Adjustement layer on one layer

Hi,
Automatically, Adjustment Layer applies on all layers below.
How can I apply an Adjustment Layer to only one of the layer below?
EX. from bottom to top, I have Layer #1, #2 and #3. This order is important. I created an Adjustment layer on top of all. I want it to be apply on layer #3 only. I don't want Layer #1 and #2 to be affect by Adjustment layer.
How can I do it?
thanks

Hold the alt key and click between the adjustment layer and the layer beneath it. You'll see the cursor change and once you click, the adjustment layer will be clipped to the layer below.
Clipping mask is the keyword. More about them here:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7853a.html

Similar Messages

Making an adjustment layer only affect one layer

How is this done? Whenever I select an adjustment layer when I'm on an existing layer, I think it's going to link itself to that layer but it doesn't. How can I make an adjustment layer only affect the one beneath it, or even link it to it?

- Hold option and click between the two layers (your cursor will change shape)
- Have the adjustment layer active and create a clipping mask (command-option-g)
- Put both layers in a group and change the group blending mode to normal
The first two are the same way to get a clipping mask. More about them here:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7853a.html

Changing opacity in an adjustment layer to affect just one video track

Premiere Pro CS6
Hi,
I have a sequence of images in one video track that creates an animation and I've added an ultra key effect to remove the background of every image one by one (not sure if there was a better way to do this but anyway). Now I want to introduce this animation slowly with an opacity change but I can't seem to make it work. I've tried adding an adjustment layer and changing the opacity but this didn't work, I only want to change the opacity of this animation, not the other video track as well. So then I added a transform effect to the adjustment layer. I adjusted the opacity within this transform effect in this adjustment layer but I can't seem to make this work well either.
I've tried exporting the animation as a separate file so that I can bring it back to my project as one clip, but I'm a bit lost as to what kind of file to export it to. I tried an AAF file but that didn't load into my main project at all well and I had to force PPro to close.
Thanks.

Make your animation in its own sequence.
Then bring that sequence into the EDIT SEQUENCE. ( a Nest)

Applying an adjustment layer / or adjustment TO a layer in a grayscale image is NOT happening!

I'm a long time user of Photoshop, but must admit to being stumped here. I have a very high resolution scanned image from a B&W antique engraving, and I'm trying to "open up" some of the lines to bring out the details in the engraved image while keeping the image as close to the "line art" B&W of the original as possible.
I have the image now "cleaned up," having taken out the yellow color casts, etc., and have a grayscale 8-Bit image in the Photoshop file.
I've discovered that I can use an adjustment TO the layer itself, or an adjustment layer on the layer in the grayscale image to take away some of the density and "open up" the line art a little, so it has better details by effectively "choking" the dark lines back to make them less thick and dense.
Here's the thing, though:
When I tried making the adjustments via image > adjustments > levels DIRECTLY ON the layer (instead of using and adjustment layer to achieve this), every time I hit the OK button to accept the adjustments I've made that way, the dialog box closes and the layer seems to revert to looking just the same as it did BEFORE I opened the dialog box to adjust the layer!
When I try making the adjustments by using an adjustment LAYER, and I try to save the Photoshop image as a TIFF file, I find that when I open the saved TIFF image, the layer adjustment I'm seeing in the source Photoshop file has NOT been applied, and the image in the saved TIFF file looks just as dense as the original, unadjusted image in the Photoshop file!
What am I doing wrong here? I want to be able to save out that adjusted image as a TIFF file to use in designs, but I cannot seem to save it as a TIFF that actually CONTAINS or reflects these adjustments after having MADE the adjustments!
Whazzup?!!

Well, I took the layered TIFF file you gave to me and opened it in Photoshop, reviewed the adjustment layer in there and its effect -- thanks: you get what I was trying to do -- and then saved it out as a flat TIFF image, and when I reopened it, voila! it looked like the adjustment had indeed been applied. So this IS a real head-scratcher indeed.
I've now tried going back to my source file and doing the same thing. One thing that I notice is that when I do the Save As of the TIFF with the adjustment layer in it (OR the PSD file, for that matter), when I go to Save YOUR file, the Layer Compression Options are grayed out, but when I go to Save MY file, the Layer Compression Options are active. I've tried now saving both with RLE layer compression AND As a Copy ("discard layers and save a copy"), and neither works.
I noticed, too, that your file had the layer below the adjustment layer still as a "Background," instead of a named layer, so I went back and applied an adjustment layer to a copy of my TIFF file, leaving the image in its layer as a Background layer, and still this did not work.
The only other difference I saw between your TIFF file and mine, is that mine contained transparency, as I've silhouetted away a portion of the image to isolate the central image of the scanned engraving. But even when transparency is not a factor (i.e. I go back and start with a flattened, nontransparent image layer of my TIFF file with a single Background Layer, and I apply the adjustment layer to that, I get the compression options grayed out on Save, and STILL the saved TIFF image I get out of it has "reverted" to the unadjusted appearance.

