Multiple Approvers for Firefighter Ids

Hi All,
we have a scenario at one of our client that for Firefighter there should be multiple Firefigthers.
ex : FFID1
Approvers = A and B
Approver A is the Team Lead.
Approver B is the Track Lead/ Manager.
So when requester requests the FFID1 it should first go to the Approver A(Team Lead) and once he approves then it should go to the Approver B(Manager).
How can we configure this in GRC 10. Please explain in detail and provide config steps if possible.
Thanks in advance.
Ansari.M

Hi Kaushal,
Thanks for the info.
Well can you please let me know the step by step configuration for this scenario.
Like once the Team Lead approve then the request should go to the second level of approval to the Manager.
As you explained it was clear that it can be done, I am working on your steps. But can you also refer to any document or forward me the steps.
Thanks
Ansari.M

Similar Messages

  • Multiple Approvers for Role

    Hi,
    Is it possible to have 2 approvers (primary and secondary/back-up) for a role but only one them need to approve? Both should get the email notification but only one of them should approve. Escalation to alternate approver is not what I am looking for.
    When the roles are imported into GRC, do I need to a two entries for each role since I need have 2 approvers for the role? or is Delegation a better option?
    If Delegation is used, then do I have to setup both as role owners? or can delegated user approve with the need to setup as role owner?
    Thanks,
    Jay

    Hi Jay
    You can have 2 approvers for the same roles where either of the approvers can approve the request. You need to specify 2 entries for the same role in the import file. Both approvers will receive the email notification
    A delegate dosent have to be specified as an access control role owner.
    Thanks
    Anthony

  • Approval workflow with multiple approvers in sharepoint

    Hi All,
    I have created a sequential workflow using visual studio 2012 for sharepoint 2013.
    I have multiple approvers for approving a document. I am able to create individual tasks for each approver by code
    my problem here is tasks should be created based upon the hierarchy, i.e. the second task will be created only when first task is approved.
    All my approvers are dynamic so I did this development in visual studio. Please give me some idea how to proceed for my problem.
    Sarath Sannadi Sharepoint Dev at Saksoft

    Hi sarath,
    Thanks for the sharing.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Need to setup monitoring aon multiple ports for IDS

    I have a cisco 3845. I need to need to setup monitoring aon multiple ports for IDS on 2 ports. How do I do this.
    Also,
    Is there a way to make ports on the switch portion act like hubs.
    Thanks

    I assume that you are referring to the Ethernet Switch Module in the 3845. If so it should support SPAN. Here is a SPAN configurations guide:
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122z/122zj15/fz1636nm.htm#1820129

  • Multiple Approvers based on roles selected for Target Application

    I have specific requirement to implement in Oracle Identity Manager.
    when the user request for a resource then he will be able to select
    multiple roles.For each set of roles the approver is different.
    if the user selects any one role of a set then it is mandatory that
    before going to next level of approval the approver for that set has to approve/reject
    the request.
    Ex.- If one application say A has set of roles X,Y,Z.
    each set contains three roles-
    X contains - 1,2,3 has approver P
    Y contains - 4,5,6 has approver Q
    Z contains - 7,8,9 has approver R
    If the user selects roles 1,2,4,9 then the request should go to P,Q,R for the approval.
    If P,R approves the request but Q rejects the request then only 1,2,9 has to be assigned to user,
    when P,Q,R tasks has been completed then only request should go to next level for approval.
    Please suggest what we can do best.
    Thanks,

    Just read the data i.e. group selected on basis of that you can assign it corresponding Approver.

  • I am using my Apple ID on multiple devices for other people. How can I make icloud work only for my devices?

    I am using my Apple ID on multiple devices for other people in my family and now I am getting a new iphone and want to take only the information on my old iphone to the new one without the information on the other devices using the same account. Is there a way to do that?
    Also, for the future can I use multiple addresses and apple IDs for the same credit card information?
    Thanks in advance,
    Marian

    Ok, so you want to remove data (contacts, bookmarks, calendar etc) from other users from your iCloud/Apple ID?
    If you want to use your ID for your family because it is the account everybody uses to buy stuff then you only need to ensure that your apple ID is set up in the store (settings-store) and then the users of each device and put their own apple ID in icloud/message/facetime/etc.
    To set up your device, in my opinion, it is best to back up to itunes, and then plug your new device into itunes and "set up as ..." and select the backup from your device.  This will import all your data/settings and your new device will be set up just like your old one.
    I am not certain about using the same payment method for more than one account. 

