ADF 11.1.1.6 with subversion issues

HI
We are using the Jdeveloper verion 11.1.1.6 and Vesion support for Subversion 11.1.6.38.61.92.
Some times we are facing problems on Update and Checkout . some times both of them will not work .
I want to know about the above issues occuring frequently due to the verisons(Jdev and subversion) missmatch ? or any additional configration missing ?
Appriciate responses
thanks in advance.

Hi,
*11g R1*
Subversion 1.5, SVNKit 1.2 --> Certified
Subversion 1.6 2 , SVNKit 1.3 2 --> Certified
*11g R2*
Subversion 1.6, SVNKit 1.3 --> Certified
Frank

Similar Messages

Subversion issue with diagrams

We are noticing a large numbers of issues when it comes to the subversion interface. Of course we are new to the product and may not be doing things correctly. In particular we notice that oftern times not all objects that are added to a diagram show up on another users model when one person commits and the other person updates. For example creating a transformation diagram some times the flows, and the transformation package will not show up in another users model. We got it to work by manually outside of the tool checking in the diagram.local and object.local files. The other users would have to revert those files so that they got a clean file from the repository. This seems hoky. Anyone have tips on how to effectively work with subversion and DFD diagrams?
Thanks

Here are the issues we have noticed with subversion integration:
Subviews don't show up; My buddy creates a subview but when I update the subview does not show up in my list; It looks like the xml file is being synched but it doesn't show up in the tree view navigator.
My buddy creats a new transformation process and it doesn't show up in my tree view navigator; When I get them to show up by using tortisesvn to update and synch up diagrams.local and objects.local then the flows don't synch up;
I have had a couple of cases where I got to a merge dialog box say when we both have updated an entity ; I get a stack trace ; but then the change has not been applied but I also don't get the conflict showing up in the incoming changes window.
Brady

ADFS 3.0 - Web Application Proxy configuration Issue

Hi All,
We are in the process of implementing ADFS 3.0 published to the internet for o365 Federation purposes.
The setup consists of the following
- 2 x windows 2012 R2 running ADFS 3.0 ( only one server presently installed and configured though)
- 2 x Windows 2012 R2 Running Web Application Proxy ( only one server presently installed and configured though ).
There is an F5 Big-IP load-balancer for both internal and external interfaces and it has been configured after a lot of issues with the SNI part on the F5.
So, in short the setup is now a single server hosting ADFS 3.0 using SQL and a single WAP server, however the traffic to these servers are still going through the LB.
Now the issue is that i cannot complete the installation/configuration of the Web Application Proxy server. There is a firewall in between our DMZ and the internal network. I can reach the internal services via the following url and telnet on port 443
to the federation service as well. (ports for 443 and 80) are opened to internal network on the load balancer ip . I can reach https://fs.domain.com/adfs/ls/idpinitiatedsignon.aspx and federationmetadata/2007-06/federationmetadata.xml location as well
from the Web APplication proxy server without any issues or certificate prompts at all.
When i do the configuration for WAP, i use the same account which was used as a service account for the ADFS service internally. If i use a local admin account, it errors out with another message stating the connection was closed.
The certificate on the internal server along with its private key was exported and has been imported on the WAP server . This is not internal CA, instead we are using DIGICERT SSL with SAN Names for enterprise registration and work folders. Hence the CA Chain
issue is ruled out and also this is not a wild card certificate.
When the wizard starts configuring, it does establish the trust with the federation service which is shown up in the event viewer with EventID 391 within 15 seconds i get another event id 422 which states that it cannot retrieve the proxy configuration
and eventid 276 on the Federation server which states the authentication failure. this continues until the servers stops to try configuring the wizard.
I have read all the available threads on the 3.0 WAP installation /configuraiton problem and tried all the steps possible but i am still stuck with this issue.
There is one more part that i noticed on the ADFS server, that the self signed services for the token-encrypting and token decrypting are self-signed certificates. Also, in the certificates it was showing up as not trusted. and i installed them to the TRUSTED
ROOT CERTIFICATION STORE after wich i cannot see any private key showing up when viewing the certificate which means i cannot get the MANAGE PRIVATE keys option when right clicking on the cert to assign read permissions for the ADFS service account.
Should i assign the same SSL sertificate (SAN based for enterpriseregistration & Workfolders) to the token-encrypting and token-decrypting services in ADFS console or should i leave them as self signed ? I did read that self-signed is not recommended for
production environment ? If not the same certificate what are the requirements for the certificate ?
I am not sure what I am missing in the configuration that is causing this issue. The WAP servers are not part of the domain and have also ensured the time synchronization between the domain machine as well.
The service name is fs.domain.com on both the internal and external DNS ( we have domain.com as a zone in DNS internally as well ). I am able to Authenticate inside and from the WAP server when accessing the link.
Could it be a Load Balancer Configuration ? [i will try eliminating this from the configuration]
Let me know if there are any options that i can try to resolve this and get the configuration working.
Cheers,

