ADF: auto complete in tutorial does not work

Hi all,
I'm studying ADF tutorials. Developing Rich Web Applications with Oracle ADF tutorial has a sample of Auto-complete property. I followed the tutorial from the first step but cannot go further because At Part 3, Step 3 it is not possible to drag an Autocomplete Behaviour onto Combobox. Futhermore in the screenshots, it seems possible to type into Combobox which i never see such an example before.
This is the link of the Step that i'm talking about:
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_3.html
Thanks in advance,

I finally found a way to correct it. When you drag and drop the whole view, JobID is type of Combo Box but it should be Input List of Values (Combo Box). To solve this you need to only delete that combo box (not the whole structure) and drag and drop the Job ID again. This time select List Of Values so it becomes a combo box with editable area. This part is not mentioned in the tutorial makes the confusion.
Edit: I just see your edit, the forum link points out the same problem. This is the workaround. Unfortunately one of the basic tutorials of Oracle ADF is confusing.
Edited by: elmariachi on Jan 4, 2013 12:22 PM

Similar Messages

Passwords, auto-fill in safari does not work it is enabled in settings, what can do

passwords, auto-fill in safari does not work it is enabled in settings, what can do

Private Browsing Off.
Private Browsing On.

JDeveloper Tutorial does not work

Tutorial: "Developing a WEB Application Using the EJB Technology Scope"
does not work I get to step 3 - item 11 which is running the browseDepartments jsp. I get a :
500 Internal Server Error
java.lang.NoSuchMethodError: int java.lang.StringBuffer.indexOf(java.lang.String).. etc.
I have started over several time just to make sure I am following the tutorial correctly. I still get the following error. Is there an errata document on this tutorial?
Thank for any help,
Bob

500 Internal Server Error
java.lang.NoSuchMethodError: int java.lang.StringBuffer.indexOf(java.lang.String)
     java.lang.Object oracle.adf.model.binding.DCUtil.findContextObject(oracle.adf.model.BindingContext, java.lang.String)
          DCUtil.java:294
     oracle.adf.model.binding.DCBindingContainer oracle.adf.model.binding.DCUtil.findBindingContainer(oracle.adf.model.BindingContext, java.lang.String)
          DCUtil.java:537
     void oracle.adf.controller.lifecycle.LifecycleContext.initialize(oracle.adf.controller.lifecycle.Lifecycle, java.lang.String, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          LifecycleContext.java:121
     void oracle.adf.controller.lifecycle.LifecycleContext.initialize(oracle.adf.controller.lifecycle.Lifecycle, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          LifecycleContext.java:77
     void oracle.adf.controller.struts.actions.DataActionContext.initialize(oracle.adf.controller.lifecycle.Lifecycle, org.apache.struts.action.ActionMapping, org.apache.struts.action.ActionForm, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          DataActionContext.java:51
     org.apache.struts.action.ActionForward oracle.adf.controller.struts.actions.DataAction.execute(org.apache.struts.action.ActionMapping, org.apache.struts.action.ActionForm, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          DataAction.java:154
     org.apache.struts.action.ActionForward org.apache.struts.action.RequestProcessor.processActionPerform(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, org.apache.struts.action.Action, org.apache.struts.action.ActionForm, org.apache.struts.action.ActionMapping)
          RequestProcessor.java:484
     void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          RequestProcessor.java:274
     void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          ActionServlet.java:1482
     void org.apache.struts.action.ActionServlet.doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          ActionServlet.java:525
     void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
          HttpServlet.java:760
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          HttpServlet.java:853
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          ResourceFilterChain.java:65
     void oracle.security.jazn.oc4j.JAZNFilter.doFilter(javax.servlet.ServletRequest, javax.servlet.ServletResponse, javax.servlet.FilterChain)
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          EvermindFilterChain.java:16
     void oracle.adf.model.servlet.ADFBindingFilter.doFilter(javax.servlet.ServletRequest, javax.servlet.ServletResponse, javax.servlet.FilterChain)
          ADFBindingFilter.java:228
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
          ServletRequestDispatcher.java:600
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
          ServletRequestDispatcher.java:317
     boolean com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.ApplicationServerThread, com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindHttpServletRequest, com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
          HttpRequestHandler.java:790
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(java.lang.Thread)
          HttpRequestHandler.java:270
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run()
          HttpRequestHandler.java:112
     void com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run()
          ReleasableResourcePooledExecutor.java:192
     void java.lang.Thread.run()
          Thread.java:484
There is no code lines that are indetified as error.
Thanks,
Bob

