Adjust the frequency and the amplitude of the harmonic

hello all
I have a program that works but I want to know how do you adjust the frequency and amplitude of harmonics,
please find attached my program
thank you in advance
Attachments:
program.vi ‏41 KB

Hi Cherifalami,
With your VI it could be possible configure the amplitude and frequency of your harmonics directly through the equation you input to the f(t) generation VI.
Here is an additionnal code you could use to simulated a mutliple harmonics signal.
Best regards
Romain DUVAL || Application Engineer Specialist ||Certified LabVIEW Architect (CLA) || Certified TestStand Architect (CTA)
National Instruments France
Attachments:
exemple.vi ‏25 KB

Similar Messages

  • What protocol does the NI-DSA THD driver (or any harmonic analyzer driver) use to find and interpolate if necessary, harmonic frequences and corresponding amplitudes?

    When using the NI-DSA THD driver to obtain harmonic data, I find that the haromic frequencies found sometimes doesn't come close to the expected harmonic frequency.
    For instance, if I use a 20kHz span and 400 lines of resolution I would expect 50Hz bins. So if my fundamental is 500Hz, I would expect to see 6000Hz at the 12th harmonic but the THD driver can be off by up to 150Hz (ie, 6150Hz or 5850Hz).
    The output of the harmonic analyzer driver is an array of bundled values that contain x0, dx, and a data value array. Is it safe to say I can use this data to calculate exact harmonic test data (ie,
    x0=0, dx=50 so x(10)=harmonic amplitude at 500Hz and x(120)=harmonic amplitude at 6000Hz)?

    If it is that bug, the fix is in 3.17.3 which is in [core] now.
    My experience is crashes like that are usually hardware instability.  Last time it happened to me it was because my RAM.  I had to underclock it to make it stable.  If the kernel update doesn't help you, you could try running a stress test like Prime95.
    http://www.mersenne.org/download/
    If your hardware is unstable it will usually crash after only 5-10 minutes.  If you can run it for multiple hours that can help rule out hardware.

  • I have two input data one frequency and other amplitude now I want plot amplitude versus frequency plot...Can I do it

    Please help to the earliest.....
    Solved!
    Go to Solution.

    And don't use the subject line for your question!

  • Adjusting the backup frequency

    How can I adjust the backup frequency of the daily, weekly and monthly backups by TM? I thought I knew but simply canlt find the way anymore.
    Thanks

    Use something like Time Machine Editor (➚), unless you want to manually manipulate the .plist (➚) or the launch daemon (➚) directly.

  • I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

    I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

    I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • How do I adjust the display and sound with my Macbook Pro connected to my Sony Bravia?

    I just bought the DVI - HDMI and then connected my Mac to my 46" Sony Bravia.  It works obviously cause I'm typing right now, but it is so painful to try and read anything less than what appears to be 14 font or so.  The display is set at 1080p obviously because that's the whole point of this, but is there a way to try and make things bigger?  I don't want to sit super close to the TV and fry my eyeballs, that also defeats the purpose of this.  Another question regarding sound.  It seems I can only adjust the sound from my keyboard, but I would rather do it through my TV's volume control so I can make things louder.  Any help would be awesome.  Thanks.

    mcfancher wrote:
    Thanks for the reply.  My dumbself forgot that right next to my new TV is my old TV, a 40" Samsung LCD.  Now I put it on my desk and I have it in 1080p and everything is going good except for the fact that I can't see the top bar on my desktop and now the sound seems to be coming exclusively from my Mac instead of my TV, although I still have it hooked up with an HDMI cable.  Any new thoughts?
    EDIT:  Ok fixed the display issue, but I'm still getting sound out of my Mac.  Really confused on what to do.  I don't see why I could get audio out of my Sony TV with an HDMI cable but not my Samsung.  Doesn't the same principle apply?  Xbox and PS3 work that way, so pretty confused unless I need to get a digital audio cable or something.
    Message was edited by: mcfancher
    If everything else is the same, that is strange. I have seen a post or two that reported only certain HDMI ports working with computer input, so if the Sammy has another HDMI input, give that a try.

  • Is there a way to adjust the bass and treble on my iMac Power PC sound system?

    Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

    No, but iTunes has an Equaliser that enables you to do that.

