Admin panel linkstation not accessible

hi,
I have a brandnew NAS Buffalo Linkstation LS 220D,
and I cannot use the admin panel from within Firefox. IE works fine, as does Safari on iPad.
When connecting to the admin panel I get an error that my account is restricted and when trying to login it won't accept my credentials.
This is the case on all my windows computers, desktops and laptops alike. So I'm assuming whatever is blocking this is a synched feature.
Or Is there a preset security feature that might have to do with it?
Any ideas greatly appreciated!
FF and NAS firmware are up to date.

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Similar Messages

  • Admin console is not accessible even when the Admin server is running

    Running Weblogic 10.3.2 on RHEL 5.x and EM -11.0.1.0
    Found the following errors in the server logs
    <May 26, 2010 1:59:35 PM PDT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'FMW Welcome Page Application [Version=11.1.0.0.0]'.
    java.lang.IllegalArgumentException: URI is not hierarchical
    at java.io.File.<init>(File.java:363)
    at oracle.as.jmx.framework.util.MBeansXmlServletContextListenerSupport.getRelativePathsToMBeansXmlFiles(MBeansXmlServletContextListenerSupport.jav
    There is a deployment problem with the welcome page.
    Could not access the admin console.
    Reinstalled everything but getting the same error
    Thanks in Advance
    Anurag

    yes solved.......there was firewall enabled which was not allowing the https traffic to flow.
    Firewall disabled and the admin console was accessible.
    Thanks!!

  • Buffalo Linkstation not accessible in Mavericks

    Hello All,
    I have recently purchased a Buffalo Linkstation Pro Duo model no. LS-WX4.0TL/R1 for an IT client of mine that needs to backup both PC and Mac computers.
    When I go to map to the NAS via AFP I receive an error that the particular location is not available, or cannot be accessed.
    This is peculiar because I have used this particular NAS in other Mac environments running Lion with no issues.
    Has Apple restructured AFP in Mavericks?
    Also, I have logged into the NAS user interface and checked for Firmware updates. The NAS reports that it is running the latest firmware.
    I have posted this same question on the Buffalo support forums. They said to update firmware, and then to contact Apple Support if there are further issues.
    Does anyone have any insight to this issue? Be it regarding AFP in Mavericks, or firmware for the NAS?
    Any help is much appreciated. Thanks so much!

    Hi,
    I'm having the same problem with a linkstation quad I purchased yesterday - works fine over SMB but cannot access via AFP.
    Running mountain lion and mavericks and same problem in both, have already upgraded to latest firmware.
    Dan

  • WebLogicServer server is in RUNNING but Weblogic Admin console is not accessible.

    All,
    My WebLogicServer server is in RUNNING state but I am not able to login to th Weblogic admin console. admin console port comes in CLOSE_WAIT state.
    Admin console Page does not get loaded. when I tried to netstat -an | grep 7003 find port in CLOSE_WAIT state.
    172.16.1.180.7003 172.16.1.180.62206 139264 0 130880 0 CLOSE_WAIT
    172.16.1.180.7003 172.16.1.180.53183 139264 0 130880 0 CLOSE_WAIT
    172.16.1.180.7003 172.16.1.180.39834 139264 0 130880 0 CLOSE_WAIT
    <Oct 24, 2013 11:56:00 AM AST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OAM_domain" running in Development Mode>
    <Oct 24, 2013 11:56:00 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Oct 24, 2013 11:56:00 AM AST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    Also, there are no errors getting log in log files.
    Regards,
    Ram

    The Admin console is an app internal to Weblogic, the possible cause for the CLOSE_WAIT could be that, the port was closed by server but not by the internal web app.
    so it is hung in CLOSE_WAIT state. You might want to restart the servers so that the ports are cleared.
    Try restarting the admin server and check the state of the port 7003 and see if you can access Admin console fine.
    Hope this helps

