ADF Struts on Login Box with User on DB

Dear All,
I read the respond on my last post about the login box and it was help me a lot.
Now, my problem are how to make a login box on ADF Struts technology which the username and password verification from user and privilage on oracle database?
Noone can connect to menu and the privilage from oracle database regulate the data that will be display.
I hope somebody will help me with the step by step configuration. I'm new in these technology...
Thanks a lot

this is probably a question for the JDEV forum.
Regards
Grant ROnald
Forms Product Management

Similar Messages

Login Box example and source code on adf struts and JSP

Dear all..
I want to make application using ADF struts and JSP using oracle 10g Jdeveloper.
The user should login into the login box and verify everyone who has right to enter the home.jsp.
Anybody could help me with the source code as well as the step by step explanation...
I'm looking forward the help...

http://www.oracle.com/technology/products/jdev/collateral/papers/10g/reviewer/viewlets/reviewer_struts_viewlet_swf.html

Multiple user login problem with ADF

Hi All,
I am using Jdev 11g. I have an ADF application which is running inside JDev enbedded WLS. I implemented "Authentication Only" security into the application and created a few users. If I try to login/logout/re-login with individual user, all of users work perfectly. However, when I have one user already logged in, I open another browser and try to login with another user (or the same user), I always get an "Error 403--Forbidden" error. Basically I have an application which can only work for one user at one time. Does anyone know how to fix this problem so that I can have multiple users logged in at the same time?
Thank you very much in advance,
John

Chris,
Thank you for your response.
I am using Firefox version 2.0.0.20. When I add the security component into my ADF application, I just take whatever it has by default without any customization. That includes default login.html and error.html. Here is my experience,
1) Execute my starting task flow activity inside the JDeveloper. This will invoke a new login page in my default browser Firefox.
2) Login the application with user "abc" and do something. Keep this session open.
3) Open another Firefox browser and enter login URL. and then Login the application with user "xyz" (or even "abc"). I got the error page.
To me, it should be basic web application behavior. I can do things like this in other J2EE application. This one doesn't make sense at all. I am not sure if this is the behavior I would see when I deploy it to a standalone WLS.
Any ideas?
Thanks,
John

Help with simple display and add in ADF/Struts app

I created a simple ADF/Struts application based on the HR schema. I have a department view object and entity object based on the Departments table. From the Struts page flow designer, I create a data page action (viewDepartments) that binded to a departments view object by dragging the departments view object as a "Read-Only" form from the palette with the navigation buttons --- this page will just display the departments. Next, I created another data page action (addDepartments) that allows a user to add a department. I did this by dragging the departments view object from the palette as an "Input Form" and then dragging the "Create" operation onto the data page action. Each data page action has its own JSP of course.
I'm noticing that every time when I go to to the "addDepartments.do" and then go to "viewDepartments.do", a blank record is added to the view object. Why is this? Also, I want the Submit button to do the "save and commit" in one step. How do I do that?
If it helps, I can email anybody the workspace file so that you can see this behavior.
Thanks.

Try following this step by step tutorial to see if it will make things better for you.
http://otn.oracle.com/obe/obe9051jdev/adftojsp/defaultendtoend.htm#t3

SSPI handshake failed with error code 0x8009030c and Login failed for user''

I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!

Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it under your ID. In that case, contact iTunes Support.

How do you login as different user with Leopard client

Hi All,
I have an OS X server running 10.4.10. I've never had this problem when connecting to it with Tiger clients.
With Leopard clients, I'm trying to login as administrator. There's no way to do it. I don't show any connected servers (or mounted shares) and when I choose "Connect to Server" it shows the Server Address IP dialog as usual, but once you click OK, it brings up the Shares dialog box with share only available to standard users.
In the old days, once I chose the IP for a server, it would give me the name and password dialog box and I'd put in the credentials for whoever and get the correct shares dialog. Now I can't get to the name and password dialog, and no shares are mounted.
I've tried holding down all kinds of key combinations, but if there's one that does it, I can't find it.
Please help.
BTW - another topic that doesn't even come close to showing up in Apple's kbase.
Thanks. Mike.

in the finder under the column view there are 2 buttons that show up when you select the server.. one is "share screen" and the other is "connect as", if you have guest enables on your server and you connect to it through the shared section in the finder you will connect as guest. By using the connect as button you will connect as a user.

