ADFS Proxy configuration polling interval

Hi everybody. I was trying to increase the frequency at which the adfs-proxy queries the adfs-server to update its configuration. The powershell command set-WebApplicationProxyConfiguration -ConfigurationChangesPollingIntervalSec is supposed to do that.
However, no matter the value I configure, it always check every 60 seconds. I am running ADFS 2012 R2 with all the patches, updates...
Thanks in advance
// Raúl - I love this game

Hi Amig@. Yes, of course that you can ask :) In fact, I want to increase the period. My configuration is not expected to change very often and my Event Viewer is getting flooded with that events (8 records per server every 60 seconds).
It's curious that after a fresh installation the polling interval says to be 30 seconds (powershell) but in practice it is 60 seconds. It seems to be hardcoded somewhere
Thanks for your interest
// Raúl - I love this game

Similar Messages

ADFS 3.0 - Web Application Proxy configuration Issue

Hi All,
We are in the process of implementing ADFS 3.0 published to the internet for o365 Federation purposes.
The setup consists of the following
- 2 x windows 2012 R2 running ADFS 3.0 ( only one server presently installed and configured though)
- 2 x Windows 2012 R2 Running Web Application Proxy ( only one server presently installed and configured though ).
There is an F5 Big-IP load-balancer for both internal and external interfaces and it has been configured after a lot of issues with the SNI part on the F5.
So, in short the setup is now a single server hosting ADFS 3.0 using SQL and a single WAP server, however the traffic to these servers are still going through the LB.
Now the issue is that i cannot complete the installation/configuration of the Web Application Proxy server. There is a firewall in between our DMZ and the internal network. I can reach the internal services via the following url and telnet on port 443
to the federation service as well. (ports for 443 and 80) are opened to internal network on the load balancer ip . I can reach https://fs.domain.com/adfs/ls/idpinitiatedsignon.aspx and federationmetadata/2007-06/federationmetadata.xml location as well
from the Web APplication proxy server without any issues or certificate prompts at all.
When i do the configuration for WAP, i use the same account which was used as a service account for the ADFS service internally. If i use a local admin account, it errors out with another message stating the connection was closed.
The certificate on the internal server along with its private key was exported and has been imported on the WAP server . This is not internal CA, instead we are using DIGICERT SSL with SAN Names for enterprise registration and work folders. Hence the CA Chain
issue is ruled out and also this is not a wild card certificate.
When the wizard starts configuring, it does establish the trust with the federation service which is shown up in the event viewer with EventID 391 within 15 seconds i get another event id 422 which states that it cannot retrieve the proxy configuration
and eventid 276 on the Federation server which states the authentication failure. this continues until the servers stops to try configuring the wizard.
I have read all the available threads on the 3.0 WAP installation /configuraiton problem and tried all the steps possible but i am still stuck with this issue.
There is one more part that i noticed on the ADFS server, that the self signed services for the token-encrypting and token decrypting are self-signed certificates. Also, in the certificates it was showing up as not trusted. and i installed them to the TRUSTED
ROOT CERTIFICATION STORE after wich i cannot see any private key showing up when viewing the certificate which means i cannot get the MANAGE PRIVATE keys option when right clicking on the cert to assign read permissions for the ADFS service account.
Should i assign the same SSL sertificate (SAN based for enterpriseregistration & Workfolders) to the token-encrypting and token-decrypting services in ADFS console or should i leave them as self signed ? I did read that self-signed is not recommended for
production environment ? If not the same certificate what are the requirements for the certificate ?
I am not sure what I am missing in the configuration that is causing this issue. The WAP servers are not part of the domain and have also ensured the time synchronization between the domain machine as well.
The service name is fs.domain.com on both the internal and external DNS ( we have domain.com as a zone in DNS internally as well ). I am able to Authenticate inside and from the WAP server when accessing the link.
Could it be a Load Balancer Configuration ? [i will try eliminating this from the configuration]
Let me know if there are any options that i can try to resolve this and get the configuration working.
Cheers,