Cross-dissolve from white frame to adjustment layer no longer works in CC 2014

Windows 7, Premiere Pro CC 2014
I have a video clip in a nested sequence on V1 and an adjustment layer on V2.
I want to dissolve from a white frame to the clip using the adjustment layer.
In PP CC (not 2014) this was simple:
Starting with a white PNG graphic on V2, cross-dissolve to the adjustment layer.
However, in PP CC 2014, this causes a dissolve to BLACK over the duration of the dissolve and then a CUT to the video.
This behavior in CC 2014 is illogical. Why has it changed?
There are other ways to do this, but this one was quick and easy, and is required for hundreds of clips in existing sequences / projects.
Response from support via live chat:
thank you for your patience
the adjustment is layer is not functioning properly
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
please mention it in the feature/bug request form

For me with a color matte it shows exactly the same behavior as with a PNG.
You're dissolving between the matte and the adjustment layer on V2?

Why are the adjustment layer controls grayed out?

I have used an adjustment layer in CS5 and when it was first used I could adjust everything. Now most of the controls have grayed out and whilst I can slide the sliders I can not type figures in nor use the radio buttons! Why has it locked me out? It has happened on a few images and with both Colour Balance and Hue and Saturation Layers.
The image above shows the problem with the top Colour Balance layer where I can not select Shadows or Highlights, nor type in figures for the sliders BUT I can slide them and change the tick on Preserve Luminosity! The basic image being edited is an 8-bit RGB file.
Adding a new adjustment layer (Colour Balance) on top of this one initially showed the same problem but after adding 3 more new adjustment layers suddenly eveything came back to fully working again - even the original problem layer!
This problem keeps happening with some of my images. It is happening on all 3 of our photoshop PC's, so it looks like a basic PS bug. Has anyone else seen this or know why it happens?

Thanks for the suggestion but that has no effect on them being grayed out or not. When this problem occurs it does not matter if the Mask is highlighted OR the adjustment itself.
But thanks anyway.
I am currently without the issue on the above example having removed the problem by adding additional adjustment layers and removing them again. Even if I now select just the adjustment mask I can still access ALL adjustment controls without problem.
But it will occur again as it has done over the last few months on a random basis. Hopefully someone else has seen this occur and found a solution?

How to fix numeric entry box in Curves adjustment layer?

In the Curves adjustment layer Properties box there are numeric entry boxes for changing input and output values. The first few times I experimented with changing the output values of a selected point in the R, G, & B channels, all went well. Now, although I believe I am using the same method, I can only access the input value box. The moment I click on the output value box both boxes black out and no entry is possible. I'm using the Windows version of Photoshop CC, so Tab doesn't work to get from the input to the output box. I have tried resetting the Preferences for Photoshop and that seemed to work once, briefly, but now that makes no difference.
I have fixed the problem with Adobe Customer Support Chat. The solution was to delete the Adobe Photoshop CC Settings folder. With Photoshop closed, open the Start menu and type %AppData% in the search bar (Windows 7); this takes you to the Roaming folder where you then navigate to the Adobe folder and the Adobe Photoshop CC folder. We removed the Adobe Phototshop CC Settings folder by dragging it to the desktop. Once it was established that this fixed the problem, the folder was deleted from the desktop.
Message was edited by: C55279
Problem solved

I've noticed that a few times on windows 8 32 bit, photoshop cs6 32 bit with 4gb of ram, a nVidia 8400 gs graphics card and open gl seems to work fine.
I guess that's probably some kind of glitch.
One way to get back the dropdown is to click on the Curves Display Options in the flyout menu and then just click OK in the dialog.
Added: It doesn't seem to happen if the crop tool is set to Classic Mode.
Message was edited by: R_Kelly

The eyedropper tool does not work with a hue saturation adjustment layer

I am using PS CC 2014, and the problem I am having is that when I want to use the eyedropper tool to adjust the colour range affected by a Hue/Saturation adjustment layer, rather than selecting the colour in the Properties window for the adjustment layer, use of the eyedropper closes the properties window and changes the foreground colour in my palette.
Here's the real hitch... the same thing happened to me at school last night where a) the Mac's are older and b) CS6 is still used.
It's something with my user settings, to be sure, because the prof logged into his account on the Mac I was using in class to test it out, and it worked for him; we logged back into my account and it still did not work for mine.
Any ideas?
Thanks for any insights.
RP

Indeed Trevor, that did solve the problem. Clearly it was something I changed... wish I knew what. But, I have a list of all the settings changes I made before, so I can figure it out by making one at a time then checking...
RP

I can't get photoshop to record a curve adjustment layer preset.

