Adobe releases 64bit Flash player 10 Alpha
Furthering Adobe's commitment to the Linux community and as part of ongoing efforts to ensure the cross-platform compatibility of Flash Player, an alpha version of 64-bit Adobe Flash Player 10 for Linux operating systems was released on 11/17/2008 and is available for download. This offers easier, native installation on 64-bit Linux distributions and removes the need for 32-bit emulation
http://labs.adobe.com/technologies/flashplayer10/
http://bbs.archlinux.org/viewtopic.php?id=59149
http://bbs.archlinux.org/viewtopic.php?id=59147
Similar Messages
-
Adobe: No Linux Flash Player Till 2007
see
http://www.crn.com/sections/custom/custom.jhtml?articleId=192501179
>>
Adobe: No Linux Flash Player Till 2007
By Stacy Cowley, CRN
2:25 PM EDT Fri. Sep. 01, 2006
Impatient Linux users will have to wait till the end of the
year for even a
preview release of Adobe's Flash Player 9.
The company's lead Flash for Linux engineer, Mike Melanson ,
reported this
week in his blog that Adobe won't release any alpha versions
of its Flash
port, holding out instead for a full-featured beta scheduled
for release
sometime late this year.
Adobe recently released a major Flash overhaul, version 9,
for Windows and
Macintosh clients. For Linux users, the release lengthened
the Flash gap
between them and other users: Adobe skipped Flash Player 8
for Linux and
hasn't released a Linux update since mid-2004. Because Flash
is not fully
backward-compatible, Web content developed for the newer
Flash players often
won't run in version 7, the most current Linux version.
Adobe's market
research shows that 86 percent of U.S. computer users are
able to view Flash
8 content.
"I have to question a cross-platform strategy that has a bias
against one
platform," RedMonk analyst Stephen O'Grady, a Linux user,
gripped in his
blog. The lack of a modern Flash player leaves him unable to
view content on
a number of Web sites, including major destinations like
ESPN.com.
An Adobe spokesman said the company expects a full release of
Flash Player 9
for Linux in early 2007. Because of the "short" cycle between
Flash Player 8
and 9 -- ten months -- Adobe opted to skip version 8 for
Linux and move
directly to version 9, he said.
Melanson's blog tracks the day-to-day progress and decisions
Adobe is making
on Flash for Linux. A full-time Linux user since 1999,
Melanson shares the
frustration of his comrades about Adobe's Linux lag.
"In September, 2005, I happened [across a blog that]
mentioned in passing
that Macromedia was looking for someone to port Flash Player
to Linux. I
applied for the job and now here I am," he posted.
"When I started at Adobe, I found out that there is a shadow
cabal of
engineers that very much want to see the current Flash Player
run on Linux,
and would even try their hand with the current codebase from
time to time.
But there are only so many hacking hours in the day."
>>> It sounds to like Adobe are using outdated development
practices.
> The kinds of systems multiplatform developers use these
days
That's the point .. 'these days'.
Much of the problem is older code, must be over a decade old
now) which was
not well written. That is not an uncommon occurence in
products that have
such a long existence as flash player. Supported platforms,
development
techniques, developer guidelines, management etc all change
over the years
and things that seemed 'a good idea at the time' end up
becoming a problem.
In hindsight there would be many things that should have been
done
differently in the past .. but without a working time-machine
that cannot be
fixed, without an enormous investment in development to
rewrite the code
base in a manner that can be more easily ported .. which is
what is
happening.
Also the low level optimisations required for such
cpu-intense real-time
graphic processing are difficult to port, as they rely on
optimised assembly
code for different cpus and chipsets
And further there is the issue of different operating systems
and libraries
to link against on different platforms.
> nightly/daily automated builds
Anyone who thinks supporting new platforms its just a matter
of re-building
or doing daily builds is naive. There is no indication that
Adboe does not
make use of these practices. But continuous integration and
nightly builds
are only tools to maintain a port once it is done .. it
doesn't help you DO
the port in the first place.