Auto-Detect Screen Resolution Does Not Work Across Multiple Monitors With Different Resolutions

Hi,
The Acrobat Pro DC (15.007.20033.2203) auto-detect screen resolution feature does not work with multiple monitors at different resolutions. Acrobat looks fine on my hidpi primary laptop display (Razr 14" 2014) but is completely unusable if I drag or extend the application to a standard HD resolution secondary monitor. Dragging Acrobat from my primary desktop display to the secondary display causes the UI elements to become 2x as large as they should be and makes Acrobat unusable.
Is there a way to make Acrobat auto-detect the display that it is currently on?
Thanks!
-Donald

To prevent it from happing again, you can
1. go to the Mouse preference and turn off the scroll zoom feature.
2. go to the Universal Access preference and disable the zoom features.

My auto-scroll 3rd button does not work in FireFox 3.6. It worked in previous FF versions.

I have updated FireFox. My auto-scroll 3rd button now does not work in this version, 3.6 I have updated my mouse and checked the TOOLS "Use auto-scroll"... still it does not work.
I need my equipment to work. PLEASE FIX

I hate to sound like a broken record, DONE THAT ALREADY. _ _ _
I've ALSO learned to reboot after an uninstall then manually delete any residue in said uninstalled program. I've also gone as far as REGISTER searching for program residue and deleting that WITH reboot of coarse to be sure nothing has gone wrong. _ _ _ NEXT suggestion? I suggest FireFox fix there software. _ _ _ BY-THE-WAY,... I have also gone through my mouses buttton choices for my #5 button. Everything works but the "Auto-Scroll". One tab down/up/right/left works, one page down/up/left/right works. _ _ _ I used recently tried and successfully used the Auto-Scroll in Netscape, Opera, My Browser, Ace Browser, Chrome, and 2 others that escape my memory. _ _ _ PLEASE READ and understand this. >>> It's FireFox's software that is stopping this, not my mouse or PC.

ADF Tabe's Pagination link does not work when embedded in iframe

Hi experts,
When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
<iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
Any idea on it?
Thank you in advance.
Regards,
Tony

Hi,
if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
Frank

IPhone 4s screen is completely black and does not work at all; has not been dropped. Any help?

I opened up youTube using a shortcut from the Cocoppa app last night, and the screen froze, my home button would not work, so I locked it. The phone was charging at the time and nowhere near dead. After I did so, I pressed the lock and the home button [ not at the same time ] and the screen would not light up at all, it remained completely black. So, I unplugged it and plugged it back into the charger and it made the little sound it does when you do so, that told me it was not dead, and had not turned off. I held the lock button down to turn it off and swiped where the "slide to shut down" bar would normally be if my screen actually worked. It did nothing. My phone screen does not work at all now, even though it makes sounds such as Siri's little pinging noise when you hold down the home button. I am thoroughly confused and urgently need help to solve this problem.

Hello there, stevo3stevenz.
The following Knowledge Base article provides some great steps for troubleshooting your iPhone not powering on:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to get Revel on other devices with app to update when I have auto update and it does not work

How do I get Revel with auto update to update on my other devices with the Revel app when the update does not work?

In elements organizer, are you adding the photos to the mobile album?
Could you try the troubleshooting steps shared at: http://helpx.adobe.com/elements-organizer/kb/troubleshoot-revel-relate d-issues.html

Request Scope for portlets? Sharing data tutorial does not work for portlet

I created 2 identical applications, one that was a regular JSF web app, and one a JSR168 portlet. By following the "Sharing Data Between Two Pages" tutorial, I can get this technique to work without a problem in the web app, but the portlet (deployed locally using the pluto server) does not work. What is the difference between a regular app and a portlet app?
This shows that portlets apparently handle scope much differently than other applications, so any information relating to this would be helpful to pass along.

