Adobe fonts not accessible in Word 2011, Word 2016 for MAC

Adobe fonts don't appear correctly in new Word 2016 for Mac (and there are problems with Word 2011, too). For example, I have Adobe Garamond Regular, Bold, Italic, and BoldItalic installed (I had uninstalled Semibold and SemiboldItalic because I wanted the "Bold" to appear as Bold and not Semibold when selecting "Bold" in Word). But in Word 2016, when selecting Adobe Garamond, there's no true bold or true bold italic when I select "Bold" and/or "Italic" (nor is Adobe Garamond Bold listed as a separate, standalone font in the menu)-- only regular and italic. Same thing with Adobe Caslon Pro. I've had similar issues with Word 2011 for Mac -- oftentimes the true Bold and BoldItalic for Adobe Garamond won't work. But I can fix the issue by trashing the Office 2011 font cache and then restarting Word. I can't seem to identify any such workaround for Word 2016. (I realize this sounds like an Office or Mac issue, but it only happens with Adobe fonts.)
Interestingly, if I reinstall Adobe Garamond Semibold and Semibold Italic, Word 2016 will give me true Semibold and SemiboldItalic when I select "Bold" and "Italic" in Word. But true Bold and BoldItalic are nowhere to be found.
Thanks.

Have you tried contacting Microsoft about this since the fonts obviously appear in FontBook, Adobe applications, and applications other than Office without a problem. The fact that clearing the Office 2011 font cache seems to eliminate the problem for you there would be indicative of this being a Microsoft issue, not an Adobe issue.
- Dov

Similar Messages

Font not available in Photoshop CS6 or Illustrator CS6 (Mac)

I have installed the Frutiger font family in the font library. It appears in the drop-down menu in InDesign, but not Photoshop or Illustrator. How can I make the font available in these programs?

It’s a ttf file – Frutiger. I’ve managed to get it into InDesign, but not Photoshop or Illustrator. Always seem to have problems with this font!
Van: Mike M <[email protected]<mailto:[email protected]>>
Beantwoorden - Aan: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Datum: dinsdag 3 december 2013 17:03
Aan: Lesley Chambers <[email protected]<mailto:[email protected]>>
Onderwerp: Font not available in Photoshop CS6 or Illustrator CS6 (Mac)
Re: Font not available in Photoshop CS6 or Illustrator CS6 (Mac)
created by Mike M<http://forums.adobe.com/people/CFMcBlob> in Photoshop General Discussion - View the full discussion<http://forums.adobe.com/message/5895881#5895881

What can I do to stop the pass word at start up for mac mini?

What can I do to stop the pass word at start up for mac mini?

Go to Settings>Security and Privacy>General and make sure the box that says "Require password....begins is not checked".

Upgrading LabView 2011 to 2012 for Mac OSX

I am considering Upgrading LabView 2011 to 2012 for Mac OSX.
Is this a free upgrade?
Is a Mac OSX version available?
Is the NXT module still working in LabView 2012?
LabView 2011 ain't broke but I just recived a vi which requires a newer version :-(
Thanks.
Michael
Dr. Michael Vallance
Future University, Japan.
Homepage http://www.mvallance.net
International Virtual Environments Research Group (iVERG) http://www.iverg.com

Is this a free upgrade?
It depends if you have a current service contract. You get a 1 year period where you will get updates to LabVIEW after purchase.
Is a Mac OSX version available?
http://www.ni.com/labview/os-support/
Is the NXT module still working in LabView 2012?
I have no idea.
LabView 2011 ain't broke but I just recived a vi which requires a newer version :-(
You can download a 30 day trial from the NI site.
http://www.ni.com/labview/whatsnew/upgrade/
You might have to contact NI directly since you are not in the US.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
   If it doesn’t quit, Force Quit it.
   Press command + option + esc keys together at the same time. Wait.
   When Force Quit window appears, select the application if not already.
   Press Force Quit button at the bottom of the window. Wait.
   Application will quit.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Adobe does not recognize footers in Microsoft Word 2007 to PDF