> From a marketing point of view you want a simultaneous
release on all
> platforms
I'm sure Adobe DO want simulataneous release .. if it were
possible. But
that is not possible if the software is not ported to all the
platforms.
With it ported to the platforms the vast majority of people
use (windows and
mac) it makes sense to release the newer versions that are
required in order
to release other major revenue-earning products like Flex.
That is a valid
and sound marketting and financial decision.
> In the case where assembly
> programming is used compiler intrinsics are more
maintainable and portable
> than
> inline assembly, I can vouch for their high performance
vs hand tuned
> assembly.
You simply cannot get the performance demanded using
intrinsics.
> Note that Apple uses gcc and Linux uses gcc and so I
can't see many
> incompatibilities at the compiler tools level?
> Maybe it is lack of experience
> with Linux, or maybe there have been lots of programmers
leaving since
> Adobe
> took over?
It may be worth your while reading the blogs by the adobe
developers where
they discuss the issues and get feedback from people such as
yourself.
> On the subject of buisness priorities, the number one is
that the customer
> comes first.
Exactly .. so MM/Adobe got the player out as quickly as
possible for the
majority of their customers. Making EVERYONE have to wait
while the player
was ported to all the other minority platforms would NOT have
been good for
the majority.
As they say .. you can't please all the people all the time.
You have to
pick you battles.
> In particular where websites are concerned you want to
get access
> to as many users as possible.
Exactly .. and FlashPlayer penetration and usage stats reveal
that it IS
availble to the vast majority of users and moreso than most
other
multi-media technologies
> The quoted 86 percent of users able to view flash 8
content is probably
> an over estimate and this figure is only stated for the
US
> as most of work in a global marketplace these days
figures like this are
> not very usefull.
Have you even looked at all the figures (which you don't seem
to believe
anyway) .. its worldwide and broken down into regions.
> The internet is all about maximising your potential
customer
> base and anything which prevents a siginificant minority
just makes no
> buisness
> sense at all.
Its only significant when you are part of it :) The vast
majority of
people, and those with the money to spend, are using Windows
and Mac.
That's where the customer base is.
> The bad publicity that Adobe has generated from
delaying/canning
> a Linux version of flash player is cumulative and the
internet is all
> about
> word of mouth. I hope for Adobe's sake they don't
neglect their customers
> needs
> in future.
I'm sure they won't .. which is why they are still activly
porting to other
platforms.
I would much rather see them take the time to do it right,
rather than let
quality slip in order to rush out a half-done product to
satisfy the demands
of the few.
Jeckyl -
Will there be a 64bit Flash Player?
Since Windows 7 has been out for several months now and running 64bit, is there a 64bit Flash Player in the near future?
The reason the question has been asked again and again is because we have been browsing these forums for years (in my case, at least 4 years) looking for a better answer. Adobe's claims of commitment to a true 64-bit release are about as believable as BP's claims of commitment to cleaning up the Gulf. Perhaps we need to rephrase the question.
Do you have any 32-bit PC's in-use at your home or office?
Do you have any friends who use 32-bit PC's ?
Have you ever met anyone in passing who is using a 32-bit PC ?
I think I may still have some 32-bit processors and boards sitting on the shelf that I haven't thrown out yet, but that's just laziness on my part. Maybe I can fire up a Commodore 64 emulator and run Flash Player on that. Sorry for the sarcasm but in all fairness ADOBE made the claim years ago that 64-bit flash was in the pipeline. Its borderline false-advertising..although FP is free the content creation tools are not, and I am sure many developers are expecting that their content will be available to eyeballs with as little hassle as possible. -
After Flash 11 install: Adobe Connect requires Flash Player 10.1 or above.
Adobe Connect will not run on my XP Pro workstation. Flash (11.1.102.63) has been installed several times, with and without AVG. We get the Flash Successful Installation Screen, try to launch Connect again, and always bounce right into the same message:
Adobe Connect requires Flash Player 10.1 or above.