I am trying to record an action on a colleague's machine that has a custom curve setting but cant seem to get it to stick as a playable action step. He has one of the new trashcans (Mac Pro) with a system version of 10.9.4 and photoshop version of 2014.2.2. I am able to do it on my machine by recording the addition of the curve adjustment layer then selecting a pre-created curve preset. I am running Photoshop 2014.0.0. This does not work on his machine....quite maddening. Any ideas?

Did you set up the custom setting as a preset on all machines that will be using the action the loads the curves preset?
How did you record the Levels adjustment?
Did you add an adjustment layer or just use levels?
If you added an adjustment layer two step are recorded in newer versions of Photoshop. First step add the adjustment layer the second step setsl adjustment settings. The recording of the adjustment setting is delayed till you commit the adjustment by doing the next action step. How the add adjustment layer plays back can vary for Adobe introduced bugs in CS4 adding the Adjustment Panel they included two option that can change how Photoshop operates. And Actions and Scripts can not control or access these options.

Photoshop CS6 Action Player Bug Make Adjustment Layer Applied to all to be Clipped

On Oct. 11, 2010 I received the following from Adobe Support
Hi John,
This is to inform you that we have been able to reproduce the same {Photoshop Actions} behavior at our end.
So we have logged this issue with the Product Team and Engineering Team as Bug # 2737069. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/.
You may also log this issue directly with our product teams, through the following Feature Request/Bug Form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&samcap=EWQQL&promoid=EWQQL
I am closing case # 181675168, if you have any new information, please contact Adobe Technical Support referencing the case number so that we may re-open the support incident.
Thank you for choosing Adobe.
Thanks and Regards,
Rajdeep Kaur
Technical Support Consultant (Tier 2)
ADOBE Systems
I reopened the case for there was no fix Adobe contacted me and told me it would be fixed is some future release of Photoshop and once again case # 181675168 was closed over my objection.
I was vocal about Adobe poor excuse for support in forums. I then was contacted by Jeff Tranberry of Adobe he was asked to contact me by John Nack to see if he could change me. We exchanged some e-mails ending with Jeff writing unfortunately, you issues has been deemed low impact and has been deferred.
May 7, 2012 I called Adobe to find out if this bug was fixed in Photoshop for I did not want to buy CS6 if the Bug was not fixed. After about an hour on the phone talking to many Adobe employees including Adobe Support referenced case # 181675168 log as Bug # 2737069. I was told the bug was not in CS6. So I ordered CS6. FedX dropped off Today I installed it only to find the bug introduced is CS4 reported in CS5 is still in CS6.
Adobe when will you fix this bug # 2737069????

