Adobe Flex cutting off decimals?

Hi, I have an Flex web application where I stream data into
to DataGrids with the HTTPService via XML from a database. I am
running into the problem of numbers such as 10.00 10.90 are being
displayed as 10 or 10.9, so its dropping all the unnecessary 0's
There are alot of functions to fix this, but I also need this
DataColumn to be able to display data formatted like 1:00.00 or
30:02.32. All the functions I have found do not let those stay in
their proper format.
I've been racking my brain for a while on this and tried many
solutions, but none havent worked right and I'm hoping someone has
an answer otherwise I guess I'll have to scrap the application.
Display raw data directly to the application would work too. I have
attached some code. Thanks for any help!

"CodeFlash05" <[email protected]> wrote in
message
news:gmtl0r$stm$[email protected]..
> Hi, I have an Flex web application where I stream data
into to DataGrids
> with
> the HTTPService via XML from a database. I am running
into the problem of
> numbers such as 10.00 10.90 are being displayed as 10 or
10.9, so its
> dropping
> all the unnecessary 0's
>
> There are alot of functions to fix this, but I also need
this DataColumn
> to be
> able to display data formatted like 1:00.00 or 30:02.32.
All the functions
> I
> have found do not let those stay in their proper format.
>
> I've been racking my brain for a while on this and tried
many solutions,
> but
> none havent worked right and I'm hoping someone has an
answer otherwise I
> guess
> I'll have to scrap the application. Display raw data
directly to the
> application would work too. I have attached some code.
Thanks for any
> help!
Set your resultFormat to e4x

Similar Messages

Exporting to PNG from Adobe Illustrator cutting off edges

I created a 40px x 40px image in Adobe Illustrator CS4. I saved as an .ai file and then tried to export as a PNG.
Adobe Illustrator automatically crops the background and tightens the export to a rect around all the objects which if fine. In this case, I am not working edge to edge so my image is not quite 40px wide.
But, unfortunately, Illustrator is not exporting the entire image. I end up with an image that is 34px wide. Indeed, the icon I draw starts on the left hand side but the right edge of my object cut off.
Any ideas why this is happening? I can't imagine Illustrator CS4 can't correctly to export to PNG.

Can't necessarily explain the reason for the cutoff without knowing more, but you might be able to solve it by adding a 40 x 40 square with no fill or stroke and including it in the export.

Has Adobe/Sys cut off 20% of its most affluent market with Flash Ver10.3?

System - PC - Vista - Internet Explorer 8
US Census Data -21.05 % of the population is 55. The median maximum income occurs at age 57. The median maximum wealth occurs at age 65. The writer holds that Version 10.3 is not accessable nor is it safe to use for the majority of video viewers in this age bracket.
Credentials - 1957 CALTECH computer lab Burroughs 110 to 1995 - Member of Select Committee investigating software problems with the Space Station IT system.
3 Examples:
Of the 34 unit owners (approx 50 people) only the writer and one other person have a clue about the difficulties being encountered and the security gotcha involved in upgrading to Version 10.3.
Adobe Installation Instructions. "Installation may require admistrative access to your computer which is normally provided by your IT department." Around here that's me. I just quit.
10.3 requires operation outside the Protected Mode. That's a non starter. In order to avoid endless warning messages from Microsoft - MS Malware and Virus Protection has to be turned off. - Besides the vocabulary being out of range to the layman - defeating the PC security barrier to view a video which was viewed yesterday on Ver 9.X is unacceptable from a personal set of security standards.
Give Greybeards a chance to spend their money on your advertisers - Give us Ver 9X (I already looked - It's gone) or a FP Basic. -Don't ask us to operate in an unsecured environment.
PS My personal resolution was that it is unworkable - It has been uninstalled (less than 9 seconds.)
GreybeardIT

Thanks for the reply. It is heartwarming to find it is the nature of forums to try to help others. Thanks again. I refreshed my memory of the archieves by again downloading the now minus one version of the FP. As you pointed out it may not work with many sites. Correct . My judgement based on a limited number of trials on business websites, is that the Latest Ver. 10.3.X includes a block to any attempt to view the video with an earlier version.
I would like to reestablish for readers (hopefully including Adobe) the essence of the original question. Here is the flaw I am witnessing with my neighbors in in Adobe's marketing strategy.:
Adobe inserts ads before videos and in other places in the "viewing experience" and is rewarded by consumer clicks to Adobe ad buyers.
Flashy, colorful ads display more content, appeal to many of the senses. and result in more clicks and therefore more income for Adobe,
The latest version incorporates IT technology to the point that it is exceeding the ability of older consumers to learn or keep up with system administrator level knowledge in order to install and/or safely (think Active X) use the Adobe ad deliivery system. From personal knowledge of the many PC users in this affluent consumer condo community Adobe has cut them off from viewing all videos. In fact, it is at top of the TGIF Happy Hour on the Terrace chat list. Computer problems including warning messages, system lock and slowing to a stop, rank right after the latest organ recital.
It will take time, but I predict that the actual number of consumer clicks on Adobe video ads may decrease, reduce income, and, hopefully begin a rethink about Adobe's disconnect to the (wealthiest) 55-85 age generation
Meantime, I have the knowledge needed to block any traffic from the Adobe Server site unless I have a specific interest in connecting. Adobe Management - Are you listing? Recomend you review the last 100 titles on this Flash Player Forum
Thanks again
Mike