Its like the system is not recognizing the Flash install. How do we get beyond this? Thanks for your help!John
I have tried to invite my sister-in-law to join me in a Connect Now meeting. Every time she tries to respond to the dialogue box that comes up when she clicks on the hyperlink I send her, she gets a message saying that she has to install Flash Player. We have tried doing this on a number of occasions, but always end up with the same response.
I've noted from your advice above that Internet Explorer and Google Chrome require different versions of Flash Player. She tells me she has both browsers on her machine. From the description she has given me, she appears to have downloaded both versions of Flash Player.
Despite the fact that it appears she has now install both versions of Flash Player, however, she is still getting the same request to install Flash Player when she responds to my hyperlink request.
Please help.
As my sister-in-law is not technically minded, a simplified set of instructions would be appreciated.
With my thanks and kind regards,
Nicholas. -
Why doesn't ADOBE provide a flash player for Windows 8 phone?
I'm in school(CTU online). I can't watch the live chat because ADOBE connect requires flash player. ADOBE needs to fix this problem.
Adobe discontinued its support for all mobile flash players a long time ago, so there will never be a flash player for Windows Phone 8.
-
Problems with Adobe Reader and Flash Player
I had an Adobe update last Monday and, ever since then, I can't view documents (eg credit card statements) on screen and sites that I previously visited regularly without problem suddenly say that I need to have Adobe Flash Player installed. I've downloaded Adobe Flash Player and it says it's installed correctly but when I return to the site, it still says I need Adobe Flash Player. I've also tried doing an uninstall first and then an instal but the same thing happens. I've run disk first aid and it found a problem with the Head which it fixed but I still can't open documents using Adobe in Safari. Adobe Plug ins tells me that the Internet Access plug in is not loaded but when I ran 'repair Adobe Reader installation", it said there were no missing components detected and repair was not needed. I don't know if it's relevant but I've been having problems with Safari for several weeks, quitting 3 or 4 times a day, mainly when I'm switching from Safari to another programme such as Entourage or Excel.
Message was edited by: Aileen2Hi Carolyn
I don't think I made it clear on the original post that I'm having problems with both Adobe Reader AND Adobe Flash Player. Unfortunately, all the Adobe Reader sites are confidential so I can't give you an illustration on that but for the Adobe Flash Player, try www.jacquielawson.com/ - you can preview cards without being signed in. With the Adobe Reader problems, I get a picture of a blank 'piece of paper' with a small blue square in the top right hand corner that has a white question mark inside it. The first time this happened to me, I was on the UK Inland Revenue site trying to print out some end of year forms. I phoned the Revenue's helpline and they said to try doing a 'save as' to my desktop. It seemed bizarre - saving a blank piece of paper - but lo and behold, when I opened it on my desktop, the forms appeared exactly as normal. However, I've since tried this 'save as' technique with my credit card statement and I still get a blank piece of paper with a blue square and white question mark when I open the desktop copy.
Thanks for your help and patience. I really appreciate it.
Aileen -
Adobe 10.2 flash player doesn't work on some site with diff browsers
WTF! I've been through every forum about new adobe flash player it doesnt work on some site i.e facebook, ustream, fox news, dailymotion and cartoon network...Nobody, not even adobe has a real solution to this problem! Some site stream good other don't at all. All I get is a blue box in the display sometimes it loads, but doesn't play the video or games. Updated Java and SWF and by the way this a brand new computer fresh out the box WIN7 64 worked before why not now! I've reinstall and uninstall, checked active X java scripting, and global settings and so on, but nothing seems to work. WHY? Global settings doesn't work for some unknown reason can't enable some of the settings. Everything work fine on my PC before the update, so go figure adobe. No! browser works with the new flash player properly. Fire, IE, Safari, and Opera none of these browser work with the flash player like it should! HELP!!! "I see why apple doesnt wont to have anything to do with adobe flash."