Does the load balancer pass the certificate session through to the ADFS server or are you offloading SSL. SSL offload does not work with WAP/ADFS integration (at least at the time of writing it does not).
Can you try through the load balancer with SSL pass through turned off please.
Also as ADFS 3.0 (Server 2012 R2) uses Server Name Indication (SNI) then any health checks that run on the load balancer must support this, so if they do not then you need to use TCP 443 checks for a listening port, as doing a standard HTTPS check will fail,
and if the load balancer fails its checks whilst you are configuring ADFS that might be a reason why it has gone offline for you (error 442 is to do with failure to swap client certificates between WAP and ADFS).
Finally, check the June update to Server 2012 R2 (http://support.microsoft.com/kb/2964735) as that has fixed some certificate issues with multiple servers for WAP and ADFS when you don't have the
2012 R2 AD schema in place.
Brian Reid
Exchange MVP and Exchange and Office 365 Certified Master
www.c7solutions.com
Brian Reid C7 Solutions Ltd (www.c7solutions.com)

Urgent: Configuring Database Polling Interval from BPEL Console

Hi All
Could we change the "Polling Interval" of a DB Adapter in a BPEL Process directly from the BPEL Console?
thanks
--debashis

Yes did
In bpel.xml
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="DbAd">
<property name="portType">DbAd_ptt</property>
*<property name="PollingInterval">10</property>*
</activationAgent>
</activationAgents>
U can update the PollinInterval from DeploymentDescriptor of the process.

Can we have a high Polling interval

Hi All,
It is a File to R3 scenario. I have three questions:
1. Can we have a polling interval as 5 hours. If not what is the least time that can be given.
2. The files might be put by the users in the end of the day. So, can the communication channel be turned on and off only when the files are put in the ftp. And if the channels are on all the time, is it a problem.
3. The Production landscape was also configured newly. Now i have done the configuration in Production. The receiver channel is a XI adapter. Now can i check if everything is working fine. I mean how can i check if the data will get transferred to the R3.

Hi Lavanya,
>>>Can we have a polling interval as 5 hours. If not what is the least time that can be given.
Setting polling interval in comm channel level is not best practice/suggestable...you can schedule the channel in RWB ATP so the channel would be available in that perticular time period
>>>The files might be put by the users in the end of the day. So, can the communication channel be turned on and off only when the files are put in the ftp. And if the channels are on all the time, is it a problem.
Though the channel available all time it is not a problem...but any way if you think files will be arrived only at perticular time then ATP scheduling would be the better option
>>>The Production landscape was also configured newly. Now i have done the configuration in Production. The receiver channel is a XI adapter. Now can i check if everything is working fine. I mean how can i check if the data will get transferred to the R3
you can check SXMB_MONI transaction in SAP ECC system
Also check the below blog for ATP:
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
Regards,
Naveen

Sender File Adapter - Restrict number of file polled at each poll interval

Hi all,
PI 7.0 SPS16.
We would like to know whether it is possible to configure a sender file adapter (file conversion mode) in order to restrain the number of file taken at each poll interval and if yes how ?
Thanks for your future answers.
Jean-Charles

Hi Jean
Standard adapter do not provide functionality to take an input like number of files to be taken at poll interval. But using adapter module you can achieve this.
SAP PI is having the function to set poll timings and scheduling. You can write adapter module and execute this module using File adapter type communication channel before the standard bean and you can restrict the number of files.
Check the link given above as well as this How to Guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Thanks
Gaurav

Poll interval for sender file adapter.

I have a 1_sender file NFS file adapter which picks a trigger file from X location in PI application server, this trigger file initiates the unix script present in the sender file adapter.
Unix script brings all the file which starts with 25588* from bank FTP and places in Y location in PI application server then script deletes the "trigger file".
another NFS File adapter 1_receiver file adapter places the trigger file in the X location of PI.
for 1_sender file poll interval given as 86400, that means it should trigger only once a day @ 1:30pm.
But today same sender file adapter had triggered 4 times, could any one let me know the reason why it had triggered 4 times instead of single time.

