CW: Report Export
I'm trying to export a "Campus User Tracking" report to a CSV file, after getting the "Exporting Report" window and clicking "OK"
I get a beep and the window disappears. Can't find an exported CSV file anywhere. Is there a export report configuration parameter
that I'm missing? The "PDF" export works and sends a file to my monitor.
What version of Campus Manager? There were some export bugs in earlier versions, but everything should be working in Campus 5.2. Additionally, make sure your MIME types are properly setup in your browser. The CSV file type may be associated to a bogus application. You might try using Firefox or test a different client to rule out a server issue.
Similar Messages
-
Report export to csv - no data found in report
Hi all,
I've followed the steps to export my report to a csv file. In the Report Attributes, Report Export section I have:
Enable CSV output: Yes Separator: , Enclosed By:
Link Label: Export
Filename: Changes.xls
But when I open it in excel, no data found is the only test showing in cell A1.
Is there something else I need to do? I don't understand why it's not exporting my report - there is data on my screen in the report.
Thanks,
DaveDave,
Have a look in my blog:
http://deneskubicek.blogspot.com/2007/03/csv-export-problem.html
There is an explanation on how to avoid that.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Will SUBMIT report EXPORTING LIST TO MEMORY work, when Run in Background?
You can use SUBMIT <report> EXPORTING LIST TO MEMORY, and then Call the FM LIST_FROM_MEMORY to get the Data.
This works fine, when the Program is Run in Foreground. My question is, will it work when I Run the Program in Background? i.e. When I Run the Program in Background, will the SUBMIT Statement, Export the List to Memory? Because only then the FM LIST_FROM_MEMORY will get the Data.
Any alternate solution to meet the same requirement will be appreciated.It works for me... my spool output looked like:
11.01.2008 JC: Calling program - test list to memory 1
ZLOCAL_JC_SDN_CALLING_PROGRAM started at 12:54:29
ZLOCAL_JC_SDN_CALLING_PROGRAM call complete 12:54:30
ZLOCAL_JC_SDN_CALLING_PROGRAM started at 12:54:30
11.01.2008 JC: Called program - testing list to memory
ZLOCAL_JC_SDN_CALLED_PROGRAM was called at: 12:54:29
for the following code:
report zlocal_jc_sdn_calling_program.
parameters:
p_start(1) type c.
start-of-selection.
perform testcase.
*& Form testcase
form testcase.
data:
lt_list type table of abaplist.
write: / sy-repid, 'started at', sy-uzeit.
submit zlocal_jc_sdn_called_program
exporting list to memory
and return.
write: / sy-repid, 'call complete', sy-uzeit.
call function 'LIST_FROM_MEMORY'
tables
listobject = lt_list.
write: / sy-repid, 'started at', sy-uzeit.
call function 'WRITE_LIST'
tables
listobject = lt_list.
endform. "testcase
and
report zlocal_jc_sdn_called_program.
start-of-selection.
write: / sy-repid, 'was called at:', sy-uzeit. -
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
Severity:1
Type:PKN3saw9ExceptionE
File:saxreader.cpp
Line:681
Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PMProblem solved!!