I don't understand - in your post you mention "new Flash Player" several times, but in the subject you mention 10.2...?
What is the exact FP version you have?
For your blue box problem, have you tried to disable Hardware Acceleration? -
We want to maintenance the adobe products in the enterprise environment. Specially Update for he reader and players.
ThanksYou will need to apply for both Reader and Flash Player Distribution agreements if you intend on enterprise deployments of these products.
Adobe - Adobe Runtimes / Reader Distribution License Agreement
If you are using SCCM and SCUP then use the available catalogs for both products.
11 SCCM-SCUP — Enterprise Administration Guide
Flash Player enterprise deployment | Adobe Developer Connection -
[ADOBE] Resolving Windows Flash Player permission-related issues 9/2007
Printable, formatted versions of these steps, valid as of
9/15/2007 are available. I recommend printing them and following
along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
TWO: Registry Permission Problems
We have been working on Flash Player failures caused by
Windows System Registry issues. We have not been able to determine
what’s causing these permissions to change. But that change
prevents the successful installation of Flash Player ActiveX
control (used by IE Windows).
Registry permission problems can be resolved using a tool
called SubInACL, built by Microsoft to correct system registry
issues.
Symptoms: What to look for:
1. If you install Flash Player on IE and are unable to see
Flash content on any webpage
2. After installation C:\WINDOWS\system32\Macromed\Flash
will have flash 9c.ocx in it but it failed to register
3. It appears that Flash Player installed correctly, but
unable to view Flash content
4. Flash Player works on other browsers, but NOT Internet
Explorer
5. If you are missing groups in HKEY_CLASSES_ROOT Advanced
Permissions
6. If you have run registry cleaners in the past, this may
have corrupted your system
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
For Vista
Compare your permissions with the ones in this screenshot.
http://www.supportflash.com/vista_key.png
For Window XP Pro or other flavors of XP
Compare your permissions with the ones in this document
“Troubleshooting system registry issues that prevent Flash
Player installation” (scroll down to the bottom of page).
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400116
Notice any major differences, missing groups, incorrect
permissions?
How can you repair the System Registry, what's the fix
Download SubInACL from Microsoft to fix permission issues
that prevent the Flash Player Installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
NOTE: The Microsoft version of the .cmd script run by
SubInACL is not be run on any XP version other than Pro. HOWEVER,
the Adobe .cmd script in the above technote is tested safe for ALL
VERSIONS OF XP!!!
If you have a Windows System Registry permission issue that
sounds like the one described above, SubINACL may be the solution.
Please note that if you have this issue on multiple accounts on one
machine you’ll need to fix each account individually.quote:
Originally posted by:
BWolfe [ADOBE]
Printable, formatted versions of these steps, valid as of
9/15/2007 are available. I recommend printing them and following
along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
Hi Bentley
I've been having trouble with this for months and Asia
Pacific support has been no help at all, now they are telling me
that it it's a problem with my computer and they can't help me.
I tried the first step above and it does seem that I have a
locked component left over I think it is falsh9e.ocx. The version
is 9.0.115.0 is the trouble is I can't complete the fix. Can you
send me some detailed instructions to complete the step.
This has been very frustrating and your assistance would be
greatly appreciated.
Doogs -
This is the way the problem appears:
So I click the download flash player and go through the steps to install. Install as directed,And yet I still get the original problem.
I have rebooted my computer to make sure that it doesn’t need a reboot to activate the files installed etc.
I have removed flash player and completely reinstalled it.
I have also visited your site and you diagnostic says I haven’t an up to date version, but I have downloadeded it. as you can see above I have downloaded it.
I am using
- Windows 7 Home edition, with Service Pack 1
- Active X version 11.5
Any ideas what the problem is?
Thanks!First things first....How did you uninstall? Did you use the Flash Player uninstall utility available on the Adobe site?
Try this first and let us know what the results are....
