Adjustment brush sliders missing in LR4 when trying to manipulate masks originally created in LR3

I am trying to re-edit some of my birding photos (CR2 raw images).  I have difficult masks that were created in LR3 and took alot of time due to feathers on a complicated background.  I do not want to have to re-mask everything in LR4.  When I have imported my files to LR4 the original LR3 mask is still present.  However, the sliders for Temp, Tint, Hightlights, Shadows, Saturation, Noise, Moire and Defringe are missing.  I want to do localized noise control to keep feather sharpness so I need the Noise slider.
Am I missing something?  If I work on a photo that had no LR3 mask all sliders are available.  If a mask from LR3 exists I am missing sliders.
See image below for a screenshot of the differences between the 2 panels.
http://imgur.com/emksL3b
Andrew

Images processed in Lightroom 3 will still display process 2010 settings.  If you go to the calibration section of the right hand panel, you can switch to the new process version.  But it will probably make changes to your images.  So try it on one and see if the changes are acceptable.  I only change the images that I worked on in Lightroom 3 on an individual basis when I decide I want to try to improve them.

Similar Messages

  • Safari keeps saying missing plug in when trying to veiw video where do i get pluh in, safari keeps saying missing plug in when trying to veiw video where do i get pluh in

    safari keeps saying missing plug in when trying to watch video where do i get plug in im using 10.6.8 2.4 ghz intel core 2 duo

    That is all it says I went to watch the video on the iPhone 5 clicked on video and the video player box came missing plug in came up and the little black circle just kept spinning and that's it it works fine on google chrome Thanks in advance for help

  • Missing File error when trying to install HP 5610xi using Windows 7 64 bit download

    I have tried several times to download and install the software and drivers for my old 5610xi on my new computer running Windows 7 Home Premium 64-bit OS. I keep getting a "missing file" message when trying to run the download, and it will not install. Can someone please help!?!?

    Hi computeir, sorry to hear that you are having issues with getting your printer installed on to your computer. If you are connecting the printer to the computer with a usb cable, please remove it from the printer and the computer and set it aside. Please click the link I have provided for the HP Printer Install Wizard for Windows.
    The installation will prompt you as to when to connect the usb cable. If you are still having issues, please feel free to write back.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I keep getting "missing plug-ins" when trying to open applications on websites - what is/are these?

    I keep getting "missing plug-ins" when trying to open websites applications - what is/are these? I have downloaded Adobe flashplayer and was advised to, but still showing up with this message?

    could also be java plugin or any plugin used on a website that you havent installed
    I would try to right click the place that say missing plugin to see if it provide some sort of info as to what plugin it is under the impression is missing

  • Adjustment brush sliders not working

    In the develop module, the adjustment brush sliders seem to have no affect on the area brushed.  Did I do something to change that or is there a fix for it.

    Check the position of the Flow and Density sliders, at the bottom of the panel, you may have set them accidentally to zero
    HTH

  • "NTLDR is missing" error message when trying to boot R&R Recovery from USB HDD? !

    Does anyone know what/why I am getting a "NTLDR is missing" error message when trying to boot from USB HDD?  I copied my backup to a USB HDD and made it bootable via R&R but I am still getting this error.  Help!
    I have a T61 if that helps any.
    Brad
    Brad R
    T61 4GB RAM Intel T8300

    the master boot record (MBR) needs to be repaired for that to work.
    what OS are you using?
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • CC Bridge slow-.  adjustment brushes not showing size, adjustments when done blind are slow to react

    I am running Imac 2.7 GHz    16 gb ram    600 gb hard drive available
    adjustment brushes not showing size, adjustments when done blind are slow to react.

    Bridge is far more than a file browser.   Bridge does what lightroom does.
    When working with Raw  files, there are tools,   **adjustment brushes** that allow you to dodge and burn raw files.
    These brushes are size adjustable and now with CC, I can not see the size of the tool I am using.
    So you might want to look at Bridge differently, as it is a very powerful tool.
    Anyone else have a similar experience with CC version of Bridge?

  • Local Adjustment Brush Sliders Are Gone

    I did a reinstall, repair actually of LR 2.6 due to blue screen errors (which turned out not to be LR related) and now my local adjustment brush sliders are gone! I've got the old style, one slider with the other controls being + & - buttons. I've got no clue what else is gone but I would like my sliders back.
    What happened? LR says it's the most current version.

    Jim,
    In the upper right corner of the brush panel is a little whte buttton. It is on the same line as "adjustment:".
    Click that button to reveal your sliders
    Rich

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • PS CC 14.2 Mavericks shows bug message, when trying to manipulate mesh templates

    Bug message (program error) when trying to manipulate a mesh template (Ball, Winebottle, cube etc) in 3D

    Is this a plugin you are developing or one you have purchased?
    If purchased, I would try to contact the company that made it.
    If you are developing, then I would get the original Dissolve (or other) example and make sure it is working correctly with the OK and in the Cancel scenario. If so, then copy that example and start modifying and working your way towards what you now have. You should be able to tell when things go wrong and that would help me figure out your crasher.

  • Adjustment Brush sliders

    When I use the Adjustment Brush in LR4, none of the sliders move smooth.  Plus I constantly get the spinning beach ball.

    Hi Jack
    I am haveing the same problem thought I would find an answer, mabe tomarrow?