  • The latest Firefox version won't expand to make text and images more visible on my 32" screen, although I have tried to adjust the advanced Windows appearance settings in the same way that has worked in previous versions of Firefox.

    Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

    Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

  • Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

    Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

    Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project.  And you can create a "template project" that includes this "text" clip.  Save this project and then to a get info and check "stationary pad."  When you double click on this file, fcp will open with a copy of this project and you just need to do a save as. 
    I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.  

  • How do i adjust the contents on one layer at a time and not the whole image - photoshop cs6

    hi
    i am creating a photo thing in photoshop cs6 and i have a mountain behind a layer that is visible and in total i have about 6 layers and when i try to change something on layer 6 (so somehting like the saturation and hue) it changes whats on layer 5, at the same time, so how do i make it so i just adjust the contents on layer 6?
    thanks
    mrredrunner100
    ps thought this might help
    https://drive.google.com/file/d/0B1KO1zQcxYLWazZNRDh1Q3ZaMmc/edit?usp=sharing

    hello.....
    while on the  adjustment layer the properties panel will show a button that looks like so:
    if you select it the adjustment will only be applied on the layer below and the adjustment layer will look like so.
    hope that helps.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • When I try to adjust the date and time of an event by selecting Photos from iPhoto, the year I enter is altered.

    I have images in iPhoto from an older digital camera which did not record the date and time.  In iPhoto, with an event selected, I have tried to adjust the date and time by choosing Photo.  When I adjust the date and check Modify original files, it makes the date much earlier--in centuries.  I now have an event from August 2003 (the date I entered) which reads June 2, 1251 under the event!  When I attempt to correct it, it goes back further in time.  What am I doing wrong?

    (I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
    Why are you using iPhoto at all? use image capture or drag and drop the photos
    The problem is that the files I am copying are getting stripped of the EXIF metadata
    eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen  For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
    Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
    Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
    LN

  • Is it possible to adjust the photo angle and size in Snapshots theme

    Hi
    I'm new to aperture and am having a few frustrated-hair-pulling issues with the Snapshots theme. I was using iPhoto to create a Photobook of my son's first year and found it to be too limited for what I want to create. I came across Aperture and was wow'ed by the description saying I could rotate and resize photos, add text boxes etc. This was just what I was after so I downloaded the free trial to test it. I like the snapshots theme the best for the idea of it looking more "homemade" but seem to be unable to adjust the photo angle and size from the given templates. Also I find that the border in adding new photos (which I can adjust the size and rotation of) is without the custom shadow effect that the template ones have. Duplicating the template photo only gives one with the shadow effect but also of the same size with the same rotation that I can't do anything with! Rrrrghhhh
    I thought this would be a great way to customize the album I'm making for my little boy, and that it wouldn't be too hard! My mac skills are considerable, but I'm by no means an expert! Is this program too much for a non-pro-creative-housewife with a wish that may be solveable in iPhoto afterall?
    Or am I just missing something? Is there a way to do this or shall I just give up and choose another theme?
    Any recommendations are welcome! Please!!! My scalp is now officially sore!

    Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
    http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
    A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

  • I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

Maybe you are looking for

  • Shared calendar event

    I have a shared calendar with my schedule that I share with my boyfriend. He also has a shared calendar with his schedule that he shares with me. the last 2 weeks events havent been showing up until a day later, and now they arent showing up on my en

  • Where do I insert code for mountain lion upgrade?

    I have obtained my code to upgrade to Mountain Lion but cannot find how to use it. I'm probably missing a simple solution but a pointer in the right direction would be appreciated. It is a free upgrade for a macbook pro. Thanks

  • My machine meets requirements, I cannot install??? does anyone else have this issue?

    here is the error I am getting. ERROR: ASU has quit unexpectedly. ERROR: Media DB Error : 18

  • .src.rpm for OEL 5.5

    hello I am talking about the openmotif-2.3.1-2.el5_4.1.src.rpm format it is .src. how to run source RPM which in above format. I had used rpm -i openmotif-2.3.1-2.el5_4.1.src.rpm error: cannot create %sourcedir /usr/src/redhat/SOURCES yum install gli

  • FCP X on Older Laptops

    I have an older MacBook Pro that has a 32-bit Intel Core Duo processor.  Will FCP X not run on this Mac?  Or will it run with limited functionality?