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
My best guess is you now have multiple versions installed. -
Adobe reader and flash player can't be installed any more on 10.8.5
I am working with 10.8.5 since many months all right. After the last note from adobe to update my flash player i updated it as told. Unfortunately while installing there came a message "adobe installer was quit unexpected".
I tried to uninstall the old version with the adobe uninstaller. I can not install this one also, same message.
Now my reader and flash player don't work.
How can i manage to install them again?
Thanks for some help!! MikeThen post your question on the Adobe forums since it's their software you're having problems with. This forum is for troubleshooting Apple Software Update for Windows, and not related to Adobe in any way...
http://www.adobeforums.com -
When will Adobe upgrade the flash player For PS3?
??????????????
Battery life is but one of many reasons Apple didn't approve of a Flash player for iOS. However, as stated by Stedman1, Adobe has stopped future development of all mobile flash players, not just iOS.
There are some third party apps in the App store that will allow some flash content to be utilized. Puffin, Skyfire Photon, Playable, are just a handful of the apps available in the App Store. Feel free to try out some of those, but read the descriptions and reviews first to make sure it will allow the types of content that you are hoping to access. -
This excuse that consumes a lot of battery unconvincing, until the android supports flash.
Battery life is but one of many reasons Apple didn't approve of a Flash player for iOS. However, as stated by Stedman1, Adobe has stopped future development of all mobile flash players, not just iOS.
There are some third party apps in the App store that will allow some flash content to be utilized. Puffin, Skyfire Photon, Playable, are just a handful of the apps available in the App Store. Feel free to try out some of those, but read the descriptions and reviews first to make sure it will allow the types of content that you are hoping to access. -
About installing adobe air and flash player
How do I get the adobe flash player and air on my Iphone 5C from a public computer//
You don't need AIR runtime on iOS; see http://www.adobe.com/devnet/air/articles/air-on-ios-faq.html#b
-
Adobe AIR skips Flash Player security sandbox
When I installed the first Adobe AIR Showcase demo, I felt
curious about how will it install itself from inside Flash Player
sandbox. So I clicked "install", and it really installed something
on my own \Program Files ! without my confirmation
How can it be possible, I thought Flash Player had a sandbox
but it looks as it adoble is able so skip it.
If it is publicly available (and not a backdoor), I could use
it to install some ActiveX controls my web application needs to
interact with Excel.
I checked the flash player 9 security pdf document, and it
looks as it flash documents should not be able to write anything to
my local disk.
Regards,
Daniel MonteroYou don't need AIR runtime on iOS; see http://www.adobe.com/devnet/air/articles/air-on-ios-faq.html#b
Maybe you are looking for
-
After upgrading to 10.9.5 on iMac, App Store is not working
Hi, please help me solve this... I upgraded from 10.6.8 to 10.9.5 After that I cannot open Appstore at all, after I click on the icon it does not load at all. Also, when using Mail app, It downloads all emails from server, when I click on a message,
-
How to apply a master template in a built webI report
Hi Experts, I have around 60 webI reports already built in WebI (BO 4.0 with BICS conection). Now, my client wish to change the lay out in order to adapt to new visual requirements. I was wondering if is there any way to apply a master template and m
-
ORA-01435: user does not exist when using imp utility
I installed Oracle 8.1.7.0.0 successfully on WINDOWS 2000 and created a database TEST using DBCA. Then I used a script to creat a tablespace and a user in TEST databse. I could use the imp utility to import the data (a dmp file) to the TEST database
-
How do I turn a photo to Portrait?
Hello, I've been using iWeb to create my new site. Everything has been going well, except when I create a photo page, my photos are inserted in "Landscape" even though in iPhoto I had already turned the photo to "Portrait". Can anyone assist in how I
-
Macbook Air Won't Start Correctly
WHello. I have the previous version of the Macbook Air. When i turn it on, everything seems to be normal. I input my username and password and login. But then, the icons on my desktop won,t show up. The dock and the top tab is in place. The computer