Does the load balancer pass the certificate session through to the ADFS server or are you offloading SSL. SSL offload does not work with WAP/ADFS integration (at least at the time of writing it does not).
Can you try through the load balancer with SSL pass through turned off please.
Also as ADFS 3.0 (Server 2012 R2) uses Server Name Indication (SNI) then any health checks that run on the load balancer must support this, so if they do not then you need to use TCP 443 checks for a listening port, as doing a standard HTTPS check will fail,
and if the load balancer fails its checks whilst you are configuring ADFS that might be a reason why it has gone offline for you (error 442 is to do with failure to swap client certificates between WAP and ADFS).
Finally, check the June update to Server 2012 R2 (http://support.microsoft.com/kb/2964735) as that has fixed some certificate issues with multiple servers for WAP and ADFS when you don't have the
2012 R2 AD schema in place.
Brian Reid
Exchange MVP and Exchange and Office 365 Certified Master
www.c7solutions.com
Brian Reid C7 Solutions Ltd (www.c7solutions.com)

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

Integrating sql developer with Subversion

Hi all,
I have Oracle SQL Developer (3.1.07) installed on my local windows machine. Using an external tool Tortise SVN as our VCS. Has anyone been able to integrate SQL Developer with TortiseSVN? I have googled and haven't found any relevant docs to help me integrate both. Is this possible at all? We have a configured repository server. TortiseSVN is installed on my machine and is acting as a working directory.
Kindly advice me.
Thanks!

Hi Nick,
it seems that the latest version of SQL Developer is not yet certified to work with Subversion 1.7 and it has some serious problems with it.
Indeed if you have already installed the latest version of TortoiseSVN on your pc, you will have quite a lot of issues in SQL Developer (for example while browsing a working copy on your disk) and weird errors not immediately related with the version control plugin. You may find more details by searching the forum (e.g. see 3.1EA1 File browser bug? ).
The possible solutions are either:
1) install a supported version of TortoiseSVN (1.6 should be fine) and you should be able to perform check-in and check-out from inside SQL Developer;
2) disable the Subversion plugin shipped with SQL Developer and use exclusively TortoiseSVN to manage your working copy;
Currently I am using option 2 and it works fine.
Hope it helps,
Paolo
Edited by: PaoloM on 13-lug-2012 11.42

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Sales orders with credit issues taking availability stock

Hi,
I am doing confirmation using Global ATP in APO. The confirmation is well done, but the confirmed quantity for sales orders with clients that have credit issues is taken the available sotck for other sales orders with ok clients that I want to confirm the quantity they ordered.
For example:
Stock: 10 PC
Client A order 15 PC and 10 are confirmed, but the ordered is retained becuse of credit issues with client A.
Then client B order 3 PC, but nothing is confirmed because the ordered for client A is reserving the stock (note: this would be ok if client A had not credit issues).
So, I want that the 3 PC for client B are confirmed and the 10 PC not reserved for the cient A while client A has credit issues.
How could I configured, so that the orders with credit issues do not reserve stock for the incoming orders?
Thanks a lot.