Vidya,
There are two things :-
1. The polling interval should be 24 hrs;
2. The polling interval should be 24 hrs and it should poll at 1:30 pm every day.
For any reason if the channel is re-started, then with your present configuration, you will never be able to achieve # 2.
So, better use ATP.
But today same sender file adapter had triggered 4 times, could any one let me know the reason why it had triggered 4 times instead of single time.
Might be the connection dropped / failed at the time of polling and the channel re-tried. If you give more details (what time and with how much interval it triggered), someone might be able to help.
Regards,
Neetesh

Get poll interval parameter from adapter module

Hi,
I'd like to make special treatment in my adapter module based on the "poll interval" information filled in Processing Parameters part of the adapter configuration.
Can an adapter module access this information?
regards
Yann

Hi Yann,
>>>>Can an adapter module access this information?
of course it can you just have to use
a correct parameter's name
check this post to get the java code
Re: Access the URL Parameter from a Adaptermodule
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to increase the files picked up by File Adaptor per poll interval

Hi,
We have a scenario where in we post 80 files in the source directory and and the file adapter is configured for every 300 sec but i have noticed that the File adaptor is picking up one or two files per poll interval.Can some please suggest how to increase the number of files picked up by File adaptor
Thank You,
Nandini

Nandini:
Did you mention all the files names in the Adapter channel. One thing you can do is use wild cards and file adapter picks most of them
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
In case if your files are huge, then I guess file size may cause to process few files during each poll

File adapter not reading (not starting polling interval)

Hello,
I've got one communication channel trying to read a file each 10 seconds.
The file adapter is configured correctly and the channel is started but sometimes it stops the polling interval process and I don't know why.
For example the channel was working fine until Friday but with no reason it stopped to attempt to read the file on the directory... what can it be?
And another question. What's the difference about communication channel with "Automatic control" or "Started" manually?

Hi,
And another question. What's the difference about communication channel with "Automatic control" or "Started" manually?
Whenever you create new communication channel in Integration directory and activate it,its status in control data is Automatically and whenever you change it in RWB (Stop/Start) its status changes to Mannually.
Thanks!

JDBC sender adapter polling data more than once within one polling interval

Hi,
Our sender communciation channel is polling data twice in one polling interval, hence triggering the corresponding BPM twice.
The polling interval for the channel is set to 30 mins.
We dont have an update query and use <test> instead. Currently there is no provision to use an update query in the source system.
Intermitently the polling happens within an interval of few milliseconds, because of which we are in doubt whether the use of Update query will solve our problem
Additionaly in the BPM, we have one channel which deletes the data from source system after the processing is complete by the BPM, but the second BPM is getting triggered before the deletion step is being executed in the first BPM.
Please Advise how we can stop the channel from polling data twice.
Thanks,
Merrilly.

Hi Merrilly,
Please ty to set an advanced mode option in the table(for sender
channel configurations) as follows:
Key name is "clusterSyncMode" and its values are either "scheduler" or
"none".(both are without quotes and case-sensitive)
Default value is "scheduler", this means it prevents 2
messages being generated regardless of 2 server nodes. This is true,
even if you do not add anything in advanced options table.
Also are more information about this parameter of file adapter, what
is the same for jdbc:
#801926 - XI 3.0 File Adapter: Additional Parameters
Regards
SK

Maximum Polling Interval in File Adapter

Hi,
Can you please let me know what can we set as the maximum polling interval in the Sender File adapter?
I have a scenario where I am setting the File Adapter polling interval as 7884000 secs. i.e.2190 hr= approx 3 months.
But the file adapter is polling at very short intervals.
Any help on this would be appreciated.
Regards,
Sampada

You need to configure the polling settings so that the system does not become overloaded, but at the same time, in a way that end users do not notice a major decrease in performance over time. Keep in mind that the greater the polling interval, the less frequently users will receive updates.
Adapter Scheduling - Hail SP 19 :-)

Polling interval started. Length: 60.000 s

Hi,
My Interface is from Legacy System to R3. That means FILE to Proxy.
Whenever I will place file in appropriate directory, the file is not pick up.
And in RWB, the status is green and its showing as
History:
- 2007-10-24 03:23:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:22:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:21:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:20:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:19:11 GMT: Polling interval started. Length: 60.000 s
The Adapter Status is Active only.
But, its not pick up the files.
When ever, I will Deactivate and Activate the Adapter, then only its pick up the files.
I am facing this problem most frequently.
Could you please suggest any one.
Whats is the exact problem and what we have to do.
Regards,
Nageswari