I have copied and pasted the details, below, from a previous message I have sent out to an assistive technology listserv.
I am encountering this problem with various builds and versions of Adobe Acrobat:
Acrobat X on a Windows Vista 64-bit build (note that this is the best Acrobat I can install on Windows Vista, Adobe Reader XI is not even supported)
Acrobat X on a Windows XP build, sorry, do not know the bit count (it is my work computer so I can't upgrade anything)
Acrobat 9 on a Windows 7 64-bit build.
I have also encountered and checked into whether or not the PDF reads (and does what I want it to) in JAWS 14, latest update (Feb 2013). We encounter the same problem with JAWS and this morning found out that there is a conversion error between Word and Adobe. (See this post, where the ---- are).
Summary, I have spoken with JAWS, put out a support ticket with NVDA via e-mail, spoken with Microsoft, and tried to communicate with Adobe about this issue for help and Adobe is refusing to help. The other places tried everything they knew but they could not get it to work. I even tried to strip all the page numbers from Word and number using Adobe's page numbering feature, but that was not successful either because I cannot use Roman numerals.
I would appreciate any feedback the Adobe Forums can give me; please note that I cannot post a sample document at this time as the only document I have is a private work document (cannot share those by policy, so I will have to make up a fake document if I get the time and energy).
Thank you very much for your time and expertise. The pertient info is above and below in "Original Message" and "Activities section" - the other information is there if you'd like to look. And to provide feedback to Adobe about things I think they could improve, since they will not let me email them directly.
----Original Message----
My question concerns the reading of Footers / Headers in Microsoft Word 2007 and Adobe Acrobat (headers/footers designed in Microsoft Word 2007 and then converted to PDF with "Bookmark" checked in Adobe Acrobat conversion settings).
The document is a word document containing 50+ pages. There are 12 pages of "front matter" that are marked with Roman numerals. Subsequently, the body text of the document has an Arabic number (1, 2, 3, 4, etc.) in the bottom right corner. Footers are used properly in the document. All Table of Contents links, which do link to both headings in the "front matter" and to headings in the body text, are picked up properly. Literately, the only thing not reading on the document are page numbers (the Word Status bar is reading its page numbers, but the page numbers in the footer are not reading).
I then need to convert the document to Adobe Acrobat PDF. Granted, I have a full copy of Adobe Acrobat X available to me, and my various assistive technologies have always functioned better when opened directly in Acrobat (rather than Adobe Reader). So, I set the accessibility options (from Word) properly, asking it to bookmark Headers and Footers as appropriate, thinking that this will pick up the page numbers and make them read as the bottom right corner of my PDF.
All links work in Adobe to navigate by section/heading. All figures are alt tagged. Everything is perfect - but the one thing that NVDA won't read are the page numbers. Visually, the page numbers are there on the document, but NVDA won't pick them up. Additionally, I also changed the appropriate page numbers in Adobe (Page Thumbnail Pane, on the Navigation Pane I believe it is called) - to reflect the section where it is Roman numerals and Arabic numerals. This did not help, and for what it is worth, I cannot get NVDA to voice when I am in this pane, so I don't seem to have a chance of getting the page number info from there.
NVDA reads the document just fine except for the above-mentioned snare. However, when it reads, it will go to the next page, and say, "Page 2 of 54, (page text), Page 3 of 54 (page text)," etc. when I will need it to say Page ii of 54 (page text), Page iii of 54 (page text)," and so on, changing to "Page 1" when the Arabic numbers are used.
I know that the Page Label issue is part of Adobe's issue, with them not releasing the PageLabel aspect. (I have looked through some NVDA tickets). I do not know how to put a "changeset" into my copy of NVDA though, or even if it would help (I have no computer scripting skill). The easy answer would be to upgrade to Adobe Reader XI and see if that helps, but I don't have the ability to put it on every computer I use, and *I need this file to read consistently across multiple versions of Adobe* (including Adobe Reader/Acrobat 9, X, and XI). (This file is also going out to people who may not have the latest version of Adobe, but are also running some copy of NVDA, either a portable or a full install).
Is there any way to pick up the Footers with page numbers voicing in NVDA, and/or have it read the user-editable page number box that is on Adobe's Toolbar (next to the 1 of 54 parentheses). This user-editable box, to jump to page numbers, reflects the Roman numerals I have loaded into the pages of Adobe. When I press Ctrl+Shift+N in Adobe, I can also go to the appropriate page (if I type in iii, it will take me to iii, if I type in 34, it will take me to the Arabic number 34 -- NOT the 34 of 54, which would land me on a different page. And I want to land on the page that has the Arabic 34, so that's functioning fine.
I just need the page numbers in the footer to voice, "Page iii," or "Page iv," or "Page 29," etc. If I could get NVDA to do that, I could say to viewers of this document, "If you are using NVDA, remember to Ctrl+Shift+N to get the GoTo Box, then type in the page number you want if you cannot follow a link or a bookmark." This document is *very* accessible in my opinion with lots of ways to navigate...the only aspect of navigation that isn't being picked up are those footer page numbers!