Case History
Case #0181636711 Assigned Bug # 2679265
Updated
Thursday, September 30, 2010 10:50:22 AM PDT
Opened
Thursday, June 10, 2010 8:21:19 PM PDT
Status
Withdrawn
Product
Photoshop CS5
Support contract
Adobe Support Program
Subject
CS5 Action Feature Bug
NOTES & RESPONSES
Notes from Customer
Thursday, June 10, 2010 8:21:19 PM PDT
CS5 has a bug recording and playing Actions that add Adjustments layers. Old actions recorded before CS5 and actions recorded with CS5 may or may not Play/Work correctly.
Before there was an Adjustment Panel all Adjustment Layers were added applied to all layers and you needed to clip them after the were added if you wanted it clipped. The new adjustment panel made it possible to add a adjustment layer clipped to the current layer. However a clipping parameter is not recorded by the action recorder just the type and setting are recorded.
When a make adjustment layer step is play it is either clipped or not depending on the state of the adjustment panel's clipping icon. If it not in the same state as it was when the action was recorded it will be add incorrectly. It would also be impossible to create an action that added some adjust layer clipped and others that are not.
I feel the is a serious bug which needs to be addressed. I believe the solution is simple and even old actions will also work.
Two patches are needed.
One in the Action recorder. If the step being recorded is make adjustment layer and the adjustment panel icon state is clip to layer this needs to be recorded in the action step record. If the layer is to be applied nothing extra needs to be recorded in the step record just leave it as is like actions prior to the adjustment panel.
The second patch in the Action Player. If the step that is about to execute is a make adjustment layer. The Player needs to save away the state of the adjustment panel icon. Then check the adjustment step record to see if it is to be clipped. If so set the adjustment panel icon to the clipping state else set it to the all layers state. Then do/call the add adjustment layer function/routine on return restore the adjustment panels icon from the saved state. Proceed to the next step.
I have been trying to report the bug for days. Please at least acknowledge you received my bug report.
Thanks
JJ
Browser: Other
Operating System: Windows XP
Has it ever worked? If so, what's changed? (provide comments in description field): Not Applicable
Same results with different file?: Not Applicable
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: Not Applicable
Auto responsce from Abobe will close case unless we here from you
Notes to Customer
Friday, June 11, 2010 5:04:44 PM PDT
Hi John,
Thank you for contacting Adobe Technical Support. My name is Saurabh. This is in regards to your concern posted on Adobe web support portal
regarding an issue with Adobe Photoshop CS5.
I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
I would like to inform you that we are still researching on this issue. Once we find some new information, we will get back to you.
I apologize fore the inconvenience caused.
We are always happy to assist you however, in future if you face any problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
User to User Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
PLEASE NOTE:We will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
Regards,
Saurabh Jain
Adobe Technical Support
Notes from Customer
Friday, June 11, 2010 6:01:35 PM PDT
I consulted your knowledge base and I called customer support. This bug has not been listed. Custom support had me fill out a bug report at https://www.adobe.com/cfusion/mmform/index.cfm? name=wishform which I did but that was not even acknowledged. I demonstrated the bug to customer support by sharing my screen.
As for you forums for some reason the forum web site states my Adobe ID is disabled so I can not append or start a thread there id screen name jjmack. I created a new Adobe ID yesterday [email protected] that to seems to be disabled or I can not come up with any screen name the is availably I have tried many. Every simple or outlandish name I have entered generates the same message screen name not available. I'm at my wits end I've been using Photoshop since Photoshop version 3. Over the years it seems to get harder and harder to communicate with Adobe....
Notes to Customer
Saturday, June 12, 2010 1:58:07 PM PDT
Dear John,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
As this issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Saurabh Jain
Adobe Technical Support
Notes from Customer
Tuesday, June 15, 2010 12:03:49 PM PDT
simpler then I first thought. Upon more investigation this is what I see.
I skipped CS4 and when I installed CS5 I discovered a nasty bug had been introduced is Photoshop's Action facility most likely in CS4.
Action that add adjustment Layers clipped to the current layer that step is recorded Make adjustment layer with Clip.
Action that add adjustment Layers not clipped Step records as Make adjustment layer.
When a step Make adjustment layer with Clip is played back that is what Photoshop does.
When a step Make adjustment layer is played back what Photoshop does is look at the adjustment panel clipping icon state and and if it is clip to current layer Photoshop does clip the adjustment layer to the current when is should be applied to all.
Many of the actions I have created add adjustment layer applied to all then later clip them to the current layer. These actions generate an error message if the Adjustment panel clipping icon is set to clip. Because the layer get added clipped clipping it is not available. The strange thing is the layer is clipped the way I wanted it to be. But actions I recorded where I want the adjustment to apply to all are clipped and the is no error message just wrong results.
Notes from Customer
Thursday, June 17, 2010 1:00:02 PM PDT
I was told 24 hours to fix my ID. I kept myself logon this machine.now I can not even logon.
Notes from Customer
Friday, June 18, 2010 1:31:42 PM PDT
My user ID is now operational again after I requested an password e-mail so I could reset my password. When I received the e-mail I was able to set my accounts password and once again participate in Adobe's forums.
The is still no change in the status of my bug report. I would like to be able to play actions and know the will work the way there were recorded.
Notes from Customer
Saturday, June 19, 2010 6:56:24 AM PDT
Create a one step action that add an adjustment layer that applies to all layers.
Play that action with the icon in the adjustment panel is set to apply to all layers. Change the status of that icon to clip to layer and play the action again.
You will find the first adjustment layer was added correctly apply to all layers like it was recorded the second adjustment was added clipped to layer when it should be applied to all...
Notes to Customer
Thursday, July 1, 2010 9:53:35 AM PDT
Dear John,
Thank you for contacting Adobe Technical Support. My name is sauarbh. This is in regards to your concern posted on Adobe web support portal regarding an issue with Adobe Photoshop CS5.
I understand the importance of your time in getting the issue resolved and we assure you that this will be taken care of with utmost importance. We appreciate your cooperation with us.
As your issue demands a real time interaction, so we are arranging a call back for you.
Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
1. Your Preferred Day to attend the call
2. Your Preferred Time to attend the call
3. Your Time Zone
4 Your Phone Number
The callback team works from 10 AM to 7 PM PST.
Kindly revert to us with the above stated information so that our call back team can contact you within 24-48 working hours.
Please note :- Our Call Back team works Monday through Friday.
The callback team works from 10 AM to 7 PM PST.
Regards,
Sauarbh Jain
Adobe Technical Support
Notes from Customer
Thursday, July 1, 2010 10:10:44 AM PDT
Please provide the below mentioned information so that our call back team can contact you to resolve your issue:-
