Adobe Lightroom 4. When using the HSL / Colour / B
In the Develop Module, why have my colours in the HSL/ Colour / B & W Tool sliders disappeared ? I purchased Lightroom 4 over the net from Adobe. Any help would be really appreciated. I am not that technical in my knowledge
Thank you for your feedback. I tried doing as you suggested. While in the Develop Module, I clicked on Panels from the drop down menu and then reselected the HSL/ Colour / B & W, but unfortunately, if I followed your directions correctly HSL/ Colour / B & W sliders are still B & W. I should have added that I have downloaded Apple's latest operating system. I did read on another forum topic that there was an issue in Lightroom 4 with sliders going white, associated with Mavericks OSX. That sounds like the problem I have. I did note I still have functionality, but having the colours visually on the sliders does assist me (at least).
On that note, does any one know if the issue in Lightroom 4 with sliders going white, associated with Mavericks OSX has been resolved?
Similar Messages
-
Adobe is slow when using the reader
adobe is slow when using the reader; It is very slow when I give to another person
I am working in Windows 7.
I have a pdf with 1900 pages of maps. I am using adobe acrobat 10 standard and sampling adobe acrobat xI pro. When I click on links moving from each map takes about 8 secs. when I save the file and give to someone that is just using adobe reader the process takes 20 to 30 seconds to move. -
Lightroom crashes when using the Adjustment Brush
everytime i try to use the adjustment brush it crashes lightroom? help
Message title was edited by: Brett NHey Brett,
Thank you for your quick respond
Well, there was a message after it crashed asking me if I want to report or send an email, which I did. Then it says that Adobe is an able to know the problem. Maybe this is the message you are talking about.
I have imported the same file from another source, and to a new catalog. same thing. In fact, I managed to apply both tools before it crashes, now every time I go to the same photo and just zoom in and out, it crashes.
I then uninstalled 4.3 and downgraded to 4.2. It works fine with this version (even the same old file that caused everything) it is just really slow version. 4.1 (straight from the CD) was REALLY fast and with no issues.. or maybe I didn't get to push it to its limits. 4.3 is slower but crashes. 4.2 is very slow but never crashes.
I'm saying that after uninstalling and reinstalling all these versions couple of times each.
I was considering upgrading my OS to 10.8.3 (even though I really don't want to) just to see if I can run 4.3 properly. But then I read that 4.3 is widely problematic and that is why 4.4 is coming out so soon.
What do you suggest? Should I stick with 4.2 for the time being? Just received a reply from another staff member saying that I should just wait for 4.4 Is there any time frame to the release?
Sorry for making it this long..
Much obliged
Ab -
Adobe X error when using the email button
I recieve an error stating "An error occured while sending mail"
I have set Outlook to be the deault, uninstalled Adobe X, repaired Office, etc. Nothing seems to help.
It was working untl my last update.
Any help would be great.
Windows XP SP3
Office 2003
Adobe Reader X
Thanks
DannyHi Danny,
Without knowing all the variables (recent updates, security settings, etc.) it is difficult to tell what the problem is. The best way to find out if the problem is localized to your machine is to possibly troubleshoot on another machine.
If it is localized to your machine then there have been enough changes made that it has affected how you email pdf's, and if you have already done a clean install of Adobe Reader X that would take you to the next step, to look at Outlook (besides running the repair tool). Again troubleshooting on another machine might be helpful.
The reason I impress troubleshooting is that I maintain over 70 (destop/laptop) machines that have the current version of Reader X and they run various versions of Outlook from 2003 to 2010; the only time I have run into the issue you speak of is with Outlook 2010 64 bit, which there is no current fix. I had to roll those machines back to 32bit in order for them to be able to email PDFs.
Best Regards
Jeff -
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!
Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!
Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium -
How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe. -
When using the text box( typewriter ) It appears black but when I click away it is a lighter grey. I am using Adobe Acrobat Pro 10.1.13
. How do I fix this? It never used to do that.@Hi cj0094,
Please try changing the registry key HKCU\Software\Adobe\Adobe Acrobat\10.0\Annots\cAnnots\cfreetext_003_afreetexttypewriter and change the opacity back to 1. This should reset the color to black.
