Adobe Media Crashes for Panasonic MXF HD Files

I have been using Premiere Pro CS4 (ver 4.2.1) for several years on both a Win XP and recently on a Win 7 OS machine with good results for SD video. Recently I tried to encode some Panasonic P2 MXF 720P/60P HD video on the timeline to MPEG2 using the Adobe Media Encoder (ver 4.2.0.006) and had a crash in less than a minute of encode time (see attached crash report). This crash is very consistent on either the Win XP or Win 7 machines. If the video on the timeline is just a few seconds, it seems to encode OK.
I contacted Adobe support, but did not get any help in solving this problem. I would really like to be able to encode MXF video with Adobe products, but need assistance with this crash problem. Has anyone seen this problem before and what did you do to solve it? Thanks in advance for your help.
Gateway LX6810-01 Desktop
Intel Quad CPU Q8200 @ 2.33GH
64-bit Win 7 OS
8GB RAM
Seagate ST310003 33AS CC3H SATA HD
Random Access: 15mS
Ave Read: 101.2 mB/s

Gaps can cause all sorts of failures.
One trick that I use to locate any is to first Zoom In on the Timeline. Hit Home to move to the beginning of the Timeline. Then, use the PageUp to step through the Clips. The CTI (Current Time Indicator) should jump smoothly from Clip to Clip. If you get a hiccup, or what looks like a stutter in the CTI, check very closely for a gap. Depending on your screen rez, and the Zoom-level, you might not be able to see the gap clearly, but the CTI will show you where it is.
Good luck, and hope that it's just a gap,
Hunt

Similar Messages

No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.

No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.
Only the "Adobe Standard" is shown. In metadata I can see that the camera and lense were recognized correctly. What could be the reason?

The sample GH4 raw file I found on PhotographyBlog does have a lens profile that the Adobe applies automatically without having lens profiles being enabled. This is indicated in Photoshop CC / ACR 8.x so perhaps LR 6 will give us the same indication:
By comparison, here is what the uncorrected raw file looks like in a raw converter that doesn't do lens corrections:

Adobe Media Player encoding F4V from MP4 file

I have been encoding with Adobe Media Encoder CS4 and exporting f4v files. I understand the settings pretty well and have been successful with the process until someone sent me an mpeg4 video. When I bring into Adobe Media Encoder CS4 it will not recognize the video, but it will encode the Audio.
My research shows that unless the Mpeg4 video is from a Camcorder it may not import.
Is that Correct?
I do not have the source for these Mpeg4 files, might it be some contatiner Issue?
Anyway around this besides having to import to FCP or Quicktime Pro to export as a .mov file?
If I do import into FCP or Quicktime Pro, wont that decrease the quality?
Thanks, Bruce

I having the same issue.
Any insight on a solution?

Adobe Media Encoder won't take mov. files!?

My Adobe Media Encoder will not take mov. files! That should not be a problem, right? When I click the Add-button the mov. files is not listed up unless I choose to show all files. And when selecting the file, the program says the file could not be imported -_-
Probably a stupid newbie mistake, but can anyone tell me what it is?
I have downloaded the latest flash CS4 trial package, which include the encoder, and am trying to encode files provided with adobe's book "Adobe flash CS4 professional - Classroom in a book"

I found the answer. I needed to install Quicktime lol

I received an email containing pdf files. I am using Adobe Reader Touch for Windows 8. File doesn't open

I received an email containing pdf files. I am using Adobe Reader Touch for Windows 8. File doesn't open. I am a new user to Windows 8.

The full featured Reader for Windows 8 is Reader XI.
Reader Touch works in all Windows 8 systems BUT it is intended mainly for use in mobile tablets - I see no particular reason to use it unless you can'r run Reader XI. Given it is mainly for use on mobile that can't use Flash, we aren't likely to ever see the development team spending their time on this.
If you want the latest and greatest - at least try Reader XI, not X! (Flash is a separate download, it will prompt).