1. Your Preferred Day to attend the call
Mon through Friday
2. Your Preferred Time to attend the call
1 PM to 10 PM any time
3. Your Time Zone
Eastern USA Time
4 Your Phone Number
845-xxx-xxxx
Notes from Customer
Friday, July 2, 2010 8:43:30 PM PDT
July 2 Adobe support called me once again they share my display and I demonstrated the bug for a second time. This time the stated they were recording my demo. After I demonstrated the bug they put me on hold for a while. Upon returning they informed me that there was still no circumvention or fix for this problem. They wanted to know if I was at the latest software level they were still sharing my display so I did a Photoshop Help About Photoshop to show I had the latest update Photoshop version 12.0.1. Told me they were not capable of handling this problem and would have to refer this to senior technical support that they would determine if it was a bug. What a joke Adobe junior technical support can not even recognize a bug when it has been demonstrated to them on two occasions now and also received several case update from me. Adobe you need better support personal.
Notes to Customer
Thursday, August 5, 2010 2:39:56 PM PDT
Hi John ,
Thank you for getting back to us.
I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
I would like to inform you that your issue has been logged as bug so the workaround is obviously to make sure the clip to layer is not enabled prior to running any of these actions.Also my Product Team and Engineering Team are working on this issue you can use the work around as mentioned above.
This should resolve your issue. If it does, please let us know, however in case it does not; please revert with any new information that you might want to add which will help us in resolving your issue.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
PLEASE NOTE: we will be waiting for your reply on this case. In case you are unable to respond we will be sending you a reminder on the 2nd day (From the day of our response to you) and then the case will be auto closed on 7th day assuming your issue is resolved. However, you can reopen your case by visiting our web support portal and we will be happy to assist you further.
Regards,
Adobe Technical Support
Notes from Customer
Sunday, August 8, 2010 9:26:50 PM PDT
Any work around does not solve my problem. Thousands have downloaded my actions. There is no way that I can contact them to make the aware of any work around. I can code around this bug but again I have no way to get the update to those that have downloaded my actions for they are free. All that is logged is the number of downloads. No registration is required so there is no way to contact the users that downloaded my actions. The problem will only be resolved when adobe updates Photoshop and fixes the problem.
Notes to Customer
Wednesday, August 11, 2010 1:58:23 PM PDT
Hi John ,
Thank you for getting back to us.
I would like to apologize for the delay in providing you a faster resolution to your issue and appreciate your patience with us.
I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Thursday, August 12, 2010 9:13:56 PM PDT
This case should not be closed till there is a fix for this bug. How can Adobe Support close a bug report when Adobe acknowledges its a bug where Adobe Support does not provide a fix. Blowing smoke with statements like "if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site". Photoshop CS3 work correctly Adobe broke the Action Player in CS4 and its still broken is CS5. "if a fix is possible!"!!! Are you joking? What kind of support is that? Do you get a bonus for closing bug reports without fixing the bug? Does it make you look good inside Adobe. I can tell you from the outside there is a foul stench emulation from Adobe Technical Support.
Notes to Customer
Monday, August 16, 2010 2:30:22 PM PDT
Dear John ,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
This issue would require support from a senior level and hence I am forwarding your case to the next level of support for extensive research and to find a resolution for the problem at hand. I'll get back to you once we receive a reply from the concerned department.
Please note that the expected turnaround time for resolution to this case from next level of support is 5 business days. I apologize for any inconvenience caused.
We are always happy to assist you however, in future if you face any technical problems with Adobe products, you may also try referring to our knowledge base & User to User forums by clicking on the following links:
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Adobe Technical Support
Notes to Customer
Thursday, August 26, 2010 4:25:48 PM PDT
Dear John ,
Thank you for getting back to us with the required information and we appreciate your patience in helping us to resolve your issue as soon as possible.
I would suggest you to please go to through the KB document to move actions from Photoshop CS4 to CS5 given below :
http://kb2.adobe.com/cps/860/cpsid_86020.html
Please make sure about the loaction of actions which you created or saved in Photoshop CS4, go to that location and make sure you have all the actions there.
Did it ever work in Photoshop CS5?
Try to make a copy of the action that he is trying to run, remove the 'Hide' command and re-record hide in PS CS5, put it into the action, and see if that works.
Or try making a short action along with Hide command . If this works, then something might have got changed between the version.
KnowledgeBase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support. Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Friday, August 27, 2010 8:15:11 PM PDT
This is the reply I received from adobe support you. I want this case open till it is resolved. Your trying everything to close it unresolved. Now your giving me instructions on how to migrate from CS4 which I don't have??? Please fix bug #{2679265}.
++++++++++From Adobe support+++++++++
I have logged this issue with my Product Team and Engineering Team as Bug #{2679265}. Adobe’s Engineering Team will look into this issue, and if in the future a resolution or fix is possible, it will be available from the Adobe Systems product update web site: http://www.adobe.com/downloads/updates/
I am closing case#{181636711}, if you have any new information, please contact my team within 14 days, with the details, so we may re-open the support incident.
+++++++++++++++++++++++++++++++++
Notes to Customer
Monday, August 30, 2010 5:14:11 PM PDT
Hi John ,
Thank you for replying back.
I would like to inform you that that we are working in techinical support department and fixing any issues or Bug with the product is done by the developers team. As they are already working on it and we don't have any update as how much time that gonna take. If you want we can have the case as open and as soon as there is any fix for the same, you will be getting the update on Adobe website.
I hope this will address your concern.
You can also try referring to our knowledge base and User to User forums by clicking on the following links:
Knowledgebase: http://www.adobe.com/cfusion/search/index.cfm
U2U Forums: www.forums.adobe.com
To know more about Adobe products, please visit our product page:
www.adobe.com/products
Your technical support case number for this interaction is: 181636711
Thanks for contacting Adobe Technical Web Support and we appreciate your time spent.
Have a nice day.
Regards,
Adobe Technical Support
Notes from Customer
Tuesday, August 31, 2010 7:51:16 PM PDT
Yes leave it open
Notes from Customer
Monday, September 6, 2010 5:57:14 AM PDT
Thank You
Adobe Support Call me and told me it would be fixed in the next release of Photoshop and asked me if they could close the case. I replyed IMO that is not the proper thing to do do what you want...
========================================================================================== ========================
As you can see Adobe marked the case
Status
Withdrawn
by Adobe over my objection.