  • Adjustment Brush is painting bright red when it is set with saturation at -100

    Anyone have any idea why it is not removing the color like I am asking to program to do?

    So it turns out that the exposure was also turne down to -4 and I missed this.  Sometimes the answer is right in front of your face but I had
    double clicked effect numerous times but somehow this was part of the problem.
    I think inially I had the Brush overlay on (which I never use) and then after about an hour of fiddling around I posted the question.
    You hit the nail on the head with the Overlay but then when I must have reacctivated the adjustment brush I must have some home
    turned the exposure down to -4 and thus when I turned off the overly it was coming up as black.
    thank you for all of your help.  I have used LR since 2005 and this really rattled my cage.
    Cheers

  • "Missing Operating System" when trying to boot from USB

    I have a macbook air (3,2), and I'm trying to install Arch onto the partition that currently has Ubuntu. I have tried a few different ways to get the Arch core iso onto the usb key drive, but no matter what I do, I am ending up with the message "Missing Operating System" when I boot into it.
    I started out using the instructions from https://wiki.archlinux.org/index.php/US … tion_Media for writing it on OSX, using diskutil unMount, then the dd with bs=8192, and of=/dev/disk2
    When that didn't work, I tried booting into my ubuntu install, and used just a plain
    sudo dd if=archlinux.iso of=/dev/sdb
    Still no luck, so then I went to my old standby of unetbootin, which didn't do any better. I just tried yet again with the dd in ubuntu, and I'm still not having any luck. 
    Here's some of the relevant info I could find:
    $ sudo dd if=Downloads/archlinux-2011.08.19-core-x86_64.iso of=/dev/sdb
    772096+0 records in
    772096+0 records out
    395313152 bytes (395 MB) copied, 1.55667 s, 254 MB/s
    $ sudo fdisk -l /dev/sdb
    Disk /dev/sdb: 8065 MB, 8065646080 bytes
    64 heads, 32 sectors/track, 7691 cylinders, total 15753215 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x3946b2c9
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1   *           0      772095      386048   17  Hidden HPFS/NTFS
    One interesting thing I noticed was that the dd took about 10 minutes in mac osx, and under 2 seconds in linux.  That seemed like a pretty big difference between the two systems, but I'm not sure if that's related to the batch size on the write, or to the implementation of dd used in OSX.
    Is there something obvious I'm missing?  I know the computer is able to boot from this key drive because I was able to boot an Ubuntu livecd from it just a few days ago.  Unfortunately, the MBA won't boot from my external cd/dvd drive because it's not the apple brand super-drive, and I don't want to spend the money for a super-drive, so a cd-based install isn't an option.
    Really looking forward to playing with Arch, because some of my friends recommended it to me highly. I'm a former gentooer (years ago) who became fed-up with installing *everything* from source. I can't stand ubuntu doing everything for me, and debian always seemed so far behind the curve on everything, so Arch seems like the perfect OS if I can just get into the installer. :)
    Thanks so much!
    ~Maquis

    Oh, forgot to mention, I did the dd from ubuntu with both bs=4M and without a bs argument. the version without the bs argument is the one that went really fast. 
    Neither version would boot, so I don't think that the way I'm writing it is the problem.
    I did just notice that if I just do a sudo fdisk -l without specifying the drive, I have 2 entries for my drive:
    Disk /dev/sdb: 8065 MB, 8065646080 bytes
    64 heads, 32 sectors/track, 7691 cylinders, total 15753215 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x3946b2c9
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1   *           0      772095      386048   17  Hidden HPFS/NTFS
    Disk /dev/sdb1: 395 MB, 395313152 bytes
    64 heads, 32 sectors/track, 377 cylinders, total 772096 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x3946b2c9
         Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1p1   *           0      772095      386048   17  Hidden HPFS/NTFS

  • TS3276 why do I get 'missing plug in' when trying to forward emails with photos

    Why do I get 'missing plug in' when I am trying to forward emails with photos in. I am using Mountain Lion and the latest version of Java.

    What application are you using?
    Try un-installing and then re-installing.
    Adobe Flash Uninstaller
    Adobe Flash Player

  • Exception when trying to manipulate Data in an ADAM server

    Hi all,
    I'm having problems with trying to manipulate data in the ADAM instance on my machine. Currently I can bind to the ADAM instance (took me a while to figure out that ADAM isn't like other normal LDAP servers... you need to bind as a user which is a member of the Administrators group. So currently my url is ldap://localhost:389/O=Microsoft,C=US, user is cn=Mary,cn=Roles,o=Microsoft,c=US for example), but using java code all I can do is search for data and retrieve the results. However when it comes to modifying, adding and the like I keep getting a NameNotFoundException:
    org.springframework.ldap.NameNotFoundException: [LDAP: error code 32 - 0000208D: NameErr: DSID-031001D2, problem 2001 (NO_OBJECT), data 0, best match of:
         'O=Microsoft,C=US'
    What is wrong? Why can I do searches but not anything else? Since this looks like a permissions issue with ADAM I haven't included any of my source code. Also this org.springframework.ldapNameNotFoundException is the same as JNDI NameNotFoundException, so even if you don't know anything about spring framework this isn't a cause for concern.
    Thanks.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    I am having problem retrieving the users from the AD, can anyone help me with this with an example plz!

Maybe you are looking for