ADF application hangs after $$added root$$ message in the logs

Hi ADF Gurus,
We have an ADF application which freezes after we create a row in a particular VO,
When debugged in Jdev, the application seems to hang when either of the below log messages appear. Does anybody know what these messages mean? Just hoping for some hint as to where the problem might lie. The table where the new row is added has about 150,000 records in it
Log messages:
<PCollNode> <checkForSplit> [50545] $$added root$$ id=-2
<PCollNode> <checkForSplit> [50546] $$added root$$ id=-73
<PCollNode> <checkForSplit> [50636] $$added root$$ id=-2559
Environment details:
Jdev: 11.1.1.5.0
Database:11g
Thanks
-Venkat

duplicate post: ADF application hangs after $$added root$$ message in the logs

Similar Messages

Problem in reading data from serial port continuously- application hangs after sometimes

I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Scanning.vi ‏39 KB

billko wrote:
Ranjeet_Singh wrote:
I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
What do you mean, "not fixed?" If there is no termination character, no start/stop character(s) or even a consistent data length, then how can you really be sure when the data starts and stops?
I probably misunderstood you though. Assuming the last case is not ture - there is a certain length to the data - then you should use the bytes at port, like in the otherwise disastrous serial port read example. In this case, it's NOT disastrous. You have to make sure that you read all the data that came through. Right now you have no idea how much data you just read. Also, if this is streaming data, you might want to break it out into a producer/consumer design pattern.
Not fixed means order is not fixed, data from any com port can come anytime. lenght is fixed, one com port have 14 byte and other 8 byte fixed..
Reading data is not an issue for me as it works nice but I have a query that why my application hangs after sometime and stops reading data from COM PORT.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

I have a problem I'm trying to buy in a particular application, but show me a message as the picture We have allowed the purchase of applications and still show me message " your purchase could not be completed " for assistance contact itunes

I have a problem I'm trying to buy in a particular application, but show me a message as the picture We have allowed the purchase of applications and still show me message " your purchase could not be completed " for assistance contact itunes

Then do as the message says and contact Apple
ITUNES SUPPORT BILLINGS etc
http://www.apple.com/emea/support/itunes/contact.html or https://expresslane.apple.com/Issues.action

When I try to setup my iCloud, after adding my AppleID & password, the next screen is the EULA (with an Agree and a Disagree button) - I press Agree - Nothing happens. It appears to freeze.

When I try to setup my iCloud, after adding my AppleID & password, the next screen is the EULA (with an Agree and a Disagree button) - I press Agree - Nothing happens. It appears to freeze. This phone was previously owned and the last owner's apple id is what defaults... I do not know the last owner's password. - I just want to get rid of that person's iCloud in order to create my own with my own account.

With iOS 7 you will not be able to delete the iCloud account without providing the password for the iCloud ID. If it is the previous owner's account, you will need to have them remove it from their ID as mentioned in this article: http://support.apple.com/kb/TS4515.

Suppress SEVER _restoreStampState messages in the log

Hi -
Whenever we navigate to the details page in our JHeadstart application, we get these _restoreStampState SEVERE error messages. These messages fill up the log quickly and also the log looks clumsy. Even though the functionality is not breaking - the appearance of this messages is confusing to the customers.
Is there a way to suppress these messages in the log file?
PLEASE HELP.
Thanks,
Saran
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:0
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:1
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:2
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:3
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:4
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:5
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:6
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:7
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:8
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:9
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:10
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:11
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:12
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:13
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:14
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:15
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:16
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:17
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:18
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:19
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:20
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:21
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:22
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:23
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:24
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:25
Aug 3, 2007 2:22:19 PM oracle.adf.view.faces.component.UIXCollection _restoreStampState
SEVERE: There was no initial stamp state for currencyKey:null and currencyKeyForInitialStampState:null and stampId:26

This sounds like a JDeveloper/UIX issue that is not related to JHeadstart. Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ?
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting

Warning Messages to the log

Hi Experts,
I want to send a warning message to the order log , for this I used
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
        EXPORTING
          iv_caller_name = 'ORDER'
          iv_ref_object = iv_guid
          iv_msgno       = 002
          iv_msgid       = 'ZMSG'
          iv_msgty       = 'W'
          iv_cumulate    = 'X'
        EXCEPTIONS
          not_found      = 1
          appl_log_error = 2
          OTHERS         = 3.
MESSAGE ID 'ZMSG' TYPE 'W' NUMBER '002' .
But the problem is order is not saving at all, I want order to be saved and the warning message to be in the log.
Please help me out in this.
Thanks in Advance,
Praveen

I am using it in the BADI_ORDER_SAVE, when I do not add this message to the log the pop up message is coming out fine.
In this FM if I send E to iv_msgty ,its working fine too.The problem is coming only for warning messages.
Your time in replying to this thread will be appreciated.
Thanks in Advnace,
Praveen

One day I just went on my iPod on messages and the log in sign showed up I thought that was weird because I am always logged i so i logged in and it went all the way back to the start! It is the same with FaceTime I do not know what to do?