Hyperlinks in word containing spaces are cut off in pdf generation

We are using a mix of MS Word 2003, 2007 and 2010. All are experiencing the same problem when using Adobe products (Abobe Acrobat Pro 9, Adobe X, Adobe Elements) for the generation of a pdf document with respect to hyperlinks.
When we have hyperlinks containing "spaces" they will get cut off in the resulting pdf document.
Examples have formatting like this in Word
http://team.eu.enet/XXX/Master data forms/Master Data Project.xls
When we convert this in Adobe it cuts off the link after encountering the first space, like this
http://team.eu.enet/XXX/Master (on the face of it the whole line looks like the one above, but the hyperlink shown when hovering over it has been cut like shown)
In some cases the spaces are replaced with %20 (IE for example replaces spaces with these characters automatically). For those cases the conversion works just fine, and the whole line is maintained as a hyperlink also in the pdf
http://team.eu.enet/XXX/Master%20data%20forms/Master%20Data%20Project.xls (again, the line does not look like this in the pdf, but the link when hovering over it does)
When we use the Save as function in Word 2007/2010 this replacement is done automatically. the links in the "word generated pdf" are not containing spaces,
Is there any way to get this replacement done automatically when converting hyperlinks from Word to PDF? Repairing the links afterwards (which is possible, I know) is not a viable option when you have many such links in a word file.

Sort answer: Use proper syntax and do not use the "space" character in any URL.
"20" is hex for the space character (which is a "reserved" character in that it may have special meaning).
If used out of context being "reserved" applications have to make something of a guess.
Success is the %20. Sometimes success is not had.
So, again, proper syntax - no "space" character in a URL (use the underscore).
Some references for a starting point.
http://www.w3.org/Addressing/
http://www.ietf.org/rfc/rfc3986.txt
http://en.wikipedia.org/wiki/Percent-encoding
Be well...

I'm using Acrobat Pro 11. When printing an email to PDF most of the time it cuts off the text on the right margin. Setting look OK and I've moved things around on the email, but that doesn't seem to make any difference. Is there an Adobe setting I'm missi

Like I said above, print to Adobe pdf and it wants to cut off the text on the right margin. I can't see to find a setting that changes this. Any ideas??

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

I am paying for CC but when I try to access LR it says I need to use serial number which I don't have have been using PS on same account for a while. Tried adobe support but got cut off. While online with them they said I didn't need serial number

I paid for CC and have been using PS. However, I can't get to LR. It says I need a serial Number. I contacted Adobe and they said that is not the case. Then I got cut off. Any fix?

If you paid for CC-full-suite or CC-Photography-Plan then you should have a CC-licensed version of LR available, but only if you uninstall the serial-number-licensed LR you apparently have, now. At least try that, uninstall LR 5, log out of the CC app using Gear / Preferences / Account / Sign-Out, reboot, log back into the CC app, and see if LR is one of the items listed.

Header and Footer Items in Adobe Muse? Also Menu text being cut off half way.

How can I make the header and footer items load faster in Adobe Muse? I am hosting with Business Catalyst. Everything else loads almost immediatly on my web page, but my Header and Footer graphic- wood grain picture- take almost 10 seconds to load, and almost a minute to load on mobile devices.
As well, my menu's are not loading correctly on other peoples devices. On my lap top everything looks fine, but on other peoples devices the text in my menus is only loading half way? -only shows half the text.
Still working on my site, but to see what I am talking about you can visit the web page I am in the middle of building at www.bkskin.com
Please give me some advice if any of you have some, thank you.
Megan Burnett

Hello,
It seems to be an issue with the Font that you have used.
You have used Bubble-one font and if you check this font in Google Chrome it is cut off and if you check in Firefox, it comes up fine.
Please have a look at this link in Google Chrome and Firefox and you will see the difference : http://www.google.com/fonts/specimen/Bubbler+One
I would suggest you to use some other font in order to fix it.
Regards,
Sachin

Adobe Media Encoder cuts off video layer when the Ultra Key effect is applied

I am working on a Mac (10.8.5) using the latest verison of Premiere Pro CC. I am using Ultra Key to remove the chroma key background from the "talent layer" and adding a "new background layer" behind the talent video layer. When I export directly from Premiere, the sequence exports as expected. However, I have many sequences, and wish to speed up the process using Adobe Media Encoder. When I export the same sequence using Adobe Media Encoder, the top half of the "talent layer" is completly cut off:
The issue has something to do with the Ultra key effect because when I remove the effect from the "talent layer" it exports in tact (with a chroma key background of course). Adobe Media Encoder CC is up to date as well; are there any known bugs with Media Encoder CC and the Ultra Key effect in Premiere Pro?
Thanks!