<br><br>
See this part of the query:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:P15_CANVI_DE_CLUB</FONT> ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br>
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:ASSOCIAT </FONT>';<br>
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br> -
Hi Expert , crystal report export problem. system not responding
Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar GuptaDear Raj,
Please try this
Try
Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
rptDoc.Load(rptPath)
rptView.ShowExportButton = True
rptView.ReportSource = rptDoc
For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
oSubReport = rptObject
rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
Next
End If
Next
Next
'Setting Paper
Dim rawKind As Integer = 0
Dim printSet As New System.Drawing.Printing.PrinterSettings
For i As Integer = 0 To printSet.PaperSizes.Count - 1
If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
Exit For
End If
Next
Dim MyTest As New SaveFileDialog
rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
rptDoc.ExportToStream(ExportFormatType.Excel)
'rptDoc.SaveAs("C:\TBKING.xls", True)
'''How to export the report
Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim rename As String
rename = rptName.Replace(".rpt", "")
Dim CrFormatTypeOptions As New ExcelFormatOptions
CrDiskFileDestinationOptions.DiskFileName = _
"c:\Report\" & rename & "_Export_File.xls"
CrExportOptions = rptDoc.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.Excel
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
rptDoc.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
'' end by kevin shah
rptView.Show()
rptView.ShowExportButton = True
Dim oFrm As New System.Windows.Forms.Form
rptView.DisplayGroupTree = True
rptView.Dock = System.Windows.Forms.DockStyle.Fill
rptView.Location = New System.Drawing.Point(0, 0)
oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
oFrm.Controls.Add(rptView)
oFrm.Name = "Report Viewer"
oFrm.Text = "Report Viewer11"
oFrm.ResumeLayout(True)
oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
oFrm.TopMost = True
oFrm.ShowDialog()
Catch ex As Exception
objMain.objApplication.MessageBox(ex.Message)
End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin -
Crystal Reports export and print fails with SSL / https but works with http
Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
Export to PDF : nothing happened.
2: Print:
Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much! -
Apex 4.0.1 classic report export
Hello once again all you Application Express experts.
I am having some difficulty getting an apex classic report to export the results of the report grid.
This is a classic report being run, not interactive.
It is also as an SQL Query (PL/SQL function body returning sql query) for the report identification type.
The function body is of decent size, maybe 200 lines at most, but i have narrowed it down a couple of problematic lines.
The report runs perfectly when I take out the follow line from the function...
v_return := v_return || 'AND instr('':'' || ''' || :p3_status || ''' || '':'','':'' || xel.employment_status || '':'') > 0 ';
So :p3_status is a checkbox item on the page, with three options: Active, Terminated, Retired.
In the repeatable failure scenario :p3_status = 'Active'.
One of the interesting parts is the report grid always returns the right results to the screen, it is just the report export that fails.
It never errors, it just returns a no data response to the file being exported.
This is Application Express v 4.0.1 running on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit.
Any thoughts or any troubleshooting hints anyone can provide?
Thanks,
HaydenHayden,
Why do u need to append the item value in the PLSQL function body when apex will take of that(using its bind value).
Your predicate is actually a static one since only the item value changes (and that can be handled by its bind value). So avoid concatenating it in the function body to build the clause(which has the additional problem of passing in the item value to the function)
Change it to
v_return := v_return || q'!AND INSTR(':'||:p3_status||':',xel.employment_status) > 0!';
Notice that the :p3_status item evaluation happens only in the apex page
Also making use of the q function to escape quotes, it makes life much more easier in these cases. -
Report Export to csv doesn't correct translate additional characters in 3.0
Hi all,
i'am using apex 3.0 and the report export build in function does not export the correct german umlaut ( "ü" is translate to "ü").
My characterset are
NLS_CHARACTERSET: WE8ISO8859P1
DAD CHARACTERSET: UTF-8Go in "Application > Shared Components > Edit Globalization Attributes > Globalization" and change "Automatic CSV encoding" to YES. Should work!
Adrian -
Issue with SSRS Report Exporting to Excel and word
Hi,
When report is exporting in word and Excel getting format issue, but same report export with pdf there is no issue.
Regards,
AfrozYou need to be always careful when export format is Word and specially Excel. Sometimes report result looks good in Report Viewer and PDF too, but it may not in MS Word and MS Excel.
You need to understand Word and Excel limitations and align all the data regions (Tablix, Rectangles, Texboxes) in correct way.
Also, you may post the actual formatting issue that you get. (With screenshot if possible)
Please read Limitation section in below:
Exporting to Microsoft Word
Exporting to Microsoft Excel
Refer:
Ten Common SQL Server Reporting Services Challenges and Solutions
-Vaibhav Chaudhari -
Crystal Reports Server - Scheduling Report Exports
Dear Experts,
We are using Crystal Reports Server XI Edition and we would like to schedule report exports. Crystal Reports Server configuration console allows us to automate report exports but apparently we could not find a way to pass report parameters and formulas from any export management tab. Naturally, each report needs to take different parameters but to our knowledge CRS management console does not have a screen that prompts us to key in or to read dynamic report parameters and formula. It simply uses the default report parameters. Can you confirm this please?