  • SOA Suite 11g on WLS: Admin console EM not accessible

    Hello everybody,
    I am trying to install and run a sample SOA composite using SOASuite11g. Here are steps i followed-
    1> Created schemas using RCU
    2> Installed using JDeveloper11.1.1. 1.0.exe, which has installed Weblogic server and Jdeveloper.
    3> Created a WLS domain (only admin server, no managed server and machines) and targeted al avalilable soa_suite components to the admin server.
    4> Installed SOA Composite Editor (using Find Patches and Upgrade option in JDeveloper)
    5> createed a basic soa composite project in jdeveloper and deployed that to the soa server.
    6> if i go to http://localhost:port/soa_infra, the project is shown depolyed.
    However, I am not getting any app under http://localhost:port/em or http://localhost:port/BPELConsole
    If I login to the weblogic console http://localhost:port/console, under deployed applications there seems to be no such app.
    Is it a problem with the version i have installed that even though it installs weblogic domain with soa_infra components, it does not supply the enterprise manager component.
    Is there a way i can test the deployed compoiste?
    Thank a lot in advance. Regards.
    sibendu

    Hi,
    There is no BPELConsole in 11g. You can test your composites from EM, if you have selected EM during domain creation. If you haven't, then extend your domain with EM.
    To extend the domain with EM, stop your servers in domain. Invoke the config. Select extend option. Select the EM template.
    EM will be available in http://host:port/em
    You can alternatively test your composites if you know the composite WSDL. You can use SOAP UI or any SOAP testing tools.
    Usually it will be something like
    http://host:port/soa-infra/services/default/TaskFormVerifyComposite!51.0/client?WSDL
    In the above wsdl, till default it will be same for all the composite, followed by composite name, a ! symbol, followed by revision and then your exposed service. If you omit the revision, then the default revision will be invoked.
    Hope this helps..!!!

  • Website Admin Panel not working

    Hello,
    I created a site on Microsoft Azure (Wordpress site). It was working fine. But today the admin panel is not opening. I didn't do anything to the site. Link to the site is
    http://abdul-rehman.azurewebsites.net and the link to the admin panel is
    http://abdul-rehman.azurewebsites.net/wp-admin . Please tell what to do?

    Hi Abdul,
    The following reasons could be the reason why the issue occurs:
    1. Database information in wp-config.php file may be incorrect
    2. Check if both the front end and back end of your WordPress site are returning the different errors
    3. wp-config.php file may be corrupted
    4. If this error occurs intermittently when your site is on high user load
    5. Check if your Website Service is able to connect to the database
    See
    How to Fix the Error Establishing a Database Connection in WordPress
    here
    Regards,
    Shirisha Paderu

  • Admin Console should not be accessible from the Internet

    Hi!
    I am using WebLogic 6.1 and by default the Admin Console runs under the same port
    like the deployed web applications. As a matter of fact, the Admin Console can
    been seen from the Internet! :(
    Is there a way to start the Admin Console with another port? Or is there any other
    solution that the Admin Console is only accessible from the Intranet but not from
    the Internet??
    I couldn't find anything in the documentation related to this topic.
    Thanks in advance.
    Markus Richter

    One solution I use is to place an Apache WebServer in front of the BEA HTTP server and use the Apache/WebLogic module to proxy requests.
    Apache is much more configurable, robust etc etc as a webserver. If you configure a specific Apache Virtual Server for connections to your Weblogic server you can use Apache ACL's to control access to the console via specific IP addresses only.
    The ACL in the Apache Virtual Server configuration could like something like this.
    <Location /console/>
    order deny,allow
    deny from all
    allow from 10.0.0.1
    </Location>
    hope this helps.
    Mark P

  • SEO Metadata options not display in admin panel issue.

    SEO Metadata options not display in admin panel issue.

    Hi there,
    Not much information or detail there.
    If the New meta option on pages is what you are refering to then the site in question is likely not been upgraded to that beta feature. Only partners who have access to beta options under settings can access that to upgrade.

  • Why site database server for Central Admin site not accessible?