One day I just went on my iPod on messages and the log in sign showed up I tried logging in and it just brought me all the way back it is the same with FaceTime please help!

Try:
iOS: Troubleshooting FaceTime and iMessage activation

Need to read messages from the log instead of displaying

Hi,
I need to read all the messages from the log with a particular log no..
i was able to display it using FM BAL_DSP_LOG_DISPLAY..But i want to collect the messages instead of displaying..To display according to my requirement..
Thanks in advance

Use this for reading :
BAL_LOG_MSG_READ
Regards
Neha

Application hanging after commit issued, how to tell why?

Hi All,
We're using adf bc, jsp's and jdev 10.1.2.
The scenario is this.. I have 2 views based on the same entity(called Milk). One view is the control view Milk i.e. straightforward select, no where clause. The other one is based on a join with another entity (Area), which uses where clause parameters to output a row of Milk for every entry on the Area entity. So basically for every area there is, a milk row will be output even if that row does not exist on the milk table.
So my problem was when the user edited and saved a row which didn't actually exist on the database, the program would hang. Editing of rows that do exist pose no problem at all. So then I thought maybe I should create these rows first so that they would physically exist on the database before the edit. Still to no avail..
If it's just one row created or many rows, once the commit is issued, the application hangs. I've debugged it and nothing happens once it executes the commit line, there are no error messages, it just never progresses past this line.
I've tested with the App Module tester and I can create rows here fine. Obvisouly something is wrong or it wouldn't be happening. How can I tell why it's hanging? Or can anyone suggest what I can do. It is extremely crucial that I fix this soon so I would really appreciate any help that anyone can give me.
Thanks in advance,
Liz.

Maybe you should look into
/var/log/messages.log
/var/log/daemon.log
/var/log/kernel.log
/var/log/Xorg.0.log will be overridden, afaik.
Last edited by MadTux (2009-11-19 18:50:04)

Weblogic 11g hangs after adding -Xmanagement start parameter

Hi.
I've got very strange problem with Weblogic 11g.
After adding to startup parameter:
-Xmanagement:port=3107,authenticate=false,ssl=false
server hangs during start.
<May 2, 2012 2:45:19 PM> <INFO> <NodeManager> <Server output log file is '/u01/app/Oracle/Middleware/user_projects/domains/jmsZycie/servers/srv1/logs/srv1.out
'>
JAVA Memory arguments: -Xms512m -Xmx512m
WLS Start Mode=Production
CLASSPATH=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R
28.2.2-4.1.0/lib/tools.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.ja
r:/u01/app/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/ap
p/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/a
pp/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/u01/app/Oracle/Middleware/pa
tch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/lib/tools.jar:/u01/app/Ora
cle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/app/Oracle/Middleware/modules/fe
atures/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/app/Oracle/Middleware/modules/org.apache.
ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/Oracle/Middleware
PATH=/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6
.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin:/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Orac
le/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.
0_29-R28.2.2-4.1.0/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
Starting WLS with line:
/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jrockit -Xms512m -Xmx512m -Dweblogic.Name=srv1 -Djava.security.policy=/u01/app/Oracle
/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.system.BootIdentityFile=/u01/app/Oracle/Middleware/user
_projects/domains/jmsZycie/servers/srv1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVeri
fication=false -Dweblogic.ReverseDNSAllowed=false -Xms2048m -Xmx2048m -Xnohup -Xverbose:gcpause,gcreport,memory -Xverify=none -Xmanagement:port=3107,authentic
ate=false,ssl=false -Xss:512k -Xdebug -da -Dplatform.home=/u01/app/Oracle/Middleware/wlserver_10.3 -Dwls.home=/u01/app/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/u01/app/Oracle/Middleware/wlserver_10.3/server -Dweblogic.management.discover=false -Dweblogic.management.server=http://10.2.124.194:7080
-Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default
/sysext_manifest_classpath weblogic.Server
[INFO ][memory ] Running with 32 bit heap and compressed references.
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, strategy: Generational Parallel Mark & Sweep.
[INFO ][memory ] Heap size: 2097152KB, maximal heap size: 2097152KB, nursery size: 1048576KB.
[INFO ][memory ] <start>-<end>: <type> <before>KB-><after>KB (<heap>KB), <time> ms, sum of pauses <pause> ms.
[INFO ][memory ] <start> - start time of collection (seconds since jvm start).
[INFO ][memory ] <type> - OC (old collection) or YC (young collection).
[INFO ][memory ] <end> - end time of collection (seconds since jvm start).
[INFO ][memory ] <before> - memory used by objects before collection (KB).
[INFO ][memory ] <after> - memory used by objects after collection (KB).
[INFO ][memory ] <heap> - size of heap after collection (KB).
[INFO ][memory ] <time> - total time of collection (milliseconds).
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds).
[INFO ][memory ] Run with -Xverbose:gcpause to see individual phases.
[INFO ][mgmnt ] Remote JMX connector started at address poc1:3107
[INFO ][mgmnt ] Local JMX connector started
<May 2, 2012 2:45:22 PM CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable th
is check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 2, 2012 2:45:23 PM CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disab
le this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 2, 2012 2:45:24 PM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.2-7-148152-1.6.0_29-20111221
-2104-linux-x86_64 from Oracle Corporation>
<May 2, 2012 2:45:26 PM CEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<May 2, 2012 2:45:29 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 2, 2012 2:45:29 PM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
And this is it.
I am able to connetct from JRMC. After removing -Xmanagement all is working.