I do have my Document Formatting settings on the NVDA menu set to "Report Headers," but that does not seem to help in either Microsoft Word 2007 or Adobe Acrobat. I have even switched the page numbers from the footer to the header to see if that would help and it didn't.
----Activities I have done today----
I spent over an hour on the phone today with Freedom Scientific (makers of JAWS) trying to troubleshoot this. We discovered that Footers will not read very well in JAWS and Microsoft Word 2007 (only solution is to stop reading document text and read Virtual Viewer text briefly, then go back out to document text, then back into Virtual Viewer which is NOT an acceptable or accessible solution whatsoever -- too much work for someone trying to read the document) -- and then we also discovered that:
Upon conversion from Word 2007 to .txt file (.docx to .txt), there are no alt tags for the figures in the document, or page numbers.
Upon conversion from Word 2007 to Adobe Acrobat X then to .txt file, every insert of a page number and footer is replaced with the same alt numberpad numerical code: the one that generates female. ♀No wonder JAWS and NVDA are skipping this, neither understand how to communicate it.
On the advice of JAWS Technical Support I contacted Microsoft Accessibility Technical Support and spent an hour on the phone with them. They say that unless Adobe can find a solution, it appears that it is impossible for Microsoft products to read the footer if JAWS was unsuccessful doing what I wanted it to do. The document/footer in question includes about 12 pages of front matter (numbered in Roman numerals) and 44 pages of body text (numbered in Arabic numerals).
I kindly explained to the Microsoft Support Agent that I found this issue hard to believe, although I understood. Sighted folks have the ability to make their documents look quite professional and that is the caliber and quality of documents anticipated from everyone, especially college students graduating from school, or job applicants. That a coding issue prevents the footer from being read properly, except in Edit view, is disappointing. The representative was with me 100% of the way. She completely understood where I came from. And yes, when I am designing the document myself, I know what I put there (or I pretty much do, anyway). But if I recieve a document, it is much harder to tell what is really there or not, or how the page numbers really lay. And this is confusing as heck, believe me.
I then called Adobe Technical Support, after having a brief online chat with them. Granted, I had to leave the chat in the middle because I got interuptted by something that was high-priority, but the woman chatting from Adobe says that chat is only for installation issues, and I will have to pay to open a support ticket. Excuse me? I have paid a hefty sum of money for Adobe Acrobat 9 and Adobe Acrobat X (work paid for the other Acrobat X copy). I deserve this problem to be troubleshooted for free. There was even a statement on the Adobe Acrobat X website that said Acrobat X users didn't have to pay for support, but Reader users did.
----Slight bit of rant and constructive criticism----
In speaking with Adobe Technical Support, I had to wait on hold for 30 minutes before my call was answered, and then I had to consent to being on hold countless times and had to answer, "Yes, I am converting from Word 2007 to PDF using Adobe Acrobat X" at least 6 times. The representative would put me on hold, then ask me the question, then put me on hold again, repeated 6 times over 45 minutes. At the end of 45 minutes (1 hour and 20 minutes of wasted time by now, that I must justify to my employer) - I told the representative I wanted to speak with his supervisor immediately, I did not care if he was trying to fill out a support ticket (and putting me on hold at least 4 more times in 10 minutes while he claimed he was filling out the support ticket) - and finally he put me on hold again and gave me to a very helpful supervisor. Within 6 minutes of speaking with the supervisor the supervisor had my support ticket filled out and I should recieve a call from Adobe within the next 30 minutes if his estimation was right (he estimated two hours, but it's been an hour and a half).
I have yet to know what can be done about my document. Freedom Scientific Technical Support is closed now for the day and I need to work tomorrow and Friday away from the phone. As I stated to Microsoft Accessibility Support, I truly feel that Adobe should read the page footers, every document says that Adobe should be able to read the page footers, and I feel slighted that as a person who uses assistive technology, there is some glitch that isn't making this happen. I am not blaming a specific place per se, except I am a little frustrated with Adobe especially since they have not gotten back to me, and I am frustrated with their customer service. JAWS customer service and Microsoft customer service were both exemparly, and I cannot say enough good things about them. My wasted time with Adobe however, that was disrespect in my opinion. And I certainly will not pay to open a support ticket, and my workplace has a site license. They've paid enough already.
If you've read this far, thank you. I look forward to replies, or at least understanding. And if anyone has ideas, I'd appreciate it very much (yes, I have tried taking the page numbers off and using Adobe's page number feature, but that would not allow Roman numerals. Only Arabic.).