    Hello everyone,
    I've this issue where; when connecting a primary site to existing central administration site; setup prerequisite checker 
    continue to notify it cannot establish connection to SQL server having central administration site database. The SQL server 
    having central site database is installed locally on the server central administration site is hosted on. Both servers 
    (central administration site server, the new server to host child primary site required to join that central administration 
    site) having following configuration:
    A. Central Administration site server, with site database server installed locally: 
    Name:             HQCAS
    OS:                WS 2008 R2 SP1, fully patched.
    SQL Server:     SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
    SQL Server named instance: CASDB
    Local firewall ports opened: 1433, 4022  (via inbound rules created in group policy, same GPO applies to primary site 
    server)
    SQL Server broker service Enabled: True.
    TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs. 
    IP Address: 10.1.1.250/8
    Local SAM:      Both server computer accounts added to local 'Administrators' group on both servers.
    Domain service account: svcCASDB
    SPNs registered:        2x, one for HQCAS hostname on instance CASDB on port 1433, second for FQDN for HQCAS on instance 
    CASDB on port 1433.
    SQL Server Logins:   Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL 
    server role assigned.
    SQL Server browser service running.
    B. Primary site server, with SQL server installed locally: to join HQCAS CM2012 hierarchy:
    Name:             STPRS
    OS:        WS 2008 R2 SP1, fully patched.
    SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
    SQL Server named instance: CM12PRIMARY
    Local firewall ports opened: 1433, 4022  (via inbound rules created in group policy, same GPO applies to central 
    administration site server)
    SQL Server broker service Enabled: True.
    TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs. 
    IP Address: 172.168.1.250/16
    Local SAM:      Both server computer accounts added to local 'Administrators' group on both servers.
    Domain service account: svcCASDB
    SPNs registered:        2x, one for STPRS hostname on instance CM12PRIMARY on port 1433, second for FQDN for STPRS on 
    instance CM12PRIMARY on port 1433.
    SQL Server Logins:   Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL 
    server role assigned.
    SQL Server browser service running.
    Tests performed:
    Telnet to/from both HQCAS/STPRS on ports 1433, 4022 establishes connection. Please help
     

    Hello friends,
    My finding it finally is....there wasn't any configuration issue as I mentioned above.
    I'm using an evaluation edition of SQL Server 2008 R2; it just allows default instance (MSSQLSERVER) to be used, not a named instance. 
    The confirming test for this was...I re-installed SQL Server with all the same settings except changing from a named instance to default; once I finished applying service pack 3. I could initiate WSUS 3.0 SP2 x64 setup and point it to use this SQL server.
    WSUS setup completed without any errors. This was not happening when named instance was all configured properly. It was just not accessible from outside.
    Well this is what my finding is. For lab environment of CM2012 it suffices the need.
    Regards,
    Shahzad.

  • How to DHCP Server with NO ROUTER on Server Admin panel field?

    Hi all!
    I'm having a little problem.
    I have two completely different networks, with different purposes, one is 10.0.10.X and the other is 192.168.10.X. My networks is like this:
    Internet------Wifi Router (192.168.10.250) -----iMacs AirPoirt (192.168.10.X)
    MacPro (10.0.10.100)-----iMacs Ethernet (10.0.10.X)
    Great, is so simple. So I had a DHCP server (Windows blerg) on the 10.0.10.X (NOT MAC OS X SERVER) and everything works perfect, since on the Windows DHCP Server I'm not forced to fill the router/gateway and leaving it blank makes the iMacs have just one router/gateway from the 192.168.10.X lease from the Wifi Router.
    Now I'm planning to migrate the DHCP Service to the Mac OS X Server (Snow Leopard Server), I fiddled a bit and found that I can't use DHCP Server on Mac OS Server leaving router field blank and if I type ANYTHING, my iMacs will NOT access the internet through 192.162.10.X since now there's two gateways (from 10.0.10.X that Server Admin panel forced me to fill and from 192.168.10.X that HAS to have one gateway and it's the correct one).
    I've tried to fill with the 192.168.10.X gateway but throws a warning saying that is not on the same subnet.
    I really don't want to re-route or mix the traffic for many reasons.
    So I ask, is there any possible way to NOT fill or bypass or do anything to make DHCP Server service from Mac OS X Server not have a gateway/router?
    The only way I'm managing to do it now is to use manually entered IPs on the iMacs, but it's 10 iMacs and I guess for some services like netboot etc I need DHCP.
    Cheers,

