Can't install osx on 2009 macbook pro

Hey guys i'm haveing a nightmare getting osx reinstalled on my macbook pro, firstly i have no experance with mac's but have always wanted too so when offered this macbook pro i snapped it up even with a dead HDD thinking it to be a very easy fix, so replaced the drive with a new one and still can't install osx
anyway here's whats going on, i booted the macbook with the instalation dvd it loads up as it should but when you get to the select drive part nothing is there so googled a few things and found the drive has to be set-up first so entered disk utility to partition and format the drive but get an error with whatever i do, i have removed and reseated the HDD cable and memory and have tried booting with only one stick to see if there was an error with one of the sodimm's, i have also tried accessing the AHT but none of the ways i have found work............ please if anyone can help me, please let me know

Thanks for the reply mate, sorry to say i have tried every option in disk util i've even tied a couple of terminal commands to do the same thing with no luck, i have however been able to remove the partition but that's where the good news ends as i can't create a new one..... is there anyway to prep the disk in windows? as i don't have an external case or another mac?
also what are the chances of the HDD cable being at fault? after more googeling i found someone with the same sort of problem's as me and he ended up replacing the cable http://www.mac-forums.com/forums/apple-notebooks/237964-cant-partition-brand-new -hard-drive.html unfortunatly i don't have an apple store anywhere near me so thats not an option but it's something i could do myself, the only problem is i don't have the £18 for a new one right now as i've had to buy a HDD and charger as well as the macbook and it's left me a little skint lol

Similar Messages

Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.

can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?

I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
Can I start from USB Memory? with files from SL DVD? or have some thing else?
I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
Really Thanks for any help.
Pablo

Tried to install OSX on my macbook pro but install failed, now it won't restart

I Downloaded OSX onto my macbook pro and then I keep getting a message that installation failed. Now the machine is stuck in loop and won't go to my normal desktop screen.

To install Windows you can use Boot Camp Assistant or use a virtual machine like Parallels, Fusion, or VirtualBox. You can't install Windows as you described in your post.

After installing osx mavericks my macbook pro restarts all the time

after i installed osx mavericks my mackbook pro always restarts again and again
can someone help me?

I have the same problem with my 2012 imac.
Maverick is working great on two macbook airs but the imac crashs multiple times a day. It's killing me as it's our workhorse.

How to increase disk read and write speed after installing new SSD (2009 Macbook Pro)? Why not as fast as advertised?

Hi everyone,
I just installed a Crucial MX10512 GB SSD into my 2009 Macbook Pro. It's definitely much faster, but the read and write disk speed is around 200 Mb/s for both versus the 300-500 Mb/s that the SSD advertised. Any ideas as to why? And is there anything I can do to make it faster? Before I installed it, it was between 80-90 Mb/s.
Specs:
- currently have about 460 of 511 GB of storage available
- am using 2GB of memory
- running on 10.10.2 Yosemite
Thanks!

nataliemint wrote:
Drew, forgive me for being so computer-incompetent but how would I boot from another OS? And shouldn't I be checking the read speeds on my current OS (Yosemite) anyways because I want to know how the SSD is performing on the OS I use? And finally, what kind of resources would it be using that would be slowing down my SSD?
Sorry for all the questions - I'm not a Macbook wiz by any means!
You could make a clone of your internal OS onto an external disk. Hopefully you already have a backup of some form
A clone is a full copy, so you can boot from it. It makes a good backup as well as being useful to test things like this.
Carbon Copy Cloner will make one or you can use Disk Utility to 'restore' your OS from the internal disk to an external one.
Ideally the external disk is a fast disk with a fast 'interface' like Thunderbolt, Firewire 800 or USB3. USB2 can work, but it is slow & may effect the test.
You connect the clone, hold alt at startup & select the external disk in the 'boot manager'. When the Mac is finished booting run the speed tester.
Maybe this one…
https://itunes.apple.com/gb/app/blackmagic-disk-speed-test/id425264550
Test the internal & compare to the previous tests
A running OS will do the following on it's boot disk…
Write/ read cache files from running apps
Write/ read memory to disk if memory is running low
Index new files if content is changing or being updated
Copy files for backing up (Time Machine or any other scheduled tasks)
Networking can also trigger read/ write on the disk too.
You may not have much activity that effects a disk speed test, but you can't really be sure unless that disk is not being used for other tasks.
Disk testing is an art & science in itself, see this if you want to get an idea …
http://macperformanceguide.com/topics/topic-Storage.html
Simply knowing that it's about twice the speed would be enough to cheer me up