CS4 won't let me erase part of an adjustment layer

I have Adobe Photoshop CS4 and what I USED to be able to do with CS3, I can no longer do. Any suggestions are welcome.
I have a photo that needs a portion of the yellow desaturated. I created a duplicate layer, did a desat adjustment, selected the mask (on the saturation layer) and tried to erase. It will do nothing. It should erase (which would bring back my original layer's colors) everything except what I don't want fully saturated.
I have reset my tools, thinking that was the problem, but no luck. Anybody have any ideas??
Oh! And this also happens with ANY adjustment layer - curves, levels, etc. etc.

I agree that the Brush Tool is the logical choice to use. However, one can paint in with the Eraser Tool, by hitting the X key. I'll often have the Eraser Tool setup with, say the Block, and my Brush Tool setup with normal "Brush" characteristics, and go between them, hitting the X key to swap the Eraser from "erasing" to painting.
I believe that this is what happened to the OP, and X will swap the colors to give one the opposite effect.
Hunt

How do I create layers in an adjustment layer and transfer those layers?

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my lay out and what i've done this far.
Thank you

You need to get out of single image view. Go to the editor preferences>general>Allow Floating Windows, then go to Window>Images>Float all in Window, then Tile or Cascade. Then you should be able to drag the layers from the layers panel for one image into the main image window (not the panel) for another image.

Grouping Adjustment layer with Gradient Fill layer

Page 151 of "The Missing Manual" suggests that one should be able to group a Levels Adjustment layer with a Gradient Fill layer so that the levels adjustment fades out to one side.
If I understand this correctly, the setup would be:
Levels Adjustment Layer (grouped with layer below)
Gradient Fill layer (with a gradient from Opaque to Transparent)
Photo in Background layer
but I cannot get the desired effect of original picture on one side blending through to adjusted levels on the other.
I can get the desired effect if I dispense with the Gradient Fill layer and simply manually create the gradient on the mask of the Levels Adjustment layer but this loses the advantage of easy adjustment of the gradient.
[Thanks to those who answered my question about linking a mask to a layer. As this is a separate query, I thought it best to start a new topic]

Sanders1,
I thought I'd try it, myself, and got results that I did not expect...
http://www.pixentral.com/show.php?picture=1OVdT0C7oX46DsPm6TrfT5xxrm3h
1 - The background image.
2 - I created a Gradient Fill layer using color (red) to transparent.
3 - I created a Levels Adjustment layer, set to reduce red and green,
leaving a blue image.
4 - I grouped the Levels Adjustment layer with the Gradient Fill layer.
Is this the type of result you are seeing? I wonder what is the logic.
Byron