To overcome this limitation, we are thinking of developing something like a script that directly interacts with CRS. The script would pass the name of the report, the report parameters and other relevant details like CMS username/ password.Do you think this is possible and if yes can you please point us to the key APIs required for scheduling report exports?
My sincere thanks for your assistance.
Kind Regards,
Joseph.You are able to change the parameters for the report within the Central Management Console under the processing tab before scheduling.
Here is some sample applications that you can refer to in regards to doing this using the api:
[http://www.businessobjects.com/global/doc/dev_zone/Java_SApps_q405.zip|http://www.businessobjects.com/global/doc/dev_zone/Java_SApps_q405.zip] -
Dynamic file name for report export to csv
If "Enable CSV output" = "YES" for a report region titled "Invoices", the default file name is "Invoices.csv". If I have a parameter, Pn_MONTH, for the month (e.g. Jan 2010, Feb 2010, etc.) and the report only shows data for that month, I would like to have the resulting file named "Invoices_Jan_2010.csv".
I've tried setting the Report Export Filename to "Invoices_&Pn_MONTH..csv" and setting the region title to be "Invoices_&Pn_MONTH." but the resulting file name is coming up as "Invoices_.csv"'. I even tried "Invoices_:Pn_MONTH.csv" just to be sure but that makes it "Invoices_:Pn_MONTH.csv"'.
How can I get this to work?This same method works for generating dynamic column headings from other page items, but I've never tried it for the download file name.That's the problem. The parameter P_MONTH is itself a page item and this is not consistent with other dynamic substitution. Looking at the page source, the export link is
f?p=102:9:8985946323211742:FLOW_EXCEL_OUTPUT_R2805111921107129_en-uswhere presumably "FLOW_EXCEL_OUTPUT_R2805111921107129_en-us" is an application process and "2805111921107129" is the internal id of the region. The filename is not part of the link. -
Report exported into excel contains garbage character but is good in PDF
Issue
Report exported via CrystalReportViewer (integrated via JSP) into Excel or Word format contains garbage characters.
Based on investigation, following observation was gathered:
1. CrystalReportViewer, PDF - Good
2. CrystalReportViewer, Excel - Bad
3. CrystalReportViewer, Others - Bad
4. InfoViewer, PDF - Good
5. InfoViewer, Excel - Good
6. InfoViewer, Others - Good
Software (Platform): BEA WebLogic Server (AIX/Windows) - Crystal Report Server (Windows)
Appreciate if anyone could provide any clue which part in the integration could have gone wrong.
Thank you.Another way that might work is to remove all extra characters and whitespace outside of the <% %> tags from the jsp page that contains the viewer.
e.g.
Not Correct
<% some code %>
<% some more code %>
Correct
<% some code %><% some more code %>
(Line feeds and whitespace count too)
Also - see this kbase article:
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=4595908&sliceId=&dialogID=17986169&stateId=1%200%2017984767
a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite -
Access Report exporting to Excel Horizontally
I've got a rather large report in Access, based on a couple of forms.
When i preview it looks fine, Textboxes are all in order with the make and model then the data in text boxes in a column below.
There are 7 columns of text boxes like this.
When I export to a PDF, it's in the right format, 7 columns next to each other.
When I export to Word and even a text file it works fine.
When I export to Excel, they all go horizontal...textbox name in row 1 and all the data in row 2, clear to column IV and that's it.
What am I doing wrong?
Thank you for any help.
GeeHi Gee,
According to the desription, when the report exported to Excel, the layout is incorrect.
