls_mepoitem    =  im_item->get_data( ).
      IF ls_mepoitem-adrn2 IS INITIAL AND
         ls_mepoitem-lgort IS NOT INITIAL AND
         ls_mepoitem-werks = '0900'.
        SELECT SINGLE *
         FROM ekpo
         INTO ls_ekpo
          WHERE werks = ls_mepoitem-werks
    *      AND ekgrp = ls_mepoheader2-ekgrp
          AND wepos = ls_mepoitem-wepos.
    *      and adrn2 = ls_mepoitem-adrn2.
        ls_ekpo-adrn2 = '00091647'.
        IF sy-subrc = 0.
          ls_mepoitem-adrn2 = ls_ekpo-adrn2.
          CALL METHOD im_item->set_data
            EXPORTING
              im_data = ls_mepoitem.
        ENDIF.

  • Address update service in Teammate Self Service

    When UK employees update their addresses via the MySAP Portal Teammate Self Service the following error occurs  "Enter both the communication key and number".  I cannot find what is causing this error.

    Hi,
    That means you have not mentioned the Communication type for this employee, go to IT0105 and maintain the Subtype 1, that is system User name and the email id of the employee.
    Good Luck
    Om

  • Itunes stops responding during address update

    I have Windows 7 Enterprise.  My iTunes app was updated this morning.  So here is what I do...  Launch iTunes > Store > View Account > Edit Billing address > iTunes stops working....  OVER and OVER again...
    I have turned off my AVG software, I have added the recommened sites to the Trusted domain list.  I have uninstalled and installed and repaired iTunes.  Still the exact same issue. 
    Any help would be nice.

    I followed the instrucstions to delete the .ssidd and .ssibd files this did not correct the problem.

  • Customer Email Address Update

    Hi People,
    Could anyone let me know how can Cusomter Email Address be updated in R/3 without using BDC and LSMW? Is there any function module specifically to update email address of a customer?
    Cheers

    Hi,
    Use the below BAPI
    'BAPI_CUSTOMER_CHANGEFROMDATA1'
    Regards
    Sudheer

  • Computer authorized to old (defunct email address), updated Adobe ID.  Digital Editions (reinstalled twice)  won't decrypt and add downloaded PDF books

    iMac Intel running OS 10.6.8   I downloaded purchased books from Google Play/Books in EPUB and PDF.  They are encrypted (.pdf.acsm).  Adobe Digital Editions reader will not add them to my library because, I suspect, my computer is authorized with an Adobe ID that uses a now defunct email address.  I have updated my ID on the Adobe web site, redownloaded and reinstalled Adobe Digital Editions but my computer remains authorized to the old Adobe ID.  How do I decrypt these purchased books and read them in Adobe Digital Editions on my computer? 

    Ok so, I finally managed to remove the failed activation and then I reactivated after which I could read the ebook.
    I used this method here: I can't de authorize my computer. It just keeps saying to try again later.
    to deactivate, and then repeated the activation process.
    Adobe, surely many many people have this problem with a new install, and to have to resort to editing the registry in order to fix it is just madness.
    Why does the activation fail the first time, and why then does deactivation also fail? PLEASE FIX YOUR PRODUCTS.

  • What is the web address updates from MAC?

    I am in the company, but the internet here is locked!.
    I need to know the mac address that accesses to update the Lion 10.7.3 -> 10.7.4 ... so I can release the address to update the mac.
    (Google/Translator)

    Thanks Matt, your help was very useful!
    I put the address "http://support.apple.com" sites here in the release of the company, and managed to update the mac (Software Updates) without problems ...
    Have a great week!
    (Google/Translator)

  • Address updation in PR

    Dear Experts,
    we are in SRM 7.0 and ECC 4.7E.
    i have created an additional Address number in portal  and assigned the same in org strcture.i made this address as default too.when PR is created in backend system. system is not considering the address which i have maintained ,instead it is taking the plant address .
    when i create  a SC through catalog ,system creates a PO(as per our business requirement) and it takes the address which i have maintained in the org strcture.
    Can anyone suggest me what could be the possible reasons why system picks plant address for PR even though i have mantained address number in org strcture?
    i need the address maintained in the address number to be taken for PR too? please give your valuable inputs
    regards
    robos

    Hello,
    If you are creating the PR from the shopping cart and delivery address is not transferred to ECC, check if note 984211 is implemented in your system. If so, remove it.
    This note comments out the responsible code for sending the delivery address.
    As per standard, delivery address stored in shopping carts is always transferred from SRM to ECC PO/PR.
    Regards,
    Ricardo

  • Business to Residential Address Update

    Hi, I just moved to my new house (new construction) and tried to transfer my comcast service to this new home. However, I was told my home is with a business address. I contacted the builder and he said my address used to be the address for their construction trailer.  Then I called serveral time to both residential department and business department, but this issue is still not solved. Can someone please correct the information for me. I can provide all information needed (i.e. certificate of occupancy for residential purpose, or settlement information)  Thanks, L

    My only suggestion would be to go to the closest Comcast office and explain the problem there. Bring any documentation you have with you

Maybe you are looking for