Excel 2010 to Adobe X Cell Contents Cut Off

Trying to create an Adobe X file from an Excel 2010 workbook. Issue is multiple cells have contents cut off. The entire contents of the cell does not display in the pdf file. Tried using both the Excel built-in Acrobat "Create pdf" method and the Excel "File...", "Print" method with Printer = Adobe pdf. Same results. Thank you.

Increase the margins right and left and resize Columns to Fit then Save as PDF.

Printing in Adobe Reader after exporting from InDesign gets cut-off

I have exported a few documents form InDesign to PDF. When I print the documents, some parts get cut off (top section or bottom section) but there is still room on the paper. I'ts like the printer decides not to print those sections. I am printing on 5x7inch paper and all my documents show their sizes as 5x7inches.

Turns out the issue was with Acrobat.
See resolution here.
http://forums.adobe.com/message/4496809#4496809

Adobe 9.0 - Recognizing Paper Size - Scans cut off early B4 end of PG

Hello,
I am having a problem with Adobe standard 9.0.
We use adobe to scan various important documents.
We have several preset scanning profiles.   One is color and one is black and white, no other settings should be different.
When we scan with the B&W a 8x14 document will get cut off early, for example just after a signature. The resulting scan is neither 8x11 or 8x14 it just seems to be cut off early at a random point. We have tried reseting the preset to default without luck.
When we scan with color..... and the same document that contains no color.....   No problem.
We do not have this problem with another scan program (Kofax).
What is going on?   Updates?
Please help & Thank you for your assistance!
Tony H.

Actually, a quick test today shows neither color nor BW would scan the page to the correct size.
Please help,
Tony.

In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someo

In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someone respond ASAP? Thanks

I have forwarded your request to the support team that should be able to resolve this issue for you quickly. Expect to hear from them shortly.
Andrew

Decimals cut off loading into Essbase via DIM

Have you ever run into the issue of small numbers (9 decimals) getting cut off/rounded when loading into Essbase via DIM? When I try to load rates into my Essbase app via DIM they get cut off at 6 decimals even the though the entire rate is 9. For instance, the rate 0.752615338 coming out of the source gets stored in the target as 0.752615. Also, if a load a text file with the 9 digit rate into my target app via DIM it STILL gets cut off. Therefore, I've isolated the issue to the loading of data into the target. I cannot modify the precision, however, for my target. Any thoughts?

Ha ha! Oy! It's like having bees live in your head. You are correct Russ! iTunes 11.2.1. Thanks. I went to verify the release number and looked right at iTunes and my fingers typed Safari. Funny how that works. Back to work!

Adobe Form Print Problem - Header is cut off without print preview

We are currently experiencing a problem when trying to print Adobe forms. We have created several forms and are experiencing the same issue with all forms. The issue occurs when we are trying to print a form. If we choose a print preview prior to printing, the form looks normal and prints fine. However, if we do a direct print (i.e. no print preview), then the top part of the form is cut off. It's almost like all of that data on the form gets shifted upward, cutting off about 1/2" to an 1" from the top of the form. We have tried printing to different printers and are ending up with the same results each time. We do not experience this issue with SAPScript.
I have searched several threads and haven't been able to find an issue quite like the one we are experiencing.
Has anyone ever exeperienced a problem like this before?
Currently using Adobe LiveCycle Designer 8.1.2 and are on Netweaver 7.00 EhP1.
Thank you for any help.

I am going to go ahead and close this thread as I believe we have found a solution. Sai is correct that there is an issue with the design.
If anyone else runs into this problem, take a look at note 968394 that talks about differences between print preview and printing from spool. When you are in the print preview dialog box, under "Page Scaling," the default is "Shrink to printable area." So if your form went outside the margins, it would shrink to fit giving you the impression that the problem is not with the print preview rather than the form itself.
After moving the header stuff down a bit everything is printing normal both through the spool and via print preview.
Thank you!

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

3.2 you can make multiple clocks, each clock can have a different alarm.

Adobe Flex cutting off decimals?

Similar Messages

Maybe you are looking for