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

Adobe fonts not showing up in Photoshop

HI,
I am running Windows 7 and I noticed that many open type fonts that show up in the font list in Word do not appear in Photoshop CC, specifically the Adobe fonts like Adobe Fan Heiti and Adobe Gothic. How can I get these fonts into Photoshop CC. Thanks.

That's the font family field (window)
In photoshop 14.2.1, did you scroll the font list about 3/4 of the way down?

Cut/Paste from Word to Illustrator CS3 for Mac suddenly not working

This issue regards Illustrator CS3 for Mac on a Mac Pro with 6 GB.
Exactly one week ago I created a number of Illustrator files by cutting charts from a Word 2008 document and pasting them into an Illustrator document.
In the past I have dragged the images (or clip art) or simply used Control-C or even Control-X, but by whatever method I opted for, getting the image from Word to Illustrator CS3 has not been a problem.
Yesterday I got a new chart and a request to replace an old image - one that I had created last week on Tuesday by the Drag/Drop or Cut/Paste method.   For reasons I can't begin to imagine the process simply won't work now.
I also find that if I simply select text in a Word Document, hit Ctrl-C and then try a Ctrl-V in Illustrator I don't get to see my text pasted in - ONLY if I already have a text block open and the cursor in place will I get to see the text copied over into Illustrator. This is very strange and not at all how things have worked in the past - typically I would see the new Text Object just appear, and then I could move it to wherever I wanted.
I have opened up a number of old files that I know were created with copied text and also opened the associated Word files (earlier versions of Word) and again find that I can't copy text over, or even move images over - even though I clearly could do this before. I have also tried entirely new files - also with no success.
I was at an Apple one-to-one session this morning and they were more than mystified by this. I can Cut and Paste into Adobe Photoshop Elements, but I can't even cut and paste from Adobe Photoshop Elements into Illustrator CS3.   I can drag the Photoshop file (from the Finder window) into the Illustrator document and poof - get my image that way, but it's as an image only. If the base image in question is a vector image or something else having a plurality of elements, I can't then select the elements in Illustrator to change their color, delete them, or otherwise play with them.
I have brought up a word document on another Mac system that also has Illustrator CS3 and find that it too can't drag/drop cut/paste between the two applications.   At Apple, we did confirm that such ability is operational in the new Illustrator CS4, but none of their store systems still have CS3 to provide yet a third system to test.
I have deleted my Illustrator CS3 preferences, tried flushing the p-ram, and of course run fix and repair permissions - no dice.
My Mac systems update daily and there is nothing in the main update log that shows anything for Adobe or Office (nor do I think there should be). Adobe Update reports that everything is up to date, and I don't see a history file to know what might have changed in the last week.   Office also reports fully up to date and happy.
As I can cut and paste the images into an email for Mail and into Photoshop, I am fairly certain that it is NOT a Microsoft Office 2008 issue. The fact that another Mac with Illustrator CS3 also can't cut and paste suggests that is is really not something personal to my main system.
It is almost as if this is some clandestine "update" intended to encourage me to buy Illustrator CS4. Given that I bought Illustrator CS3 less than a year ago, I really am not eager to buy the new version.   The greeting on the Adobe Support page that CS3 is no longer the current version and therefore supported was most annoying.
I am really hoping that someone out there has an idea of what to try changing, removing and/or adjusting with respect to Adobe Illustrator CS3.