    Lets assume that before you had computers with both Ethernet and WiFi connections, they were able to access the Internet via WiFi and talk amongst themselves via Ethernet. The Ethernet addresses were not (in theory) accessible from the WiFi network and hence not accessible from the Internet. Presumably you intended this for security reasons.
    If so, you were completely mistaken. Even if you turned on a Software firewall on each of these iMacs to in theory block traffic going between the two networks you still have a potentially insecure setup. This is because traffic can reach the iMacs via WiFi. Once hypothetical malicious traffic has invaded an iMac via WiFi it can take control over the computer and within that computer reach out via its Ethernet port to other Ethernet computers.
    The only way to ensure complete security is not to have any link between the two networks at all. If one of the computers is linked to both then you have a potential path for attacks to travel across.
    So what are you really trying to do? If you want two totally separate networks with one having absolutely no link to the outside world then this is simple and is as follows.
    NETWORK1 Internet------Wifi Router (192.168.10.250) -----iMacs AirPoirt (192.168.10.X)
    NETWORK2 MacPro (10.0.10.100)-----different iMacs Ethernet (10.0.10.X) with WiFi turned off
    You could define the default gateway for NETWORK2 as being the DHCP server itself. No computer on NETWORK2 would be able to access the Internet and hence it would be totally secure.
    If however you want all computers to be able to access the Internet then you need a link between them. Are you merely wanting to segregate WiFi traffic as it might be insecure and evesdropped on? If so then the following is a better approach
                             WiFi clients (192.168.10.x)
    Internet ----- AirPort Extreme (192.168.10.250) ------ Hardware FireWall does NAT (10.0.10.1) ---- MacPro (10.0.10.100) ---- iMacs via Ethernet (10.0.10.x)
    The WiFi clients would not be able to directly access your 10.0.10.x network as they are blocked by the FireWall. However if you have say a Laptop that you want ot use on WiFi but still access your server on your internal secure LAN you would do this by having the server run the VPN server component. The WiFi client would then connect via the VPN server and this would ensure all the network traffic going over the WiFi is encrypted using industry standard IPSec encryption. In this second scenario the MacPro (presumably your server) would have the FireWall as the default gateway, and the FireWall would have the Internet router as its default gateway. You could set the Firewall to forward VPN traffic to the server or use the second Ethernet port on the server to accept VPN traffic on the 192.168.10.x LAN.
    This is my own setup is something like
                            AirPort
                               |
    Internet router --- Public IP range --- (WAN) FireWall (LAN) --- LAN Switch --- Server Port1 for normal traffic
                                                     |(DMZ)                                    |
                                                     +----------------------------- Server Port2 for VPN

  • An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

    I'm trying to load sharepoint script from *.cmd file. 
    I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
    My cmd file is: 
    Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    My sharepoint file 1.ps1 is:
    $snapin="Microsoft.SharePoint.PowerShell"
    if ($action -eq $null -or $action -eq '')
    {<br />
    # Action by default is complete uninstallation.
    $action='uninstall'
    $uninstall = $true
    else
    $action = $action.ToLower()
    switch($action)
    { $_ -eq "uninstall" } { $uninstall = $true; break }
    { $_ -eq "removesolution" } { $removeSolution = $true; break }
    { $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
    { $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
    default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
    Check the Sharepoint snapin availability.
    if (Get-PSSnapin $snapin -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is loaded."
    elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is registered."
    Add-PSSnapin $snapin
    Write-Host "PS snapin $snapin is loaded."
    else
    Write-Host -f Red "Error: PS snapin $snapin is not found."
    Exit -1
    $url = "http://pc1/sites/GroupWork/"
    $site= new-Object Microsoft.SharePoint.SPSite($url )
    $loc= [System.Int32]::Parse(1033)
    $templates= $site.GetWebTemplates($loc)
    foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
    $site.Dispose()
    The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
    PS C:\2> .\1.ps1 
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    GLOBAL#0 Global template
    STS#0 Team Site
    STS#1 Blank Site
    STS#2 Document Workspace
    MPS#0 Basic Meeting Workspace
    MPS#1 Blank Meeting Workspace
    MPS#2 Decision Meeting Workspace
    MPS#3 Social Meeting Workspace
    MPS#4 Multipage Meeting Workspace
    CENTRALADMIN#0 Central Admin Site
    WIKI#0 Wiki Site
    BLOG#0 Blog
    SGS#0 Group Work Site
    TENANTADMIN#0 Tenant Admin Site
    {248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
    {95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
    {7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
    PS C:\2>
    I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
    i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
    the cmd file but without success.
    My PowerShell has version 2.0: 
    PS C:\2> $psversiontable
    Name Value
    CLRVersion 2.0.50727.5477
    BuildVersion 6.1.7601.17514
    PSVersion 2.0
    WSManStackVersion 2.0
    PSCompatibleVersions {1.0, 2.0}
    SerializationVersion 1.1.0.1
    PSRemotingProtocolVersion 2.1
    After launching the script from 1.cmd file i get an errors:
    C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    PS snapin Microsoft.SharePoint.PowerShell is registered.
    The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
    tered.
    Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
    ration.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
    No xml configuration files loaded.
    Unable to register core product cmdlets.
    Could not read the Types files in the folder CONFIG\PowerShell\types.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
    "No Types files Found."
    Could not read the Format file in the folder CONFIG\PowerShell\format.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
    No Format files Found.
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
    on at http://Pc1/sites/GroupWork/ could not be found. Verify t
    hat you have typed the URL correctly. If the URL should be serving existing con
    tent, the system administrator may need to add a new request URL mapping to the
    intended application."
    At C:\2\1.ps1:48 char:18
    + $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
    + CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
    tionException
    + FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
    Shell.Commands.NewObjectCommand
    Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