Adobe bridges crashes when opening a video file

Adobe bridges crashes when opening a video file. i can open and view photos but not .mov files or any other video file

Just that one project, or any project? Can you create new projects?

Add Metadata, Options to Open in Adobe Media Encoder for Video Files

I was surprised to discover that some basic information about video files is not shown. For example, the duration of a QuickTime video is not shown.
Also, there is no option to open an MOV file in Adobe Media Encoder.
It would be nice to have this basic support for video.
David Salahi

removal of FLV and F4V export features from Adobe Media Encoder

Adobe Media Encoder CS5 hangs when adding files of varying HD resolutions.

I've seen questions similar to this related to CS4 but never explained very well, and my CS4 for mac worked fine. I am unsure if this is a new problem or a windows specific problem but here is the situation, if you need more information I will gladly provide it.
For the past week or so I have been encoding 1920x1080i mov files (h.264/aac) to 1280x720p (vp6/mp3) flvs. When I stick to that single HD format in the AMC processing que everything works great. However, when I add older HD content into the AMC que, content with non-standard presets, the program hangs. I tried to import about 15 files last night and the program just sat there all night in a '...NOT RESPONDING' state. The video's have different audio and video settings and it's little difficult to pinpoint exactly what they were. Some are 1440x1080, some are 1280x900, some have PCM audio some of mp3.
Now I temporarily resolved this issue by simply using cs4 master on my mac pro which worked great. However I have noticed a huge speed increase in CS5 64bit AMC. It takes 2-3 hours to encode 1 flash video on my mac pro (dual quad core xeon 2.9Ghz/32GB ram) with CS4. It takes ~20 minutes on my windows 7 station (single core 2 quad 3Ghz/8GB ram) with CS5.
How to replicate:
If I drop a single file into the AMC CS5 que, regardless of the resolution, frame rate, or sound codec; it will import. If I then add another file with a different resolution AMC will hang and become non-responsive. It never crashed but I can't wait 12+ hours to see if it accepted a job or not. As I said before this problem was not observed on CS4 for mac - it worked flawlessly, albeit a little slow.
Software used:
Adobe Media Encoder CS5 windows 64bit
Adobe Media Encoder CS4 mac 32bit
System specs:
Windows 7 home:
Core 2 quad 3Ghz
8GB ram
80GB SSD x25-m
nVidia Quadro 580
OSX 10.6.3:
Dual Xeon 2.99Ghz
32GB ram
4 7200 disks in 4TB raid 0
Radeon HD 2600
Matrox MAX h.264 compressor card
Any advice on this situation would be greatly appreciated. Thank you for your time
-Michael Emanuel

Hi Michael,
Sorry to hear you're having problems with Adobe Media Encoder. I'd like to get some more information about the problem so I can better understand your workflow, and potentially try to recreate the problem. For what it's worth, I often import files of different resolutions without any problem, so I want to find out what's different about how you're using AME.
Apologies for the long list of questions; the small details can be important.
-- After you import the first file, what else do you do in AME? Change the preset? Change the settings? Change the output destination?
-- What are the properties of the files that are causing the problem? You said it happens on "non-standard" files, but can you describe the specifications for one or more files that cause the problem? Please include file type, length, frame rate, frame dimensions, field order (if applicable), alpha mode (if applicable), and audio type and rate. If you know more the bitrate, both video and audio, that would be nice, too.
-- If any of the files are small enough, could you post a couple online that I could try on my machine?
-- How were these files generated? What application created them?
-- Where are the files stored? A local drive, a network drive, a removeable drive (USB or Firewire), etc.?
-- Which Adobe application or suite do you have installed? AME a limited set of options if you're using Flash or Web Premium compared to Master Collection, Production Premium, Premiere Pro, or After Effects.
-=TimK
-=Adobe Media Encoder QE