Using color sampler values with curves adjustment layer

Hi, I have just started trying to teach myself javascript. Based on preliminary research, it's become apparent that there are many functions in Photoshop that are either extremely cumbersome or impossible to code by hand without using the Script Listener.
My goal is as follows: first, I will manually load two photos as layers in a single document. Then I will manually place two or more color sampler points on the document. At this point I would like the script to create a curves adjustment layer (ideally clipped to layer 2) and place as individual channel anchor points the RGB data from the color sampler points on Layer 2, and then adjust the output of the points on each channel to the color sampler RGB values of layer 1.
As my first script, I realize this is probably going to be a lot of work.
I did find some code that returns the average value of manually placed color sampler points. Conceptually then, I would need to add code which creates a new curves adjustment layer and adds those RGB values (from a specific layer) as anchor points on the individual channels, and then hides one layer and looks at the RGB values of the color sampler points, and uses them as the output values for each anchor point.
Sounds simple enough from a conceptual standpoint.
I'm looking for some guidance on how to get started.
Which parts will I definitely need Scriptlistener for and will that be adequate to do the job?
How would you recommend I get started on this?
Thanks very much for any input.

The function I had provided was an example into which you would need to feed the values you got with Mike’s code.
The code below would create a Curves Layer as shown in the screenshot, but I’m not sure it would work reasonably for all cases.
// with code by mike hale;
// 2012, use it at your own risk;
// call the function to run the script
#target photoshop
createCurveAdjustmetFromColorSamplers();
// create a function fo hold most of the code
function createCurveAdjustmetFromColorSamplers(){
    // first add some condition checks
    // needs an open document in a color mode that supports layers
    if(app.documents.length == 0 || ( app.activeDocument.mode == DocumentMode.BITMAP || app.activeDocument.mode == DocumentMode.INDEXEDCOLOR ) ){
        alert('This script requires a document in Greyscale, RGB, CMYK, or Lab mode.');
        return;
    // check for at least two colorSamplers
    if(app.activeDocument.colorSamplers.length < 2 ){
        alert('This script requires at least two colorSamplers.');
        return;
    // last check for at least two layers - assume they will be on same level( not in layerSet )
    if(app.activeDocument.layers.length < 2 ){
        alert('This script requires at least two layers.');
        return;
    // create varaibles to hold the colorSampler's color property for each layer
    // for the bottom layer
    var outputArray = new Array();
    // for top layer - array could also be created this way
    var inputArray = [];
    // store the number of samples because it will be needed in more than one place
    var numberOfSamples = app.activeDocument.colorSamplers.length;
    // hide the top layer
    app.activeDocument.layers[0].visible = false;
    // collect the samples from the bottom layer
    for(var sampleIndex = 0; sampleIndex < numberOfSamples; sampleIndex++ ){
        outputArray.push(app.activeDocument.colorSamplers[sampleIndex].color);
    // turn the top layer back on
    app.activeDocument.layers[0].visible = true;
    // collect those samples
    for(var sampleIndex = 0; sampleIndex < numberOfSamples; sampleIndex++ ){
        inputArray.push(app.activeDocument.colorSamplers[sampleIndex].color);
    // make sure the top layer is the activeLayer
    app.activeDocument.activeLayer = app.activeDocument.layers[0];
// create arrays of the color values:
var theArray = [[0, 0, 0, 0, 0, 0]];
for (var m = 0; m < inputArray.length; m++) {
theArray.push([inputArray[m].rgb.red, outputArray[m].rgb.red, inputArray[m].rgb.green, outputArray[m].rgb.green, inputArray[m].rgb.blue, outputArray[m].rgb.blue]);
theArray.push([255, 255, 255, 255, 255, 255]);
// sort;
theArray.sort(sortArrayByIndexedItem);
// makeCurveAdjustmentLayer();
rgbCurvesLayer (theArray)
////// make rgb curves layer //////
function rgbCurvesLayer (theArray) {
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc5 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref2 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        ref2.putClass( idAdjL );
    desc5.putReference( idnull, ref2 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc6 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc7 = new ActionDescriptor();
            var idpresetKind = stringIDToTypeID( "presetKind" );
            var idpresetKindType = stringIDToTypeID( "presetKindType" );
            var idpresetKindDefault = stringIDToTypeID( "presetKindDefault" );
            desc7.putEnumerated( idpresetKind, idpresetKindType, idpresetKindDefault );
        var idCrvs = charIDToTypeID( "Crvs" );
        desc6.putObject( idType, idCrvs, desc7 );
    var idAdjL = charIDToTypeID( "AdjL" );
    desc5.putObject( idUsng, idAdjL, desc6 );
executeAction( idMk, desc5, DialogModes.NO );
// =======================================================
var idsetd = charIDToTypeID( "setd" );
    var desc8 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref3.putEnumerated( idAdjL, idOrdn, idTrgt );
    desc8.putReference( idnull, ref3 );
    var idT = charIDToTypeID( "T   " );
        var desc9 = new ActionDescriptor();
        var idpresetKind = stringIDToTypeID( "presetKind" );
        var idpresetKindType = stringIDToTypeID( "presetKindType" );
        var idpresetKindCustom = stringIDToTypeID( "presetKindCustom" );
        desc9.putEnumerated( idpresetKind, idpresetKindType, idpresetKindCustom );
        var idAdjs = charIDToTypeID( "Adjs" );
            var list1 = new ActionList();
                var desc10 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref4 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idRd = charIDToTypeID( "Rd " );
                    ref4.putEnumerated( idChnl, idChnl, idRd );
                desc10.putReference( idChnl, ref4 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list2 = new ActionList();
// add r points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list2, theArray[m], 0)
                desc10.putList( idCrv, list2 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc10 );
                var desc15 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref5 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idGrn = charIDToTypeID( "Grn " );
                    ref5.putEnumerated( idChnl, idChnl, idGrn );
                desc15.putReference( idChnl, ref5 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list3 = new ActionList();
// add g points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list3, theArray[m], 2)
                desc15.putList( idCrv, list3 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc15 );
                var desc20 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref6 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idBl = charIDToTypeID( "Bl " );
                    ref6.putEnumerated( idChnl, idChnl, idBl );
                desc20.putReference( idChnl, ref6 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list4 = new ActionList();
// add b points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list4, theArray[m], 4)
                desc20.putList( idCrv, list4 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc20 );
        desc9.putList( idAdjs, list1 );
    var idCrvs = charIDToTypeID( "Crvs" );
    desc8.putObject( idT, idCrvs, desc9 );
executeAction( idsetd, desc8, DialogModes.NO );
return app.activeDocument.activeLayer;
////// add curve point //////
function addCurvePoint (theList, valueHor, theNumber) {
var desc11 = new ActionDescriptor();
var idHrzn = charIDToTypeID( "Hrzn" );
desc11.putDouble( idHrzn, valueHor[theNumber] );
var idVrtc = charIDToTypeID( "Vrtc" );
desc11.putDouble( idVrtc, valueHor[theNumber+1] );
var idPnt = charIDToTypeID( "Pnt " );
theList.putObject( idPnt, desc11 );
////// sort a double array, thanks to sam, http://www.rhinocerus.net/forum/lang-javascript/ //////
function sortArrayByIndexedItem(a,b) {
var theIndex = 0;
if (a[theIndex]<b[theIndex]) return -1;
if (a[theIndex]>b[theIndex]) return 1;
return 0;