If I Buy Mountain Lion OS can I install it to my Macbook Pro and Macbook Air?

I'm planning to buy Mountain Lion OS.
Now I want to know if I can install it to my Macbook Pro and to my Sister's Macbook Air?

You can install it on any computer you own...
Providing the System Requirements are met...
Install Mountain Lion on multiple Computers
Log into App Store on your other Computer(s), being sure to use the Apple ID that Originally purchased ML...
Do you really want to give your sister your Apple ID... ML is only $20... Think about it...

HELP! I can't install OSX Mavericks on MacBook Air

Help! I just download and install OSX Mavericks on MacBook Air (2012), its already downloaded and installed but when booted, the wheels machine on the screen keep running. its even more an hour and i restarded it for severel times. but still not working. should I wait until the installation finished? for how long? 1, 2, or 3 hours?

Then the hard drive is corrupted. You will need to erase it then reinstall:
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

How can I install Windows 7 on Macbook Pro 17' (2009 model)?

I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Pease help ?

Let me get this - because the title misled me as to what you are asking, ie:
I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Does the above really tell the story?
The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors).

I bought a new HD to install into my 2009 macbook pro. I cannot find my install disk for Snow Leopard. Can I install one of the newer OS's without a disk?

Is there a way to either reinstall the OSX version that is currently on my Macbook Pro, onto the new HD or do I have to have the Snow Leopard disk and then upgrade to the newer versions all over again?

Depending on your processor and RAM installed, you can install lion from the app store under the apple drop down menu. You have to have at least 2 GB of RAM installed and you have to have an intel core 2 duo processor to run Lion. This you can find out in "About This Mac" under the apple drop down menu. That is the only OS that's newer than yours and one that isn't installed from a disc
hope this helps

"Mavericks OSX Can't Install Until Further Notice" MacBook Pro

I Have a MacBook Pro with a 2.5 GHz intel Core i5 With a memery of 4GB 1600 MHz DDR3 (I Don't know Why It says only 4GB's I Have more then that Cuz I download things that are 5GB's) This is a new computor 2014 with the Graphics card of Intel HD Graphics 4000 512 MB
Sorry If nothing make's sense I just really want to download Mavricks
If You Can Help Thanks!
P.S I am the operating system before Mavricks

Are you getting this error this error message when attempting to download from the App Store?
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store
Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support

Can I install Snow Leopard on MacBook Pro 2013

Can I install Snow Leopard on my new MacBook Pro 2013. I'm so tired of the UGLY grey icons. I keep thinking that the mail or iPhoto window is not the active one because everything is grey. I use Snow Leopard on my 27inch iMac and love it. Nice RED delete button for mail, etc. Thanks

Firmware restrictions prevent directly loading any OSX earlier than what came with the system.
The *only* way around is to load SnowLeopard *Server* (not Client) into a virtual machine (Parallels, VMWare Fusion, VirtualBox). But that costs $20+shipping/tax for the disk and is a learning curve into SL Server. And you *still* need your host OSX to run it, and the VM will not most efficiently use the hardware resources.