Can you please take a thread dump and copy paste the stack trace for the Thread called "main" thread.
Please take atleast 3 thread dumps with an interval of 10 seconds and paste the "main" thread stack trace from all the 3 thread dumps.
After analyzing the stack trace we might be able to determine where it is hanging and thus giving us a clue where the issue could be.
Arun

Critical ADF application error after deploy to OAS


Hi,


I have a problem with ADF application (10.1.3). It works in JDev but after deploy to OAS 10.1.3 when I try to go to page contains a lot of input texts and 2 tables , I get server error - see it on this image . It is very strange because this application worked earlier - where OAS uses JDK 1.5.0_08. Now JDK was changed for 1.6.0_01 version. J2EE container has allocate 512 RAM memory Is JDK version may be reason of this error ?


Kuba


Hi Kuba,
Do you mean that you changed OAS to use JDK 1.6? I'm pretty sure this wouldn't be supported. If you mean that you used JDK 1.6 to compile the project and then deploy to OAS, I'm pretty sure this wouldn't be supported, either. If you just changed JDeveloper to use JDK 1.6 to run JDev (although for sure this isn't supported), and the project still is targetted to JDK 1.5, this should work. I've had a few sporadic problems in this configuration, though, so I cannot recommend it.
John

My application hangs after 10 hours in the serialport read sub-vi. Why?

My application is programmed under LabView 5.1.1 on a windows 2000 platform.
I use a MOXA RS232 extending module with a B&B RS485- converter.
After 10 hours trouble-free working, the application, using semaphores, hangs in the serialport read sub-vi.
In the same constelation without RS485-converter, once the application hanged up in the serialport write sub-vi. After Restarting LabView I was still not able to access the serial port. So I had to restart the PC.

I am not sure, but it looks for me as some buffer overflow error.
Like you read or write something before it is ready.
Try to play with the lines like DTR and so on.
regards
PP
Isildur wrote:
>
> My application is programmed under LabView 5.1.1 on a windows 2000
> platform.
> I use a MOXA RS232 extending module with a B&B RS485- converter.
> After 10 hours trouble-free working, the application, using
> semaphores, hangs in the serialport read sub-vi.
> In the same constelation without RS485-converter, once the application
> hanged up in the serialport write sub-vi. After Restarting LabView I
> was still not able to access the serial port. So I had to restart the
> PC.

Message application freezing when adding new contact from the messages application

if someone is sending the message with the phone number included in the text, i touch the number and whait till options will pops up, choosing create new contact and ok. then the messages application freezes for a long time... few minutes. have to double press the home button and switch of the message app from the background. So have to start message app again to be able to use it. How to sort this? Its happening more than one year and have changed few phones already.

Snow Leopard and iCloud compatibility is very limited, and it may be that the phone's OS requires iCloud for the syncing:
https://discussions.apple.com/docs/DOC-2551
I would enquire in the iOS forums to find out if there is a way without iCloud now to sync.

Adding custom message on the login page

I have done the following to try and get a custom message to display on the oracle login page:
1:
In the System Administrator Responsibility, went into the System Profile Options and searched for "Local Login Mask" The default value was 32, I set it to 96. This was done because 64 is the number to display a "Corporate Policy Message" on the login page (32+64 = 96).
2:
Switched over to the Application Developer responsibility, and went to Application->Messages. Here I did a search for "FND_SSO_SARBANES_OXLEY_TEXT". A result came back with current message text: "Corporate Policy Message". I changed this to a test message and hit save.
3
Still in Application Developer responsibility, I went to Other->Requests->Run and chose "Generate Messages", for parameters I chose:
Language: US
Application: Application Object Library
Mode: DB_TO_RUNTIME
while leaving the others blank. I submitted this request and it completed normal.
4
I logged out of applications, closed my browser and cleared my cache. I went to login into the apps and at the login page... it does display "Corporate Policy Message" but it never updated it to my custom one.
Question: Do I need to restart the HTTP server or something to see the updated results? I am confused why it will display "Corporate Policy Message" but the value for FND_SSO_SARBANES_OXLEY_TEXT is clearly changed. Even when you go back into it and look.
The Generate Messages conc prog is a spawned process so I cant find out what its doing.
Any help would be loved!
OH PS
I know I started a previous thread on a similar topic, but the method has changed completely and I think it merits its own thread. My apologies if it shouldn't have been.

Hi;
What is your EBS and OS?Please check below thread
password-Lock User when enter password in wrong 3 times
Re: Lock User when enter password in wrong 3 times
Regard
Helios

ADF application hangs after $$added root$$ message in the logs

Similar Messages

Maybe you are looking for