I tried the Select by Path option - can't believe I missed it - and found it made no difference.
I actually uninstalled and reinstalled the whole app. When I tried to simply re-install (can't remember it's exact phrase) it got part way through and then demanded another disk - but I only have one DVD with the application - the extra DVD is for tutorials and it didn't accept that one either. So I restarted that process and chose to completely uninstall. Then reinstalled - hey with only my one disk - gee, just like the first time.   And then it seemed to work.
I was not aware of the save as PDF option - but yes I have Adobe Acrobat Pro 9 for Mac so that option is there - and it seems to work too.
There were of course a slue of updates, and I let them all proceed - but even with them all in place the system is fine and I can once again drag and drop / cut and paste things back and forth.   I just tried a text block and "The Quick Brown Fox" pasted in with a clipping mask about 10 times the size of the document, but other than that it was ok.
So I have things working again on my primary system.   Will try and figure out what's wrong with the other one - but a reinstall might be the easiest game there too.

PS1 fonts not accessible in CS4 & MS Office 2008 - but FontBook shows them

Desperate:
I just installed Snow Leopard and found that in all of Creative Suite 4 and Office 2008 my Postscript Type 1 fonts are not available or accessible. The font Book lists them (I removed duplicates and indicated problem fonts, which actually never were problems in OS 10.5). I tried all kinds of install, delete, re-install etc. to no avail. Everything worked great under OS 10.5. (Same results on my wife's computer; both newest iMacs).
I spent hours reading blogs, comments etc. on the internet, but found no answers — even have the feeling the problem is completely ignored by Apple, Adobe and Microsoft. Yet the livelihood of a graphic designer depends on it.
I have hundreds of carefully designed documents, important design jobs that I constantly have to use again, and I spent a fortune on type libraries with over ten thousand quality fonts by different foundries — a treasure I don't want to lose.
Is there any answer to it? Otherwise I have to go back to 10.5

First, I am not speaking of the pre-installed fonts or those that come automatically with programs.
Yes, I realize that as you clearly stated you are unable to use Type 1 PostScript fonts. My response of "any" included Type 1 fonts. I can pull Type 1 PS fonts from an Illustrator 8 disk and use them with no issue, nor any other Type 1 fonts I have (thousands). Same goes for all other types of Fonts OS X supports.
After upgrading to 10.6 (no fool around or extras, just plain upgrade) all these fonts are not accessible anymore out of the CS4 Suite or Office Suite, which is basically all I need and use (well, also Filemaker).
This is partly why I asked you to create a new test account. I'm trying to see if it's just your existing account that's not working (which would mean the problem is only in your account), or if the fonts don't work with any account, even a new one (which would mean a system wide problem).
FontBook should be mature and good enough to handle the fonts,
Font Book has been around for four versions of OS X now, but it's still a light use font manager. Anyone in prepress, design or whatever a person does who handles a lot of fonts regularly should be using a more heavy duty font manager.
and I also tried Font Explorer X, which didn't help either.
So it's either a problem with your system overall, or your account. Please try a new account to rule out one or the other.