Based on my test, the Access doesn't export the textbox into Excel, it just export the data in the report. Here are the test steps for your reference:
1. Create a table with some fields in Access 2013
2. Create a reprot based on the table by default
3. Export the report to Excel by External data->Export->Excel
Did I misunderstood? Also a demo database to help us reproduce this issue is much appreciate.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Expense Report Export does not create Invoice in AP
Hello,
I have created several expense reports in AP (Running EBS R12, I am not using iExpenses), but when I use the Expense Report Export request, the invoices are not created. I have looked online and found some plausible solutions. None of them have worked: I've made sure the Employee payment method is set up; the Usage rules for payables are also set up for Employee Expenses in the payment processing transaction type. In the Payables Option screen, I have selected the Automatic Employee as a Supplier option.
Here's the Expense Report Export log:
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXEXPER module: Expense Report Export
Current system time is 29-APR-2013 11:09:53
**Starts**29-APR-2013 11:09:54
**Ends**29-APR-2013 11:09:55
Start of log messages from FND_FILE
Begin Receipts Management - Holds
Process Hold Each Scenario
Determine whether to place Holds
Process Hold All Scenario
Determine whether to place Holds
Process Hold BothPay Scenario
Determine whether to place Holds
Process Obsolete Holds
Obsolete Holds
Obsolete Both Pay Holds
Begin Processing Individual expense reports
Fetching expense report...
Expense Report Number : **110**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **REEMBOLSO 25ABR2013**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_ASTRID_EXPENSE**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **TEST_EXPENSE_AGSV**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Expense Report Number : **101**
Transfer Attachments option(Y/N):Y
Fetching expense report...
Credit Card Expenses Fetched = 0
Credit Card Invoices Created = 0
Call Payables Open Interface
Expenses Fetched = 5
Invoices Created = 0
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 4105067
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-APR-2013 11:09:55
What else do I need to do? Am I missing something?
Thanks in advance,
AstridI found the answer and I am posting it here in case someone else needs it:
You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
Regards,
Astrid -
hi,
I am using the report export feature of oracle APEX. IT is working fine except i m getting something like this (div tag start)div id="report_19777432813352373_catch""First Name"
in the first column of the report and the report ending with (div tag end)/div..
i just need "First Name".. Can anyone help me out?
Thanks in advance
Vishal
Message was edited by:
apex_learnerHi
In the report attributes, under Layout and Pagination, set the Enable Partial Page Refresh to No.
Regards
Paul -
Report Export - No data when query based on Application Context
I updated my Query Region source to use a Global Application Context and now the Report Export (to .csv) download has no data. This appears to run the query again in under a different session_id perhaps(?)
In a before header process I set the session_id to access a couple of date values set by the user via LOVs - the 'Search' button and an After Submit Process sets the context values which are accessed in the where clause, i.e
where date_attribute between to_date( SYS_CONTEXT('MY_CTX', 'START_DATE'), 'dd-Mon-yyyy')
and to_date( SYS_CONTEXT('MY_CTX', 'END_DATE'), 'dd-Mon-yyyy')
If you know any solution or alternative approach I'd be very grateful for your tips. I like Apex because you can leverage core Oracle database technology but then in some case you do hit these little troubles!
Thanks
CraigThanks for the link to the posts.
I considered the Security Attribute but thought that was somewhat inappropriate for just the one page I am setting the context; I understand the Security Attribute function would set 'My_Ctx' values on all page requests.
Maybe you are looking for
-
SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)
Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
-
IChat AV: Problems one after another
Hi, I had posted in one of the other threads but know that I am not supposed to hijack, so I hope you'll bear with me if I start another one. I have been trying to set up an iChat with my brother so that my kids can talk to his kids (and so that the
-
When saving a file in Indesign the tab goes off the top of the page
Having trouble with dragging the size of the artboard window and when I save a document the top of the tab goes off the page?
-
Application Manager (6.2all) fails to Install Apps and Update Apps
I have searched the forums for weeks and have yet to find a solution that works. I am currently running WIndows 7 Pro 64 Bit in a corporate environment. I orginally installed all my apps from the Application Manager and then one day about a month a
-
Issue with the field (Trading Partner) in the BW report
The Info Object 0PCOMPANY (Trading Partner) is having a reference char 0COMPANY in the BW system so the data for the field Trading partner text will be pulled from 0COMPANY_TEXT data source. I have checked in the info object 0PCOMPANY in the tab mast