Changing skin tones with adjustment layer fails

Hi,
I am running PS CC 2014 and all I want to do is to adjust a skin tone to match it to the rest of the bodys skin color.
I have watched some videos on YouTube but my PS doesnt seem to work that way and I wonder why.
My workflow:
Copy background layer.
Quick select area of body where skin tone has to be changed
(If necessary: improve selection)
Now create adjustment layer with gradiation curve
Select with double click midtone pipette and select one point of the "good skin tone" (also pressing CTRL at the same time when selecting it)
Confirm with OK.
Reject box which wants to take over skin tone as standard color.
Click with pipette in the previously selected skin area which has to be changed.
Instead of adjusting the color into a good skin color, this area turns into a strange orange color.
All I can do now is to walk through the single RGB channels to makle adjustments and hope to get anywhere
near the expected result.
Where have I gone wrong ? Where does the orange color come from ?
Any proposals how to get to a reasonable result ?
Preferably with this workflow. But all other ideas are welcome, too.
Thx.
Arnold.

For what it's worth: I have found that when sculptural modeling is involved, such as the in the hand, working with Curves in LAB (where tone is discrete from color) produces the color change more naturally and provides greater control over local contrast. You may want to consider that alternate approach. In this sample, the left forearm provided the reference color and I chose to lighten the tonal scale a bit.
One off-topic comment: A shorter than normal focal length lens creates a foreshortening that makes near objects disproportionately large in relation to the rest of the object or scene. In this instance, consider its effect on the hand-head sizes. I would suggest that a focal length at least 1 1/2 times normal would be more appropriate.
Good luck.

Adjustement layer on one layer

Similar Messages

Maybe you are looking for