[ADF] Focus does not get set on a second level dialog/popup

Hi,
While working on a related bug, I've discovered that for every second level dialog/popup(a popup that is invoked from another popup), the focus does not get set to the second level dialog if the first component in that popup is an inputText, unless a user explicitly clicks on it. By focus I mean that on pressing tab, the fields on the previous popup still get selected/highlighted.
This does not happen if the first UI Component is any other; everything else kept the same. I suspect this is an ADF bug; does anyone know of a workaround?
Thanks,
Ravikiran Sastry
Edited by: 911228 on Jan 30, 2012 11:59 PM

Hello,
we are having the same issue using JDeveloper 11.1.1.4 and Internet Explorer 8.
The code is really simple: just a regular popup with an inputListOfValues component inside. Open the popup, open the inputListOfValue's "Search and Select" popup and if you press the Esc key, the first one will be closed, while the "Search and select" popup will remain there.
Jordi

Similar Messages

[ADF] Focus not getting set on second level dialog/popup

Hi,
While working on a related bug, I've discovered that for every second level dialog/popup(a popup that is invoked from another popup), the focus does not get set to the second level dialog if the first component in that popup is an inputText, unless a user explicitly clicks on it. By focus I mean that on pressing tab, the fields on the previous popup still get selected/highlighted.
This does not happen if the first UI Component is any other; everything else kept the same. I suspect this is an ADF bug; does anyone know of a workaround?
Thanks,
Ravikiran Sastry
Edited by: 911228 on Jan 30, 2012 11:59 PM

Hello,
we are having the same issue using JDeveloper 11.1.1.4 and Internet Explorer 8.
The code is really simple: just a regular popup with an inputListOfValues component inside. Open the popup, open the inputListOfValue's "Search and Select" popup and if you press the Esc key, the first one will be closed, while the "Search and select" popup will remain there.
Jordi

Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Content Organizer bug - PDF files does not get routed correctly if autodeclaration is on and library level default values are set

It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
1. Column level default value set on a record library with auto declaration of records turned on. The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again.
2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
the target library has blanked out metadata.
Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree with

Hi Lisa,
Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
at a library level. I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this. Also note that the issue is not that the file does not reach the destination library. The issue is the
document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed.

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Audigy 4 Pro - I/O Hub does not get any po

Hello all,
I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
This somewhat sumarizes what I tried so far:
. Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
2. Also removed all entries of the old soundcard from Device Manager
3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
7. Connected the larger AD_Link to the card, then to the hub
8. Connected the smaller AD_Link to the card, then to the hub
9. Finally connected the power convertor cable to a free systems power unit
0. Double-checked the entire hardware setup a few times and power the PC back on
. Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
4. Rebooted PC after prompting to do so.
5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
9. Uninstalled and reinstalled the drivers and applications: Same problem
20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
2. Set my BIOS to factory defaults: Same problem
22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
Thanks in advance!
PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
Message Edited by HilTek on 07-05-2005 :04 PM

Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
Thanks
John
AMD Athlon(tm) 64 FX-57 Processor
A8N-SLI Premium
NVIDIA GeForce 7800 GTX
GB RAM
WIN Pro x64

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

Hostname verifier does not get invoked

Hi All,
I am new to weblogic and currently facing an issue with SSL. I checked this forum but none of the solutions really worked for me, so seeking advice starting a new thread. Kindly help.
Problem 1
I have a REST webservice running in one weblogic server and another weblogic server contains a client which is based on the code from the following link -
http://wiki.open-esb.java.net/attach/RestBCEchoSSL/SslClient.java
One way handshaking is enabled in both the weblogic and the KeyStore and Truststore are read from configurable directory in the client java code. I specify a directory which resides outside weblogic home.
Even though there is an HostnameVerifier implemented in the code to return true always, it does not get invoked and I get a certificate exception as below -
<Warning> <Security> <BEA-090542> <Certificate chain received from xx.yy.zz.rrr - xx.yy.zz.rrr was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
But when I run the java client from Eclipse I am able to invoke the webservice methods using HTTPs.
So is not it possible to add a default hostname verifier as in the java code when the application is deployed in weblogic?
Problem 2
I another attempt to solve the above issue I turned off the hostname verification from weblogic admin console in the client weblogic side. In the console for the server Configuration > SSL->Hostname Verification field is set to "None". But that did not help.
Then I added the '-Dweblogic.security.SSL.ignoreHostnameVerification=true' flag into the <domain>/bin/startWebLogic.sh file and restarted the weblogic. No luck again.
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy -Dweblogic.security.SSL.ignoreHostnameVerification=true ${PROXY_SETTINGS} ${SERVER_CLASS}
I tried recreating the certificate using the' hostname' instead of the ip address ( also added an entry into the /etc/hosts file putting the ip and hostname so that I can do ping <hostname> from the client and get response returned from the server side). Again no luck :(. I keep getting the same handshake failure as mentioned above.
The weblogic version is 10.x.
Thanks,
Amrit

I did some more research for the issue mentioned which I yet to get rid of.
1) I wrote a REST web service which makes a call to another REST service deployed on another weblogic using HTTPs (same code as mentioned above is used). I delpoyed the war and made a http call to the first webservice, the other REST service was invoked successfully using HTTPs. So this confirmed that there is no problem with the certificates or keystore or hostname verifictaion.
2) My actual application still throws the handshake exception as below -
<Warning> <Security> <BEA-090542> <Certificate chain received from xx.yy.zz.rrr - xx.yy.zz.rrr was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
So I think the problem is something else but weblogic is priniting the exception message wrong.
The process hierarchy ( in UNIX ) is as shown below -
bea 31914 31913 0 14:29 ? 00:00:00 /bin/sh <DOMAIN HOME>//bin/startWebLogic.sh
bea 31989 31914 0 14:29 ? 00:01:25 /opt/bea/jdk160_24/bin/java <The weblogic start server process> started by startWebLogic.sh
bea 32107 31989 0 14:29 ? 00:00:09 /opt/bea/jdk160_24/bin/java <One of custom process>
bea 2038 32107 0 18:38 ? 00:00:15 /opt/bea/jdk160_24/bin/java <Another custom process which contains my java classes containing the REST client>
The problem is there in both Weblogic 11 and 10.3 version.
I will be grateful if someone gives any clue about the problem.

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

SA520W does not get IP on optional WAN

We are using a SA520W as our primary router and have a fiber connection attached to the default WAN interface. We would like to improve our uptime using a secondary internet connection on the optional WAN interface.
We have bought a dovado tiny 4g router for this other connection. It acts as a dhcp server but the Cisco router does not get an IP from the dovado router. The router works as expected when connected to a normal computer. But somehow the cisco router doesnt get an IP.
I have also tried to set a static IP for the Cisco router but that didn't help either. The dovado router is setup do deliver ip in the range 192.168.0.2-254
Link is up but WAN state is Down. Any ideas?

Hello Christian,
What is the port configuration settings, set to 10/100/1000 Half or Full. If Auto try manually changing. Also you can try to clone the mac address, or set the mdi/mdix settings on the G4 router if possible.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

[ADF] Focus does not get set on a second level dialog/popup

Similar Messages

Maybe you are looking for