Can't install Windows on 2013 MacBook Pro

I'm attempting to install 64-bit Windows 8.1 Pro on my 2013 Retina MacBook Pro (15", high end) and running into the same issues that I've seen others have in the past. The main issue is that I get the error "Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation." after the installation completes. I've tried other suggestions that I've found online:
Don't use Boot Camp Utility at all, partition the disk with Disk Utility
Format with Windows diskpart
Assign a letter to the EFI partition (B:) to make sure Windows can see it
Partition the disk with gdisk
Use USB 2.0 and 3.0 flash drives
Use both USB ports
Nothing I've done seems to work. Even just wiping the entire drive and trying to install Windows entirely on it's own fails with the same error. I can't even install Windows in BIOS mode (not that I'd want to) because the disk is GPT formatted. I know I could use something like gdisk to force the disk to have a hybrid MBR, but that's a hacky workaround for an inferior solution.
I've read (and tried) the solutions in the 40-page thread from the end of last year, but it doesn't seem to have been updated in a few months. Is there a special method to install Windows on these new MacBooks?

Ok will not work without a fresh install
Restart holding down command R, use disk utility to completely erase the drive and return drive to single Mac journaled partition
Install OSX to this drive
Once OSX is running, restart and do a PRAM reset
Then open disk utility and repair permissions TWICE
Run boot camp assistant and let it do everything, create ISO, DL windows support and install Windows
If you need a clean 8.1 ISO, go http://getintopc.com/softwares/operating-systems/windows-8-1-download/
Good luck

Can't install OSX on a Macbook with Windows XP!! alone on it

Hey,
I have a Macbook pro on which i have only Windows XP . I want to install OS X10.5 on it and by no means i can boot the machine from DVD.
I have tried the this below,
1. To boot on Safe mode - dint work
2. To boot in Single user mode - dint work
3. Tried to open Firmware command-option-O-F - dint work
4. Tried to boot from DVD using 'C' -Dint work
5. Clicked 'options' button on boot, it will show, windows partition and CD but when i click on CD it will get stuck
Is there anyway, i can boot from Mac OS x 10.5 DVD and install it on this machine?
Thanks.

If the machine is older than December 15, 2008, it may use the 10.5.6 retail installer shown on this tip, and possibly the 10.5.4, or 10.5.1, or 10.5.(0) retail installers depending on its age:
https://discussions.apple.com/docs/DOC-2275
If the machine is newer than December 15, 2008, you must the 10.5 installer that came with it.
If the machine is newer than August 28, 2009, it won't support 10.5 at all, except possibly 10.5 Server. Check the 10.5 server forum if that might be something that you are willing to consider. Most everything that runs in 10.5 can in 10.6.
If the machine is newer than July 20, 2011, it can't run 10.6 at all, and must run 10.7 when it comes to Mac OS X client. Again server editions may run as well. The server forums are here: https://discussions.apple.com/community/servers_enterprise_software

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

How can i install windows 7 on macbook pro lion from usb?

hello am sorry to disturb you
i would like to know the above question since i have looked almost everywhere and i have received no answer
i have a macbook pro i5 with lion
i have been trying for month to install windows 7 as a secondary boot to my mac
but i haven't been able to
things that i have done
-i had downloaded win7 iso
-using another computer i installed win7 on the usb { win to flash }
-i have used bootcamp assistant but apparently i need a dvd of win7 which i currently don't have
-i have installed Reffit but i always get a flashing screen when try to load windows
please i hope you can reply me back if possible
my thoughts are
is that apple disabled the efi on lion to not be able to boot from usb flash drive
my reasoning to this is that is used to work on leopard but not lion
again am trying to boot from usb not burn a disc
please help att alcidio

Rule #1 that TP missed: ISO have to be burned at SLOWEST 2X burn speed to work.
There is/was a long thread but booting Windows from USB-DVD or flash is hit or miss, it may work. USB-DVDs often do not but it is possible to edit the plist to add the Mac ID string to it.
Boot Camp Assistant -
create a partition (done)
download Windows Support Software (drivers to install after Windows is running) (done)
Start the install and boot process - not really needed or essential
And you can use Paragon, you can use Windows 7 or later DVD and do entire install (but on a dedicated 100% Windows hard drive).
Flash drive: has to be MBR and FAT or NTFS (I think, sounds right) same for putting Apple drivers on flash card for which there is an Apple Tech Article.

Can't install osx on 2009 macbook pro

Similar Messages

Maybe you are looking for