Adobe Media Encoder Doesn't recognize .prproj files

I am absolutely losing it here. I have read posts on various forums for hours, not only can I not find a solution, I can't find anyone who has this same problem. I'm running CS4 on a Mac and when I try to export from premiere, Adobe Media Encoder opens, then nothing happens. The file is never added to the queue, it just sits there. If I open Adobe Media Encoder manually then click add and try to select a premiere project, the file is grayed out. I changed the dropdown menu for file types to be "all types" and I click on a premiere file and it just pops up an error message saying the file cannot be imported. Same thing if I try to drag the file in. I can do absolutely nothing with AME.
I've seen plenty of people saying AME crashes midway through rendering or people saying they get an error saying to check if the source has been moved or deleted. I don't get any of that. I have nothing. It doesn't show up in the log or errors in any way.
The most annoying thing is that it used to work. I exported several files this way. I did not change any settings though, I even went and restored all the default settings. Still nothing. Its not just the one file, I've tried lots of different files, none work. I even reinstalled premiere, after effects, and AME and nothing changed.
I'm at a complete loss and I need to get work done and I wish I could post lots and lots of curse words here...

Hi,
I use CS3 on a PC so I've no experience with mac problems...
However, even if I had a mac I would ask you first a little more about your computer....
I have heard of memory chips going bad on a computer and suddenly that causes things not to work...but there's no sense just guessing...
Try to tell as much as you can about your computer and about the assets you are using.
Since it used to work and now it doesn't , can you think of anything you added or changed on the computer ?
Sometimes adding software or codec packs or hardware can sorta change things on your computer enough to make weird things happen...
Anyway, give as much info as you can
I think there's threads here about what sort of info would be best to supply if you don't know much about your computer ...
Rod

Why does Adobe Media Encoder fail to export Quicktime Files?

I'm using Adobe Media Encoder CC 2014 on a Windows 7 Pro 64 bit PC.
While exporting the Quicktime variant of H.264 for ATSC television broadcast files, Adobe Media Encoder fails. Non-Quicktime H.264's render correctly, but some television stations require quicktime.
Troubleshooting reveals the problem only occurs when attempting to make a 1920x1080 H.264 QuickTime file.
Using the same original file (1920x1080), Adobe Media Encoder WILL export a 720x480/486 H.264 MOV file.
More interesting still, it will ALSO export at 1280x720.
Testing this information to it's limits, I found that the cutoff for a successful render is between a frame size of 1610x906 and 1609x905.
Useless, random sizes, I know... but that's the breaking point for Adobe Media Encoder CS6 (6.0.3.1 to be precise) and H.264 Quicktime files.
Others are having a similar problem:
http://forums.creativecow.net/thread/3/934721#953485
This information did not correct the problem:
http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-warning-or.html
Any help or ideas are greatly appreciated.
OS: Windows 7 Professional 64-bit SP1
CPU: 41.6GHz (dual octo-core Intel Xeon E5-2670 @ 2.60GHz)
RAM: 64GB
GPU: NVIDIA Quadro 5000 v334.95 (2.5Gb GDDR5 RAM)
VID: Blackmagic Design DeckLink HD Extreme 3D+/Desktop Video v10.1.1
DRV: Facilis TerraBlock 16TB RAID/ATTO ExpressSAS R680 v2.19
NLE: Adobe Premiere Pro CC 2014
James Brady
Senior Editor
Results Video, Inc.
El Paso, Texas
http://www.resultsvideo.com

I'm trying to make a file with the extension ".MOV" using AME's "HD 1080i 29.97, H.264, AAC 48kHz" preset. AME fails every time with the following message:
"Encoding Failed
Export Error
Error compiling movie.
Unknown error."
Any other file extension (MP4, M4V, etc.) renders fine. The issue seems only to happen when attempting to make an MOV file. It doesn't seem to matter whether I use AME's built-in preset, or customize my own render settings--the problem always happens with any MOV larger than the size I mentioned above.
All of this used to work just fine on the same machine 2 years back with Adobe CS5, previous version of windows and QuicTime. I've been all through the Adobe and Windows possibilities, so I'm grabbing at straws here with QuickTime maybe having something to do with it.
Interesting.
Would you happen to know if Adobe has made any changes to its manner of muxing long-address MPEG-4 AVC data to the MOV file container? Since the MP4 and M4V files encode properly, have you tried opening these files in a media player and simply using the "Save As..." option to move the date to an MOV file container without transcoding audio or video data? I.e., is there any obvious relationship between the size of the MOV file encode (less than/greater than 4 GB) as a function of the resolution "break point" previously discovered?

