Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

Similar Messages

  • Quantity fields not getting displayed in the second total row

    Hi,
    As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
    The second total row will have different values based on a formula.
    Please help me out in resolving the issue.
    Thanks,
    Abhishek

    You can provide first row as the SUBTOTAL and next row as the TOTAL.
    Get one extra column on which you can do the SUBTOTAL.
    Regards,
    Naimesh Patel

  • Fields not getting updated in the database through BAPI enhancement

    Hi Experts,
    I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
    I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
    But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
    Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
    Regards,
    Sangeeta.

    Solved on own.

  • [ADF] Focus does not get set on a second level dialog/popup

    Hi,
    While working on a related bug, I've discovered that for every second level dialog/popup(a popup that is invoked from another popup), the focus does not get set to the second level dialog if the first component in that popup is an inputText, unless a user explicitly clicks on it. By focus I mean that on pressing tab, the fields on the previous popup still get selected/highlighted.
    This does not happen if the first UI Component is any other; everything else kept the same. I suspect this is an ADF bug; does anyone know of a workaround?
    Thanks,
    Ravikiran Sastry
    Edited by: 911228 on Jan 30, 2012 11:59 PM

    Hello,
    we are having the same issue using JDeveloper 11.1.1.4 and Internet Explorer 8.
    The code is really simple: just a regular popup with an inputListOfValues component inside. Open the popup, open the inputListOfValue's "Search and Select" popup and if you press the Esc key, the first one will be closed, while the "Search and select" popup will remain there.
    Jordi

  • TDS amount not getting updated in the table under the field QBSHB

    Dear Friends,
    The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB. 
    Kindly let me know the reason for the same and guide me to correct it
    TIA.
    Regards,
    Vincent

    HI Vincent,
    Bseg-QBSHB field is relavent for classic WT.
    I hope you are using the EWT.
    Hence if you post a document through MIRO it will not update
    (but if you post document FB60 it will update but wrongly).
    Reason is Miro document is posted through interface.
    Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
    refer only with_item table.
    Please refer the below replay from SAP
       Please refer the below note .363309
    Please review attached note 363309 for detailed explanation
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax' button."
    (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
    Extended withholding tax and not suppose to use in report FBL1N.
    It basically does not make any sense to use the withholding tax fields
    of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
    activated extended withholding tax.
    regards
    Madhu M
    Edited by: M Madhu on Jan 31, 2011 1:19 PM

  • Overhead is not getting updated in the production order

    Hi all,
    I am running actual overhead calculation with KGI2.
    But the overheads are not getting updated in the order.
    Order contains relevant overhead key also.
    What could be the possible causes?
    SmanS

    Arun/ Suleman,
    Thank you for your reply.
    I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
    Request you to elaborate it further & explain me how to maintain the same.
    Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
    Mean while I had maintained the required values in costing sheet in KZS2.
    Maintained the % against material overhead rate as well as manufacturing overhead rate.
    Maintained the credit values for the overhead rate.
    Maintained the calculation base values also.
    Now while overhead calculation with KGI2, I am getting two errors as follows,
    1. S:K5:162 E02 20090831
    2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
    I can not figure out the reason.
    SmanS
    Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

  • Quantity field not getting update in PCA document for Goods Receipt

    We have the Purchase Account activated for our company code.
    For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
    But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
    Please advice whether I am missing something.
    Regards
    B.Mohanty

    Hi Aravind,
    Check SAP notes  1063198 and 1117587.
    FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
    relevant in this case. This is clearly explained in the note 1063198.
    The quantity posts through to FI on the 'goods receipt' items, but not on the
    'invoice receipt' items.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    But in the old 'Profit Center Accounting' and the old' Special Ledger'
    the field has been important.
    As the same logic of these areas to 'store' the Quantity is also used
    in the NewG/L the field get only filled in the line, where it make
    'sense' from our point of view, because only in the 'goods receipt'
    lines a 'real' Quantity is posted to the system.
    So as before in the PCA and SL, now also in the NewG/L the Quantity is
    filled in the correct and important lines and postings.
    In the BSEG ('old document segment table') the field is filled 'just'
    as it is send to the FI, but this is not completely correct from the
    business point of view.
    This can also lead to issues with the reporting and summation to this
    field. So with creating the new logic in the NewG/L the 'correct'
    standard of the 'writing' for the Quantity has also been taken over.
    So in the end, the update and display is correct according  SAP standard behavior.
    Actually,Quantities within G/L are never reliable,
    because the purpose of FI is a view on the data according to amount
    but not according to quantity.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    I hope I could be of assistance.
    Regards,
    Fernando