Portlet Life Cycle Differences
A portlet page is the same as a web application page in the Creator 2 application
model with differences only in the page life cycle. To best understand the life
cycle differences, you must first understand how a portal interacts with a portlet.
This interaction between portals and portlets is defined by the JSR-168 Portlet
specification. Typically a portal display in the web browser shows multiple
portlets. That is, when the portal page is displayed, there are actually multiple
portlets displaying or rendering their content. The job of the portal is to manage
how these portlets are displayed. Internally, the portal is responsible for telling
each portlet two things:
1. When to display itself
2. If there has been an action, such as a button press, performed inside that
portlet.
When a portal wants portlets to display their contents, the portal sends a render
request to each portlet showing in the portal. If one of the portlets showing in the
portal has a button tied to an action request, when that button is pushed, the
portal fires an action request for that portlet. In addition, the portal generates a
render request for the portlet and all other portlets on the page. You should note
that the portal implementation fires both action and render requests for each
action method on a portlet showing in the portal. The implication of this
interaction means the portlet page being rendered can not make assumptions
about the state of the values to be shown. Unlike a normal web application page,
a portlet page can't assume that the page being rendered in the Render Response
phase is the same page that was built in Restore View. If a portlet wants to
maintain state across repeated render requests, the portlet must use the session
bean to store stateful information.
The main point to remember is a portlet page must always be prepared to render
it's values from scratch or session data. This implies you should never bind
portlet page UI components to page bean properties or request bean properties.
Also, you should never rely on page bean instance variables that might be set
during an action event.
Hope this helps.

I have 2 computers. Computer #1 'populates' username and password as auto complete. #2 does not. How do I

I like the 'auto-complete feature to fill in both the 'username and password' how do I accomplish this?
Marty

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*http://kb.mozillazine.org/signon.autofillForms

The flash on my camera is not working. Even when I switch from auto to on it does not work.

I have witches from auto to on and the flash for my camera still doesn't work. I have not dropped it and the flash was working just 2 days ago.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Example in Data Modeler Tutorial does not work as described

Using Oracle Data Developer 4, I cannot get the example on https://docs.oracle.com/cd/E57998_01/doc.41/e57984/tut_data_modeling.htm#DMDUG36173 to work as described. The Foreign Key fields in the logical model are not generated. They are only generated in the relational model when I develop the logical model. However, the names follow the template {table}_{table}_ID, which will cause problems for long table names. Now I have two questions:
1. How can get the foreign key fields to be generated in the logical model, as descibed in the tutorial?
2. Where can I see the default naming rules for generated fields used by the program and where can I change them? - I found a description how this works in Version 3, but these options do not exist anymore in Version 4.

2. Where can I see the default naming rules for generated fields used by the program and where can I change them? - I found a description how this works in Version 3, but these options do not exist anymore in Version 4.
In version 4 the template definitions are defined in the properties for the Design.
Right-click on the Browser entry for your Design and select Properties.
In the tree in the left panel of the Design Properties dialog, expand Settings, then expand Naming Standard and select Templates to display the Template definitions.
David

Sending Email Tutorial Does Not Work

Has anyone been able to successfully complete the "Sending Email From a Web Application" tutorial?
I am able to Build and Deploy, but receive a "Class Not Found" error on deployment.
Win2K sp3, 1Gig Ram 3 Gigs Free Disk
I am using my own email account for both To: and From: on our Exchange email server.
Thanks in advance.
Clay

Make sure everything you need is in your classpath.
Hope this helps,
- D.t.O

Trying to install Flash 11.5 on Mac OS X 10.6.8. Install completes but Flash does not work - any help?

Hi, I was told I didn't have Flash 7 when trying to see something online (which I am sure was incorrent to begin with) so I followed the provided link to download Flash version 11.5. The download completed without problems but Flash doesn't seem to work at all. I have uninstalled, reinstalled and restarted. I don't know what to try next, any help would be much appreciated!

Start here;
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
Also, never, never follow links for flash, codecs or plug-ins of any kind from websites that throw up these warnings - there's a high chance of the link being to a malware site.
Always go directly to the vendor.

Complete my albums does not work

I downloaded 9 of 41 tracks from a cd (coca cola "free iTunes song" action). I now would like to buy the rest of the cd but that option is not available in the iTunes store.
Does anyone know a mail address where I can ask Apple for help on this one?
Kind Regards,
Erik Moust
Netherlands

www.apple.com/feedback/itunesapp.html

ADF: auto complete in tutorial does not work

Similar Messages

Maybe you are looking for