    I have an answer for my problem:  for solving a problem I've made several steps:
    1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
    This user has been added as farm administrator in the wizard.
    This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
    2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
    the Management Shell of Sharepoint.
    3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
    (my main account) in the Config database
    4. Run CMD file only from Start->Run menu. 
    runas /user:Domain1\UserAccount1 "C:\1.cmd".
    Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
    Thanks all for help.

  • Site not accessible from the Load balanced web front end server - sharepoint 2010

    I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
    2 WFE's are load balanced using hardware load balancer.
    An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
    A web application is created on the WFE's on port 80.
    alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
    Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
    Result: The site is accessible from outside the server and works fine.
    ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
    When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
    Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet. 
    Regards,
    Mudassar
    MADDY-DEV Forum answers from Microsoft Forum

    Loop back check.
    http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

  • Files not accessible from local view

    Hello,
    I recently got a new computer (iMac 11,3) and transferred all files from a backup drive. Since then, the local view in Dreamweaver's file panel does not display the files in my local root folder. The files are visible and accessible from the desktop. I can open them in Dreamweaver by dragging them onto the Dreamweaver icon, but I can't put them to the remote server (get and put commands are grayed out). I've edited the site settings, and defined a new site with a new local root folder, but still have the same problem. I'm using DW cs3. The old computer was an iMac G5, with a non-Intel processor. I hope that's not the problem.
    Thanks!

    Local:
    Site name: Neal homepage
    local root folder: Sesostris:Users:nskorpen:Documents:Neal homepage:
    Default image folder: (blank)
    Links relative to : Document
    HTTP address: http://www.nealskorpen.com/
    case sensitive links: off
    cache: disabled
    Remote:
    Access: FTP
    FTP host: www.nealskorpen.com
    Host directory: /public_html/
    login and password: I'm not going to list these here. I tested the
    connection and they worked.
    Use passive FTP: disabled
    Use IPv6 transfer mode: disabled
    use firewall: disabled
    use SFTP: disabled
    Maintain synchronization information: enabled
    Automatically upload files to server on save: disabled
    check in/out: disabled

  • Firmware-upgrade failed router not accessible

    during firmware-upgrade the connection to E4200 got lost due to power-outage, now the E4200 router is not accessible, power-led flashes ...
    the factory-ip-address 192.168.1.1 responds on ping, but nothing else ...
    how to get a working environment back?

    Once reset the router. Steps to reset the router:
    Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
    Once the light gets stabilize on the router perform the following steps:
    #  Open up the browser and on the address bar type 192.168.1.1, it will prompt for the username and password. Provide the username as 'admin' and password as 'admin' or 'password'. Then it will open up the Router setup page.
    # Then click on status and check the firmware version. If its not updated then upgrade the firmware once again.
    # Then after firmware upgrade  reset the router again as explained above.
    Then uninstall the existing Cisco connect software from the computer. After uninstallation then configure the router again using Cisco Connect CD as you did earlier.

  • HD Not Accessible to Repair Permissions

    Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
    It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
    When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
    I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
    Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
    Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
    However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
    It appears my /Library/Receipts folder is empty.
    What’s more, if I try to run an admin command in Terminal, like
    sudo diskutil repairPermissions /
    I get the message:
    -bash: sudo: command not found
    In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
    When I type:
    Users
    I get
    Users: command not found.
    So I typed:
    Echo $PATH
    And get
    /bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
    I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
    Any and all help is appreciated. Thank you.

    Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
    1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
    2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
    3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
    4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
    If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
    Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
    Gee, I used to love my Mac ...

Maybe you are looking for