  • Single step workflow with multiple approvers (without using a group)

    Hi,
    is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
    i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
    DO let me know if it is possible or if any of you have done that.
    thanks in advance.
    regards,
    rubio

    Hi Rubio,
    I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
    Regards,
    Vikram

  • Firefighter IDs Not Populating in GRC 10

    We're having an issue getting the firefighter IDs to populate in GRC 10.
    We have:
    1) Configured the integration scenario 'SUPMG' in GRC system (SPRO - Governance, Risk and Compliance - Common Component Settings - Integration Framework - Maintain Connection Settings)
    2) Added 'SAP' connection type, 'CL_GRAC_AD_SUPER_USER_RFC' class/interface under 'Scenario-Connection Type Link' for integration scenario 'SUPMG'
    2) Configured the 'Target Connectors' under the 'SUPMG' scenario
    3) Verified that the superuser firefighter role 'SAP_GRAC_SPM_FFID' is configured under parameter 4010 (SPRO - Governance, Risk and Compliance - Access Control - Maintain Configuration Settings)
    4) Verifed that the superuser firefighter role exists in the target system and that full authorizations have been added and generated for 'S_RFC' authorization object
    5) Created a firefighter ID in the target system, setting the user type = 'Service' and assigning the superuser firefighter role to the user ID
    6) Executed the 'GRAC_AUTH_SYNC', 'GRAC_REP_OBJ_SYNC', 'GRAC_ROLEREP_USER_SYNC' and 'GRAC_ROLEREP_ROLE_SYNC' for target system
    I've read that the 'SAP_GRAC_SPM_FFID' (or custom variation) role needs to exist in both the GRC and target system.  It currently exists in the target system but not in the GRC system.  Is this step necessary?
    Other than that, we can't figure out why the firefighter IDs would not be populating in GRC?!?
    Any insight would be appreciated.  Thanks!

    Hi Parag,
    Please check this blog post which gives you clear idea about all the details required for your EAM configuration.
    http://scn.sap.com/community/grc/blog/2014/01/16/de-centralized-eam-grc-100
    Regards,
    Madhu.

  • Work item in waiting status incase of multiple approvers

    Hi Experts,
    We have a scenrio where in the work item needs to be sent to multiple approvers.
    We have multi line container element which contains all the approvers. We have assined this container element using the expression option for the agent .
    we have made the task as general task and we do not have any requested start maintained for this work item.
    However we are facing a problem. Work item is always in waiting status. What might be the issue? In our case when i check the work flow log, for these work items there are three approvers, however SBWP inbox is appearing only for one approver and remaining two approvers do not have any Icon against their name.
    I have checked the approvers ID's and all of them are active in the system.
    Can you please help me to resolve this issue?
    Regards,
    Madhu

    Hello,
    I would look at the workitem in SWIA, proceed as if you were going to change the container elements (ie click on the workitem number, Edit > Change) and see what options are available to you.
    "Resubmit: You can have a work item resubmitted to you for processing at a later date. To do this, choose Resubmit and then enter the date on which you want to receive the work item."
    Let us know what you find.
    Edited to add: I tried it myself, a "End resubmission" button appears when you click on the Waiting step in the workflow log.
    regards
    Rick Bakker
    hanabi technology

  • Set multiple passwords for single PDF

    Hi All,
    Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
    Thanks
    Augustine

    Thank you.
    Do you mean different IDs can be used for a single PDF and can make the PDF protected.
    Regards
    Augustine

  • Dynamic Approver Group Will Not Return Multiple Approvers

    We have created a dynamic approval group to return person_ids (stored in a lookup) for some of HR operations people. This will be called by an FYI rule.
    The problem is that AME seems to fail if mulitple person_ids are returned by the dynamic query.
    Is it even possible for a dynamic approval group to return multiple person_ids? If so what could I be missing?
    P.S. I realize I can use a static approver group to meet the same requirement but the reason we choose a lookup was it made it easier for us to maintain. We can revert to a static group if there is no other solution.

    We overcame the problem by splitting out each person_id into a different row in the lookup table.
    Multiple approvers are now being returned.

  • Send a request to multiple approvers in a stage?

    Dear forum,
    I was in the impression that Distribution Lists could be used generally for approval, but it seems to work only for role approvers.
    Is there a way to send a request to multiple approvers in a stage?
    Kind Regars,
    Vit Vesely

    Hello
    If you want the request be sent to several approvers you can set into the Custom Approver Determinator all approvers you want to check the request.
    However the CAD that you created from before must be linked to the stage. In this stage you can configure: "Anyone approver" it is enough to pass throug the next stage that only one of this several approvers has approved. And I guess "Everyone approver" is a necessary condition that every approver from the list has approved the request.
    Hope to be useful.
    Margarita.

  • Multiple approvers and one approver execute the workitem without complete

    Hi all,
    In case of multiple approvers, if approver-A executed the workitem but cancel it without complete.  The workitem will stay only in approver-A SAP inbox and disappear from other approvers' inboxes.  Is this a standard way?
    For whatever reason, if approver-A cannot execute the workitem.  What can be done by workflow administrator to make the workitem appear again in other approver's inboxes?
    Thanks and Regards,
    Donald

    Hi Donald,
    Yes this is the standard behavior of workflow.
    If you send the work item's to the multiple approver's and one approver open the work item it will disappear from all other's inbox.
    if the approver A open's the work item, then it will disappear from other's inbox. You can use the fm SAP_WAPI_FORWARD_WORKITEM to forward the work item's to the other user.
    Thanks,
    Viji.

  • Can you set up multiple profiles for I pad

    Can you set up multiple profiles for I pad

    Not sure what you want to do.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • Registering multiple devices for testing app

    i am trying to register multiple devices for testing my app. I have downloaded the sample file and pasted my devices names and ids there but it refuses o upload them saying it is not the right format! Any hints?

    Suggest you repost in the Developer forum at https://discussions.apple.com/community/developer_forums
     Cheers, Tom

Maybe you are looking for