  • The currency is not getting updated in the table VBAP

    Hi ,
    The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
    Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
    Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
    The net Value has data in it .
    The system is ECC 5.0
    Regards,
    Senthil

    Dear Senthil,
    Please apply the following notes (if they apply to your support pack level) and retest:
    1460621 VBAP-WAERK is deleted after the sold-to party is changed
    1426441 VBAP-WAERK deleted for subitems
    1493998 VBAP-WAERK deleted for subitems
    This should resolve the issue. I hope this helps.
    Best regards,
    Ian Kehoe

  • Batch Classification data not getting updated during the GR of the PO

    Dear Gurus,
    While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N  reads the information directly from the
    reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
    Sumit Mohan

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Consumption values not getting updated on the material mastere

    HI Gurus,
    can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
    Thanks
    Anushga

    Dear ,
    Use tcode - OMJJ and then do the following setting -
    for movement - 261,262, 201 and 202
    Statistically relev. - 2
    Consumption posting - R
    for movement - 701 and 702
    Statistically relev. - 2
    Abhinay
    Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

  • Deliver completed indicator is not getting updated in the PO item Overview

    Hi Gurus,
    We have the PO with quantity of 10 and it has been GR/IR, but the  Delivery completed indicator is not getting updated (Checked).
    The deliver completed indicator is selected in the config of t-code OMCD.
    Also there is no tolerance limit is maintained.
    Could you please suggest us why the indicator is not getting updating.
    Thanks & Regards,
    Sada

    Hi check follwoing
    1. Set Delivery complete indicator at plant leve
    spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
    2. Control field selection for MIGO to disable users from changing it.
    spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
    and chek this link
    ["Delivery Completed" Indicator
    Regards
    Kailas Ugale

  • Field not getting updated in BDC while running in background

    Hi Friends,
    I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
    Can anybody help me advicing why the field is not getting updated in background?
    Thanks,
    Bestin

    Hi ,
    Check the the log if you are using a session method and if call transaction then capture the messages for the same,
    Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
    Thanks & Regards
    Jyo

  • Custom fields not getting updated in Mass Maintenance-MM17

    Hi,
    I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17.  I have checked the notes 44410, 576160, 414020 and 116311.  I have done the following changes as per the sap notes.
    1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that  
        segment.
    2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
    3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
    4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
    5. Added the custom field in the table MASSFLDLST.
    6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the 
        sap notes.
    The custom field is not getting updated through mass maintenance.  Please let me know if i have missed anything?
    Thanks,
    Geeta

    I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

  • Cost Center field not active

    Dear Friends
    I have a situation where when I try to hire a person, the cost center field is not active.  I have checked in screen modification, but it is in standard setting only.  Even I tried to assign the particular position using relationship A 011.
    Please help
    Regards
    Santhosh.S

    Dear Biswajit
    The cost center field is uneditable.  My PA OM switch is already active.  My doubt is when I hire a person to that particular positions the cost center field in Organizational assignment is not editable.
    One more doubt I am having is where do we assign the cost center.
    To my understanding it should be done is Org Unit level or even can be maintained in position level using A011 and the same should be reflected when a person is hired to that particular org unit or person, but it is still not reflecting the cost center.
    Can the cost center be changed, if it can be changed, then how.
    Please advise me as to my understanding is correct or not.
    Please help.
    Regards
    Santhosh.S

  • REGUP Table Withholding tax field not getting updated

    hi friends,
                  from a specifc date with holdiing tax is not getting updated in REGUP-QBSHH field, so in payment advice its not getting displayed. can any one help me wat could be the problem for this
    thanks
    nagaraj

    hi amir,
            i dont have test case for that. till 28th of the last month the field has been updated and after that till now all the entries in that field is showing zero. but when we check in FB03. i can see the with holding tax amount. can u tell me how this table is getting updated
    thanks

Maybe you are looking for