Nageswari,
The best way to check this is make the processing mode : Delete..
By this way you can easily check whether your communication channel is working fine or not....
Are you looking the file via FTP client?
-2007-10-24 03:23:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:22:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:21:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:20:11 GMT: Polling interval started. Length: 60.000 s
- 2007-10-24 03:19:11 GMT: Polling interval started. Length: 60.000 s
i can see here between two polls the difference is of 1 min...,
10/26/07 6:21:54 PM Polling interval started. Length: 10.0 seconds
10/26/07 6:21:54 PM Processing finished successfully
Ideally you should get message like this in RWB polling with success status of processing..
Let me know the result..
Regards,

Mail Adapter IMAP Polling Interval

Hello,
we are using a XI mail adapter with IMAP. It is possible to decrease the polling interval on the mailbox?
The default value is onces per minute.
kind regards,
Thorsten Dee

hi,
IT depends if the channel configured as the sender or the receiver.
For Sender there is "Poll Interval" Parameter
For Receiver there is no such option.
for more details see [this decumentation|:http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm]
Edited by: Pavel sheynkman on Dec 7, 2008 6:35 AM

Poll Interval, Msecs To wait before modification checks & Queue Name in CC

Hi All,
I have 3 inter-related interfaces which is having 3 File Sender Communication channels as below charasteristics;
All 3 ccs are running on a common Queue Name inorder to cater the business scenario;
so PI should consume the files in the same sequance of files are copping into the locations;
(time gap between incoming files is around 1-3 secs)
Existing Values in Production system
IF086
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 1
IF913
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 2
IF084
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 3
we are having PI Alert email configured in the system;
when we get a big files into the locations, we get an unwanted Alert emails saying Error;
when I check PI, Overall file transfer is successful,
but we have the below error in the Message Display Audit log as
"Channel CC_Cxxx: Attempt to send file 'T201_200909141702' failed because file was modified during processing. 0 bytes expected, 1202248 bytes found. Trying to resend file"
but Overall file transfer is successful;
Does anyone can explain the reason for this error; ?
Also to remove this error & unwanted Alert email (since final status is successfull), I changed the Poll Interval to 3 for all 3 above CCs; Now I dont get the above error;
Do you think there might be a sequance issue due to this change;?
(time gap between incoming files is around 1-3 secs)
quite lengthy to explain sorry;
Appreciate your help please
thanks
Iver

Hello Iver
Question 3 in the note #821267 FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter, explains what is happening here. This answers your first question.
The file in question was being written to by another process when the file adapter attempted to send it. Depending on the length of time/amount of data that is being written to these files, increasing the polling interval to 3 seconds will help.
Regards
Mark

Changing the workflow polling interval from 5 minutes

Trying to reduce the workflow polling internal from 5 minutes to something shorter. When a Change Request is created, the approval email goes to the manager and they reply with [Approved] or [Rejected] in the email. It sits in the workflow mailbox for
5 minutes before getting processed. I am sure its just editing the Management Pack but I can't figure out when setting to change and what to change it to if we wanted to reduce it to say 1 minute.

I THINK you are referring to the polling interval on the Exchange connector. this controls how often the workflow is executed that reads data from the mailbox. This operations is relatively expensive, so 5 minutes (300 seconds) is the default and recommended
minimum. you can adjust this interval from the configuration UI.
the workflow polling interval is how frequently each workflows is checked to see if they should run, and this is 30 or 60 seconds for most workflows. the polling interval is NOT how frequently the workflow executes, but instead HOW FREQUENTLY IT LOOKS TO
SEE IF IT SHOULD RUN. Take a look at http://blogs.technet.com/b/servicemanager/archive/2013/01/14/troubleshooting-workflow-performance-and-delays.aspx
for more details on what this value means.

ADFS Proxy configuration polling interval

Similar Messages

Maybe you are looking for