Microsoft Word 2011 Keyboard Shortcut for Indentation

Is there a keyboard shortcut on word for indenting/tabs back and forth. I know on PCs it is alt+shift <-- or alt+shift -->. what is it for mac?

do you know how to at least stop the time out circle?
I concur with the others about using the MS Office forums for this issue. However, with regard to the question above, there really isn't a way to stop the beach ball cursor. That cursor only appears when a particular app is not responding. Sometimes that happens when an app is performing a lengthy and intensive task and is temporarily too busy to respond, in which case the cursor will eventually go away on its own. Other times, this happens because the app has frozen, in which case the cursor will never go away on its own, and the app must be force quit (press command-option-esc, select the app that's not responding and force it to quit). Note that force quitting should not be done too quickly, as forcing an app to quit while it is in the middle of some intense task can cause any number of problems, including corruption of whatever data the app was working with at the time. Any time force quitting becomes necessary, there is a serious problem with the app experiencing the issue.

Converting .pdf files to Word in Pro v9 for Mac

I have just purchased a copy of Acrobat Pro v9 for Mac with the idea of converting .pdf files to word documents in the correct format and for editing. When I attempt to export a .pdf file to Word (2008) or save as a Word doc or docx file, the file doesn't open and my Word program freezes. To unfreeze, I need for force quit Word and begin again. I was told that pdf to word could be done in this version of Acrobat. Has anyone had this experience?

What type Document, was it to begin with? (Text/Image)
If the PDF was a Text document, you should be able to with no problem?
IF text based and converted, try opening word first then open the document.
There is a format that Word will read called RTF (Rich Text File), that Word can read.
Try converting to RTF then try opening. When opened then save as DOC or DOCX
If it was created from a scan, Word my not open it, because it is an image (a Big Picture).
Finally, if it has a lot of images, they may not do right, and may cause a lot of problems.

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

Time Machine will not complete backup with WD My Passport for Mac

I am on 10.10.3 and am trying to backup up this particular machine for the first time. I had a 1TB WD My Passport for Mac that worked fine on my older Macbook Pro (which has not been updated to 10.10.3) and have been slow in getting around to backing up this new machine. I tried the 1TB after clearing space and it wasn't working. Figured it must be something with that drive, so I bought a new one (needed more space anyway) and just received a new 2TB WD My Passport for Mac. Tried the update again via Time Machine and it went through the entire process only to tell me it couldn't complete. The drive has something on it now because it doesn't have the full 2TB free and in finder the file says "in progress" at the end of the file name under backup. Please help. I need to backup this machine and now think it is Apple related and not drive related.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Print Studio Pro plugin is not compatible with Photoshop Elements 12 Editor for Mac

It appears that the latest version of Print Studio Pro PlugIn is not compatible with the Editor version of Photoshop Elements 12 for Mac as available on the App store. The install gives an error saying that it did not find a supported version of Photoshop Elements. This error has been reported before for Elements version 12 but was reportedly fixed in the latest version of Print Studio Pro. Now it appears that this version may support Elements 12 for Mac but not the Editor only version from the app store. Any suggestions for work-around on this?

"Any suggestions for work-around on this?"
No!
Not untill Mac and Adobe and Canon get their collective acts together. Mac (Apple) has the bad habit of upgrading their stuff and not being forthcoming with the particulars given to 3rd party companies like Canon and Adobe.
Besides the cost difference of Mac's the compatibility issues are it's worst features.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Adobe application manager won't recognize Acrobat Pro XI for Mac

I purchased and downloaded Acrobat Pro XI for Mac. The installation is successful, but when I attempt to open it the Adobe Application Manager interrupts and says "Serial Number you provided is valid, but a qualifying product could not be found on this computer." It then says to "To use this serial number, you must own one of these qualifying products. Please choose the one you own an interest serial number." Except Adobe Acrobat Pro XI is not listed. I confirmed I purchased Adobe Acrobat XI Pro (Mac,English) and the serial number I have is correct. Please advise.

This error message comes when you try to activate the upgrade version which requires the previous version to activate.
Please follow the steps to activate the upgrade version product.
1. Install the porduct and enter the upgrade version serial number
2. When it asks for the previous version serial number, enter the older version serial number
3. You would be able to activate
In order to locat the serial numbers please follow the below link:
https://www.adobe.com/account/my-products-services.html

Adobe fonts not accessible in Word 2011, Word 2016 for MAC

Similar Messages

Maybe you are looking for