How can I get Adobe Media Gallery for Bridge CS3

I want to create an online photo gallery for 3rd party client proofing. I am using a reference book byScott Kelby (the editor of 'Photshop User' magazine) and he refers to Adobe Media Gallery: ( Bridge CS3 / Windows / Workspace / Adobe Media Gallery).
He states that although AMG wasn't initially shipped with CS3, Adobe released a free update for bridge and once installed it is possible to download AMG from labs.adobe.com.
I am unable to find any reference to AMG or any download/upgrades
(Windows XP/ Bridge 2.1.1.9/ Ps CS3 Extended 10.0.1)

Good day Geoff,
You can download the Adobe Reader 10.0.0 installer .EXE file from here:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/AdbeRdr1000_en_US.exe
Once you've downloaded it, you can burn it to a disc or copy it to a thumbdrive to bring to the PC that's offline.
Please let us know if you have any questions.
Kind regards,
David

Adobe Media Encoder for AE export creates unwanted black background on load in white background

Hi. I have a seamless white website design. I added a white background to my AE file and also exported to Adobe Media Encoder with a white background, but I'm still getting a flash of black when the video loads. I have read discussions of this being a "bug" of the media encoder, but curious if anyone found a workaround. It's distracting to have the back load to black and then change to white, so I appreciate any recommendations. For now, my only idea it to re-record the video after the black flash, using a screen capture app, but this seems tedious and does not produce optimum results. Am I missing something?

Thanks for your reply!
I tried using Quicktime with PNG and it created a big file (1.18GB for a 1 minute long clip) that doesn't play back nicely in PPro unfortunately. But I then tried rendering the clip using a lossy format, H.264, in AE and it's playing back ok in PPro! I will just do that for the rest of the clips and hope that this is finally resolved. Many thanks for the tip!
Out of curisoty, do you know what might be causing the problem when I use Media Encoder?

Adobe Media Encoder won't open MPEG2 files

Hi All,
I'm hoping you can help me, I'm having some trouble with Adobe Media Encoder CS4, it won't open any MPEG2 files I throw at it.
They all open fine in Media Player Classic, MPC-HC and VideoLan, so I'm wondering what I'm doing wrong.
Any ideas greatfully appreciated.
Adobe Creative Suite 4 Design Premium
AME CS4 4.2.0.006
WinXP 64

Jim Simon, one came from a creative production house and a couple came from a website that provides various videos in various formats for testing video players.
Thanks for the information Colin Brougham. Can any MPEG 2 importers/decoders be used?
I'm new to AME so perhaps I don't understand how it works entirely but on the AME information page on the Adobe website it says that MPEG2 files can be imported, and there is no mention of only being able to do so with certain Adobe products (unless I missed it).
However, if I can open and play MPEG2 Files in various media players, surely there is a way to use the decoders from those to work with AME?
All advice greatly appreciated.

Why "Export Error Codec Initialization Problem!" when I export using Adobe Media Encorder for FLV?

I get "Export Error - Codec Initialization Problem!" when I try to export a project using Adobe Media Encoder as a Macromeida Flash Video. Premiere Pro 2.0 goes through the rendering process but no file is created; just the Export Error message. What does this mean, and what do I need to do to export a project as a FLV file?
Thanks.

Sounds weird... You could try the standard fix for general unexplained behaviour in a document; export it to idml, open that, save as an Indesign file and try exporting again. If that doesn't work try a few different presets, like smallest file size. If that doesn't work try opening your image in Photoshop, resaving as a psd, placing that (delete your old one) and see if that helps. Obviously do this on a copy....

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

Adobe Media Crashes for Panasonic MXF HD Files

Similar Messages

Maybe you are looking for