Limiting user login time with logoutd

Hi, I wish to limit the time a user uses his session, and I found that the "logoutd" daemon can accomplish this, however, I could't manage to find the syntax rules for configuring it, it uses the next config file:
/etc/porttime
Any Ideas?
=======================================================
Edit: I found out how to use it in the man page:
man porttime
pretty simple
========================================================
Hum, I did what the man page said adding a line for the /etc/porttime with the config I wanted, however I can still login, heres my conf:
*:loise:Al1900-2100
I want that the loise user can only login from 7PM to 9PM everyday, and that the rest of the users can login at anytime. What should I do?
Last edited by LTSmash (2008-03-16 20:40:19)

Chris,
Thank you for your response.
I am using Firefox version 2.0.0.20. When I add the security component into my ADF application, I just take whatever it has by default without any customization. That includes default login.html and error.html. Here is my experience,
1) Execute my starting task flow activity inside the JDeveloper. This will invoke a new login page in my default browser Firefox.
2) Login the application with user "abc" and do something. Keep this session open.
3) Open another Firefox browser and enter login URL. and then Login the application with user "xyz" (or even "abc"). I got the error page.
To me, it should be basic web application behavior. I can do things like this in other J2EE application. This one doesn't make sense at all. I am not sure if this is the behavior I would see when I deploy it to a standalone WLS.
Any ideas?
Thanks,
John

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Can't get Struts validator to work with ADF 10.1.3.36.73 in Jdev 10.1.3.0.4

I am attempting to use the "How to Use the Struts Validator Plug-in with JDeveloper 10g" written by Duncan in a JDeveloper 10.1.3.0.4 application with standard model/ViewController projects. I am using JSP/Struts/ADF technologies.
I have performed the below:
Struts Config:
<form-bean name="surveyDataForm" type="oracle.adf.controller.v2.struts.forms.BindingContainerValidationForm" className="oracle.adf.controller.struts.forms.BindingContainerValidationFormConfig"/>
<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames" value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
</plug-in>
In the validation.xml:
<!DOCTYPE form-validation
PUBLIC "-//Apache Software Foundation//
DTD Commons Validator Rules
Configuration 1.0//EN"
"http://jakarta.apache.org/
commons/dtds/validator_1_0.dtd">
<form-validations>
<formset>
<form name="surveyDataForm">
<field property="EmpName" depends="required">
<arg0 key="survey.name"/>
</field>
<field property="DateOfService" depends="required">
<arg0 key="survey.service.date"/>
</field>
<field property="ReloContractor" depends="required">
<arg0 key="survey.relo.contract"/>
</field>
</form>
</formset>
</form-validations>
And in my JSP, I have:
<script type="text/javascript">
<html:javascript formName="surveyDataForm"/>
</script>
<html:form action="/survey.do" onsubmit="return validateSurveyDataForm(this)">
(The validation-rules.xml was copied from the JDev install jakarta-struts folder).
I can now see the Javascript showing up in my JSP page, but I don't have a method generated for validateSurveyDataForm or any form like this. I didn't think I had to create this. Also, even without the Javascript, the validator is not called because the JBO errors for required are still showing up. The only thing I have not done is included the modelReference in the Form Bean definition in the struts-config.xml. I'm not sure this will work, or even what to populate this with, as the UIModel.xml is replaced by PageDef.xml and DataBindings.cpx changes.
Anyone have any ideas?
Shay

Only have one network; wireless. On it's own, the MacBook can use wifi to surf the net and Apple TV can watch movie previews from Apple via wifi.
It did work about two months ago. I haven't used it since then for home sharing but have used the Apple TV on its own.
I read the Troubleshooting page on Apple Support. It involves turning various things on and off, which I did

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

How to login the remote desktop with user id and password using coded ui

we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem?
Thanks in advance ...

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ADF Struts on Login Box with User on DB

Similar Messages

Maybe you are looking for