Hi DB49,
thanks for the quick answer.
I checked the configuration in the R3 and seems to be fine. To prove it, I disconnect APO and did the availability check in the R3 system and it is working fine; the orders quantities that are blocked because of credit issues, do not reserve stock for incoming orders.........son new incoming orders are well confirmed.
But after connecting APO the problem continues. I checked the next points.
In R3 transaction CO09: takes to the APO screen and you see the ATP available quantity OK (do not consider the quantities of the credit issues orders). But at the moment that you make the order (VA01) it does not confirm any stock and if you select the line and go to the ATP screen (the same you get from the CO09) the quantities of credit issues orders are taken into account..the ATP availability quantity changes from the first going directly from the CO09.
What could it be?
Note: it was working fine with APO, I started to have the issue after implementing note 1262475 in APO. This note was becuase the BAPI_APOATP_CHECK was not brigning any value for the ATPQTY_***.
Thanks a lot!!!

Report with grouping issue

I have a report which have year(2008), Category(0-1,2-3, ALL), product(0,1,2,3,4..), % sales. I group by all the category elements and called it as All, I am not getting the right percentage sales for the Category ALL other wise for 0-1,2-3 i am getting it right. Please advise where i am doing it wrong. please find the blog for a screen shot of my issue.
http://ravibiblog.blogspot.com/2012/04/report-with-grouping-issue.html
Thanks,
RC

Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
FARXPBSH Failing With "Program was terminated by signal 11" or "Program was terminated by signal 10"          (Doc ID 742729.1)
Publishing RXAPPYAC: The FARXPBSH Ends With 'Signal 11' Error          (Doc ID 432797.1)
RXi RX Reports Failing With Program Was Terminated By Signal 10 or 11 Errors After FA Rollup Patch 6          (Doc ID 737963.1)
Program was Terminated by Signal 11 when Running Rxi Reports          (Doc ID 559425.1)
HTH
Srini

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

Reset the TC to factory and start again.
Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
I also recommend different names for the different bands.
So for example.
TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
WIreless name.. TC24ghz for 2.4ghz
TC5ghz for 5ghz
You can also set the channel manually.
If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

A suggestion for those with battery issues:

When I first got my iPhone, I had the same battery issues many people here are talking about, in fact I posted about it myself. Its fixed. Very fixed, and Im very happy with my battery life. Here is what I did.
First, do not charge it using your USB connection. At least not always. Why? I dont know. I did the first few days, and couldnt get a full charge even tho system wasnt going to sleep. I started using the wall charger, and got longer battery life, but still not great. One night, I forwarded the phone to my home phone in case I got a call, and shut the phone down completely, and put it on charge. In the morning, I woke up to a 100% charged, fully glowing battery icon. The battery lasted all day with no issues. Every night after that, I just charged it on the wall charger, but did NOT shut it down to see what happened. I am still waking up every morning to a 100% fully charged battery. The battery life seems to get better daily now.
Today, I ran wifi for about 5 hours because I forgot to shut it off. This was after going to the pool and listening to the iPod on the phone for about 2 hours. And using the phone normally throughout the day, checking mail, sms, etc. Really a full day of work, and my battery is still over 50% full. I purposely didnt connect it to anything during the day for a recharge, not the USB or wall charger.
Good luck, hope this helps. Id be interested to know if it does.

Here's my non-scientific experiment.
After surprising battery drain for the first 10 days or so with not much usage, I completely drained the battery yesterday until the phone shut off.
I plugged into AC charge and was worried when it didn't seem to even begin charging.
I plugged into USB, assuming it needed to charge enough to at least complete a sync.
I left it on USB until about 5-10% charge, then switched it to AC. At about 50% I needed to use it, so I did but sparingly, and put it back on charge, all the while keeping Mail on manual and WiFi off.
I took it off once more to get it home from the office, then plugged into AC.
I left that charging overnight.
I never actually got the "glow", but did get the plug icon showing full charge in the status bar.
After about 2 1/2 hours this morning, the status has not moved off of 100% (but with little usage as before).
This is definitely an improvement already though. Hope this helps.

ADF 11.1.1.6 with subversion issues

Similar Messages

Maybe you are looking for