Note: Please backup the registry before modifying it.
Regards,
Rave -
Why does Adobe 9 standard crash when using the digital signature
When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.
I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78 -
Security error when lightroom attempts to use the internet
When using plugins e.g. smugmug or facebook after upgrading to Lightroom 3 I get -
System returned "securityError"when lightroom attempted to use the Internet.
tried to repair LR3, did not work. Suggestions on how to fix this?Reply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later.. -
How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?
Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully. -
I have installed Adobe Lightroom CC. In the process of launching, a popup appears, that says: "AN INTERNAL ERROR HAS OCCURRED. Cannot create the required folder: /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets." So even though Lightroom CC is installed, it will not launch. What do I need to do to allow it to launch?
The problem was solved today. Here's the full story. I'm a Mac user. At first I installed Lightroom CC on my iMac (desktop). I had this problem so I called Adobe, and was referred to a "special unit" . After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time. Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it. Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem." I asked if I would have the same issue later when I installed it on my laptop (Macbook Air). She said probably not.
But I did. The same internal error popup arose on launch and launch did not complete on my laptop. I tried chat but no joy so I eventually called Apple Care. I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name. The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder. The folder is actually there, but they hide it. I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer. Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder. For some reason, the inability to create that folder in the launch process was preventing launch from being completed. The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar. Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name. Once done, I shut down my laptop, and then rebooted. I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one.
I am not a geek, so I hope this makes some sense. I also hope Lightroom launches again tomorrow and beyond! -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
When using the Mozella Firefox 4 browser and the NEW version Adobe Reader X, PDF's online will not ever open. After 1-3 minuites, I eventually get a message the Adobe reader is running, but need to close and try again! I get same results when trying again.
Internet Explorer operates and opens the online PDF's all ok and the Adobe Reader X seems to operate all else ok!
I think, but not sure, that this issue appeared when the Adobe Reader updated from the older version 9 or so to the NEW Adobe Reader X version about 1 or 2 weeks ago, but not sure. I just remember that Mozella always worked ok previously to the Adobe Reader X version for opening online PDF's last month, etc.
Note that I said that Internet Explorer browser operates ok Using the New automatically upgraded Adobe Reader X for viewing PDF"S! (adobe notified me that the new version 10 (X) was available for updating, etc) I also just discovered that google chrome browser opens the online PDF's ok!
I have not trying re-storing the computer to the previous month, etc, since the issue seems to be with Mozella not liking the Adobe Reader X version and Internet Explored browser operating ok!
Any ideas????I had the same problem and my solution was to disable the PDF extension that came with Firefox 4 which belongs to another company. I found out that it wast interfering with ReaderX. I unabled it and restarted Firefox. I have had no problems since then. Go to Tools, Add-On and click on Extensions and disable the PDF extension. I hope this helps
Maybe you are looking for
-
Why won't my mac automatically select my home network?
Why can't my Mac AUTOMATICALLY connect to my wireless hub. I get a message that the network can't be found. This occured after I had to reset the hub and then had to re-setup the network.
-
RFID / Auto-ID 201 - An ASUG Webcast
This event is available for ASUG members only. Please do not append any comments onto this thread. Please join us in this "RFID / Auto-ID 201" webcast on 10th August 2009 from 2PM - 3PM US EST. Please [click here |http://www.asug.com/EventsCalendar/E
-
Easy way to highlight the row you are editing
Hi, How can I easily highlight the row in a report with an edit button when I click this button. If I click it I go to another page but when I come back( After saving modifications) I want the row I just edited highlighted Thank you for the help Erwi
-
Procedure Builder 9i developer suite
I have done a full install on my Windows 2000 machine, but can't find Procedure builder installed (or an option to install it). Does anyone know what I'm doing wrong? thanks, robin
-
My ipod not only does not know who it's owner is, but it also does not know how to reset itself!
I am trying to reset my ipod, AND my email as well!! Thank you. Shawn Stopper